| /* | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Cross Partition Communication (XPC) support - standard version. | 
 |  * | 
 |  *	XPC provides a message passing capability that crosses partition | 
 |  *	boundaries. This module is made up of two parts: | 
 |  * | 
 |  *	    partition	This part detects the presence/absence of other | 
 |  *			partitions. It provides a heartbeat and monitors | 
 |  *			the heartbeats of other partitions. | 
 |  * | 
 |  *	    channel	This part manages the channels and sends/receives | 
 |  *			messages across them to/from other partitions. | 
 |  * | 
 |  *	There are a couple of additional functions residing in XP, which | 
 |  *	provide an interface to XPC for its users. | 
 |  * | 
 |  * | 
 |  *	Caveats: | 
 |  * | 
 |  *	  . Currently on sn2, we have no way to determine which nasid an IRQ | 
 |  *	    came from. Thus, xpc_send_IRQ_sn2() does a remote amo write | 
 |  *	    followed by an IPI. The amo indicates where data is to be pulled | 
 |  *	    from, so after the IPI arrives, the remote partition checks the amo | 
 |  *	    word. The IPI can actually arrive before the amo however, so other | 
 |  *	    code must periodically check for this case. Also, remote amo | 
 |  *	    operations do not reliably time out. Thus we do a remote PIO read | 
 |  *	    solely to know whether the remote partition is down and whether we | 
 |  *	    should stop sending IPIs to it. This remote PIO read operation is | 
 |  *	    set up in a special nofault region so SAL knows to ignore (and | 
 |  *	    cleanup) any errors due to the remote amo write, PIO read, and/or | 
 |  *	    PIO write operations. | 
 |  * | 
 |  *	    If/when new hardware solves this IPI problem, we should abandon | 
 |  *	    the current approach. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/sysctl.h> | 
 | #include <linux/device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/kdebug.h> | 
 | #include <linux/kthread.h> | 
 | #include "xpc.h" | 
 |  | 
 | /* define two XPC debug device structures to be used with dev_dbg() et al */ | 
 |  | 
 | struct device_driver xpc_dbg_name = { | 
 | 	.name = "xpc" | 
 | }; | 
 |  | 
 | struct device xpc_part_dbg_subname = { | 
 | 	.init_name = "",	/* set to "part" at xpc_init() time */ | 
 | 	.driver = &xpc_dbg_name | 
 | }; | 
 |  | 
 | struct device xpc_chan_dbg_subname = { | 
 | 	.init_name = "",	/* set to "chan" at xpc_init() time */ | 
 | 	.driver = &xpc_dbg_name | 
 | }; | 
 |  | 
 | struct device *xpc_part = &xpc_part_dbg_subname; | 
 | struct device *xpc_chan = &xpc_chan_dbg_subname; | 
 |  | 
 | static int xpc_kdebug_ignore; | 
 |  | 
 | /* systune related variables for /proc/sys directories */ | 
 |  | 
 | static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; | 
 | static int xpc_hb_min_interval = 1; | 
 | static int xpc_hb_max_interval = 10; | 
 |  | 
 | static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; | 
 | static int xpc_hb_check_min_interval = 10; | 
 | static int xpc_hb_check_max_interval = 120; | 
 |  | 
 | int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT; | 
 | static int xpc_disengage_min_timelimit;	/* = 0 */ | 
 | static int xpc_disengage_max_timelimit = 120; | 
 |  | 
 | static ctl_table xpc_sys_xpc_hb_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb_interval", | 
 | 	 .data = &xpc_hb_interval, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_hb_min_interval, | 
 | 	 .extra2 = &xpc_hb_max_interval}, | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb_check_interval", | 
 | 	 .data = &xpc_hb_check_interval, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_hb_check_min_interval, | 
 | 	 .extra2 = &xpc_hb_check_max_interval}, | 
 | 	{} | 
 | }; | 
 | static ctl_table xpc_sys_xpc_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb", | 
 | 	 .mode = 0555, | 
 | 	 .child = xpc_sys_xpc_hb_dir}, | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "disengage_timelimit", | 
 | 	 .data = &xpc_disengage_timelimit, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_disengage_min_timelimit, | 
 | 	 .extra2 = &xpc_disengage_max_timelimit}, | 
 | 	{} | 
 | }; | 
 | static ctl_table xpc_sys_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "xpc", | 
 | 	 .mode = 0555, | 
 | 	 .child = xpc_sys_xpc_dir}, | 
 | 	{} | 
 | }; | 
 | static struct ctl_table_header *xpc_sysctl; | 
 |  | 
 | /* non-zero if any remote partition disengage was timed out */ | 
 | int xpc_disengage_timedout; | 
 |  | 
 | /* #of activate IRQs received and not yet processed */ | 
 | int xpc_activate_IRQ_rcvd; | 
 | DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock); | 
 |  | 
 | /* IRQ handler notifies this wait queue on receipt of an IRQ */ | 
 | DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq); | 
 |  | 
 | static unsigned long xpc_hb_check_timeout; | 
 | static struct timer_list xpc_hb_timer; | 
 | void *xpc_heartbeating_to_mask; | 
 |  | 
 | /* notification that the xpc_hb_checker thread has exited */ | 
 | static DECLARE_COMPLETION(xpc_hb_checker_exited); | 
 |  | 
 | /* notification that the xpc_discovery thread has exited */ | 
 | static DECLARE_COMPLETION(xpc_discovery_exited); | 
 |  | 
 | static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); | 
 |  | 
 | static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); | 
 | static struct notifier_block xpc_reboot_notifier = { | 
 | 	.notifier_call = xpc_system_reboot, | 
 | }; | 
 |  | 
 | static int xpc_system_die(struct notifier_block *, unsigned long, void *); | 
 | static struct notifier_block xpc_die_notifier = { | 
 | 	.notifier_call = xpc_system_die, | 
 | }; | 
 |  | 
 | int (*xpc_setup_partitions_sn) (void); | 
 | enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, | 
 | 						  unsigned long *rp_pa, | 
 | 						  size_t *len); | 
 | int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp); | 
 | void (*xpc_heartbeat_init) (void); | 
 | void (*xpc_heartbeat_exit) (void); | 
 | void (*xpc_increment_heartbeat) (void); | 
 | void (*xpc_offline_heartbeat) (void); | 
 | void (*xpc_online_heartbeat) (void); | 
 | enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part); | 
 |  | 
 | enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); | 
 | void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); | 
 | u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); | 
 | enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch); | 
 | void (*xpc_teardown_msg_structures) (struct xpc_channel *ch); | 
 | void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); | 
 | int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch); | 
 | void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch); | 
 |  | 
 | void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, | 
 | 					  unsigned long remote_rp_pa, | 
 | 					  int nasid); | 
 | void (*xpc_request_partition_reactivation) (struct xpc_partition *part); | 
 | void (*xpc_request_partition_deactivation) (struct xpc_partition *part); | 
 | void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); | 
 |  | 
 | void (*xpc_process_activate_IRQ_rcvd) (void); | 
 | enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part); | 
 | void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part); | 
 |  | 
 | void (*xpc_indicate_partition_engaged) (struct xpc_partition *part); | 
 | int (*xpc_partition_engaged) (short partid); | 
 | int (*xpc_any_partition_engaged) (void); | 
 | void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part); | 
 | void (*xpc_assume_partition_disengaged) (short partid); | 
 |  | 
 | void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch, | 
 | 				     unsigned long *irq_flags); | 
 | void (*xpc_send_chctl_closereply) (struct xpc_channel *ch, | 
 | 				   unsigned long *irq_flags); | 
 | void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, | 
 | 				    unsigned long *irq_flags); | 
 | void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, | 
 | 				  unsigned long *irq_flags); | 
 |  | 
 | void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, | 
 | 				     unsigned long msgqueue_pa); | 
 |  | 
 | enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags, | 
 | 				    void *payload, u16 payload_size, | 
 | 				    u8 notify_type, xpc_notify_func func, | 
 | 				    void *key); | 
 | void (*xpc_received_payload) (struct xpc_channel *ch, void *payload); | 
 |  | 
 | /* | 
 |  * Timer function to enforce the timelimit on the partition disengage. | 
 |  */ | 
 | static void | 
 | xpc_timeout_partition_disengage(unsigned long data) | 
 | { | 
 | 	struct xpc_partition *part = (struct xpc_partition *)data; | 
 |  | 
 | 	DBUG_ON(time_is_after_jiffies(part->disengage_timeout)); | 
 |  | 
 | 	(void)xpc_partition_disengaged(part); | 
 |  | 
 | 	DBUG_ON(part->disengage_timeout != 0); | 
 | 	DBUG_ON(xpc_partition_engaged(XPC_PARTID(part))); | 
 | } | 
 |  | 
 | /* | 
 |  * Timer to produce the heartbeat.  The timer structures function is | 
 |  * already set when this is initially called.  A tunable is used to | 
 |  * specify when the next timeout should occur. | 
 |  */ | 
 | static void | 
 | xpc_hb_beater(unsigned long dummy) | 
 | { | 
 | 	xpc_increment_heartbeat(); | 
 |  | 
 | 	if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) | 
 | 		wake_up_interruptible(&xpc_activate_IRQ_wq); | 
 |  | 
 | 	xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); | 
 | 	add_timer(&xpc_hb_timer); | 
 | } | 
 |  | 
 | static void | 
 | xpc_start_hb_beater(void) | 
 | { | 
 | 	xpc_heartbeat_init(); | 
 | 	init_timer(&xpc_hb_timer); | 
 | 	xpc_hb_timer.function = xpc_hb_beater; | 
 | 	xpc_hb_beater(0); | 
 | } | 
 |  | 
 | static void | 
 | xpc_stop_hb_beater(void) | 
 | { | 
 | 	del_timer_sync(&xpc_hb_timer); | 
 | 	xpc_heartbeat_exit(); | 
 | } | 
 |  | 
 | /* | 
 |  * At periodic intervals, scan through all active partitions and ensure | 
 |  * their heartbeat is still active.  If not, the partition is deactivated. | 
 |  */ | 
 | static void | 
 | xpc_check_remote_hb(void) | 
 | { | 
 | 	struct xpc_partition *part; | 
 | 	short partid; | 
 | 	enum xp_retval ret; | 
 |  | 
 | 	for (partid = 0; partid < xp_max_npartitions; partid++) { | 
 |  | 
 | 		if (xpc_exiting) | 
 | 			break; | 
 |  | 
 | 		if (partid == xp_partition_id) | 
 | 			continue; | 
 |  | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		if (part->act_state == XPC_P_AS_INACTIVE || | 
 | 		    part->act_state == XPC_P_AS_DEACTIVATING) { | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		ret = xpc_get_remote_heartbeat(part); | 
 | 		if (ret != xpSuccess) | 
 | 			XPC_DEACTIVATE_PARTITION(part, ret); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * This thread is responsible for nearly all of the partition | 
 |  * activation/deactivation. | 
 |  */ | 
 | static int | 
 | xpc_hb_checker(void *ignore) | 
 | { | 
 | 	int force_IRQ = 0; | 
 |  | 
 | 	/* this thread was marked active by xpc_hb_init() */ | 
 |  | 
 | 	set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU)); | 
 |  | 
 | 	/* set our heartbeating to other partitions into motion */ | 
 | 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); | 
 | 	xpc_start_hb_beater(); | 
 |  | 
 | 	while (!xpc_exiting) { | 
 |  | 
 | 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " | 
 | 			"been received\n", | 
 | 			(int)(xpc_hb_check_timeout - jiffies), | 
 | 			xpc_activate_IRQ_rcvd); | 
 |  | 
 | 		/* checking of remote heartbeats is skewed by IRQ handling */ | 
 | 		if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) { | 
 | 			xpc_hb_check_timeout = jiffies + | 
 | 			    (xpc_hb_check_interval * HZ); | 
 |  | 
 | 			dev_dbg(xpc_part, "checking remote heartbeats\n"); | 
 | 			xpc_check_remote_hb(); | 
 |  | 
 | 			/* | 
 | 			 * On sn2 we need to periodically recheck to ensure no | 
 | 			 * IRQ/amo pairs have been missed. | 
 | 			 */ | 
 | 			if (is_shub()) | 
 | 				force_IRQ = 1; | 
 | 		} | 
 |  | 
 | 		/* check for outstanding IRQs */ | 
 | 		if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) { | 
 | 			force_IRQ = 0; | 
 | 			dev_dbg(xpc_part, "processing activate IRQs " | 
 | 				"received\n"); | 
 | 			xpc_process_activate_IRQ_rcvd(); | 
 | 		} | 
 |  | 
 | 		/* wait for IRQ or timeout */ | 
 | 		(void)wait_event_interruptible(xpc_activate_IRQ_wq, | 
 | 					       (time_is_before_eq_jiffies( | 
 | 						xpc_hb_check_timeout) || | 
 | 						xpc_activate_IRQ_rcvd > 0 || | 
 | 						xpc_exiting)); | 
 | 	} | 
 |  | 
 | 	xpc_stop_hb_beater(); | 
 |  | 
 | 	dev_dbg(xpc_part, "heartbeat checker is exiting\n"); | 
 |  | 
 | 	/* mark this thread as having exited */ | 
 | 	complete(&xpc_hb_checker_exited); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This thread will attempt to discover other partitions to activate | 
 |  * based on info provided by SAL. This new thread is short lived and | 
 |  * will exit once discovery is complete. | 
 |  */ | 
 | static int | 
 | xpc_initiate_discovery(void *ignore) | 
 | { | 
 | 	xpc_discovery(); | 
 |  | 
 | 	dev_dbg(xpc_part, "discovery thread is exiting\n"); | 
 |  | 
 | 	/* mark this thread as having exited */ | 
 | 	complete(&xpc_discovery_exited); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * The first kthread assigned to a newly activated partition is the one | 
 |  * created by XPC HB with which it calls xpc_activating(). XPC hangs on to | 
 |  * that kthread until the partition is brought down, at which time that kthread | 
 |  * returns back to XPC HB. (The return of that kthread will signify to XPC HB | 
 |  * that XPC has dismantled all communication infrastructure for the associated | 
 |  * partition.) This kthread becomes the channel manager for that partition. | 
 |  * | 
 |  * Each active partition has a channel manager, who, besides connecting and | 
 |  * disconnecting channels, will ensure that each of the partition's connected | 
 |  * channels has the required number of assigned kthreads to get the work done. | 
 |  */ | 
 | static void | 
 | xpc_channel_mgr(struct xpc_partition *part) | 
 | { | 
 | 	while (part->act_state != XPC_P_AS_DEACTIVATING || | 
 | 	       atomic_read(&part->nchannels_active) > 0 || | 
 | 	       !xpc_partition_disengaged(part)) { | 
 |  | 
 | 		xpc_process_sent_chctl_flags(part); | 
 |  | 
 | 		/* | 
 | 		 * Wait until we've been requested to activate kthreads or | 
 | 		 * all of the channel's message queues have been torn down or | 
 | 		 * a signal is pending. | 
 | 		 * | 
 | 		 * The channel_mgr_requests is set to 1 after being awakened, | 
 | 		 * This is done to prevent the channel mgr from making one pass | 
 | 		 * through the loop for each request, since he will | 
 | 		 * be servicing all the requests in one pass. The reason it's | 
 | 		 * set to 1 instead of 0 is so that other kthreads will know | 
 | 		 * that the channel mgr is running and won't bother trying to | 
 | 		 * wake him up. | 
 | 		 */ | 
 | 		atomic_dec(&part->channel_mgr_requests); | 
 | 		(void)wait_event_interruptible(part->channel_mgr_wq, | 
 | 				(atomic_read(&part->channel_mgr_requests) > 0 || | 
 | 				 part->chctl.all_flags != 0 || | 
 | 				 (part->act_state == XPC_P_AS_DEACTIVATING && | 
 | 				 atomic_read(&part->nchannels_active) == 0 && | 
 | 				 xpc_partition_disengaged(part)))); | 
 | 		atomic_set(&part->channel_mgr_requests, 1); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Guarantee that the kzalloc'd memory is cacheline aligned. | 
 |  */ | 
 | void * | 
 | xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) | 
 | { | 
 | 	/* see if kzalloc will give us cachline aligned memory by default */ | 
 | 	*base = kzalloc(size, flags); | 
 | 	if (*base == NULL) | 
 | 		return NULL; | 
 |  | 
 | 	if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) | 
 | 		return *base; | 
 |  | 
 | 	kfree(*base); | 
 |  | 
 | 	/* nope, we'll have to do it ourselves */ | 
 | 	*base = kzalloc(size + L1_CACHE_BYTES, flags); | 
 | 	if (*base == NULL) | 
 | 		return NULL; | 
 |  | 
 | 	return (void *)L1_CACHE_ALIGN((u64)*base); | 
 | } | 
 |  | 
 | /* | 
 |  * Setup the channel structures necessary to support XPartition Communication | 
 |  * between the specified remote partition and the local one. | 
 |  */ | 
 | static enum xp_retval | 
 | xpc_setup_ch_structures(struct xpc_partition *part) | 
 | { | 
 | 	enum xp_retval ret; | 
 | 	int ch_number; | 
 | 	struct xpc_channel *ch; | 
 | 	short partid = XPC_PARTID(part); | 
 |  | 
 | 	/* | 
 | 	 * Allocate all of the channel structures as a contiguous chunk of | 
 | 	 * memory. | 
 | 	 */ | 
 | 	DBUG_ON(part->channels != NULL); | 
 | 	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, | 
 | 				 GFP_KERNEL); | 
 | 	if (part->channels == NULL) { | 
 | 		dev_err(xpc_chan, "can't get memory for channels\n"); | 
 | 		return xpNoMemory; | 
 | 	} | 
 |  | 
 | 	/* allocate the remote open and close args */ | 
 |  | 
 | 	part->remote_openclose_args = | 
 | 	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, | 
 | 					  GFP_KERNEL, &part-> | 
 | 					  remote_openclose_args_base); | 
 | 	if (part->remote_openclose_args == NULL) { | 
 | 		dev_err(xpc_chan, "can't get memory for remote connect args\n"); | 
 | 		ret = xpNoMemory; | 
 | 		goto out_1; | 
 | 	} | 
 |  | 
 | 	part->chctl.all_flags = 0; | 
 | 	spin_lock_init(&part->chctl_lock); | 
 |  | 
 | 	atomic_set(&part->channel_mgr_requests, 1); | 
 | 	init_waitqueue_head(&part->channel_mgr_wq); | 
 |  | 
 | 	part->nchannels = XPC_MAX_NCHANNELS; | 
 |  | 
 | 	atomic_set(&part->nchannels_active, 0); | 
 | 	atomic_set(&part->nchannels_engaged, 0); | 
 |  | 
 | 	for (ch_number = 0; ch_number < part->nchannels; ch_number++) { | 
 | 		ch = &part->channels[ch_number]; | 
 |  | 
 | 		ch->partid = partid; | 
 | 		ch->number = ch_number; | 
 | 		ch->flags = XPC_C_DISCONNECTED; | 
 |  | 
 | 		atomic_set(&ch->kthreads_assigned, 0); | 
 | 		atomic_set(&ch->kthreads_idle, 0); | 
 | 		atomic_set(&ch->kthreads_active, 0); | 
 |  | 
 | 		atomic_set(&ch->references, 0); | 
 | 		atomic_set(&ch->n_to_notify, 0); | 
 |  | 
 | 		spin_lock_init(&ch->lock); | 
 | 		init_completion(&ch->wdisconnect_wait); | 
 |  | 
 | 		atomic_set(&ch->n_on_msg_allocate_wq, 0); | 
 | 		init_waitqueue_head(&ch->msg_allocate_wq); | 
 | 		init_waitqueue_head(&ch->idle_wq); | 
 | 	} | 
 |  | 
 | 	ret = xpc_setup_ch_structures_sn(part); | 
 | 	if (ret != xpSuccess) | 
 | 		goto out_2; | 
 |  | 
 | 	/* | 
 | 	 * With the setting of the partition setup_state to XPC_P_SS_SETUP, | 
 | 	 * we're declaring that this partition is ready to go. | 
 | 	 */ | 
 | 	part->setup_state = XPC_P_SS_SETUP; | 
 |  | 
 | 	return xpSuccess; | 
 |  | 
 | 	/* setup of ch structures failed */ | 
 | out_2: | 
 | 	kfree(part->remote_openclose_args_base); | 
 | 	part->remote_openclose_args = NULL; | 
 | out_1: | 
 | 	kfree(part->channels); | 
 | 	part->channels = NULL; | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Teardown the channel structures necessary to support XPartition Communication | 
 |  * between the specified remote partition and the local one. | 
 |  */ | 
 | static void | 
 | xpc_teardown_ch_structures(struct xpc_partition *part) | 
 | { | 
 | 	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); | 
 | 	DBUG_ON(atomic_read(&part->nchannels_active) != 0); | 
 |  | 
 | 	/* | 
 | 	 * Make this partition inaccessible to local processes by marking it | 
 | 	 * as no longer setup. Then wait before proceeding with the teardown | 
 | 	 * until all existing references cease. | 
 | 	 */ | 
 | 	DBUG_ON(part->setup_state != XPC_P_SS_SETUP); | 
 | 	part->setup_state = XPC_P_SS_WTEARDOWN; | 
 |  | 
 | 	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); | 
 |  | 
 | 	/* now we can begin tearing down the infrastructure */ | 
 |  | 
 | 	xpc_teardown_ch_structures_sn(part); | 
 |  | 
 | 	kfree(part->remote_openclose_args_base); | 
 | 	part->remote_openclose_args = NULL; | 
 | 	kfree(part->channels); | 
 | 	part->channels = NULL; | 
 |  | 
 | 	part->setup_state = XPC_P_SS_TORNDOWN; | 
 | } | 
 |  | 
 | /* | 
 |  * When XPC HB determines that a partition has come up, it will create a new | 
 |  * kthread and that kthread will call this function to attempt to set up the | 
 |  * basic infrastructure used for Cross Partition Communication with the newly | 
 |  * upped partition. | 
 |  * | 
 |  * The kthread that was created by XPC HB and which setup the XPC | 
 |  * infrastructure will remain assigned to the partition becoming the channel | 
 |  * manager for that partition until the partition is deactivating, at which | 
 |  * time the kthread will teardown the XPC infrastructure and then exit. | 
 |  */ | 
 | static int | 
 | xpc_activating(void *__partid) | 
 | { | 
 | 	short partid = (u64)__partid; | 
 | 	struct xpc_partition *part = &xpc_partitions[partid]; | 
 | 	unsigned long irq_flags; | 
 |  | 
 | 	DBUG_ON(partid < 0 || partid >= xp_max_npartitions); | 
 |  | 
 | 	spin_lock_irqsave(&part->act_lock, irq_flags); | 
 |  | 
 | 	if (part->act_state == XPC_P_AS_DEACTIVATING) { | 
 | 		part->act_state = XPC_P_AS_INACTIVE; | 
 | 		spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 | 		part->remote_rp_pa = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* indicate the thread is activating */ | 
 | 	DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ); | 
 | 	part->act_state = XPC_P_AS_ACTIVATING; | 
 |  | 
 | 	XPC_SET_REASON(part, 0, 0); | 
 | 	spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 |  | 
 | 	dev_dbg(xpc_part, "activating partition %d\n", partid); | 
 |  | 
 | 	xpc_allow_hb(partid); | 
 |  | 
 | 	if (xpc_setup_ch_structures(part) == xpSuccess) { | 
 | 		(void)xpc_part_ref(part);	/* this will always succeed */ | 
 |  | 
 | 		if (xpc_make_first_contact(part) == xpSuccess) { | 
 | 			xpc_mark_partition_active(part); | 
 | 			xpc_channel_mgr(part); | 
 | 			/* won't return until partition is deactivating */ | 
 | 		} | 
 |  | 
 | 		xpc_part_deref(part); | 
 | 		xpc_teardown_ch_structures(part); | 
 | 	} | 
 |  | 
 | 	xpc_disallow_hb(partid); | 
 | 	xpc_mark_partition_inactive(part); | 
 |  | 
 | 	if (part->reason == xpReactivating) { | 
 | 		/* interrupting ourselves results in activating partition */ | 
 | 		xpc_request_partition_reactivation(part); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void | 
 | xpc_activate_partition(struct xpc_partition *part) | 
 | { | 
 | 	short partid = XPC_PARTID(part); | 
 | 	unsigned long irq_flags; | 
 | 	struct task_struct *kthread; | 
 |  | 
 | 	spin_lock_irqsave(&part->act_lock, irq_flags); | 
 |  | 
 | 	DBUG_ON(part->act_state != XPC_P_AS_INACTIVE); | 
 |  | 
 | 	part->act_state = XPC_P_AS_ACTIVATION_REQ; | 
 | 	XPC_SET_REASON(part, xpCloneKThread, __LINE__); | 
 |  | 
 | 	spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 |  | 
 | 	kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d", | 
 | 			      partid); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		spin_lock_irqsave(&part->act_lock, irq_flags); | 
 | 		part->act_state = XPC_P_AS_INACTIVE; | 
 | 		XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__); | 
 | 		spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | xpc_activate_kthreads(struct xpc_channel *ch, int needed) | 
 | { | 
 | 	int idle = atomic_read(&ch->kthreads_idle); | 
 | 	int assigned = atomic_read(&ch->kthreads_assigned); | 
 | 	int wakeup; | 
 |  | 
 | 	DBUG_ON(needed <= 0); | 
 |  | 
 | 	if (idle > 0) { | 
 | 		wakeup = (needed > idle) ? idle : needed; | 
 | 		needed -= wakeup; | 
 |  | 
 | 		dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, " | 
 | 			"channel=%d\n", wakeup, ch->partid, ch->number); | 
 |  | 
 | 		/* only wakeup the requested number of kthreads */ | 
 | 		wake_up_nr(&ch->idle_wq, wakeup); | 
 | 	} | 
 |  | 
 | 	if (needed <= 0) | 
 | 		return; | 
 |  | 
 | 	if (needed + assigned > ch->kthreads_assigned_limit) { | 
 | 		needed = ch->kthreads_assigned_limit - assigned; | 
 | 		if (needed <= 0) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n", | 
 | 		needed, ch->partid, ch->number); | 
 |  | 
 | 	xpc_create_kthreads(ch, needed, 0); | 
 | } | 
 |  | 
 | /* | 
 |  * This function is where XPC's kthreads wait for messages to deliver. | 
 |  */ | 
 | static void | 
 | xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) | 
 | { | 
 | 	do { | 
 | 		/* deliver messages to their intended recipients */ | 
 |  | 
 | 		while (xpc_n_of_deliverable_payloads(ch) > 0 && | 
 | 		       !(ch->flags & XPC_C_DISCONNECTING)) { | 
 | 			xpc_deliver_payload(ch); | 
 | 		} | 
 |  | 
 | 		if (atomic_inc_return(&ch->kthreads_idle) > | 
 | 		    ch->kthreads_idle_limit) { | 
 | 			/* too many idle kthreads on this channel */ | 
 | 			atomic_dec(&ch->kthreads_idle); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		dev_dbg(xpc_chan, "idle kthread calling " | 
 | 			"wait_event_interruptible_exclusive()\n"); | 
 |  | 
 | 		(void)wait_event_interruptible_exclusive(ch->idle_wq, | 
 | 				(xpc_n_of_deliverable_payloads(ch) > 0 || | 
 | 				 (ch->flags & XPC_C_DISCONNECTING))); | 
 |  | 
 | 		atomic_dec(&ch->kthreads_idle); | 
 |  | 
 | 	} while (!(ch->flags & XPC_C_DISCONNECTING)); | 
 | } | 
 |  | 
 | static int | 
 | xpc_kthread_start(void *args) | 
 | { | 
 | 	short partid = XPC_UNPACK_ARG1(args); | 
 | 	u16 ch_number = XPC_UNPACK_ARG2(args); | 
 | 	struct xpc_partition *part = &xpc_partitions[partid]; | 
 | 	struct xpc_channel *ch; | 
 | 	int n_needed; | 
 | 	unsigned long irq_flags; | 
 |  | 
 | 	dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", | 
 | 		partid, ch_number); | 
 |  | 
 | 	ch = &part->channels[ch_number]; | 
 |  | 
 | 	if (!(ch->flags & XPC_C_DISCONNECTING)) { | 
 |  | 
 | 		/* let registerer know that connection has been established */ | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) { | 
 | 			ch->flags |= XPC_C_CONNECTEDCALLOUT; | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 			xpc_connected_callout(ch); | 
 |  | 
 | 			spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 			ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE; | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 			/* | 
 | 			 * It is possible that while the callout was being | 
 | 			 * made that the remote partition sent some messages. | 
 | 			 * If that is the case, we may need to activate | 
 | 			 * additional kthreads to help deliver them. We only | 
 | 			 * need one less than total #of messages to deliver. | 
 | 			 */ | 
 | 			n_needed = xpc_n_of_deliverable_payloads(ch) - 1; | 
 | 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) | 
 | 				xpc_activate_kthreads(ch, n_needed); | 
 |  | 
 | 		} else { | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 | 		} | 
 |  | 
 | 		xpc_kthread_waitmsgs(part, ch); | 
 | 	} | 
 |  | 
 | 	/* let registerer know that connection is disconnecting */ | 
 |  | 
 | 	spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 	if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && | 
 | 	    !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { | 
 | 		ch->flags |= XPC_C_DISCONNECTINGCALLOUT; | 
 | 		spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 		xpc_disconnect_callout(ch, xpDisconnecting); | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 	if (atomic_dec_return(&ch->kthreads_assigned) == 0 && | 
 | 	    atomic_dec_return(&part->nchannels_engaged) == 0) { | 
 | 		xpc_indicate_partition_disengaged(part); | 
 | 	} | 
 |  | 
 | 	xpc_msgqueue_deref(ch); | 
 |  | 
 | 	dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n", | 
 | 		partid, ch_number); | 
 |  | 
 | 	xpc_part_deref(part); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * For each partition that XPC has established communications with, there is | 
 |  * a minimum of one kernel thread assigned to perform any operation that | 
 |  * may potentially sleep or block (basically the callouts to the asynchronous | 
 |  * functions registered via xpc_connect()). | 
 |  * | 
 |  * Additional kthreads are created and destroyed by XPC as the workload | 
 |  * demands. | 
 |  * | 
 |  * A kthread is assigned to one of the active channels that exists for a given | 
 |  * partition. | 
 |  */ | 
 | void | 
 | xpc_create_kthreads(struct xpc_channel *ch, int needed, | 
 | 		    int ignore_disconnecting) | 
 | { | 
 | 	unsigned long irq_flags; | 
 | 	u64 args = XPC_PACK_ARGS(ch->partid, ch->number); | 
 | 	struct xpc_partition *part = &xpc_partitions[ch->partid]; | 
 | 	struct task_struct *kthread; | 
 |  | 
 | 	while (needed-- > 0) { | 
 |  | 
 | 		/* | 
 | 		 * The following is done on behalf of the newly created | 
 | 		 * kthread. That kthread is responsible for doing the | 
 | 		 * counterpart to the following before it exits. | 
 | 		 */ | 
 | 		if (ignore_disconnecting) { | 
 | 			if (!atomic_inc_not_zero(&ch->kthreads_assigned)) { | 
 | 				/* kthreads assigned had gone to zero */ | 
 | 				BUG_ON(!(ch->flags & | 
 | 					 XPC_C_DISCONNECTINGCALLOUT_MADE)); | 
 | 				break; | 
 | 			} | 
 |  | 
 | 		} else if (ch->flags & XPC_C_DISCONNECTING) { | 
 | 			break; | 
 |  | 
 | 		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 && | 
 | 			   atomic_inc_return(&part->nchannels_engaged) == 1) { | 
 | 				xpc_indicate_partition_engaged(part); | 
 | 		} | 
 | 		(void)xpc_part_ref(part); | 
 | 		xpc_msgqueue_ref(ch); | 
 |  | 
 | 		kthread = kthread_run(xpc_kthread_start, (void *)args, | 
 | 				      "xpc%02dc%d", ch->partid, ch->number); | 
 | 		if (IS_ERR(kthread)) { | 
 | 			/* the fork failed */ | 
 |  | 
 | 			/* | 
 | 			 * NOTE: if (ignore_disconnecting && | 
 | 			 * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true, | 
 | 			 * then we'll deadlock if all other kthreads assigned | 
 | 			 * to this channel are blocked in the channel's | 
 | 			 * registerer, because the only thing that will unblock | 
 | 			 * them is the xpDisconnecting callout that this | 
 | 			 * failed kthread_run() would have made. | 
 | 			 */ | 
 |  | 
 | 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 && | 
 | 			    atomic_dec_return(&part->nchannels_engaged) == 0) { | 
 | 				xpc_indicate_partition_disengaged(part); | 
 | 			} | 
 | 			xpc_msgqueue_deref(ch); | 
 | 			xpc_part_deref(part); | 
 |  | 
 | 			if (atomic_read(&ch->kthreads_assigned) < | 
 | 			    ch->kthreads_idle_limit) { | 
 | 				/* | 
 | 				 * Flag this as an error only if we have an | 
 | 				 * insufficient #of kthreads for the channel | 
 | 				 * to function. | 
 | 				 */ | 
 | 				spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 				XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources, | 
 | 						       &irq_flags); | 
 | 				spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | xpc_disconnect_wait(int ch_number) | 
 | { | 
 | 	unsigned long irq_flags; | 
 | 	short partid; | 
 | 	struct xpc_partition *part; | 
 | 	struct xpc_channel *ch; | 
 | 	int wakeup_channel_mgr; | 
 |  | 
 | 	/* now wait for all callouts to the caller's function to cease */ | 
 | 	for (partid = 0; partid < xp_max_npartitions; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		if (!xpc_part_ref(part)) | 
 | 			continue; | 
 |  | 
 | 		ch = &part->channels[ch_number]; | 
 |  | 
 | 		if (!(ch->flags & XPC_C_WDISCONNECT)) { | 
 | 			xpc_part_deref(part); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		wait_for_completion(&ch->wdisconnect_wait); | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); | 
 | 		wakeup_channel_mgr = 0; | 
 |  | 
 | 		if (ch->delayed_chctl_flags) { | 
 | 			if (part->act_state != XPC_P_AS_DEACTIVATING) { | 
 | 				spin_lock(&part->chctl_lock); | 
 | 				part->chctl.flags[ch->number] |= | 
 | 				    ch->delayed_chctl_flags; | 
 | 				spin_unlock(&part->chctl_lock); | 
 | 				wakeup_channel_mgr = 1; | 
 | 			} | 
 | 			ch->delayed_chctl_flags = 0; | 
 | 		} | 
 |  | 
 | 		ch->flags &= ~XPC_C_WDISCONNECT; | 
 | 		spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 		if (wakeup_channel_mgr) | 
 | 			xpc_wakeup_channel_mgr(part); | 
 |  | 
 | 		xpc_part_deref(part); | 
 | 	} | 
 | } | 
 |  | 
 | static int | 
 | xpc_setup_partitions(void) | 
 | { | 
 | 	short partid; | 
 | 	struct xpc_partition *part; | 
 |  | 
 | 	xpc_partitions = kzalloc(sizeof(struct xpc_partition) * | 
 | 				 xp_max_npartitions, GFP_KERNEL); | 
 | 	if (xpc_partitions == NULL) { | 
 | 		dev_err(xpc_part, "can't get memory for partition structure\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * The first few fields of each entry of xpc_partitions[] need to | 
 | 	 * be initialized now so that calls to xpc_connect() and | 
 | 	 * xpc_disconnect() can be made prior to the activation of any remote | 
 | 	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE | 
 | 	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING | 
 | 	 * PARTITION HAS BEEN ACTIVATED. | 
 | 	 */ | 
 | 	for (partid = 0; partid < xp_max_npartitions; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); | 
 |  | 
 | 		part->activate_IRQ_rcvd = 0; | 
 | 		spin_lock_init(&part->act_lock); | 
 | 		part->act_state = XPC_P_AS_INACTIVE; | 
 | 		XPC_SET_REASON(part, 0, 0); | 
 |  | 
 | 		init_timer(&part->disengage_timer); | 
 | 		part->disengage_timer.function = | 
 | 		    xpc_timeout_partition_disengage; | 
 | 		part->disengage_timer.data = (unsigned long)part; | 
 |  | 
 | 		part->setup_state = XPC_P_SS_UNSET; | 
 | 		init_waitqueue_head(&part->teardown_wq); | 
 | 		atomic_set(&part->references, 0); | 
 | 	} | 
 |  | 
 | 	return xpc_setup_partitions_sn(); | 
 | } | 
 |  | 
 | static void | 
 | xpc_teardown_partitions(void) | 
 | { | 
 | 	kfree(xpc_partitions); | 
 | } | 
 |  | 
 | static void | 
 | xpc_do_exit(enum xp_retval reason) | 
 | { | 
 | 	short partid; | 
 | 	int active_part_count, printed_waiting_msg = 0; | 
 | 	struct xpc_partition *part; | 
 | 	unsigned long printmsg_time, disengage_timeout = 0; | 
 |  | 
 | 	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ | 
 | 	DBUG_ON(xpc_exiting == 1); | 
 |  | 
 | 	/* | 
 | 	 * Let the heartbeat checker thread and the discovery thread | 
 | 	 * (if one is running) know that they should exit. Also wake up | 
 | 	 * the heartbeat checker thread in case it's sleeping. | 
 | 	 */ | 
 | 	xpc_exiting = 1; | 
 | 	wake_up_interruptible(&xpc_activate_IRQ_wq); | 
 |  | 
 | 	/* wait for the discovery thread to exit */ | 
 | 	wait_for_completion(&xpc_discovery_exited); | 
 |  | 
 | 	/* wait for the heartbeat checker thread to exit */ | 
 | 	wait_for_completion(&xpc_hb_checker_exited); | 
 |  | 
 | 	/* sleep for a 1/3 of a second or so */ | 
 | 	(void)msleep_interruptible(300); | 
 |  | 
 | 	/* wait for all partitions to become inactive */ | 
 |  | 
 | 	printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); | 
 | 	xpc_disengage_timedout = 0; | 
 |  | 
 | 	do { | 
 | 		active_part_count = 0; | 
 |  | 
 | 		for (partid = 0; partid < xp_max_npartitions; partid++) { | 
 | 			part = &xpc_partitions[partid]; | 
 |  | 
 | 			if (xpc_partition_disengaged(part) && | 
 | 			    part->act_state == XPC_P_AS_INACTIVE) { | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			active_part_count++; | 
 |  | 
 | 			XPC_DEACTIVATE_PARTITION(part, reason); | 
 |  | 
 | 			if (part->disengage_timeout > disengage_timeout) | 
 | 				disengage_timeout = part->disengage_timeout; | 
 | 		} | 
 |  | 
 | 		if (xpc_any_partition_engaged()) { | 
 | 			if (time_is_before_jiffies(printmsg_time)) { | 
 | 				dev_info(xpc_part, "waiting for remote " | 
 | 					 "partitions to deactivate, timeout in " | 
 | 					 "%ld seconds\n", (disengage_timeout - | 
 | 					 jiffies) / HZ); | 
 | 				printmsg_time = jiffies + | 
 | 				    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); | 
 | 				printed_waiting_msg = 1; | 
 | 			} | 
 |  | 
 | 		} else if (active_part_count > 0) { | 
 | 			if (printed_waiting_msg) { | 
 | 				dev_info(xpc_part, "waiting for local partition" | 
 | 					 " to deactivate\n"); | 
 | 				printed_waiting_msg = 0; | 
 | 			} | 
 |  | 
 | 		} else { | 
 | 			if (!xpc_disengage_timedout) { | 
 | 				dev_info(xpc_part, "all partitions have " | 
 | 					 "deactivated\n"); | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* sleep for a 1/3 of a second or so */ | 
 | 		(void)msleep_interruptible(300); | 
 |  | 
 | 	} while (1); | 
 |  | 
 | 	DBUG_ON(xpc_any_partition_engaged()); | 
 | 	DBUG_ON(xpc_any_hbs_allowed() != 0); | 
 |  | 
 | 	xpc_teardown_rsvd_page(); | 
 |  | 
 | 	if (reason == xpUnloading) { | 
 | 		(void)unregister_die_notifier(&xpc_die_notifier); | 
 | 		(void)unregister_reboot_notifier(&xpc_reboot_notifier); | 
 | 	} | 
 |  | 
 | 	/* clear the interface to XPC's functions */ | 
 | 	xpc_clear_interface(); | 
 |  | 
 | 	if (xpc_sysctl) | 
 | 		unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 	xpc_teardown_partitions(); | 
 |  | 
 | 	if (is_shub()) | 
 | 		xpc_exit_sn2(); | 
 | 	else if (is_uv()) | 
 | 		xpc_exit_uv(); | 
 | } | 
 |  | 
 | /* | 
 |  * This function is called when the system is being rebooted. | 
 |  */ | 
 | static int | 
 | xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) | 
 | { | 
 | 	enum xp_retval reason; | 
 |  | 
 | 	switch (event) { | 
 | 	case SYS_RESTART: | 
 | 		reason = xpSystemReboot; | 
 | 		break; | 
 | 	case SYS_HALT: | 
 | 		reason = xpSystemHalt; | 
 | 		break; | 
 | 	case SYS_POWER_OFF: | 
 | 		reason = xpSystemPoweroff; | 
 | 		break; | 
 | 	default: | 
 | 		reason = xpSystemGoingDown; | 
 | 	} | 
 |  | 
 | 	xpc_do_exit(reason); | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | /* | 
 |  * Notify other partitions to deactivate from us by first disengaging from all | 
 |  * references to our memory. | 
 |  */ | 
 | static void | 
 | xpc_die_deactivate(void) | 
 | { | 
 | 	struct xpc_partition *part; | 
 | 	short partid; | 
 | 	int any_engaged; | 
 | 	long keep_waiting; | 
 | 	long wait_to_print; | 
 |  | 
 | 	/* keep xpc_hb_checker thread from doing anything (just in case) */ | 
 | 	xpc_exiting = 1; | 
 |  | 
 | 	xpc_disallow_all_hbs();	/*indicate we're deactivated */ | 
 |  | 
 | 	for (partid = 0; partid < xp_max_npartitions; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		if (xpc_partition_engaged(partid) || | 
 | 		    part->act_state != XPC_P_AS_INACTIVE) { | 
 | 			xpc_request_partition_deactivation(part); | 
 | 			xpc_indicate_partition_disengaged(part); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Though we requested that all other partitions deactivate from us, | 
 | 	 * we only wait until they've all disengaged or we've reached the | 
 | 	 * defined timelimit. | 
 | 	 * | 
 | 	 * Given that one iteration through the following while-loop takes | 
 | 	 * approximately 200 microseconds, calculate the #of loops to take | 
 | 	 * before bailing and the #of loops before printing a waiting message. | 
 | 	 */ | 
 | 	keep_waiting = xpc_disengage_timelimit * 1000 * 5; | 
 | 	wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5; | 
 |  | 
 | 	while (1) { | 
 | 		any_engaged = xpc_any_partition_engaged(); | 
 | 		if (!any_engaged) { | 
 | 			dev_info(xpc_part, "all partitions have deactivated\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (!keep_waiting--) { | 
 | 			for (partid = 0; partid < xp_max_npartitions; | 
 | 			     partid++) { | 
 | 				if (xpc_partition_engaged(partid)) { | 
 | 					dev_info(xpc_part, "deactivate from " | 
 | 						 "remote partition %d timed " | 
 | 						 "out\n", partid); | 
 | 				} | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (!wait_to_print--) { | 
 | 			dev_info(xpc_part, "waiting for remote partitions to " | 
 | 				 "deactivate, timeout in %ld seconds\n", | 
 | 				 keep_waiting / (1000 * 5)); | 
 | 			wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * | 
 | 			    1000 * 5; | 
 | 		} | 
 |  | 
 | 		udelay(200); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * This function is called when the system is being restarted or halted due | 
 |  * to some sort of system failure. If this is the case we need to notify the | 
 |  * other partitions to disengage from all references to our memory. | 
 |  * This function can also be called when our heartbeater could be offlined | 
 |  * for a time. In this case we need to notify other partitions to not worry | 
 |  * about the lack of a heartbeat. | 
 |  */ | 
 | static int | 
 | xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) | 
 | { | 
 | #ifdef CONFIG_IA64		/* !!! temporary kludge */ | 
 | 	switch (event) { | 
 | 	case DIE_MACHINE_RESTART: | 
 | 	case DIE_MACHINE_HALT: | 
 | 		xpc_die_deactivate(); | 
 | 		break; | 
 |  | 
 | 	case DIE_KDEBUG_ENTER: | 
 | 		/* Should lack of heartbeat be ignored by other partitions? */ | 
 | 		if (!xpc_kdebug_ignore) | 
 | 			break; | 
 |  | 
 | 		/* fall through */ | 
 | 	case DIE_MCA_MONARCH_ENTER: | 
 | 	case DIE_INIT_MONARCH_ENTER: | 
 | 		xpc_offline_heartbeat(); | 
 | 		break; | 
 |  | 
 | 	case DIE_KDEBUG_LEAVE: | 
 | 		/* Is lack of heartbeat being ignored by other partitions? */ | 
 | 		if (!xpc_kdebug_ignore) | 
 | 			break; | 
 |  | 
 | 		/* fall through */ | 
 | 	case DIE_MCA_MONARCH_LEAVE: | 
 | 	case DIE_INIT_MONARCH_LEAVE: | 
 | 		xpc_online_heartbeat(); | 
 | 		break; | 
 | 	} | 
 | #else | 
 | 	xpc_die_deactivate(); | 
 | #endif | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | int __init | 
 | xpc_init(void) | 
 | { | 
 | 	int ret; | 
 | 	struct task_struct *kthread; | 
 |  | 
 | 	dev_set_name(xpc_part, "part"); | 
 | 	dev_set_name(xpc_chan, "chan"); | 
 |  | 
 | 	if (is_shub()) { | 
 | 		/* | 
 | 		 * The ia64-sn2 architecture supports at most 64 partitions. | 
 | 		 * And the inability to unregister remote amos restricts us | 
 | 		 * further to only support exactly 64 partitions on this | 
 | 		 * architecture, no less. | 
 | 		 */ | 
 | 		if (xp_max_npartitions != 64) { | 
 | 			dev_err(xpc_part, "max #of partitions not set to 64\n"); | 
 | 			ret = -EINVAL; | 
 | 		} else { | 
 | 			ret = xpc_init_sn2(); | 
 | 		} | 
 |  | 
 | 	} else if (is_uv()) { | 
 | 		ret = xpc_init_uv(); | 
 |  | 
 | 	} else { | 
 | 		ret = -ENODEV; | 
 | 	} | 
 |  | 
 | 	if (ret != 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = xpc_setup_partitions(); | 
 | 	if (ret != 0) { | 
 | 		dev_err(xpc_part, "can't get memory for partition structure\n"); | 
 | 		goto out_1; | 
 | 	} | 
 |  | 
 | 	xpc_sysctl = register_sysctl_table(xpc_sys_dir); | 
 |  | 
 | 	/* | 
 | 	 * Fill the partition reserved page with the information needed by | 
 | 	 * other partitions to discover we are alive and establish initial | 
 | 	 * communications. | 
 | 	 */ | 
 | 	ret = xpc_setup_rsvd_page(); | 
 | 	if (ret != 0) { | 
 | 		dev_err(xpc_part, "can't setup our reserved page\n"); | 
 | 		goto out_2; | 
 | 	} | 
 |  | 
 | 	/* add ourselves to the reboot_notifier_list */ | 
 | 	ret = register_reboot_notifier(&xpc_reboot_notifier); | 
 | 	if (ret != 0) | 
 | 		dev_warn(xpc_part, "can't register reboot notifier\n"); | 
 |  | 
 | 	/* add ourselves to the die_notifier list */ | 
 | 	ret = register_die_notifier(&xpc_die_notifier); | 
 | 	if (ret != 0) | 
 | 		dev_warn(xpc_part, "can't register die notifier\n"); | 
 |  | 
 | 	/* | 
 | 	 * The real work-horse behind xpc.  This processes incoming | 
 | 	 * interrupts and monitors remote heartbeats. | 
 | 	 */ | 
 | 	kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		dev_err(xpc_part, "failed while forking hb check thread\n"); | 
 | 		ret = -EBUSY; | 
 | 		goto out_3; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Startup a thread that will attempt to discover other partitions to | 
 | 	 * activate based on info provided by SAL. This new thread is short | 
 | 	 * lived and will exit once discovery is complete. | 
 | 	 */ | 
 | 	kthread = kthread_run(xpc_initiate_discovery, NULL, | 
 | 			      XPC_DISCOVERY_THREAD_NAME); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		dev_err(xpc_part, "failed while forking discovery thread\n"); | 
 |  | 
 | 		/* mark this new thread as a non-starter */ | 
 | 		complete(&xpc_discovery_exited); | 
 |  | 
 | 		xpc_do_exit(xpUnloading); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* set the interface to point at XPC's functions */ | 
 | 	xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, | 
 | 			  xpc_initiate_send, xpc_initiate_send_notify, | 
 | 			  xpc_initiate_received, xpc_initiate_partid_to_nasids); | 
 |  | 
 | 	return 0; | 
 |  | 
 | 	/* initialization was not successful */ | 
 | out_3: | 
 | 	xpc_teardown_rsvd_page(); | 
 |  | 
 | 	(void)unregister_die_notifier(&xpc_die_notifier); | 
 | 	(void)unregister_reboot_notifier(&xpc_reboot_notifier); | 
 | out_2: | 
 | 	if (xpc_sysctl) | 
 | 		unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 	xpc_teardown_partitions(); | 
 | out_1: | 
 | 	if (is_shub()) | 
 | 		xpc_exit_sn2(); | 
 | 	else if (is_uv()) | 
 | 		xpc_exit_uv(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | module_init(xpc_init); | 
 |  | 
 | void __exit | 
 | xpc_exit(void) | 
 | { | 
 | 	xpc_do_exit(xpUnloading); | 
 | } | 
 |  | 
 | module_exit(xpc_exit); | 
 |  | 
 | MODULE_AUTHOR("Silicon Graphics, Inc."); | 
 | MODULE_DESCRIPTION("Cross Partition Communication (XPC) support"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_param(xpc_hb_interval, int, 0); | 
 | MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between " | 
 | 		 "heartbeat increments."); | 
 |  | 
 | module_param(xpc_hb_check_interval, int, 0); | 
 | MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " | 
 | 		 "heartbeat checks."); | 
 |  | 
 | module_param(xpc_disengage_timelimit, int, 0); | 
 | MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait " | 
 | 		 "for disengage to complete."); | 
 |  | 
 | module_param(xpc_kdebug_ignore, int, 0); | 
 | MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " | 
 | 		 "other partitions when dropping into kdebug."); |