blob: c323f6d495a4495635ad0de9b7353315f28fa86c [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. QCM2290 TLMM block
maintainers:
- Shawn Guo <shawn.guo@linaro.org>
description:
Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC.
properties:
compatible:
const: qcom,qcm2290-tlmm
reg:
maxItems: 1
interrupts:
maxItems: 1
interrupt-controller: true
"#interrupt-cells": true
gpio-controller: true
"#gpio-cells": true
gpio-ranges: true
wakeup-parent: true
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-qcm2290-tlmm-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-qcm2290-tlmm-state"
additionalProperties: false
$defs:
qcom-qcm2290-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$"
- enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
sdc2_clk, sdc2_cmd, sdc2_data ]
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec,
cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist,
ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2,
gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx,
jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1,
mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1,
pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11,
pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist,
pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3,
pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write,
ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
vsense_trigger, wlan1_adc0, wlan1_adc1 ]
required:
- pins
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@500000 {
compatible = "qcom,qcm2290-tlmm";
reg = <0x500000 0x300000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 127>;
sdc2_on_state: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
};