| /* |
| * Procedures for creating, accessing and interpreting the device tree. |
| * |
| * Paul Mackerras August 1996. |
| * Copyright (C) 1996-2005 Paul Mackerras. |
| * |
| * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. |
| * {engebret|bergner}@us.ibm.com |
| * |
| * Adapted for sparc64 by David S. Miller davem@davemloft.net |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/bootmem.h> |
| #include <linux/module.h> |
| |
| #include <asm/prom.h> |
| #include <asm/of_device.h> |
| #include <asm/oplib.h> |
| #include <asm/irq.h> |
| #include <asm/asi.h> |
| #include <asm/upa.h> |
| #include <asm/smp.h> |
| |
| extern struct device_node *allnodes; /* temporary while merging */ |
| |
| extern rwlock_t devtree_lock; /* temporary while merging */ |
| |
| struct device_node *of_find_node_by_phandle(phandle handle) |
| { |
| struct device_node *np; |
| |
| for (np = allnodes; np != 0; np = np->allnext) |
| if (np->node == handle) |
| break; |
| |
| return np; |
| } |
| EXPORT_SYMBOL(of_find_node_by_phandle); |
| |
| int of_getintprop_default(struct device_node *np, const char *name, int def) |
| { |
| struct property *prop; |
| int len; |
| |
| prop = of_find_property(np, name, &len); |
| if (!prop || len != 4) |
| return def; |
| |
| return *(int *) prop->value; |
| } |
| EXPORT_SYMBOL(of_getintprop_default); |
| |
| int of_set_property(struct device_node *dp, const char *name, void *val, int len) |
| { |
| struct property **prevp; |
| void *new_val; |
| int err; |
| |
| new_val = kmalloc(len, GFP_KERNEL); |
| if (!new_val) |
| return -ENOMEM; |
| |
| memcpy(new_val, val, len); |
| |
| err = -ENODEV; |
| |
| write_lock(&devtree_lock); |
| prevp = &dp->properties; |
| while (*prevp) { |
| struct property *prop = *prevp; |
| |
| if (!strcasecmp(prop->name, name)) { |
| void *old_val = prop->value; |
| int ret; |
| |
| ret = prom_setprop(dp->node, name, val, len); |
| err = -EINVAL; |
| if (ret >= 0) { |
| prop->value = new_val; |
| prop->length = len; |
| |
| if (OF_IS_DYNAMIC(prop)) |
| kfree(old_val); |
| |
| OF_MARK_DYNAMIC(prop); |
| |
| err = 0; |
| } |
| break; |
| } |
| prevp = &(*prevp)->next; |
| } |
| write_unlock(&devtree_lock); |
| |
| /* XXX Upate procfs if necessary... */ |
| |
| return err; |
| } |
| EXPORT_SYMBOL(of_set_property); |
| |
| int of_find_in_proplist(const char *list, const char *match, int len) |
| { |
| while (len > 0) { |
| int l; |
| |
| if (!strcmp(list, match)) |
| return 1; |
| l = strlen(list) + 1; |
| list += l; |
| len -= l; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(of_find_in_proplist); |
| |
| static unsigned int prom_early_allocated; |
| |
| static void * __init prom_early_alloc(unsigned long size) |
| { |
| void *ret; |
| |
| ret = __alloc_bootmem(size, SMP_CACHE_BYTES, 0UL); |
| if (ret != NULL) |
| memset(ret, 0, size); |
| |
| prom_early_allocated += size; |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PCI |
| /* PSYCHO interrupt mapping support. */ |
| #define PSYCHO_IMAP_A_SLOT0 0x0c00UL |
| #define PSYCHO_IMAP_B_SLOT0 0x0c20UL |
| static unsigned long psycho_pcislot_imap_offset(unsigned long ino) |
| { |
| unsigned int bus = (ino & 0x10) >> 4; |
| unsigned int slot = (ino & 0x0c) >> 2; |
| |
| if (bus == 0) |
| return PSYCHO_IMAP_A_SLOT0 + (slot * 8); |
| else |
| return PSYCHO_IMAP_B_SLOT0 + (slot * 8); |
| } |
| |
| #define PSYCHO_IMAP_SCSI 0x1000UL |
| #define PSYCHO_IMAP_ETH 0x1008UL |
| #define PSYCHO_IMAP_BPP 0x1010UL |
| #define PSYCHO_IMAP_AU_REC 0x1018UL |
| #define PSYCHO_IMAP_AU_PLAY 0x1020UL |
| #define PSYCHO_IMAP_PFAIL 0x1028UL |
| #define PSYCHO_IMAP_KMS 0x1030UL |
| #define PSYCHO_IMAP_FLPY 0x1038UL |
| #define PSYCHO_IMAP_SHW 0x1040UL |
| #define PSYCHO_IMAP_KBD 0x1048UL |
| #define PSYCHO_IMAP_MS 0x1050UL |
| #define PSYCHO_IMAP_SER 0x1058UL |
| #define PSYCHO_IMAP_TIM0 0x1060UL |
| #define PSYCHO_IMAP_TIM1 0x1068UL |
| #define PSYCHO_IMAP_UE 0x1070UL |
| #define PSYCHO_IMAP_CE 0x1078UL |
| #define PSYCHO_IMAP_A_ERR 0x1080UL |
| #define PSYCHO_IMAP_B_ERR 0x1088UL |
| #define PSYCHO_IMAP_PMGMT 0x1090UL |
| #define PSYCHO_IMAP_GFX 0x1098UL |
| #define PSYCHO_IMAP_EUPA 0x10a0UL |
| |
| static unsigned long __psycho_onboard_imap_off[] = { |
| /*0x20*/ PSYCHO_IMAP_SCSI, |
| /*0x21*/ PSYCHO_IMAP_ETH, |
| /*0x22*/ PSYCHO_IMAP_BPP, |
| /*0x23*/ PSYCHO_IMAP_AU_REC, |
| /*0x24*/ PSYCHO_IMAP_AU_PLAY, |
| /*0x25*/ PSYCHO_IMAP_PFAIL, |
| /*0x26*/ PSYCHO_IMAP_KMS, |
| /*0x27*/ PSYCHO_IMAP_FLPY, |
| /*0x28*/ PSYCHO_IMAP_SHW, |
| /*0x29*/ PSYCHO_IMAP_KBD, |
| /*0x2a*/ PSYCHO_IMAP_MS, |
| /*0x2b*/ PSYCHO_IMAP_SER, |
| /*0x2c*/ PSYCHO_IMAP_TIM0, |
| /*0x2d*/ PSYCHO_IMAP_TIM1, |
| /*0x2e*/ PSYCHO_IMAP_UE, |
| /*0x2f*/ PSYCHO_IMAP_CE, |
| /*0x30*/ PSYCHO_IMAP_A_ERR, |
| /*0x31*/ PSYCHO_IMAP_B_ERR, |
| /*0x32*/ PSYCHO_IMAP_PMGMT, |
| /*0x33*/ PSYCHO_IMAP_GFX, |
| /*0x34*/ PSYCHO_IMAP_EUPA, |
| }; |
| #define PSYCHO_ONBOARD_IRQ_BASE 0x20 |
| #define PSYCHO_ONBOARD_IRQ_LAST 0x34 |
| #define psycho_onboard_imap_offset(__ino) \ |
| __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE] |
| |
| #define PSYCHO_ICLR_A_SLOT0 0x1400UL |
| #define PSYCHO_ICLR_SCSI 0x1800UL |
| |
| #define psycho_iclr_offset(ino) \ |
| ((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \ |
| (PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3))) |
| |
| static unsigned int psycho_irq_build(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| unsigned long controller_regs = (unsigned long) _data; |
| unsigned long imap, iclr; |
| unsigned long imap_off, iclr_off; |
| int inofixup = 0; |
| |
| ino &= 0x3f; |
| if (ino < PSYCHO_ONBOARD_IRQ_BASE) { |
| /* PCI slot */ |
| imap_off = psycho_pcislot_imap_offset(ino); |
| } else { |
| /* Onboard device */ |
| if (ino > PSYCHO_ONBOARD_IRQ_LAST) { |
| prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino); |
| prom_halt(); |
| } |
| imap_off = psycho_onboard_imap_offset(ino); |
| } |
| |
| /* Now build the IRQ bucket. */ |
| imap = controller_regs + imap_off; |
| |
| iclr_off = psycho_iclr_offset(ino); |
| iclr = controller_regs + iclr_off; |
| |
| if ((ino & 0x20) == 0) |
| inofixup = ino & 0x03; |
| |
| return build_irq(inofixup, iclr, imap); |
| } |
| |
| static void __init psycho_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = psycho_irq_build; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = (void *) regs[2].phys_addr; |
| } |
| |
| #define sabre_read(__reg) \ |
| ({ u64 __ret; \ |
| __asm__ __volatile__("ldxa [%1] %2, %0" \ |
| : "=r" (__ret) \ |
| : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \ |
| : "memory"); \ |
| __ret; \ |
| }) |
| |
| struct sabre_irq_data { |
| unsigned long controller_regs; |
| unsigned int pci_first_busno; |
| }; |
| #define SABRE_CONFIGSPACE 0x001000000UL |
| #define SABRE_WRSYNC 0x1c20UL |
| |
| #define SABRE_CONFIG_BASE(CONFIG_SPACE) \ |
| (CONFIG_SPACE | (1UL << 24)) |
| #define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \ |
| (((unsigned long)(BUS) << 16) | \ |
| ((unsigned long)(DEVFN) << 8) | \ |
| ((unsigned long)(REG))) |
| |
| /* When a device lives behind a bridge deeper in the PCI bus topology |
| * than APB, a special sequence must run to make sure all pending DMA |
| * transfers at the time of IRQ delivery are visible in the coherency |
| * domain by the cpu. This sequence is to perform a read on the far |
| * side of the non-APB bridge, then perform a read of Sabre's DMA |
| * write-sync register. |
| */ |
| static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2) |
| { |
| unsigned int phys_hi = (unsigned int) (unsigned long) _arg1; |
| struct sabre_irq_data *irq_data = _arg2; |
| unsigned long controller_regs = irq_data->controller_regs; |
| unsigned long sync_reg = controller_regs + SABRE_WRSYNC; |
| unsigned long config_space = controller_regs + SABRE_CONFIGSPACE; |
| unsigned int bus, devfn; |
| u16 _unused; |
| |
| config_space = SABRE_CONFIG_BASE(config_space); |
| |
| bus = (phys_hi >> 16) & 0xff; |
| devfn = (phys_hi >> 8) & 0xff; |
| |
| config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00); |
| |
| __asm__ __volatile__("membar #Sync\n\t" |
| "lduha [%1] %2, %0\n\t" |
| "membar #Sync" |
| : "=r" (_unused) |
| : "r" ((u16 *) config_space), |
| "i" (ASI_PHYS_BYPASS_EC_E_L) |
| : "memory"); |
| |
| sabre_read(sync_reg); |
| } |
| |
| #define SABRE_IMAP_A_SLOT0 0x0c00UL |
| #define SABRE_IMAP_B_SLOT0 0x0c20UL |
| #define SABRE_IMAP_SCSI 0x1000UL |
| #define SABRE_IMAP_ETH 0x1008UL |
| #define SABRE_IMAP_BPP 0x1010UL |
| #define SABRE_IMAP_AU_REC 0x1018UL |
| #define SABRE_IMAP_AU_PLAY 0x1020UL |
| #define SABRE_IMAP_PFAIL 0x1028UL |
| #define SABRE_IMAP_KMS 0x1030UL |
| #define SABRE_IMAP_FLPY 0x1038UL |
| #define SABRE_IMAP_SHW 0x1040UL |
| #define SABRE_IMAP_KBD 0x1048UL |
| #define SABRE_IMAP_MS 0x1050UL |
| #define SABRE_IMAP_SER 0x1058UL |
| #define SABRE_IMAP_UE 0x1070UL |
| #define SABRE_IMAP_CE 0x1078UL |
| #define SABRE_IMAP_PCIERR 0x1080UL |
| #define SABRE_IMAP_GFX 0x1098UL |
| #define SABRE_IMAP_EUPA 0x10a0UL |
| #define SABRE_ICLR_A_SLOT0 0x1400UL |
| #define SABRE_ICLR_B_SLOT0 0x1480UL |
| #define SABRE_ICLR_SCSI 0x1800UL |
| #define SABRE_ICLR_ETH 0x1808UL |
| #define SABRE_ICLR_BPP 0x1810UL |
| #define SABRE_ICLR_AU_REC 0x1818UL |
| #define SABRE_ICLR_AU_PLAY 0x1820UL |
| #define SABRE_ICLR_PFAIL 0x1828UL |
| #define SABRE_ICLR_KMS 0x1830UL |
| #define SABRE_ICLR_FLPY 0x1838UL |
| #define SABRE_ICLR_SHW 0x1840UL |
| #define SABRE_ICLR_KBD 0x1848UL |
| #define SABRE_ICLR_MS 0x1850UL |
| #define SABRE_ICLR_SER 0x1858UL |
| #define SABRE_ICLR_UE 0x1870UL |
| #define SABRE_ICLR_CE 0x1878UL |
| #define SABRE_ICLR_PCIERR 0x1880UL |
| |
| static unsigned long sabre_pcislot_imap_offset(unsigned long ino) |
| { |
| unsigned int bus = (ino & 0x10) >> 4; |
| unsigned int slot = (ino & 0x0c) >> 2; |
| |
| if (bus == 0) |
| return SABRE_IMAP_A_SLOT0 + (slot * 8); |
| else |
| return SABRE_IMAP_B_SLOT0 + (slot * 8); |
| } |
| |
| static unsigned long __sabre_onboard_imap_off[] = { |
| /*0x20*/ SABRE_IMAP_SCSI, |
| /*0x21*/ SABRE_IMAP_ETH, |
| /*0x22*/ SABRE_IMAP_BPP, |
| /*0x23*/ SABRE_IMAP_AU_REC, |
| /*0x24*/ SABRE_IMAP_AU_PLAY, |
| /*0x25*/ SABRE_IMAP_PFAIL, |
| /*0x26*/ SABRE_IMAP_KMS, |
| /*0x27*/ SABRE_IMAP_FLPY, |
| /*0x28*/ SABRE_IMAP_SHW, |
| /*0x29*/ SABRE_IMAP_KBD, |
| /*0x2a*/ SABRE_IMAP_MS, |
| /*0x2b*/ SABRE_IMAP_SER, |
| /*0x2c*/ 0 /* reserved */, |
| /*0x2d*/ 0 /* reserved */, |
| /*0x2e*/ SABRE_IMAP_UE, |
| /*0x2f*/ SABRE_IMAP_CE, |
| /*0x30*/ SABRE_IMAP_PCIERR, |
| /*0x31*/ 0 /* reserved */, |
| /*0x32*/ 0 /* reserved */, |
| /*0x33*/ SABRE_IMAP_GFX, |
| /*0x34*/ SABRE_IMAP_EUPA, |
| }; |
| #define SABRE_ONBOARD_IRQ_BASE 0x20 |
| #define SABRE_ONBOARD_IRQ_LAST 0x30 |
| #define sabre_onboard_imap_offset(__ino) \ |
| __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE] |
| |
| #define sabre_iclr_offset(ino) \ |
| ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \ |
| (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3))) |
| |
| static int sabre_device_needs_wsync(struct device_node *dp) |
| { |
| struct device_node *parent = dp->parent; |
| const char *parent_model, *parent_compat; |
| |
| /* This traversal up towards the root is meant to |
| * handle two cases: |
| * |
| * 1) non-PCI bus sitting under PCI, such as 'ebus' |
| * 2) the PCI controller interrupts themselves, which |
| * will use the sabre_irq_build but do not need |
| * the DMA synchronization handling |
| */ |
| while (parent) { |
| if (!strcmp(parent->type, "pci")) |
| break; |
| parent = parent->parent; |
| } |
| |
| if (!parent) |
| return 0; |
| |
| parent_model = of_get_property(parent, |
| "model", NULL); |
| if (parent_model && |
| (!strcmp(parent_model, "SUNW,sabre") || |
| !strcmp(parent_model, "SUNW,simba"))) |
| return 0; |
| |
| parent_compat = of_get_property(parent, |
| "compatible", NULL); |
| if (parent_compat && |
| (!strcmp(parent_compat, "pci108e,a000") || |
| !strcmp(parent_compat, "pci108e,a001"))) |
| return 0; |
| |
| return 1; |
| } |
| |
| static unsigned int sabre_irq_build(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| struct sabre_irq_data *irq_data = _data; |
| unsigned long controller_regs = irq_data->controller_regs; |
| const struct linux_prom_pci_registers *regs; |
| unsigned long imap, iclr; |
| unsigned long imap_off, iclr_off; |
| int inofixup = 0; |
| int virt_irq; |
| |
| ino &= 0x3f; |
| if (ino < SABRE_ONBOARD_IRQ_BASE) { |
| /* PCI slot */ |
| imap_off = sabre_pcislot_imap_offset(ino); |
| } else { |
| /* onboard device */ |
| if (ino > SABRE_ONBOARD_IRQ_LAST) { |
| prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino); |
| prom_halt(); |
| } |
| imap_off = sabre_onboard_imap_offset(ino); |
| } |
| |
| /* Now build the IRQ bucket. */ |
| imap = controller_regs + imap_off; |
| |
| iclr_off = sabre_iclr_offset(ino); |
| iclr = controller_regs + iclr_off; |
| |
| if ((ino & 0x20) == 0) |
| inofixup = ino & 0x03; |
| |
| virt_irq = build_irq(inofixup, iclr, imap); |
| |
| /* If the parent device is a PCI<->PCI bridge other than |
| * APB, we have to install a pre-handler to ensure that |
| * all pending DMA is drained before the interrupt handler |
| * is run. |
| */ |
| regs = of_get_property(dp, "reg", NULL); |
| if (regs && sabre_device_needs_wsync(dp)) { |
| irq_install_pre_handler(virt_irq, |
| sabre_wsync_handler, |
| (void *) (long) regs->phys_hi, |
| (void *) irq_data); |
| } |
| |
| return virt_irq; |
| } |
| |
| static void __init sabre_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| struct sabre_irq_data *irq_data; |
| const u32 *busrange; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = sabre_irq_build; |
| |
| irq_data = prom_early_alloc(sizeof(struct sabre_irq_data)); |
| |
| regs = of_get_property(dp, "reg", NULL); |
| irq_data->controller_regs = regs[0].phys_addr; |
| |
| busrange = of_get_property(dp, "bus-range", NULL); |
| irq_data->pci_first_busno = busrange[0]; |
| |
| dp->irq_trans->data = irq_data; |
| } |
| |
| /* SCHIZO interrupt mapping support. Unlike Psycho, for this controller the |
| * imap/iclr registers are per-PBM. |
| */ |
| #define SCHIZO_IMAP_BASE 0x1000UL |
| #define SCHIZO_ICLR_BASE 0x1400UL |
| |
| static unsigned long schizo_imap_offset(unsigned long ino) |
| { |
| return SCHIZO_IMAP_BASE + (ino * 8UL); |
| } |
| |
| static unsigned long schizo_iclr_offset(unsigned long ino) |
| { |
| return SCHIZO_ICLR_BASE + (ino * 8UL); |
| } |
| |
| static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs, |
| unsigned int ino) |
| { |
| |
| return pbm_regs + schizo_iclr_offset(ino); |
| } |
| |
| static unsigned long schizo_ino_to_imap(unsigned long pbm_regs, |
| unsigned int ino) |
| { |
| return pbm_regs + schizo_imap_offset(ino); |
| } |
| |
| #define schizo_read(__reg) \ |
| ({ u64 __ret; \ |
| __asm__ __volatile__("ldxa [%1] %2, %0" \ |
| : "=r" (__ret) \ |
| : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \ |
| : "memory"); \ |
| __ret; \ |
| }) |
| #define schizo_write(__reg, __val) \ |
| __asm__ __volatile__("stxa %0, [%1] %2" \ |
| : /* no outputs */ \ |
| : "r" (__val), "r" (__reg), \ |
| "i" (ASI_PHYS_BYPASS_EC_E) \ |
| : "memory") |
| |
| static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2) |
| { |
| unsigned long sync_reg = (unsigned long) _arg2; |
| u64 mask = 1UL << (ino & IMAP_INO); |
| u64 val; |
| int limit; |
| |
| schizo_write(sync_reg, mask); |
| |
| limit = 100000; |
| val = 0; |
| while (--limit) { |
| val = schizo_read(sync_reg); |
| if (!(val & mask)) |
| break; |
| } |
| if (limit <= 0) { |
| printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n", |
| val, mask); |
| } |
| |
| if (_arg1) { |
| static unsigned char cacheline[64] |
| __attribute__ ((aligned (64))); |
| |
| __asm__ __volatile__("rd %%fprs, %0\n\t" |
| "or %0, %4, %1\n\t" |
| "wr %1, 0x0, %%fprs\n\t" |
| "stda %%f0, [%5] %6\n\t" |
| "wr %0, 0x0, %%fprs\n\t" |
| "membar #Sync" |
| : "=&r" (mask), "=&r" (val) |
| : "0" (mask), "1" (val), |
| "i" (FPRS_FEF), "r" (&cacheline[0]), |
| "i" (ASI_BLK_COMMIT_P)); |
| } |
| } |
| |
| struct schizo_irq_data { |
| unsigned long pbm_regs; |
| unsigned long sync_reg; |
| u32 portid; |
| int chip_version; |
| }; |
| |
| static unsigned int schizo_irq_build(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| struct schizo_irq_data *irq_data = _data; |
| unsigned long pbm_regs = irq_data->pbm_regs; |
| unsigned long imap, iclr; |
| int ign_fixup; |
| int virt_irq; |
| int is_tomatillo; |
| |
| ino &= 0x3f; |
| |
| /* Now build the IRQ bucket. */ |
| imap = schizo_ino_to_imap(pbm_regs, ino); |
| iclr = schizo_ino_to_iclr(pbm_regs, ino); |
| |
| /* On Schizo, no inofixup occurs. This is because each |
| * INO has it's own IMAP register. On Psycho and Sabre |
| * there is only one IMAP register for each PCI slot even |
| * though four different INOs can be generated by each |
| * PCI slot. |
| * |
| * But, for JBUS variants (essentially, Tomatillo), we have |
| * to fixup the lowest bit of the interrupt group number. |
| */ |
| ign_fixup = 0; |
| |
| is_tomatillo = (irq_data->sync_reg != 0UL); |
| |
| if (is_tomatillo) { |
| if (irq_data->portid & 1) |
| ign_fixup = (1 << 6); |
| } |
| |
| virt_irq = build_irq(ign_fixup, iclr, imap); |
| |
| if (is_tomatillo) { |
| irq_install_pre_handler(virt_irq, |
| tomatillo_wsync_handler, |
| ((irq_data->chip_version <= 4) ? |
| (void *) 1 : (void *) 0), |
| (void *) irq_data->sync_reg); |
| } |
| |
| return virt_irq; |
| } |
| |
| static void __init __schizo_irq_trans_init(struct device_node *dp, |
| int is_tomatillo) |
| { |
| const struct linux_prom64_registers *regs; |
| struct schizo_irq_data *irq_data; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = schizo_irq_build; |
| |
| irq_data = prom_early_alloc(sizeof(struct schizo_irq_data)); |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = irq_data; |
| |
| irq_data->pbm_regs = regs[0].phys_addr; |
| if (is_tomatillo) |
| irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL; |
| else |
| irq_data->sync_reg = 0UL; |
| irq_data->portid = of_getintprop_default(dp, "portid", 0); |
| irq_data->chip_version = of_getintprop_default(dp, "version#", 0); |
| } |
| |
| static void __init schizo_irq_trans_init(struct device_node *dp) |
| { |
| __schizo_irq_trans_init(dp, 0); |
| } |
| |
| static void __init tomatillo_irq_trans_init(struct device_node *dp) |
| { |
| __schizo_irq_trans_init(dp, 1); |
| } |
| |
| static unsigned int pci_sun4v_irq_build(struct device_node *dp, |
| unsigned int devino, |
| void *_data) |
| { |
| u32 devhandle = (u32) (unsigned long) _data; |
| |
| return sun4v_build_irq(devhandle, devino); |
| } |
| |
| static void __init pci_sun4v_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = pci_sun4v_irq_build; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = (void *) (unsigned long) |
| ((regs->phys_addr >> 32UL) & 0x0fffffff); |
| } |
| |
| struct fire_irq_data { |
| unsigned long pbm_regs; |
| u32 portid; |
| }; |
| |
| #define FIRE_IMAP_BASE 0x001000 |
| #define FIRE_ICLR_BASE 0x001400 |
| |
| static unsigned long fire_imap_offset(unsigned long ino) |
| { |
| return FIRE_IMAP_BASE + (ino * 8UL); |
| } |
| |
| static unsigned long fire_iclr_offset(unsigned long ino) |
| { |
| return FIRE_ICLR_BASE + (ino * 8UL); |
| } |
| |
| static unsigned long fire_ino_to_iclr(unsigned long pbm_regs, |
| unsigned int ino) |
| { |
| return pbm_regs + fire_iclr_offset(ino); |
| } |
| |
| static unsigned long fire_ino_to_imap(unsigned long pbm_regs, |
| unsigned int ino) |
| { |
| return pbm_regs + fire_imap_offset(ino); |
| } |
| |
| static unsigned int fire_irq_build(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| struct fire_irq_data *irq_data = _data; |
| unsigned long pbm_regs = irq_data->pbm_regs; |
| unsigned long imap, iclr; |
| unsigned long int_ctrlr; |
| |
| ino &= 0x3f; |
| |
| /* Now build the IRQ bucket. */ |
| imap = fire_ino_to_imap(pbm_regs, ino); |
| iclr = fire_ino_to_iclr(pbm_regs, ino); |
| |
| /* Set the interrupt controller number. */ |
| int_ctrlr = 1 << 6; |
| upa_writeq(int_ctrlr, imap); |
| |
| /* The interrupt map registers do not have an INO field |
| * like other chips do. They return zero in the INO |
| * field, and the interrupt controller number is controlled |
| * in bits 6 to 9. So in order for build_irq() to get |
| * the INO right we pass it in as part of the fixup |
| * which will get added to the map register zero value |
| * read by build_irq(). |
| */ |
| ino |= (irq_data->portid << 6); |
| ino -= int_ctrlr; |
| return build_irq(ino, iclr, imap); |
| } |
| |
| static void __init fire_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| struct fire_irq_data *irq_data; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = fire_irq_build; |
| |
| irq_data = prom_early_alloc(sizeof(struct fire_irq_data)); |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = irq_data; |
| |
| irq_data->pbm_regs = regs[0].phys_addr; |
| irq_data->portid = of_getintprop_default(dp, "portid", 0); |
| } |
| #endif /* CONFIG_PCI */ |
| |
| #ifdef CONFIG_SBUS |
| /* INO number to IMAP register offset for SYSIO external IRQ's. |
| * This should conform to both Sunfire/Wildfire server and Fusion |
| * desktop designs. |
| */ |
| #define SYSIO_IMAP_SLOT0 0x2c00UL |
| #define SYSIO_IMAP_SLOT1 0x2c08UL |
| #define SYSIO_IMAP_SLOT2 0x2c10UL |
| #define SYSIO_IMAP_SLOT3 0x2c18UL |
| #define SYSIO_IMAP_SCSI 0x3000UL |
| #define SYSIO_IMAP_ETH 0x3008UL |
| #define SYSIO_IMAP_BPP 0x3010UL |
| #define SYSIO_IMAP_AUDIO 0x3018UL |
| #define SYSIO_IMAP_PFAIL 0x3020UL |
| #define SYSIO_IMAP_KMS 0x3028UL |
| #define SYSIO_IMAP_FLPY 0x3030UL |
| #define SYSIO_IMAP_SHW 0x3038UL |
| #define SYSIO_IMAP_KBD 0x3040UL |
| #define SYSIO_IMAP_MS 0x3048UL |
| #define SYSIO_IMAP_SER 0x3050UL |
| #define SYSIO_IMAP_TIM0 0x3060UL |
| #define SYSIO_IMAP_TIM1 0x3068UL |
| #define SYSIO_IMAP_UE 0x3070UL |
| #define SYSIO_IMAP_CE 0x3078UL |
| #define SYSIO_IMAP_SBERR 0x3080UL |
| #define SYSIO_IMAP_PMGMT 0x3088UL |
| #define SYSIO_IMAP_GFX 0x3090UL |
| #define SYSIO_IMAP_EUPA 0x3098UL |
| |
| #define bogon ((unsigned long) -1) |
| static unsigned long sysio_irq_offsets[] = { |
| /* SBUS Slot 0 --> 3, level 1 --> 7 */ |
| SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, |
| SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, |
| SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, |
| SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, |
| SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, |
| SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, |
| SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, |
| SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, |
| |
| /* Onboard devices (not relevant/used on SunFire). */ |
| SYSIO_IMAP_SCSI, |
| SYSIO_IMAP_ETH, |
| SYSIO_IMAP_BPP, |
| bogon, |
| SYSIO_IMAP_AUDIO, |
| SYSIO_IMAP_PFAIL, |
| bogon, |
| bogon, |
| SYSIO_IMAP_KMS, |
| SYSIO_IMAP_FLPY, |
| SYSIO_IMAP_SHW, |
| SYSIO_IMAP_KBD, |
| SYSIO_IMAP_MS, |
| SYSIO_IMAP_SER, |
| bogon, |
| bogon, |
| SYSIO_IMAP_TIM0, |
| SYSIO_IMAP_TIM1, |
| bogon, |
| bogon, |
| SYSIO_IMAP_UE, |
| SYSIO_IMAP_CE, |
| SYSIO_IMAP_SBERR, |
| SYSIO_IMAP_PMGMT, |
| SYSIO_IMAP_GFX, |
| SYSIO_IMAP_EUPA, |
| }; |
| |
| #undef bogon |
| |
| #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) |
| |
| /* Convert Interrupt Mapping register pointer to associated |
| * Interrupt Clear register pointer, SYSIO specific version. |
| */ |
| #define SYSIO_ICLR_UNUSED0 0x3400UL |
| #define SYSIO_ICLR_SLOT0 0x3408UL |
| #define SYSIO_ICLR_SLOT1 0x3448UL |
| #define SYSIO_ICLR_SLOT2 0x3488UL |
| #define SYSIO_ICLR_SLOT3 0x34c8UL |
| static unsigned long sysio_imap_to_iclr(unsigned long imap) |
| { |
| unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; |
| return imap + diff; |
| } |
| |
| static unsigned int sbus_of_build_irq(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| unsigned long reg_base = (unsigned long) _data; |
| const struct linux_prom_registers *regs; |
| unsigned long imap, iclr; |
| int sbus_slot = 0; |
| int sbus_level = 0; |
| |
| ino &= 0x3f; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| if (regs) |
| sbus_slot = regs->which_io; |
| |
| if (ino < 0x20) |
| ino += (sbus_slot * 8); |
| |
| imap = sysio_irq_offsets[ino]; |
| if (imap == ((unsigned long)-1)) { |
| prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n", |
| ino); |
| prom_halt(); |
| } |
| imap += reg_base; |
| |
| /* SYSIO inconsistency. For external SLOTS, we have to select |
| * the right ICLR register based upon the lower SBUS irq level |
| * bits. |
| */ |
| if (ino >= 0x20) { |
| iclr = sysio_imap_to_iclr(imap); |
| } else { |
| sbus_level = ino & 0x7; |
| |
| switch(sbus_slot) { |
| case 0: |
| iclr = reg_base + SYSIO_ICLR_SLOT0; |
| break; |
| case 1: |
| iclr = reg_base + SYSIO_ICLR_SLOT1; |
| break; |
| case 2: |
| iclr = reg_base + SYSIO_ICLR_SLOT2; |
| break; |
| default: |
| case 3: |
| iclr = reg_base + SYSIO_ICLR_SLOT3; |
| break; |
| }; |
| |
| iclr += ((unsigned long)sbus_level - 1UL) * 8UL; |
| } |
| return build_irq(sbus_level, iclr, imap); |
| } |
| |
| static void __init sbus_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = sbus_of_build_irq; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr; |
| } |
| #endif /* CONFIG_SBUS */ |
| |
| |
| static unsigned int central_build_irq(struct device_node *dp, |
| unsigned int ino, |
| void *_data) |
| { |
| struct device_node *central_dp = _data; |
| struct of_device *central_op = of_find_device_by_node(central_dp); |
| struct resource *res; |
| unsigned long imap, iclr; |
| u32 tmp; |
| |
| if (!strcmp(dp->name, "eeprom")) { |
| res = ¢ral_op->resource[5]; |
| } else if (!strcmp(dp->name, "zs")) { |
| res = ¢ral_op->resource[4]; |
| } else if (!strcmp(dp->name, "clock-board")) { |
| res = ¢ral_op->resource[3]; |
| } else { |
| return ino; |
| } |
| |
| imap = res->start + 0x00UL; |
| iclr = res->start + 0x10UL; |
| |
| /* Set the INO state to idle, and disable. */ |
| upa_writel(0, iclr); |
| upa_readl(iclr); |
| |
| tmp = upa_readl(imap); |
| tmp &= ~0x80000000; |
| upa_writel(tmp, imap); |
| |
| return build_irq(0, iclr, imap); |
| } |
| |
| static void __init central_irq_trans_init(struct device_node *dp) |
| { |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = central_build_irq; |
| |
| dp->irq_trans->data = dp; |
| } |
| |
| struct irq_trans { |
| const char *name; |
| void (*init)(struct device_node *); |
| }; |
| |
| #ifdef CONFIG_PCI |
| static struct irq_trans __initdata pci_irq_trans_table[] = { |
| { "SUNW,sabre", sabre_irq_trans_init }, |
| { "pci108e,a000", sabre_irq_trans_init }, |
| { "pci108e,a001", sabre_irq_trans_init }, |
| { "SUNW,psycho", psycho_irq_trans_init }, |
| { "pci108e,8000", psycho_irq_trans_init }, |
| { "SUNW,schizo", schizo_irq_trans_init }, |
| { "pci108e,8001", schizo_irq_trans_init }, |
| { "SUNW,schizo+", schizo_irq_trans_init }, |
| { "pci108e,8002", schizo_irq_trans_init }, |
| { "SUNW,tomatillo", tomatillo_irq_trans_init }, |
| { "pci108e,a801", tomatillo_irq_trans_init }, |
| { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init }, |
| { "pciex108e,80f0", fire_irq_trans_init }, |
| }; |
| #endif |
| |
| static unsigned int sun4v_vdev_irq_build(struct device_node *dp, |
| unsigned int devino, |
| void *_data) |
| { |
| u32 devhandle = (u32) (unsigned long) _data; |
| |
| return sun4v_build_irq(devhandle, devino); |
| } |
| |
| static void __init sun4v_vdev_irq_trans_init(struct device_node *dp) |
| { |
| const struct linux_prom64_registers *regs; |
| |
| dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); |
| dp->irq_trans->irq_build = sun4v_vdev_irq_build; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| dp->irq_trans->data = (void *) (unsigned long) |
| ((regs->phys_addr >> 32UL) & 0x0fffffff); |
| } |
| |
| static void __init irq_trans_init(struct device_node *dp) |
| { |
| #ifdef CONFIG_PCI |
| const char *model; |
| int i; |
| #endif |
| |
| #ifdef CONFIG_PCI |
| model = of_get_property(dp, "model", NULL); |
| if (!model) |
| model = of_get_property(dp, "compatible", NULL); |
| if (model) { |
| for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) { |
| struct irq_trans *t = &pci_irq_trans_table[i]; |
| |
| if (!strcmp(model, t->name)) |
| return t->init(dp); |
| } |
| } |
| #endif |
| #ifdef CONFIG_SBUS |
| if (!strcmp(dp->name, "sbus") || |
| !strcmp(dp->name, "sbi")) |
| return sbus_irq_trans_init(dp); |
| #endif |
| if (!strcmp(dp->name, "fhc") && |
| !strcmp(dp->parent->name, "central")) |
| return central_irq_trans_init(dp); |
| if (!strcmp(dp->name, "virtual-devices") || |
| !strcmp(dp->name, "niu")) |
| return sun4v_vdev_irq_trans_init(dp); |
| } |
| |
| static int is_root_node(const struct device_node *dp) |
| { |
| if (!dp) |
| return 0; |
| |
| return (dp->parent == NULL); |
| } |
| |
| /* The following routines deal with the black magic of fully naming a |
| * node. |
| * |
| * Certain well known named nodes are just the simple name string. |
| * |
| * Actual devices have an address specifier appended to the base name |
| * string, like this "foo@addr". The "addr" can be in any number of |
| * formats, and the platform plus the type of the node determine the |
| * format and how it is constructed. |
| * |
| * For children of the ROOT node, the naming convention is fixed and |
| * determined by whether this is a sun4u or sun4v system. |
| * |
| * For children of other nodes, it is bus type specific. So |
| * we walk up the tree until we discover a "device_type" property |
| * we recognize and we go from there. |
| * |
| * As an example, the boot device on my workstation has a full path: |
| * |
| * /pci@1e,600000/ide@d/disk@0,0:c |
| */ |
| static void __init sun4v_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom64_registers *regs; |
| struct property *rprop; |
| u32 high_bits, low_bits, type; |
| |
| rprop = of_find_property(dp, "reg", NULL); |
| if (!rprop) |
| return; |
| |
| regs = rprop->value; |
| if (!is_root_node(dp->parent)) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| return; |
| } |
| |
| type = regs->phys_addr >> 60UL; |
| high_bits = (regs->phys_addr >> 32UL) & 0x0fffffffUL; |
| low_bits = (regs->phys_addr & 0xffffffffUL); |
| |
| if (type == 0 || type == 8) { |
| const char *prefix = (type == 0) ? "m" : "i"; |
| |
| if (low_bits) |
| sprintf(tmp_buf, "%s@%s%x,%x", |
| dp->name, prefix, |
| high_bits, low_bits); |
| else |
| sprintf(tmp_buf, "%s@%s%x", |
| dp->name, |
| prefix, |
| high_bits); |
| } else if (type == 12) { |
| sprintf(tmp_buf, "%s@%x", |
| dp->name, high_bits); |
| } |
| } |
| |
| static void __init sun4u_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| if (!is_root_node(dp->parent)) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| return; |
| } |
| |
| prop = of_find_property(dp, "upa-portid", NULL); |
| if (!prop) |
| prop = of_find_property(dp, "portid", NULL); |
| if (prop) { |
| unsigned long mask = 0xffffffffUL; |
| |
| if (tlb_type >= cheetah) |
| mask = 0x7fffff; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| *(u32 *)prop->value, |
| (unsigned int) (regs->phys_addr & mask)); |
| } |
| } |
| |
| /* "name@slot,offset" */ |
| static void __init sbus_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| regs->which_io, |
| regs->phys_addr); |
| } |
| |
| /* "name@devnum[,func]" */ |
| static void __init pci_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom_pci_registers *regs; |
| struct property *prop; |
| unsigned int devfn; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| devfn = (regs->phys_hi >> 8) & 0xff; |
| if (devfn & 0x07) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| devfn >> 3, |
| devfn & 0x07); |
| } else { |
| sprintf(tmp_buf, "%s@%x", |
| dp->name, |
| devfn >> 3); |
| } |
| } |
| |
| /* "name@UPA_PORTID,offset" */ |
| static void __init upa_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| prop = of_find_property(dp, "upa-portid", NULL); |
| if (!prop) |
| return; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| *(u32 *) prop->value, |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| } |
| |
| /* "name@reg" */ |
| static void __init vdev_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| sprintf(tmp_buf, "%s@%x", dp->name, *regs); |
| } |
| |
| /* "name@addrhi,addrlo" */ |
| static void __init ebus_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| } |
| |
| /* "name@bus,addr" */ |
| static void __init i2c_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| /* This actually isn't right... should look at the #address-cells |
| * property of the i2c bus node etc. etc. |
| */ |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, regs[0], regs[1]); |
| } |
| |
| /* "name@reg0[,reg1]" */ |
| static void __init usb_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| if (prop->length == sizeof(u32) || regs[1] == 1) { |
| sprintf(tmp_buf, "%s@%x", |
| dp->name, regs[0]); |
| } else { |
| sprintf(tmp_buf, "%s@%x,%x", |
| dp->name, regs[0], regs[1]); |
| } |
| } |
| |
| /* "name@reg0reg1[,reg2reg3]" */ |
| static void __init ieee1394_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| if (regs[2] || regs[3]) { |
| sprintf(tmp_buf, "%s@%08x%08x,%04x%08x", |
| dp->name, regs[0], regs[1], regs[2], regs[3]); |
| } else { |
| sprintf(tmp_buf, "%s@%08x%08x", |
| dp->name, regs[0], regs[1]); |
| } |
| } |
| |
| static void __init __build_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct device_node *parent = dp->parent; |
| |
| if (parent != NULL) { |
| if (!strcmp(parent->type, "pci") || |
| !strcmp(parent->type, "pciex")) |
| return pci_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "sbus")) |
| return sbus_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "upa")) |
| return upa_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "ebus")) |
| return ebus_path_component(dp, tmp_buf); |
| if (!strcmp(parent->name, "usb") || |
| !strcmp(parent->name, "hub")) |
| return usb_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "i2c")) |
| return i2c_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "firewire")) |
| return ieee1394_path_component(dp, tmp_buf); |
| if (!strcmp(parent->type, "virtual-devices")) |
| return vdev_path_component(dp, tmp_buf); |
| |
| /* "isa" is handled with platform naming */ |
| } |
| |
| /* Use platform naming convention. */ |
| if (tlb_type == hypervisor) |
| return sun4v_path_component(dp, tmp_buf); |
| else |
| return sun4u_path_component(dp, tmp_buf); |
| } |
| |
| static char * __init build_path_component(struct device_node *dp) |
| { |
| char tmp_buf[64], *n; |
| |
| tmp_buf[0] = '\0'; |
| __build_path_component(dp, tmp_buf); |
| if (tmp_buf[0] == '\0') |
| strcpy(tmp_buf, dp->name); |
| |
| n = prom_early_alloc(strlen(tmp_buf) + 1); |
| strcpy(n, tmp_buf); |
| |
| return n; |
| } |
| |
| static char * __init build_full_name(struct device_node *dp) |
| { |
| int len, ourlen, plen; |
| char *n; |
| |
| plen = strlen(dp->parent->full_name); |
| ourlen = strlen(dp->path_component_name); |
| len = ourlen + plen + 2; |
| |
| n = prom_early_alloc(len); |
| strcpy(n, dp->parent->full_name); |
| if (!is_root_node(dp->parent)) { |
| strcpy(n + plen, "/"); |
| plen++; |
| } |
| strcpy(n + plen, dp->path_component_name); |
| |
| return n; |
| } |
| |
| static unsigned int unique_id; |
| |
| static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len) |
| { |
| static struct property *tmp = NULL; |
| struct property *p; |
| |
| if (tmp) { |
| p = tmp; |
| memset(p, 0, sizeof(*p) + 32); |
| tmp = NULL; |
| } else { |
| p = prom_early_alloc(sizeof(struct property) + 32); |
| p->unique_id = unique_id++; |
| } |
| |
| p->name = (char *) (p + 1); |
| if (special_name) { |
| strcpy(p->name, special_name); |
| p->length = special_len; |
| p->value = prom_early_alloc(special_len); |
| memcpy(p->value, special_val, special_len); |
| } else { |
| if (prev == NULL) { |
| prom_firstprop(node, p->name); |
| } else { |
| prom_nextprop(node, prev, p->name); |
| } |
| if (strlen(p->name) == 0) { |
| tmp = p; |
| return NULL; |
| } |
| p->length = prom_getproplen(node, p->name); |
| if (p->length <= 0) { |
| p->length = 0; |
| } else { |
| p->value = prom_early_alloc(p->length + 1); |
| prom_getproperty(node, p->name, p->value, p->length); |
| ((unsigned char *)p->value)[p->length] = '\0'; |
| } |
| } |
| return p; |
| } |
| |
| static struct property * __init build_prop_list(phandle node) |
| { |
| struct property *head, *tail; |
| |
| head = tail = build_one_prop(node, NULL, |
| ".node", &node, sizeof(node)); |
| |
| tail->next = build_one_prop(node, NULL, NULL, NULL, 0); |
| tail = tail->next; |
| while(tail) { |
| tail->next = build_one_prop(node, tail->name, |
| NULL, NULL, 0); |
| tail = tail->next; |
| } |
| |
| return head; |
| } |
| |
| static char * __init get_one_property(phandle node, const char *name) |
| { |
| char *buf = "<NULL>"; |
| int len; |
| |
| len = prom_getproplen(node, name); |
| if (len > 0) { |
| buf = prom_early_alloc(len); |
| prom_getproperty(node, name, buf, len); |
| } |
| |
| return buf; |
| } |
| |
| static struct device_node * __init create_node(phandle node, struct device_node *parent) |
| { |
| struct device_node *dp; |
| |
| if (!node) |
| return NULL; |
| |
| dp = prom_early_alloc(sizeof(*dp)); |
| dp->unique_id = unique_id++; |
| dp->parent = parent; |
| |
| kref_init(&dp->kref); |
| |
| dp->name = get_one_property(node, "name"); |
| dp->type = get_one_property(node, "device_type"); |
| dp->node = node; |
| |
| dp->properties = build_prop_list(node); |
| |
| irq_trans_init(dp); |
| |
| return dp; |
| } |
| |
| static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp) |
| { |
| struct device_node *ret = NULL, *prev_sibling = NULL; |
| struct device_node *dp; |
| |
| while (1) { |
| dp = create_node(node, parent); |
| if (!dp) |
| break; |
| |
| if (prev_sibling) |
| prev_sibling->sibling = dp; |
| |
| if (!ret) |
| ret = dp; |
| prev_sibling = dp; |
| |
| *(*nextp) = dp; |
| *nextp = &dp->allnext; |
| |
| dp->path_component_name = build_path_component(dp); |
| dp->full_name = build_full_name(dp); |
| |
| dp->child = build_tree(dp, prom_getchild(node), nextp); |
| |
| node = prom_getsibling(node); |
| } |
| |
| return ret; |
| } |
| |
| static const char *get_mid_prop(void) |
| { |
| return (tlb_type == spitfire ? "upa-portid" : "portid"); |
| } |
| |
| struct device_node *of_find_node_by_cpuid(int cpuid) |
| { |
| struct device_node *dp; |
| const char *mid_prop = get_mid_prop(); |
| |
| for_each_node_by_type(dp, "cpu") { |
| int id = of_getintprop_default(dp, mid_prop, -1); |
| const char *this_mid_prop = mid_prop; |
| |
| if (id < 0) { |
| this_mid_prop = "cpuid"; |
| id = of_getintprop_default(dp, this_mid_prop, -1); |
| } |
| |
| if (id < 0) { |
| prom_printf("OF: Serious problem, cpu lacks " |
| "%s property", this_mid_prop); |
| prom_halt(); |
| } |
| if (cpuid == id) |
| return dp; |
| } |
| return NULL; |
| } |
| |
| static void __init of_fill_in_cpu_data(void) |
| { |
| struct device_node *dp; |
| const char *mid_prop = get_mid_prop(); |
| |
| ncpus_probed = 0; |
| for_each_node_by_type(dp, "cpu") { |
| int cpuid = of_getintprop_default(dp, mid_prop, -1); |
| const char *this_mid_prop = mid_prop; |
| struct device_node *portid_parent; |
| int portid = -1; |
| |
| portid_parent = NULL; |
| if (cpuid < 0) { |
| this_mid_prop = "cpuid"; |
| cpuid = of_getintprop_default(dp, this_mid_prop, -1); |
| if (cpuid >= 0) { |
| int limit = 2; |
| |
| portid_parent = dp; |
| while (limit--) { |
| portid_parent = portid_parent->parent; |
| if (!portid_parent) |
| break; |
| portid = of_getintprop_default(portid_parent, |
| "portid", -1); |
| if (portid >= 0) |
| break; |
| } |
| } |
| } |
| |
| if (cpuid < 0) { |
| prom_printf("OF: Serious problem, cpu lacks " |
| "%s property", this_mid_prop); |
| prom_halt(); |
| } |
| |
| ncpus_probed++; |
| |
| #ifdef CONFIG_SMP |
| if (cpuid >= NR_CPUS) { |
| printk(KERN_WARNING "Ignoring CPU %d which is " |
| ">= NR_CPUS (%d)\n", |
| cpuid, NR_CPUS); |
| continue; |
| } |
| #else |
| /* On uniprocessor we only want the values for the |
| * real physical cpu the kernel booted onto, however |
| * cpu_data() only has one entry at index 0. |
| */ |
| if (cpuid != real_hard_smp_processor_id()) |
| continue; |
| cpuid = 0; |
| #endif |
| |
| cpu_data(cpuid).clock_tick = |
| of_getintprop_default(dp, "clock-frequency", 0); |
| |
| if (portid_parent) { |
| cpu_data(cpuid).dcache_size = |
| of_getintprop_default(dp, "l1-dcache-size", |
| 16 * 1024); |
| cpu_data(cpuid).dcache_line_size = |
| of_getintprop_default(dp, "l1-dcache-line-size", |
| 32); |
| cpu_data(cpuid).icache_size = |
| of_getintprop_default(dp, "l1-icache-size", |
| 8 * 1024); |
| cpu_data(cpuid).icache_line_size = |
| of_getintprop_default(dp, "l1-icache-line-size", |
| 32); |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(dp, "l2-cache-size", 0); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(dp, "l2-cache-line-size", 0); |
| if (!cpu_data(cpuid).ecache_size || |
| !cpu_data(cpuid).ecache_line_size) { |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(portid_parent, |
| "l2-cache-size", |
| (4 * 1024 * 1024)); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(portid_parent, |
| "l2-cache-line-size", 64); |
| } |
| |
| cpu_data(cpuid).core_id = portid + 1; |
| cpu_data(cpuid).proc_id = portid; |
| #ifdef CONFIG_SMP |
| sparc64_multi_core = 1; |
| #endif |
| } else { |
| cpu_data(cpuid).dcache_size = |
| of_getintprop_default(dp, "dcache-size", 16 * 1024); |
| cpu_data(cpuid).dcache_line_size = |
| of_getintprop_default(dp, "dcache-line-size", 32); |
| |
| cpu_data(cpuid).icache_size = |
| of_getintprop_default(dp, "icache-size", 16 * 1024); |
| cpu_data(cpuid).icache_line_size = |
| of_getintprop_default(dp, "icache-line-size", 32); |
| |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(dp, "ecache-size", |
| (4 * 1024 * 1024)); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(dp, "ecache-line-size", 64); |
| |
| cpu_data(cpuid).core_id = 0; |
| cpu_data(cpuid).proc_id = -1; |
| } |
| |
| #ifdef CONFIG_SMP |
| cpu_set(cpuid, cpu_present_map); |
| cpu_set(cpuid, cpu_possible_map); |
| #endif |
| } |
| |
| smp_fill_in_sib_core_maps(); |
| } |
| |
| struct device_node *of_console_device; |
| EXPORT_SYMBOL(of_console_device); |
| |
| char *of_console_path; |
| EXPORT_SYMBOL(of_console_path); |
| |
| char *of_console_options; |
| EXPORT_SYMBOL(of_console_options); |
| |
| static void __init of_console_init(void) |
| { |
| char *msg = "OF stdout device is: %s\n"; |
| struct device_node *dp; |
| const char *type; |
| phandle node; |
| |
| of_console_path = prom_early_alloc(256); |
| if (prom_ihandle2path(prom_stdout, of_console_path, 256) < 0) { |
| prom_printf("Cannot obtain path of stdout.\n"); |
| prom_halt(); |
| } |
| of_console_options = strrchr(of_console_path, ':'); |
| if (of_console_options) { |
| of_console_options++; |
| if (*of_console_options == '\0') |
| of_console_options = NULL; |
| } |
| |
| node = prom_inst2pkg(prom_stdout); |
| if (!node) { |
| prom_printf("Cannot resolve stdout node from " |
| "instance %08x.\n", prom_stdout); |
| prom_halt(); |
| } |
| |
| dp = of_find_node_by_phandle(node); |
| type = of_get_property(dp, "device_type", NULL); |
| if (!type) { |
| prom_printf("Console stdout lacks device_type property.\n"); |
| prom_halt(); |
| } |
| |
| if (strcmp(type, "display") && strcmp(type, "serial")) { |
| prom_printf("Console device_type is neither display " |
| "nor serial.\n"); |
| prom_halt(); |
| } |
| |
| of_console_device = dp; |
| |
| printk(msg, of_console_path); |
| } |
| |
| void __init prom_build_devicetree(void) |
| { |
| struct device_node **nextp; |
| |
| allnodes = create_node(prom_root_node, NULL); |
| allnodes->path_component_name = ""; |
| allnodes->full_name = "/"; |
| |
| nextp = &allnodes->allnext; |
| allnodes->child = build_tree(allnodes, |
| prom_getchild(allnodes->node), |
| &nextp); |
| of_console_init(); |
| |
| printk("PROM: Built device tree with %u bytes of memory.\n", |
| prom_early_allocated); |
| |
| if (tlb_type != hypervisor) |
| of_fill_in_cpu_data(); |
| } |