| /* |
| * MPC83xx/85xx/86xx PCI/PCIE support routing. |
| * |
| * Copyright 2007-2012 Freescale Semiconductor, Inc. |
| * Copyright 2008-2009 MontaVista Software, Inc. |
| * |
| * Initial author: Xianghua Xiao <x.xiao@freescale.com> |
| * Recode: ZHANG WEI <wei.zhang@freescale.com> |
| * Rewrite the routing for Frescale PCI and PCI Express |
| * Roy Zang <tie-fei.zang@freescale.com> |
| * MPC83xx PCI-Express support: |
| * Tony Li <tony.li@freescale.com> |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/fsl/edac.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/memblock.h> |
| #include <linux/log2.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/suspend.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/machdep.h> |
| #include <asm/mpc85xx.h> |
| #include <asm/disassemble.h> |
| #include <asm/ppc-opcode.h> |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| |
| static int fsl_pcie_bus_fixup, is_mpc83xx_pci; |
| |
| static void quirk_fsl_pcie_early(struct pci_dev *dev) |
| { |
| u8 hdr_type; |
| |
| /* if we aren't a PCIe don't bother */ |
| if (!pci_is_pcie(dev)) |
| return; |
| |
| /* if we aren't in host mode don't bother */ |
| pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); |
| if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) |
| return; |
| |
| dev->class = PCI_CLASS_BRIDGE_PCI << 8; |
| fsl_pcie_bus_fixup = 1; |
| return; |
| } |
| |
| static int fsl_indirect_read_config(struct pci_bus *, unsigned int, |
| int, int, u32 *); |
| |
| static int fsl_pcie_check_link(struct pci_controller *hose) |
| { |
| u32 val = 0; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) { |
| if (hose->ops->read == fsl_indirect_read_config) |
| __indirect_read_config(hose, hose->first_busno, 0, |
| PCIE_LTSSM, 4, &val); |
| else |
| early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); |
| if (val < PCIE_LTSSM_L0) |
| return 1; |
| } else { |
| struct ccsr_pci __iomem *pci = hose->private_data; |
| /* for PCIe IP rev 3.0 or greater use CSR0 for link state */ |
| val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK) |
| >> PEX_CSR0_LTSSM_SHIFT; |
| if (val != PEX_CSR0_LTSSM_L0) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| |
| if (fsl_pcie_check_link(hose)) |
| hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; |
| else |
| hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK; |
| |
| return indirect_read_config(bus, devfn, offset, len, val); |
| } |
| |
| #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) |
| |
| static struct pci_ops fsl_indirect_pcie_ops = |
| { |
| .read = fsl_indirect_read_config, |
| .write = indirect_write_config, |
| }; |
| |
| static u64 pci64_dma_offset; |
| |
| #ifdef CONFIG_SWIOTLB |
| static void setup_swiotlb_ops(struct pci_controller *hose) |
| { |
| if (ppc_swiotlb_enable) { |
| hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb; |
| set_pci_dma_ops(&powerpc_swiotlb_dma_ops); |
| } |
| } |
| #else |
| static inline void setup_swiotlb_ops(struct pci_controller *hose) {} |
| #endif |
| |
| static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) |
| { |
| if (!dev->dma_mask || !dma_supported(dev, dma_mask)) |
| return -EIO; |
| |
| /* |
| * Fix up PCI devices that are able to DMA to the large inbound |
| * mapping that allows addressing any RAM address from across PCI. |
| */ |
| if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) { |
| set_dma_ops(dev, &dma_nommu_ops); |
| set_dma_offset(dev, pci64_dma_offset); |
| } |
| |
| *dev->dma_mask = dma_mask; |
| return 0; |
| } |
| |
| static int setup_one_atmu(struct ccsr_pci __iomem *pci, |
| unsigned int index, const struct resource *res, |
| resource_size_t offset) |
| { |
| resource_size_t pci_addr = res->start - offset; |
| resource_size_t phys_addr = res->start; |
| resource_size_t size = resource_size(res); |
| u32 flags = 0x80044000; /* enable & mem R/W */ |
| unsigned int i; |
| |
| pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", |
| (u64)res->start, (u64)size); |
| |
| if (res->flags & IORESOURCE_PREFETCH) |
| flags |= 0x10000000; /* enable relaxed ordering */ |
| |
| for (i = 0; size > 0; i++) { |
| unsigned int bits = min_t(u32, ilog2(size), |
| __ffs(pci_addr | phys_addr)); |
| |
| if (index + i >= 5) |
| return -1; |
| |
| out_be32(&pci->pow[index + i].potar, pci_addr >> 12); |
| out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); |
| out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); |
| out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); |
| |
| pci_addr += (resource_size_t)1U << bits; |
| phys_addr += (resource_size_t)1U << bits; |
| size -= (resource_size_t)1U << bits; |
| } |
| |
| return i; |
| } |
| |
| static bool is_kdump(void) |
| { |
| struct device_node *node; |
| |
| node = of_find_node_by_type(NULL, "memory"); |
| if (!node) { |
| WARN_ON_ONCE(1); |
| return false; |
| } |
| |
| return of_property_read_bool(node, "linux,usable-memory"); |
| } |
| |
| /* atmu setup for fsl pci/pcie controller */ |
| static void setup_pci_atmu(struct pci_controller *hose) |
| { |
| struct ccsr_pci __iomem *pci = hose->private_data; |
| int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; |
| u64 mem, sz, paddr_hi = 0; |
| u64 offset = 0, paddr_lo = ULLONG_MAX; |
| u32 pcicsrbar = 0, pcicsrbar_sz; |
| u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | |
| PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; |
| const u64 *reg; |
| int len; |
| bool setup_inbound; |
| |
| /* |
| * If this is kdump, we don't want to trigger a bunch of PCI |
| * errors by closing the window on in-flight DMA. |
| * |
| * We still run most of the function's logic so that things like |
| * hose->dma_window_size still get set. |
| */ |
| setup_inbound = !is_kdump(); |
| |
| if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) { |
| /* |
| * BSC9132 Rev1.0 has an issue where all the PEX inbound |
| * windows have implemented the default target value as 0xf |
| * for CCSR space.In all Freescale legacy devices the target |
| * of 0xf is reserved for local memory space. 9132 Rev1.0 |
| * now has local mempry space mapped to target 0x0 instead of |
| * 0xf. Hence adding a workaround to remove the target 0xf |
| * defined for memory space from Inbound window attributes. |
| */ |
| piwar &= ~PIWAR_TGI_LOCAL; |
| } |
| |
| if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { |
| if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { |
| win_idx = 2; |
| start_idx = 0; |
| end_idx = 3; |
| } |
| } |
| |
| /* Disable all windows (except powar0 since it's ignored) */ |
| for(i = 1; i < 5; i++) |
| out_be32(&pci->pow[i].powar, 0); |
| |
| if (setup_inbound) { |
| for (i = start_idx; i < end_idx; i++) |
| out_be32(&pci->piw[i].piwar, 0); |
| } |
| |
| /* Setup outbound MEM window */ |
| for(i = 0, j = 1; i < 3; i++) { |
| if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) |
| continue; |
| |
| paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); |
| paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); |
| |
| /* We assume all memory resources have the same offset */ |
| offset = hose->mem_offset[i]; |
| n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset); |
| |
| if (n < 0 || j >= 5) { |
| pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); |
| hose->mem_resources[i].flags |= IORESOURCE_DISABLED; |
| } else |
| j += n; |
| } |
| |
| /* Setup outbound IO window */ |
| if (hose->io_resource.flags & IORESOURCE_IO) { |
| if (j >= 5) { |
| pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); |
| } else { |
| pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " |
| "phy base 0x%016llx.\n", |
| (u64)hose->io_resource.start, |
| (u64)resource_size(&hose->io_resource), |
| (u64)hose->io_base_phys); |
| out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); |
| out_be32(&pci->pow[j].potear, 0); |
| out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); |
| /* Enable, IO R/W */ |
| out_be32(&pci->pow[j].powar, 0x80088000 |
| | (ilog2(hose->io_resource.end |
| - hose->io_resource.start + 1) - 1)); |
| } |
| } |
| |
| /* convert to pci address space */ |
| paddr_hi -= offset; |
| paddr_lo -= offset; |
| |
| if (paddr_hi == paddr_lo) { |
| pr_err("%pOF: No outbound window space\n", hose->dn); |
| return; |
| } |
| |
| if (paddr_lo == 0) { |
| pr_err("%pOF: No space for inbound window\n", hose->dn); |
| return; |
| } |
| |
| /* setup PCSRBAR/PEXCSRBAR */ |
| early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); |
| early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); |
| pcicsrbar_sz = ~pcicsrbar_sz + 1; |
| |
| if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || |
| (paddr_lo > 0x100000000ull)) |
| pcicsrbar = 0x100000000ull - pcicsrbar_sz; |
| else |
| pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; |
| early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); |
| |
| paddr_lo = min(paddr_lo, (u64)pcicsrbar); |
| |
| pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar); |
| |
| /* Setup inbound mem window */ |
| mem = memblock_end_of_DRAM(); |
| pr_info("%s: end of DRAM %llx\n", __func__, mem); |
| |
| /* |
| * The msi-address-64 property, if it exists, indicates the physical |
| * address of the MSIIR register. Normally, this register is located |
| * inside CCSR, so the ATMU that covers all of CCSR is used. But if |
| * this property exists, then we normally need to create a new ATMU |
| * for it. For now, however, we cheat. The only entity that creates |
| * this property is the Freescale hypervisor, and the address is |
| * specified in the partition configuration. Typically, the address |
| * is located in the page immediately after the end of DDR. If so, we |
| * can avoid allocating a new ATMU by extending the DDR ATMU by one |
| * page. |
| */ |
| reg = of_get_property(hose->dn, "msi-address-64", &len); |
| if (reg && (len == sizeof(u64))) { |
| u64 address = be64_to_cpup(reg); |
| |
| if ((address >= mem) && (address < (mem + PAGE_SIZE))) { |
| pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn); |
| mem += PAGE_SIZE; |
| } else { |
| /* TODO: Create a new ATMU for MSIIR */ |
| pr_warn("%pOF: msi-address-64 address of %llx is " |
| "unsupported\n", hose->dn, address); |
| } |
| } |
| |
| sz = min(mem, paddr_lo); |
| mem_log = ilog2(sz); |
| |
| /* PCIe can overmap inbound & outbound since RX & TX are separated */ |
| if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { |
| /* Size window to exact size if power-of-two or one size up */ |
| if ((1ull << mem_log) != mem) { |
| mem_log++; |
| if ((1ull << mem_log) > mem) |
| pr_info("%pOF: Setting PCI inbound window " |
| "greater than memory size\n", hose->dn); |
| } |
| |
| piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); |
| |
| if (setup_inbound) { |
| /* Setup inbound memory window */ |
| out_be32(&pci->piw[win_idx].pitar, 0x00000000); |
| out_be32(&pci->piw[win_idx].piwbar, 0x00000000); |
| out_be32(&pci->piw[win_idx].piwar, piwar); |
| } |
| |
| win_idx--; |
| hose->dma_window_base_cur = 0x00000000; |
| hose->dma_window_size = (resource_size_t)sz; |
| |
| /* |
| * if we have >4G of memory setup second PCI inbound window to |
| * let devices that are 64-bit address capable to work w/o |
| * SWIOTLB and access the full range of memory |
| */ |
| if (sz != mem) { |
| mem_log = ilog2(mem); |
| |
| /* Size window up if we dont fit in exact power-of-2 */ |
| if ((1ull << mem_log) != mem) |
| mem_log++; |
| |
| piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); |
| pci64_dma_offset = 1ULL << mem_log; |
| |
| if (setup_inbound) { |
| /* Setup inbound memory window */ |
| out_be32(&pci->piw[win_idx].pitar, 0x00000000); |
| out_be32(&pci->piw[win_idx].piwbear, |
| pci64_dma_offset >> 44); |
| out_be32(&pci->piw[win_idx].piwbar, |
| pci64_dma_offset >> 12); |
| out_be32(&pci->piw[win_idx].piwar, piwar); |
| } |
| |
| /* |
| * install our own dma_set_mask handler to fixup dma_ops |
| * and dma_offset |
| */ |
| ppc_md.dma_set_mask = fsl_pci_dma_set_mask; |
| |
| pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn); |
| } |
| } else { |
| u64 paddr = 0; |
| |
| if (setup_inbound) { |
| /* Setup inbound memory window */ |
| out_be32(&pci->piw[win_idx].pitar, paddr >> 12); |
| out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); |
| out_be32(&pci->piw[win_idx].piwar, |
| (piwar | (mem_log - 1))); |
| } |
| |
| win_idx--; |
| paddr += 1ull << mem_log; |
| sz -= 1ull << mem_log; |
| |
| if (sz) { |
| mem_log = ilog2(sz); |
| piwar |= (mem_log - 1); |
| |
| if (setup_inbound) { |
| out_be32(&pci->piw[win_idx].pitar, |
| paddr >> 12); |
| out_be32(&pci->piw[win_idx].piwbar, |
| paddr >> 12); |
| out_be32(&pci->piw[win_idx].piwar, piwar); |
| } |
| |
| win_idx--; |
| paddr += 1ull << mem_log; |
| } |
| |
| hose->dma_window_base_cur = 0x00000000; |
| hose->dma_window_size = (resource_size_t)paddr; |
| } |
| |
| if (hose->dma_window_size < mem) { |
| #ifdef CONFIG_SWIOTLB |
| ppc_swiotlb_enable = 1; |
| #else |
| pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to " |
| "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", |
| hose->dn); |
| #endif |
| /* adjusting outbound windows could reclaim space in mem map */ |
| if (paddr_hi < 0xffffffffull) |
| pr_warn("%pOF: WARNING: Outbound window cfg leaves " |
| "gaps in memory map. Adjusting the memory map " |
| "could reduce unnecessary bounce buffering.\n", |
| hose->dn); |
| |
| pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn, |
| (u64)hose->dma_window_size); |
| } |
| } |
| |
| static void __init setup_pci_cmd(struct pci_controller *hose) |
| { |
| u16 cmd; |
| int cap_x; |
| |
| early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); |
| cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
| | PCI_COMMAND_IO; |
| early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); |
| |
| cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); |
| if (cap_x) { |
| int pci_x_cmd = cap_x + PCI_X_CMD; |
| cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
| | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; |
| early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); |
| } else { |
| early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); |
| } |
| } |
| |
| void fsl_pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| int i, is_pcie = 0, no_link; |
| |
| /* The root complex bridge comes up with bogus resources, |
| * we copy the PHB ones in. |
| * |
| * With the current generic PCI code, the PHB bus no longer |
| * has bus->resource[0..4] set, so things are a bit more |
| * tricky. |
| */ |
| |
| if (fsl_pcie_bus_fixup) |
| is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); |
| no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); |
| |
| if (bus->parent == hose->bus && (is_pcie || no_link)) { |
| for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { |
| struct resource *res = bus->resource[i]; |
| struct resource *par; |
| |
| if (!res) |
| continue; |
| if (i == 0) |
| par = &hose->io_resource; |
| else if (i < 4) |
| par = &hose->mem_resources[i-1]; |
| else par = NULL; |
| |
| res->start = par ? par->start : 0; |
| res->end = par ? par->end : 0; |
| res->flags = par ? par->flags : 0; |
| } |
| } |
| } |
| |
| int fsl_add_bridge(struct platform_device *pdev, int is_primary) |
| { |
| int len; |
| struct pci_controller *hose; |
| struct resource rsrc; |
| const int *bus_range; |
| u8 hdr_type, progif; |
| u32 class_code; |
| struct device_node *dev; |
| struct ccsr_pci __iomem *pci; |
| u16 temp; |
| u32 svr = mfspr(SPRN_SVR); |
| |
| dev = pdev->dev.of_node; |
| |
| if (!of_device_is_available(dev)) { |
| pr_warn("%pOF: disabled\n", dev); |
| return -ENODEV; |
| } |
| |
| pr_debug("Adding PCI host bridge %pOF\n", dev); |
| |
| /* Fetch host bridge registers address */ |
| if (of_address_to_resource(dev, 0, &rsrc)) { |
| printk(KERN_WARNING "Can't get pci register base!"); |
| return -ENOMEM; |
| } |
| |
| /* Get bus range if any */ |
| bus_range = of_get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) |
| printk(KERN_WARNING "Can't get bus-range for %pOF, assume" |
| " bus 0\n", dev); |
| |
| pci_add_flags(PCI_REASSIGN_ALL_BUS); |
| hose = pcibios_alloc_controller(dev); |
| if (!hose) |
| return -ENOMEM; |
| |
| /* set platform device as the parent */ |
| hose->parent = &pdev->dev; |
| hose->first_busno = bus_range ? bus_range[0] : 0x0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| |
| pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", |
| (u64)rsrc.start, (u64)resource_size(&rsrc)); |
| |
| pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc)); |
| if (!hose->private_data) |
| goto no_bridge; |
| |
| setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, |
| PPC_INDIRECT_TYPE_BIG_ENDIAN); |
| |
| if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) |
| hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; |
| |
| if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { |
| /* use fsl_indirect_read_config for PCIe */ |
| hose->ops = &fsl_indirect_pcie_ops; |
| /* For PCIE read HEADER_TYPE to identify controller mode */ |
| early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); |
| if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) |
| goto no_bridge; |
| |
| } else { |
| /* For PCI read PROG to identify controller mode */ |
| early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); |
| if ((progif & 1) && |
| !of_property_read_bool(dev, "fsl,pci-agent-force-enum")) |
| goto no_bridge; |
| } |
| |
| setup_pci_cmd(hose); |
| |
| /* check PCI express link status */ |
| if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { |
| hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | |
| PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; |
| if (fsl_pcie_check_link(hose)) |
| hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; |
| /* Fix Class Code to PCI_CLASS_BRIDGE_PCI_NORMAL for pre-3.0 controller */ |
| if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) { |
| early_read_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, &class_code); |
| class_code &= 0xff; |
| class_code |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8; |
| early_write_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, class_code); |
| } |
| } else { |
| /* |
| * Set PBFR(PCI Bus Function Register)[10] = 1 to |
| * disable the combining of crossing cacheline |
| * boundary requests into one burst transaction. |
| * PCI-X operation is not affected. |
| * Fix erratum PCI 5 on MPC8548 |
| */ |
| #define PCI_BUS_FUNCTION 0x44 |
| #define PCI_BUS_FUNCTION_MDS 0x400 /* Master disable streaming */ |
| if (((SVR_SOC_VER(svr) == SVR_8543) || |
| (SVR_SOC_VER(svr) == SVR_8545) || |
| (SVR_SOC_VER(svr) == SVR_8547) || |
| (SVR_SOC_VER(svr) == SVR_8548)) && |
| !early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX)) { |
| early_read_config_word(hose, 0, 0, |
| PCI_BUS_FUNCTION, &temp); |
| temp |= PCI_BUS_FUNCTION_MDS; |
| early_write_config_word(hose, 0, 0, |
| PCI_BUS_FUNCTION, temp); |
| } |
| } |
| |
| printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " |
| "Firmware bus number: %d->%d\n", |
| (unsigned long long)rsrc.start, hose->first_busno, |
| hose->last_busno); |
| |
| pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", |
| hose, hose->cfg_addr, hose->cfg_data); |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| pci_process_bridge_OF_ranges(hose, dev, is_primary); |
| |
| /* Setup PEX window registers */ |
| setup_pci_atmu(hose); |
| |
| /* Set up controller operations */ |
| setup_swiotlb_ops(hose); |
| |
| return 0; |
| |
| no_bridge: |
| iounmap(hose->private_data); |
| /* unmap cfg_data & cfg_addr separately if not on same page */ |
| if (((unsigned long)hose->cfg_data & PAGE_MASK) != |
| ((unsigned long)hose->cfg_addr & PAGE_MASK)) |
| iounmap(hose->cfg_data); |
| iounmap(hose->cfg_addr); |
| pcibios_free_controller(hose); |
| return -ENODEV; |
| } |
| #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ |
| |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, |
| quirk_fsl_pcie_early); |
| |
| #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) |
| struct mpc83xx_pcie_priv { |
| void __iomem *cfg_type0; |
| void __iomem *cfg_type1; |
| u32 dev_base; |
| }; |
| |
| struct pex_inbound_window { |
| u32 ar; |
| u32 tar; |
| u32 barl; |
| u32 barh; |
| }; |
| |
| /* |
| * With the convention of u-boot, the PCIE outbound window 0 serves |
| * as configuration transactions outbound. |
| */ |
| #define PEX_OUTWIN0_BAR 0xCA4 |
| #define PEX_OUTWIN0_TAL 0xCA8 |
| #define PEX_OUTWIN0_TAH 0xCAC |
| #define PEX_RC_INWIN_BASE 0xE60 |
| #define PEX_RCIWARn_EN 0x1 |
| |
| static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Workaround for the HW bug: for Type 0 configure transactions the |
| * PCI-E controller does not check the device number bits and just |
| * assumes that the device number bits are 0. |
| */ |
| if (bus->number == hose->first_busno || |
| bus->primary == hose->first_busno) { |
| if (devfn & 0xf8) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (ppc_md.pci_exclude_device) { |
| if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, |
| unsigned int devfn, int offset) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| struct mpc83xx_pcie_priv *pcie = hose->dn->data; |
| u32 dev_base = bus->number << 24 | devfn << 16; |
| int ret; |
| |
| ret = mpc83xx_pcie_exclude_device(bus, devfn); |
| if (ret) |
| return NULL; |
| |
| offset &= 0xfff; |
| |
| /* Type 0 */ |
| if (bus->number == hose->first_busno) |
| return pcie->cfg_type0 + offset; |
| |
| if (pcie->dev_base == dev_base) |
| goto mapped; |
| |
| out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); |
| |
| pcie->dev_base = dev_base; |
| mapped: |
| return pcie->cfg_type1 + offset; |
| } |
| |
| static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bus); |
| |
| /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ |
| if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) |
| val &= 0xffffff00; |
| |
| return pci_generic_config_write(bus, devfn, offset, len, val); |
| } |
| |
| static struct pci_ops mpc83xx_pcie_ops = { |
| .map_bus = mpc83xx_pcie_remap_cfg, |
| .read = pci_generic_config_read, |
| .write = mpc83xx_pcie_write_config, |
| }; |
| |
| static int __init mpc83xx_pcie_setup(struct pci_controller *hose, |
| struct resource *reg) |
| { |
| struct mpc83xx_pcie_priv *pcie; |
| u32 cfg_bar; |
| int ret = -ENOMEM; |
| |
| pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); |
| if (!pcie) |
| return ret; |
| |
| pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); |
| if (!pcie->cfg_type0) |
| goto err0; |
| |
| cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); |
| if (!cfg_bar) { |
| /* PCI-E isn't configured. */ |
| ret = -ENODEV; |
| goto err1; |
| } |
| |
| pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); |
| if (!pcie->cfg_type1) |
| goto err1; |
| |
| WARN_ON(hose->dn->data); |
| hose->dn->data = pcie; |
| hose->ops = &mpc83xx_pcie_ops; |
| hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; |
| |
| out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); |
| out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); |
| |
| if (fsl_pcie_check_link(hose)) |
| hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; |
| |
| return 0; |
| err1: |
| iounmap(pcie->cfg_type0); |
| err0: |
| kfree(pcie); |
| return ret; |
| |
| } |
| |
| int __init mpc83xx_add_bridge(struct device_node *dev) |
| { |
| int ret; |
| int len; |
| struct pci_controller *hose; |
| struct resource rsrc_reg; |
| struct resource rsrc_cfg; |
| const int *bus_range; |
| int primary; |
| |
| is_mpc83xx_pci = 1; |
| |
| if (!of_device_is_available(dev)) { |
| pr_warn("%pOF: disabled by the firmware.\n", |
| dev); |
| return -ENODEV; |
| } |
| pr_debug("Adding PCI host bridge %pOF\n", dev); |
| |
| /* Fetch host bridge registers address */ |
| if (of_address_to_resource(dev, 0, &rsrc_reg)) { |
| printk(KERN_WARNING "Can't get pci register base!\n"); |
| return -ENOMEM; |
| } |
| |
| memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); |
| |
| if (of_address_to_resource(dev, 1, &rsrc_cfg)) { |
| printk(KERN_WARNING |
| "No pci config register base in dev tree, " |
| "using default\n"); |
| /* |
| * MPC83xx supports up to two host controllers |
| * one at 0x8500 has config space registers at 0x8300 |
| * one at 0x8600 has config space registers at 0x8380 |
| */ |
| if ((rsrc_reg.start & 0xfffff) == 0x8500) |
| rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; |
| else if ((rsrc_reg.start & 0xfffff) == 0x8600) |
| rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; |
| } |
| /* |
| * Controller at offset 0x8500 is primary |
| */ |
| if ((rsrc_reg.start & 0xfffff) == 0x8500) |
| primary = 1; |
| else |
| primary = 0; |
| |
| /* Get bus range if any */ |
| bus_range = of_get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %pOF, assume" |
| " bus 0\n", dev); |
| } |
| |
| pci_add_flags(PCI_REASSIGN_ALL_BUS); |
| hose = pcibios_alloc_controller(dev); |
| if (!hose) |
| return -ENOMEM; |
| |
| hose->first_busno = bus_range ? bus_range[0] : 0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| |
| if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { |
| ret = mpc83xx_pcie_setup(hose, &rsrc_reg); |
| if (ret) |
| goto err0; |
| } else { |
| setup_indirect_pci(hose, rsrc_cfg.start, |
| rsrc_cfg.start + 4, 0); |
| } |
| |
| printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " |
| "Firmware bus number: %d->%d\n", |
| (unsigned long long)rsrc_reg.start, hose->first_busno, |
| hose->last_busno); |
| |
| pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", |
| hose, hose->cfg_addr, hose->cfg_data); |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| pci_process_bridge_OF_ranges(hose, dev, primary); |
| |
| return 0; |
| err0: |
| pcibios_free_controller(hose); |
| return ret; |
| } |
| #endif /* CONFIG_PPC_83xx */ |
| |
| u64 fsl_pci_immrbar_base(struct pci_controller *hose) |
| { |
| #ifdef CONFIG_PPC_83xx |
| if (is_mpc83xx_pci) { |
| struct mpc83xx_pcie_priv *pcie = hose->dn->data; |
| struct pex_inbound_window *in; |
| int i; |
| |
| /* Walk the Root Complex Inbound windows to match IMMR base */ |
| in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; |
| for (i = 0; i < 4; i++) { |
| /* not enabled, skip */ |
| if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN)) |
| continue; |
| |
| if (get_immrbase() == in_le32(&in[i].tar)) |
| return (u64)in_le32(&in[i].barh) << 32 | |
| in_le32(&in[i].barl); |
| } |
| |
| printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); |
| } |
| #endif |
| |
| #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) |
| if (!is_mpc83xx_pci) { |
| u32 base; |
| |
| pci_bus_read_config_dword(hose->bus, |
| PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); |
| |
| /* |
| * For PEXCSRBAR, bit 3-0 indicate prefetchable and |
| * address type. So when getting base address, these |
| * bits should be masked |
| */ |
| base &= PCI_BASE_ADDRESS_MEM_MASK; |
| |
| return base; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_E500 |
| static int mcheck_handle_load(struct pt_regs *regs, u32 inst) |
| { |
| unsigned int rd, ra, rb, d; |
| |
| rd = get_rt(inst); |
| ra = get_ra(inst); |
| rb = get_rb(inst); |
| d = get_d(inst); |
| |
| switch (get_op(inst)) { |
| case 31: |
| switch (get_xop(inst)) { |
| case OP_31_XOP_LWZX: |
| case OP_31_XOP_LWBRX: |
| regs->gpr[rd] = 0xffffffff; |
| break; |
| |
| case OP_31_XOP_LWZUX: |
| regs->gpr[rd] = 0xffffffff; |
| regs->gpr[ra] += regs->gpr[rb]; |
| break; |
| |
| case OP_31_XOP_LBZX: |
| regs->gpr[rd] = 0xff; |
| break; |
| |
| case OP_31_XOP_LBZUX: |
| regs->gpr[rd] = 0xff; |
| regs->gpr[ra] += regs->gpr[rb]; |
| break; |
| |
| case OP_31_XOP_LHZX: |
| case OP_31_XOP_LHBRX: |
| regs->gpr[rd] = 0xffff; |
| break; |
| |
| case OP_31_XOP_LHZUX: |
| regs->gpr[rd] = 0xffff; |
| regs->gpr[ra] += regs->gpr[rb]; |
| break; |
| |
| case OP_31_XOP_LHAX: |
| regs->gpr[rd] = ~0UL; |
| break; |
| |
| case OP_31_XOP_LHAUX: |
| regs->gpr[rd] = ~0UL; |
| regs->gpr[ra] += regs->gpr[rb]; |
| break; |
| |
| default: |
| return 0; |
| } |
| break; |
| |
| case OP_LWZ: |
| regs->gpr[rd] = 0xffffffff; |
| break; |
| |
| case OP_LWZU: |
| regs->gpr[rd] = 0xffffffff; |
| regs->gpr[ra] += (s16)d; |
| break; |
| |
| case OP_LBZ: |
| regs->gpr[rd] = 0xff; |
| break; |
| |
| case OP_LBZU: |
| regs->gpr[rd] = 0xff; |
| regs->gpr[ra] += (s16)d; |
| break; |
| |
| case OP_LHZ: |
| regs->gpr[rd] = 0xffff; |
| break; |
| |
| case OP_LHZU: |
| regs->gpr[rd] = 0xffff; |
| regs->gpr[ra] += (s16)d; |
| break; |
| |
| case OP_LHA: |
| regs->gpr[rd] = ~0UL; |
| break; |
| |
| case OP_LHAU: |
| regs->gpr[rd] = ~0UL; |
| regs->gpr[ra] += (s16)d; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int is_in_pci_mem_space(phys_addr_t addr) |
| { |
| struct pci_controller *hose; |
| struct resource *res; |
| int i; |
| |
| list_for_each_entry(hose, &hose_list, list_node) { |
| if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)) |
| continue; |
| |
| for (i = 0; i < 3; i++) { |
| res = &hose->mem_resources[i]; |
| if ((res->flags & IORESOURCE_MEM) && |
| addr >= res->start && addr <= res->end) |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| int fsl_pci_mcheck_exception(struct pt_regs *regs) |
| { |
| u32 inst; |
| int ret; |
| phys_addr_t addr = 0; |
| |
| /* Let KVM/QEMU deal with the exception */ |
| if (regs->msr & MSR_GS) |
| return 0; |
| |
| #ifdef CONFIG_PHYS_64BIT |
| addr = mfspr(SPRN_MCARU); |
| addr <<= 32; |
| #endif |
| addr += mfspr(SPRN_MCAR); |
| |
| if (is_in_pci_mem_space(addr)) { |
| if (user_mode(regs)) { |
| pagefault_disable(); |
| ret = get_user(inst, (__u32 __user *)regs->nip); |
| pagefault_enable(); |
| } else { |
| ret = probe_kernel_address((void *)regs->nip, inst); |
| } |
| |
| if (!ret && mcheck_handle_load(regs, inst)) { |
| regs->nip += 4; |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) |
| static const struct of_device_id pci_ids[] = { |
| { .compatible = "fsl,mpc8540-pci", }, |
| { .compatible = "fsl,mpc8548-pcie", }, |
| { .compatible = "fsl,mpc8610-pci", }, |
| { .compatible = "fsl,mpc8641-pcie", }, |
| { .compatible = "fsl,qoriq-pcie", }, |
| { .compatible = "fsl,qoriq-pcie-v2.1", }, |
| { .compatible = "fsl,qoriq-pcie-v2.2", }, |
| { .compatible = "fsl,qoriq-pcie-v2.3", }, |
| { .compatible = "fsl,qoriq-pcie-v2.4", }, |
| { .compatible = "fsl,qoriq-pcie-v3.0", }, |
| |
| /* |
| * The following entries are for compatibility with older device |
| * trees. |
| */ |
| { .compatible = "fsl,p1022-pcie", }, |
| { .compatible = "fsl,p4080-pcie", }, |
| |
| {}, |
| }; |
| |
| struct device_node *fsl_pci_primary; |
| |
| void fsl_pci_assign_primary(void) |
| { |
| struct device_node *np; |
| |
| /* Callers can specify the primary bus using other means. */ |
| if (fsl_pci_primary) |
| return; |
| |
| /* If a PCI host bridge contains an ISA node, it's primary. */ |
| np = of_find_node_by_type(NULL, "isa"); |
| while ((fsl_pci_primary = of_get_parent(np))) { |
| of_node_put(np); |
| np = fsl_pci_primary; |
| |
| if (of_match_node(pci_ids, np) && of_device_is_available(np)) |
| return; |
| } |
| |
| /* |
| * If there's no PCI host bridge with ISA, arbitrarily |
| * designate one as primary. This can go away once |
| * various bugs with primary-less systems are fixed. |
| */ |
| for_each_matching_node(np, pci_ids) { |
| if (of_device_is_available(np)) { |
| fsl_pci_primary = np; |
| of_node_put(np); |
| return; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id) |
| { |
| struct pci_controller *hose = dev_id; |
| struct ccsr_pci __iomem *pci = hose->private_data; |
| u32 dr; |
| |
| dr = in_be32(&pci->pex_pme_mes_dr); |
| if (!dr) |
| return IRQ_NONE; |
| |
| out_be32(&pci->pex_pme_mes_dr, dr); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int fsl_pci_pme_probe(struct pci_controller *hose) |
| { |
| struct ccsr_pci __iomem *pci; |
| struct pci_dev *dev; |
| int pme_irq; |
| int res; |
| u16 pms; |
| |
| /* Get hose's pci_dev */ |
| dev = list_first_entry(&hose->bus->devices, typeof(*dev), bus_list); |
| |
| /* PME Disable */ |
| pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); |
| pms &= ~PCI_PM_CTRL_PME_ENABLE; |
| pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); |
| |
| pme_irq = irq_of_parse_and_map(hose->dn, 0); |
| if (!pme_irq) { |
| dev_err(&dev->dev, "Failed to map PME interrupt.\n"); |
| |
| return -ENXIO; |
| } |
| |
| res = devm_request_irq(hose->parent, pme_irq, |
| fsl_pci_pme_handle, |
| IRQF_SHARED, |
| "[PCI] PME", hose); |
| if (res < 0) { |
| dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq); |
| irq_dispose_mapping(pme_irq); |
| |
| return -ENODEV; |
| } |
| |
| pci = hose->private_data; |
| |
| /* Enable PTOD, ENL23D & EXL23D */ |
| clrbits32(&pci->pex_pme_mes_disr, |
| PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); |
| |
| out_be32(&pci->pex_pme_mes_ier, 0); |
| setbits32(&pci->pex_pme_mes_ier, |
| PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); |
| |
| /* PME Enable */ |
| pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); |
| pms |= PCI_PM_CTRL_PME_ENABLE; |
| pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); |
| |
| return 0; |
| } |
| |
| static void send_pme_turnoff_message(struct pci_controller *hose) |
| { |
| struct ccsr_pci __iomem *pci = hose->private_data; |
| u32 dr; |
| int i; |
| |
| /* Send PME_Turn_Off Message Request */ |
| setbits32(&pci->pex_pmcr, PEX_PMCR_PTOMR); |
| |
| /* Wait trun off done */ |
| for (i = 0; i < 150; i++) { |
| dr = in_be32(&pci->pex_pme_mes_dr); |
| if (dr) { |
| out_be32(&pci->pex_pme_mes_dr, dr); |
| break; |
| } |
| |
| udelay(1000); |
| } |
| } |
| |
| static void fsl_pci_syscore_do_suspend(struct pci_controller *hose) |
| { |
| send_pme_turnoff_message(hose); |
| } |
| |
| static int fsl_pci_syscore_suspend(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) |
| fsl_pci_syscore_do_suspend(hose); |
| |
| return 0; |
| } |
| |
| static void fsl_pci_syscore_do_resume(struct pci_controller *hose) |
| { |
| struct ccsr_pci __iomem *pci = hose->private_data; |
| u32 dr; |
| int i; |
| |
| /* Send Exit L2 State Message */ |
| setbits32(&pci->pex_pmcr, PEX_PMCR_EXL2S); |
| |
| /* Wait exit done */ |
| for (i = 0; i < 150; i++) { |
| dr = in_be32(&pci->pex_pme_mes_dr); |
| if (dr) { |
| out_be32(&pci->pex_pme_mes_dr, dr); |
| break; |
| } |
| |
| udelay(1000); |
| } |
| |
| setup_pci_atmu(hose); |
| } |
| |
| static void fsl_pci_syscore_resume(void) |
| { |
| struct pci_controller *hose, *tmp; |
| |
| list_for_each_entry_safe(hose, tmp, &hose_list, list_node) |
| fsl_pci_syscore_do_resume(hose); |
| } |
| |
| static struct syscore_ops pci_syscore_pm_ops = { |
| .suspend = fsl_pci_syscore_suspend, |
| .resume = fsl_pci_syscore_resume, |
| }; |
| #endif |
| |
| void fsl_pcibios_fixup_phb(struct pci_controller *phb) |
| { |
| #ifdef CONFIG_PM_SLEEP |
| fsl_pci_pme_probe(phb); |
| #endif |
| } |
| |
| static int add_err_dev(struct platform_device *pdev) |
| { |
| struct platform_device *errdev; |
| struct mpc85xx_edac_pci_plat_data pd = { |
| .of_node = pdev->dev.of_node |
| }; |
| |
| errdev = platform_device_register_resndata(&pdev->dev, |
| "mpc85xx-pci-edac", |
| PLATFORM_DEVID_AUTO, |
| pdev->resource, |
| pdev->num_resources, |
| &pd, sizeof(pd)); |
| |
| return PTR_ERR_OR_ZERO(errdev); |
| } |
| |
| static int fsl_pci_probe(struct platform_device *pdev) |
| { |
| struct device_node *node; |
| int ret; |
| |
| node = pdev->dev.of_node; |
| ret = fsl_add_bridge(pdev, fsl_pci_primary == node); |
| if (ret) |
| return ret; |
| |
| ret = add_err_dev(pdev); |
| if (ret) |
| dev_err(&pdev->dev, "couldn't register error device: %d\n", |
| ret); |
| |
| return 0; |
| } |
| |
| static struct platform_driver fsl_pci_driver = { |
| .driver = { |
| .name = "fsl-pci", |
| .of_match_table = pci_ids, |
| }, |
| .probe = fsl_pci_probe, |
| }; |
| |
| static int __init fsl_pci_init(void) |
| { |
| #ifdef CONFIG_PM_SLEEP |
| register_syscore_ops(&pci_syscore_pm_ops); |
| #endif |
| return platform_driver_register(&fsl_pci_driver); |
| } |
| arch_initcall(fsl_pci_init); |
| #endif |