blob: 44cc4ff1d0df358ab66bb036d127175da1be74b6 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2021 PHYTEC Messtechnik GmbH
* Author: Alexander Bauer <a.bauer@phytec.de>
*/
/dts-v1/;
#include "imx6ull.dtsi"
#include "imx6ull-phytec-phycore-som.dtsi"
/ {
aliases {
rtc0 = &i2c_rtc;
rtc1 = &snvs_rtc;
};
gpio_keys: gpio-keys {
compatible = "gpio-key";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
key {
label = "KEY-A";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_A>;
wakeup-source;
};
};
reg_adc1_vref_3v3: regulator-vref-3v3 {
compatible = "regulator-fixed";
regulator-name = "vref-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_s25fl064_hold: regulator-s25fl064-hold {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_s25fl064_hold>;
compatible = "regulator-fixed";
regulator-name = "s25fl064_hold";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_usb_hub_vbus: regulator-hub-otg1-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhubpwr>;
compatible = "regulator-fixed";
regulator-name = "usb_hub_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1pwr>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
user_leds: user-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_user_leds>,
<&pinctrl_user_leds_snvs>;
user-led1 {
label = "yellow";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "off";
};
user-led2 {
label = "red";
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "off";
};
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
status = "okay";
};
&ecspi1 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>,
<&pinctrl_ecspi1_cs>;
cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
<&gpio3 10 GPIO_ACTIVE_LOW>,
<&gpio3 11 GPIO_ACTIVE_LOW>;
status = "okay";
tpm_tis: tpm@1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
compatible = "tcg,tpm_tis-spi";
reg = <1>;
spi-max-frequency = <20000000>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
};
s25fl064: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = " jedec,spi-nor";
reg = <2>;
spi-max-frequency = <40000000>;
m25p,fast-read;
status = "disabled";
};
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
dmas = <&sdma 7 8 0>,
<&sdma 8 8 0>;
dma-names = "rx", "tx";
status = "okay";
};
&ethphy1 {
status = "okay";
};
&fec1 {
status = "okay";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy2>;
status = "okay";
};
&i2c1 {
status = "okay";
tmp102: tmp@49 {
compatible = "ti,tmp102";
reg = <0x49>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tempsense>;
interrupt-parent = <&gpio5>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
i2c_rtc: rtc@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_int>;
compatible = "microcrystal,rv4162";
reg = <0x68>;
interrupt-parent = <&gpio5>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c4 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
pinctrl-1 = <&pinctrl_i2c4_gpio>;
sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&mdio {
ethphy2: ethernet-phy@2 {
reg = <2>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
clock-names = "rmii-ref";
status = "okay";
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
status = "okay";
};
&pwm7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
status = "okay";
};
&pwm8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* UART4 * RS485 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
/* UART5 * RS232 */
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
uart-has-rtscts;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart7>;
status = "okay";
};
/* USB */
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1>;
vbus-supply = <&reg_usb_otg1_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_hub_vbus>;
disable-over-current;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
wakeup-source;
status = "okay";
};
&usdhc2 {
status = "disabled";
};
&iomuxc_snvs {
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
pinctrl_stmpe: stmpegrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
>;
};
pinctrl_tempsense: tempsensegrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
>;
};
pinctrl_tpm: tpmgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
>;
};
pinctrl_usbhubpwr: usbhubpwrgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059
>;
};
pinctrl_user_leds_snvs: user_ledsgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
>;
};
};
&iomuxc {
pinctrl_gpio: gpiogrp {
fsl,pins = <
MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */
MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1
MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1
MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1
MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1
MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1
MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1
>;
};
pinctrl_ecspi1_cs: ecspi1csgrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0
MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0
>;
};
princtrl_flexcan2_en: flexcan2engrp {
fsl,pins = <
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0
MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0
MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0
>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0
MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0
MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0
>;
};
pinctrl_i2c4_gpio: i2c4gpiogrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0
MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
>;
};
pinctrl_pwm6: pwm6grp {
fsl,pins = <
MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0
>;
};
pinctrl_pwm7: pwm7grp {
fsl,pins = <
MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0
>;
};
pinctrl_pwm8: pwm8grp {
fsl,pins = <
MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0
>;
};
pinctrl_s25fl064_hold: s25fl064holdgrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1
MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1
MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
pinctrl_uart7: uart7grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1
MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1
>;
};
pinctrl_usb_otg1: usbotg1grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80
>;
};
pinctrl_usbotg1pwr: usbotg1pwrgrp {
fsl,pins = <
MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
>;
};
pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
>;
};
pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
pinctrl_user_leds: userledsgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79
>;
};
};