| /* ld script to make i386 Linux kernel |
| * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; |
| * |
| * Don't define absolute symbols until and unless you know that symbol |
| * value is should remain constant even if kernel image is relocated |
| * at run time. Absolute symbols are not relocated. If symbol value should |
| * change if kernel is relocated, make the symbol section relative and |
| * put it inside the section definition. |
| */ |
| |
| #define LOAD_OFFSET __PAGE_OFFSET |
| |
| #include <asm-generic/vmlinux.lds.h> |
| #include <asm/thread_info.h> |
| #include <asm/page.h> |
| #include <asm/cache.h> |
| #include <asm/boot.h> |
| |
| OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") |
| OUTPUT_ARCH(i386) |
| ENTRY(phys_startup_32) |
| jiffies = jiffies_64; |
| |
| PHDRS { |
| text PT_LOAD FLAGS(5); /* R_E */ |
| data PT_LOAD FLAGS(7); /* RWE */ |
| note PT_NOTE FLAGS(0); /* ___ */ |
| } |
| SECTIONS |
| { |
| . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; |
| phys_startup_32 = startup_32 - LOAD_OFFSET; |
| |
| .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { |
| _text = .; /* Text and read-only data */ |
| *(.text.head) |
| } :text = 0x9090 |
| |
| /* read-only */ |
| .text : AT(ADDR(.text) - LOAD_OFFSET) { |
| . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */ |
| *(.text.page_aligned) |
| TEXT_TEXT |
| SCHED_TEXT |
| LOCK_TEXT |
| KPROBES_TEXT |
| *(.fixup) |
| *(.gnu.warning) |
| _etext = .; /* End of text section */ |
| } :text = 0x9090 |
| |
| . = ALIGN(16); /* Exception table */ |
| __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { |
| __start___ex_table = .; |
| *(__ex_table) |
| __stop___ex_table = .; |
| } |
| |
| NOTES :text :note |
| |
| BUG_TABLE :text |
| |
| . = ALIGN(4); |
| .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { |
| __tracedata_start = .; |
| *(.tracedata) |
| __tracedata_end = .; |
| } |
| |
| RODATA |
| |
| /* writeable */ |
| . = ALIGN(PAGE_SIZE); |
| .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ |
| DATA_DATA |
| CONSTRUCTORS |
| } :data |
| |
| . = ALIGN(PAGE_SIZE); |
| .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { |
| __nosave_begin = .; |
| *(.data.nosave) |
| . = ALIGN(PAGE_SIZE); |
| __nosave_end = .; |
| } |
| |
| . = ALIGN(PAGE_SIZE); |
| .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { |
| *(.data.page_aligned) |
| *(.data.idt) |
| } |
| |
| . = ALIGN(32); |
| .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { |
| *(.data.cacheline_aligned) |
| } |
| |
| /* rarely changed data like cpu maps */ |
| . = ALIGN(32); |
| .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { |
| *(.data.read_mostly) |
| _edata = .; /* End of data section */ |
| } |
| |
| . = ALIGN(THREAD_SIZE); /* init_task */ |
| .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { |
| *(.data.init_task) |
| } |
| |
| /* might get freed after init */ |
| . = ALIGN(PAGE_SIZE); |
| .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { |
| __smp_locks = .; |
| *(.smp_locks) |
| __smp_locks_end = .; |
| } |
| /* will be freed after init |
| * Following ALIGN() is required to make sure no other data falls on the |
| * same page where __smp_alt_end is pointing as that page might be freed |
| * after boot. Always make sure that ALIGN() directive is present after |
| * the section which contains __smp_alt_end. |
| */ |
| . = ALIGN(PAGE_SIZE); |
| |
| /* will be freed after init */ |
| . = ALIGN(PAGE_SIZE); /* Init code and data */ |
| .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { |
| __init_begin = .; |
| _sinittext = .; |
| INIT_TEXT |
| _einittext = .; |
| } |
| .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { |
| INIT_DATA |
| } |
| . = ALIGN(16); |
| .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { |
| __setup_start = .; |
| *(.init.setup) |
| __setup_end = .; |
| } |
| .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { |
| __initcall_start = .; |
| INITCALLS |
| __initcall_end = .; |
| } |
| .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { |
| __con_initcall_start = .; |
| *(.con_initcall.init) |
| __con_initcall_end = .; |
| } |
| SECURITY_INIT |
| . = ALIGN(4); |
| .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { |
| __alt_instructions = .; |
| *(.altinstructions) |
| __alt_instructions_end = .; |
| } |
| .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { |
| *(.altinstr_replacement) |
| } |
| . = ALIGN(4); |
| .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { |
| __parainstructions = .; |
| *(.parainstructions) |
| __parainstructions_end = .; |
| } |
| /* .exit.text is discard at runtime, not link time, to deal with references |
| from .altinstructions and .eh_frame */ |
| .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { |
| EXIT_TEXT |
| } |
| .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { |
| EXIT_DATA |
| } |
| #if defined(CONFIG_BLK_DEV_INITRD) |
| . = ALIGN(PAGE_SIZE); |
| .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { |
| __initramfs_start = .; |
| *(.init.ramfs) |
| __initramfs_end = .; |
| } |
| #endif |
| . = ALIGN(PAGE_SIZE); |
| .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { |
| __per_cpu_start = .; |
| *(.data.percpu) |
| *(.data.percpu.shared_aligned) |
| __per_cpu_end = .; |
| } |
| . = ALIGN(PAGE_SIZE); |
| /* freed after init ends here */ |
| |
| .bss : AT(ADDR(.bss) - LOAD_OFFSET) { |
| __init_end = .; |
| __bss_start = .; /* BSS */ |
| *(.bss.page_aligned) |
| *(.bss) |
| . = ALIGN(4); |
| __bss_stop = .; |
| _end = . ; |
| /* This is where the kernel creates the early boot page tables */ |
| . = ALIGN(PAGE_SIZE); |
| pg0 = . ; |
| } |
| |
| /* Sections to be discarded */ |
| /DISCARD/ : { |
| *(.exitcall.exit) |
| } |
| |
| STABS_DEBUG |
| |
| DWARF_DEBUG |
| } |