| Kernel Driver Lochnagar |
| ======================= |
| |
| Supported systems: |
| * Cirrus Logic : Lochnagar 2 |
| |
| Author: Lucas A. Tanure Alves |
| |
| Description |
| ----------- |
| |
| Lochnagar 2 features built-in Current Monitor circuitry that allows for the |
| measurement of both voltage and current on up to eight of the supply voltage |
| rails provided to the minicards. The Current Monitor does not require any |
| hardware modifications or external circuitry to operate. |
| |
| The current and voltage measurements are obtained through the standard register |
| map interface to the Lochnagar board controller, and can therefore be monitored |
| by software. |
| |
| Sysfs attributes |
| ---------------- |
| |
| ======================= ======================================================= |
| temp1_input The Lochnagar board temperature (milliCelsius) |
| in0_input Measured voltage for DBVDD1 (milliVolts) |
| in0_label "DBVDD1" |
| curr1_input Measured current for DBVDD1 (milliAmps) |
| curr1_label "DBVDD1" |
| power1_average Measured average power for DBVDD1 (microWatts) |
| power1_average_interval Power averaging time input valid from 1 to 1708mS |
| power1_label "DBVDD1" |
| in1_input Measured voltage for 1V8 DSP (milliVolts) |
| in1_label "1V8 DSP" |
| curr2_input Measured current for 1V8 DSP (milliAmps) |
| curr2_label "1V8 DSP" |
| power2_average Measured average power for 1V8 DSP (microWatts) |
| power2_average_interval Power averaging time input valid from 1 to 1708mS |
| power2_label "1V8 DSP" |
| in2_input Measured voltage for 1V8 CDC (milliVolts) |
| in2_label "1V8 CDC" |
| curr3_input Measured current for 1V8 CDC (milliAmps) |
| curr3_label "1V8 CDC" |
| power3_average Measured average power for 1V8 CDC (microWatts) |
| power3_average_interval Power averaging time input valid from 1 to 1708mS |
| power3_label "1V8 CDC" |
| in3_input Measured voltage for VDDCORE DSP (milliVolts) |
| in3_label "VDDCORE DSP" |
| curr4_input Measured current for VDDCORE DSP (milliAmps) |
| curr4_label "VDDCORE DSP" |
| power4_average Measured average power for VDDCORE DSP (microWatts) |
| power4_average_interval Power averaging time input valid from 1 to 1708mS |
| power4_label "VDDCORE DSP" |
| in4_input Measured voltage for AVDD 1V8 (milliVolts) |
| in4_label "AVDD 1V8" |
| curr5_input Measured current for AVDD 1V8 (milliAmps) |
| curr5_label "AVDD 1V8" |
| power5_average Measured average power for AVDD 1V8 (microWatts) |
| power5_average_interval Power averaging time input valid from 1 to 1708mS |
| power5_label "AVDD 1V8" |
| curr6_input Measured current for SYSVDD (milliAmps) |
| curr6_label "SYSVDD" |
| power6_average Measured average power for SYSVDD (microWatts) |
| power6_average_interval Power averaging time input valid from 1 to 1708mS |
| power6_label "SYSVDD" |
| in6_input Measured voltage for VDDCORE CDC (milliVolts) |
| in6_label "VDDCORE CDC" |
| curr7_input Measured current for VDDCORE CDC (milliAmps) |
| curr7_label "VDDCORE CDC" |
| power7_average Measured average power for VDDCORE CDC (microWatts) |
| power7_average_interval Power averaging time input valid from 1 to 1708mS |
| power7_label "VDDCORE CDC" |
| in7_input Measured voltage for MICVDD (milliVolts) |
| in7_label "MICVDD" |
| curr8_input Measured current for MICVDD (milliAmps) |
| curr8_label "MICVDD" |
| power8_average Measured average power for MICVDD (microWatts) |
| power8_average_interval Power averaging time input valid from 1 to 1708mS |
| power8_label "MICVDD" |
| ======================= ======================================================= |
| |
| Note: |
| It is not possible to measure voltage on the SYSVDD rail. |