| /* |
| * SH generic board support, using device tree |
| * |
| * Copyright (C) 2015-2016 Smart Energy Instruments, Inc. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/of.h> |
| #include <linux/of_fdt.h> |
| #include <linux/clocksource.h> |
| #include <linux/irqchip.h> |
| #include <linux/clk-provider.h> |
| #include <asm/machvec.h> |
| #include <asm/rtc.h> |
| |
| #ifdef CONFIG_SMP |
| |
| static void dummy_smp_setup(void) |
| { |
| } |
| |
| static void dummy_prepare_cpus(unsigned int max_cpus) |
| { |
| } |
| |
| static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point) |
| { |
| } |
| |
| static unsigned int dummy_smp_processor_id(void) |
| { |
| return 0; |
| } |
| |
| static void dummy_send_ipi(unsigned int cpu, unsigned int message) |
| { |
| } |
| |
| static struct plat_smp_ops dummy_smp_ops = { |
| .smp_setup = dummy_smp_setup, |
| .prepare_cpus = dummy_prepare_cpus, |
| .start_cpu = dummy_start_cpu, |
| .smp_processor_id = dummy_smp_processor_id, |
| .send_ipi = dummy_send_ipi, |
| .cpu_die = native_cpu_die, |
| .cpu_disable = native_cpu_disable, |
| .play_dead = native_play_dead, |
| }; |
| |
| extern const struct of_cpu_method __cpu_method_of_table[]; |
| const struct of_cpu_method __cpu_method_of_table_sentinel |
| __section(__cpu_method_of_table_end); |
| |
| static void sh_of_smp_probe(void) |
| { |
| struct device_node *np = 0; |
| const char *method = 0; |
| const struct of_cpu_method *m = __cpu_method_of_table; |
| |
| pr_info("SH generic board support: scanning for cpus\n"); |
| |
| init_cpu_possible(cpumask_of(0)); |
| |
| while ((np = of_find_node_by_type(np, "cpu"))) { |
| const __be32 *cell = of_get_property(np, "reg", NULL); |
| u64 id = -1; |
| if (cell) id = of_read_number(cell, of_n_addr_cells(np)); |
| if (id < NR_CPUS) { |
| if (!method) |
| of_property_read_string(np, "enable-method", &method); |
| set_cpu_possible(id, true); |
| set_cpu_present(id, true); |
| __cpu_number_map[id] = id; |
| __cpu_logical_map[id] = id; |
| } |
| } |
| if (!method) { |
| np = of_find_node_by_name(NULL, "cpus"); |
| of_property_read_string(np, "enable-method", &method); |
| } |
| |
| pr_info("CPU enable method: %s\n", method); |
| if (method) |
| for (; m->method; m++) |
| if (!strcmp(m->method, method)) { |
| register_smp_ops(m->ops); |
| return; |
| } |
| |
| register_smp_ops(&dummy_smp_ops); |
| } |
| |
| #else |
| |
| static void sh_of_smp_probe(void) |
| { |
| } |
| |
| #endif |
| |
| static void noop(void) |
| { |
| } |
| |
| static int noopi(void) |
| { |
| return 0; |
| } |
| |
| static void __init sh_of_mem_reserve(void) |
| { |
| early_init_fdt_reserve_self(); |
| early_init_fdt_scan_reserved_mem(); |
| } |
| |
| static void __init sh_of_time_init(void) |
| { |
| pr_info("SH generic board support: scanning for clocksource devices\n"); |
| timer_probe(); |
| } |
| |
| static void __init sh_of_setup(char **cmdline_p) |
| { |
| struct device_node *root; |
| |
| board_time_init = sh_of_time_init; |
| |
| sh_mv.mv_name = "Unknown SH model"; |
| root = of_find_node_by_path("/"); |
| if (root) { |
| of_property_read_string(root, "model", &sh_mv.mv_name); |
| of_node_put(root); |
| } |
| |
| sh_of_smp_probe(); |
| } |
| |
| static int sh_of_irq_demux(int irq) |
| { |
| /* FIXME: eventually this should not be used at all; |
| * the interrupt controller should set_handle_irq(). */ |
| return irq; |
| } |
| |
| static void __init sh_of_init_irq(void) |
| { |
| pr_info("SH generic board support: scanning for interrupt controllers\n"); |
| irqchip_init(); |
| } |
| |
| static int __init sh_of_clk_init(void) |
| { |
| #ifdef CONFIG_COMMON_CLK |
| /* Disabled pending move to COMMON_CLK framework. */ |
| pr_info("SH generic board support: scanning for clk providers\n"); |
| of_clk_init(NULL); |
| #endif |
| return 0; |
| } |
| |
| static struct sh_machine_vector __initmv sh_of_generic_mv = { |
| .mv_setup = sh_of_setup, |
| .mv_name = "devicetree", /* replaced by DT root's model */ |
| .mv_irq_demux = sh_of_irq_demux, |
| .mv_init_irq = sh_of_init_irq, |
| .mv_clk_init = sh_of_clk_init, |
| .mv_mode_pins = noopi, |
| .mv_mem_init = noop, |
| .mv_mem_reserve = sh_of_mem_reserve, |
| }; |
| |
| struct sh_clk_ops; |
| |
| void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) |
| { |
| } |
| |
| void __init plat_irq_setup(void) |
| { |
| } |