| /* |
| * arch/blackfin/kernel/reboot.c - handle shutdown/reboot |
| * |
| * Copyright 2004-2007 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <asm/bfin-global.h> |
| #include <asm/reboot.h> |
| #include <asm/system.h> |
| |
| #if defined(BF537_FAMILY) || defined(BF533_FAMILY) || defined(BF527_FAMILY) |
| #define SYSCR_VAL 0x0 |
| #elif defined(BF561_FAMILY) |
| #define SYSCR_VAL 0x20 |
| #elif defined(BF548_FAMILY) |
| #define SYSCR_VAL 0x10 |
| #endif |
| |
| /* |
| * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) |
| */ |
| #define SWRST_DELAY (5 * 15) |
| |
| /* A system soft reset makes external memory unusable |
| * so force this function into L1. |
| */ |
| __attribute__((l1_text)) |
| void bfin_reset(void) |
| { |
| /* force BMODE and disable Core B (as needed) */ |
| bfin_write_SYSCR(SYSCR_VAL); |
| |
| /* we use asm ssync here because it's save and we save some L1 */ |
| asm("ssync;"); |
| |
| while (1) { |
| /* initiate system soft reset with magic 0x7 */ |
| bfin_write_SWRST(0x7); |
| |
| /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ |
| /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ |
| |
| asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" |
| : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); |
| |
| /* clear system soft reset */ |
| bfin_write_SWRST(0); |
| asm("ssync;"); |
| /* issue core reset */ |
| asm("raise 1"); |
| } |
| } |
| |
| __attribute__((weak)) |
| void native_machine_restart(char *cmd) |
| { |
| } |
| |
| void machine_restart(char *cmd) |
| { |
| native_machine_restart(cmd); |
| local_irq_disable(); |
| bfin_reset(); |
| } |
| |
| __attribute__((weak)) |
| void native_machine_halt(void) |
| { |
| idle_with_irq_disabled(); |
| } |
| |
| void machine_halt(void) |
| { |
| native_machine_halt(); |
| } |
| |
| __attribute__((weak)) |
| void native_machine_power_off(void) |
| { |
| idle_with_irq_disabled(); |
| } |
| |
| void machine_power_off(void) |
| { |
| native_machine_power_off(); |
| } |