| /* auxio.c: Probing for the Sparc AUXIO register at boot time. |
| * |
| * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) |
| * |
| * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| |
| #include <asm/prom.h> |
| #include <asm/of_device.h> |
| #include <asm/io.h> |
| #include <asm/auxio.h> |
| |
| void __iomem *auxio_register = NULL; |
| EXPORT_SYMBOL(auxio_register); |
| |
| enum auxio_type { |
| AUXIO_TYPE_NODEV, |
| AUXIO_TYPE_SBUS, |
| AUXIO_TYPE_EBUS |
| }; |
| |
| static enum auxio_type auxio_devtype = AUXIO_TYPE_NODEV; |
| static DEFINE_SPINLOCK(auxio_lock); |
| |
| static void __auxio_sbus_set(u8 bits_on, u8 bits_off) |
| { |
| if (auxio_register) { |
| unsigned char regval; |
| unsigned long flags; |
| unsigned char newval; |
| |
| spin_lock_irqsave(&auxio_lock, flags); |
| |
| regval = sbus_readb(auxio_register); |
| newval = regval | bits_on; |
| newval &= ~bits_off; |
| newval &= ~AUXIO_AUX1_MASK; |
| sbus_writeb(newval, auxio_register); |
| |
| spin_unlock_irqrestore(&auxio_lock, flags); |
| } |
| } |
| |
| static void __auxio_ebus_set(u8 bits_on, u8 bits_off) |
| { |
| if (auxio_register) { |
| unsigned char regval; |
| unsigned long flags; |
| unsigned char newval; |
| |
| spin_lock_irqsave(&auxio_lock, flags); |
| |
| regval = (u8)readl(auxio_register); |
| newval = regval | bits_on; |
| newval &= ~bits_off; |
| writel((u32)newval, auxio_register); |
| |
| spin_unlock_irqrestore(&auxio_lock, flags); |
| } |
| } |
| |
| static inline void __auxio_ebus_set_led(int on) |
| { |
| (on) ? __auxio_ebus_set(AUXIO_PCIO_LED, 0) : |
| __auxio_ebus_set(0, AUXIO_PCIO_LED) ; |
| } |
| |
| static inline void __auxio_sbus_set_led(int on) |
| { |
| (on) ? __auxio_sbus_set(AUXIO_AUX1_LED, 0) : |
| __auxio_sbus_set(0, AUXIO_AUX1_LED) ; |
| } |
| |
| void auxio_set_led(int on) |
| { |
| switch(auxio_devtype) { |
| case AUXIO_TYPE_SBUS: |
| __auxio_sbus_set_led(on); |
| break; |
| case AUXIO_TYPE_EBUS: |
| __auxio_ebus_set_led(on); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static inline void __auxio_sbus_set_lte(int on) |
| { |
| (on) ? __auxio_sbus_set(AUXIO_AUX1_LTE, 0) : |
| __auxio_sbus_set(0, AUXIO_AUX1_LTE) ; |
| } |
| |
| void auxio_set_lte(int on) |
| { |
| switch(auxio_devtype) { |
| case AUXIO_TYPE_SBUS: |
| __auxio_sbus_set_lte(on); |
| break; |
| case AUXIO_TYPE_EBUS: |
| /* FALL-THROUGH */ |
| default: |
| break; |
| } |
| } |
| |
| static struct of_device_id auxio_match[] = { |
| { |
| .name = "auxio", |
| }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, auxio_match); |
| |
| static int __devinit auxio_probe(struct of_device *dev, const struct of_device_id *match) |
| { |
| struct device_node *dp = dev->node; |
| unsigned long size; |
| |
| if (!strcmp(dp->parent->name, "ebus")) { |
| auxio_devtype = AUXIO_TYPE_EBUS; |
| size = sizeof(u32); |
| } else if (!strcmp(dp->parent->name, "sbus")) { |
| auxio_devtype = AUXIO_TYPE_SBUS; |
| size = 1; |
| } else { |
| printk("auxio: Unknown parent bus type [%s]\n", |
| dp->parent->name); |
| return -ENODEV; |
| } |
| auxio_register = of_ioremap(&dev->resource[0], 0, size, "auxio"); |
| if (!auxio_register) |
| return -ENODEV; |
| |
| printk(KERN_INFO "AUXIO: Found device at %s\n", |
| dp->full_name); |
| |
| if (auxio_devtype == AUXIO_TYPE_EBUS) |
| auxio_set_led(AUXIO_LED_ON); |
| |
| return 0; |
| } |
| |
| static struct of_platform_driver auxio_driver = { |
| .match_table = auxio_match, |
| .probe = auxio_probe, |
| .driver = { |
| .name = "auxio", |
| }, |
| }; |
| |
| static int __init auxio_init(void) |
| { |
| return of_register_driver(&auxio_driver, &of_platform_bus_type); |
| } |
| |
| /* Must be after subsys_initcall() so that busses are probed. Must |
| * be before device_initcall() because things like the floppy driver |
| * need to use the AUXIO register. |
| */ |
| fs_initcall(auxio_init); |