| /* | |
| * Distributed Switch Architecture loopback driver | |
| * | |
| * Copyright (C) 2016, Florian Fainelli <f.fainelli@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/platform_device.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/phy.h> | |
| #include <linux/phy_fixed.h> | |
| #include <linux/export.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/module.h> | |
| #include <linux/if_bridge.h> | |
| #include <net/dsa.h> | |
| #include "dsa_loop.h" | |
| struct dsa_loop_vlan { | |
| u16 members; | |
| u16 untagged; | |
| }; | |
| struct dsa_loop_mib_entry { | |
| char name[ETH_GSTRING_LEN]; | |
| unsigned long val; | |
| }; | |
| enum dsa_loop_mib_counters { | |
| DSA_LOOP_PHY_READ_OK, | |
| DSA_LOOP_PHY_READ_ERR, | |
| DSA_LOOP_PHY_WRITE_OK, | |
| DSA_LOOP_PHY_WRITE_ERR, | |
| __DSA_LOOP_CNT_MAX, | |
| }; | |
| static struct dsa_loop_mib_entry dsa_loop_mibs[] = { | |
| [DSA_LOOP_PHY_READ_OK] = { "phy_read_ok", }, | |
| [DSA_LOOP_PHY_READ_ERR] = { "phy_read_err", }, | |
| [DSA_LOOP_PHY_WRITE_OK] = { "phy_write_ok", }, | |
| [DSA_LOOP_PHY_WRITE_ERR] = { "phy_write_err", }, | |
| }; | |
| struct dsa_loop_port { | |
| struct dsa_loop_mib_entry mib[__DSA_LOOP_CNT_MAX]; | |
| }; | |
| #define DSA_LOOP_VLANS 5 | |
| struct dsa_loop_priv { | |
| struct mii_bus *bus; | |
| unsigned int port_base; | |
| struct dsa_loop_vlan vlans[DSA_LOOP_VLANS]; | |
| struct net_device *netdev; | |
| struct dsa_loop_port ports[DSA_MAX_PORTS]; | |
| u16 pvid; | |
| }; | |
| static struct phy_device *phydevs[PHY_MAX_ADDR]; | |
| static enum dsa_tag_protocol dsa_loop_get_protocol(struct dsa_switch *ds, | |
| int port) | |
| { | |
| dev_dbg(ds->dev, "%s: port: %d\n", __func__, port); | |
| return DSA_TAG_PROTO_NONE; | |
| } | |
| static int dsa_loop_setup(struct dsa_switch *ds) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| unsigned int i; | |
| for (i = 0; i < ds->num_ports; i++) | |
| memcpy(ps->ports[i].mib, dsa_loop_mibs, | |
| sizeof(dsa_loop_mibs)); | |
| dev_dbg(ds->dev, "%s\n", __func__); | |
| return 0; | |
| } | |
| static int dsa_loop_get_sset_count(struct dsa_switch *ds, int port, int sset) | |
| { | |
| if (sset != ETH_SS_STATS && sset != ETH_SS_PHY_STATS) | |
| return 0; | |
| return __DSA_LOOP_CNT_MAX; | |
| } | |
| static void dsa_loop_get_strings(struct dsa_switch *ds, int port, | |
| u32 stringset, uint8_t *data) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| unsigned int i; | |
| if (stringset != ETH_SS_STATS && stringset != ETH_SS_PHY_STATS) | |
| return; | |
| for (i = 0; i < __DSA_LOOP_CNT_MAX; i++) | |
| memcpy(data + i * ETH_GSTRING_LEN, | |
| ps->ports[port].mib[i].name, ETH_GSTRING_LEN); | |
| } | |
| static void dsa_loop_get_ethtool_stats(struct dsa_switch *ds, int port, | |
| uint64_t *data) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| unsigned int i; | |
| for (i = 0; i < __DSA_LOOP_CNT_MAX; i++) | |
| data[i] = ps->ports[port].mib[i].val; | |
| } | |
| static int dsa_loop_phy_read(struct dsa_switch *ds, int port, int regnum) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| struct mii_bus *bus = ps->bus; | |
| int ret; | |
| ret = mdiobus_read_nested(bus, ps->port_base + port, regnum); | |
| if (ret < 0) | |
| ps->ports[port].mib[DSA_LOOP_PHY_READ_ERR].val++; | |
| else | |
| ps->ports[port].mib[DSA_LOOP_PHY_READ_OK].val++; | |
| return ret; | |
| } | |
| static int dsa_loop_phy_write(struct dsa_switch *ds, int port, | |
| int regnum, u16 value) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| struct mii_bus *bus = ps->bus; | |
| int ret; | |
| ret = mdiobus_write_nested(bus, ps->port_base + port, regnum, value); | |
| if (ret < 0) | |
| ps->ports[port].mib[DSA_LOOP_PHY_WRITE_ERR].val++; | |
| else | |
| ps->ports[port].mib[DSA_LOOP_PHY_WRITE_OK].val++; | |
| return ret; | |
| } | |
| static int dsa_loop_port_bridge_join(struct dsa_switch *ds, int port, | |
| struct net_device *bridge) | |
| { | |
| dev_dbg(ds->dev, "%s: port: %d, bridge: %s\n", | |
| __func__, port, bridge->name); | |
| return 0; | |
| } | |
| static void dsa_loop_port_bridge_leave(struct dsa_switch *ds, int port, | |
| struct net_device *bridge) | |
| { | |
| dev_dbg(ds->dev, "%s: port: %d, bridge: %s\n", | |
| __func__, port, bridge->name); | |
| } | |
| static void dsa_loop_port_stp_state_set(struct dsa_switch *ds, int port, | |
| u8 state) | |
| { | |
| dev_dbg(ds->dev, "%s: port: %d, state: %d\n", | |
| __func__, port, state); | |
| } | |
| static int dsa_loop_port_vlan_filtering(struct dsa_switch *ds, int port, | |
| bool vlan_filtering) | |
| { | |
| dev_dbg(ds->dev, "%s: port: %d, vlan_filtering: %d\n", | |
| __func__, port, vlan_filtering); | |
| return 0; | |
| } | |
| static int | |
| dsa_loop_port_vlan_prepare(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| struct dsa_loop_priv *ps = ds->priv; | |
| struct mii_bus *bus = ps->bus; | |
| dev_dbg(ds->dev, "%s: port: %d, vlan: %d-%d", | |
| __func__, port, vlan->vid_begin, vlan->vid_end); | |
| /* Just do a sleeping operation to make lockdep checks effective */ | |
| mdiobus_read(bus, ps->port_base + port, MII_BMSR); | |
| if (vlan->vid_end > DSA_LOOP_VLANS) | |
| return -ERANGE; | |
| return 0; | |
| } | |
| static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; | |
| struct dsa_loop_priv *ps = ds->priv; | |
| struct mii_bus *bus = ps->bus; | |
| struct dsa_loop_vlan *vl; | |
| u16 vid; | |
| /* Just do a sleeping operation to make lockdep checks effective */ | |
| mdiobus_read(bus, ps->port_base + port, MII_BMSR); | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { | |
| vl = &ps->vlans[vid]; | |
| vl->members |= BIT(port); | |
| if (untagged) | |
| vl->untagged |= BIT(port); | |
| else | |
| vl->untagged &= ~BIT(port); | |
| dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n", | |
| __func__, port, vid, untagged ? "un" : "", pvid); | |
| } | |
| if (pvid) | |
| ps->pvid = vid; | |
| } | |
| static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| struct dsa_loop_priv *ps = ds->priv; | |
| struct mii_bus *bus = ps->bus; | |
| struct dsa_loop_vlan *vl; | |
| u16 vid, pvid = ps->pvid; | |
| /* Just do a sleeping operation to make lockdep checks effective */ | |
| mdiobus_read(bus, ps->port_base + port, MII_BMSR); | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { | |
| vl = &ps->vlans[vid]; | |
| vl->members &= ~BIT(port); | |
| if (untagged) | |
| vl->untagged &= ~BIT(port); | |
| if (pvid == vid) | |
| pvid = 1; | |
| dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n", | |
| __func__, port, vid, untagged ? "un" : "", pvid); | |
| } | |
| ps->pvid = pvid; | |
| return 0; | |
| } | |
| static const struct dsa_switch_ops dsa_loop_driver = { | |
| .get_tag_protocol = dsa_loop_get_protocol, | |
| .setup = dsa_loop_setup, | |
| .get_strings = dsa_loop_get_strings, | |
| .get_ethtool_stats = dsa_loop_get_ethtool_stats, | |
| .get_sset_count = dsa_loop_get_sset_count, | |
| .get_ethtool_phy_stats = dsa_loop_get_ethtool_stats, | |
| .phy_read = dsa_loop_phy_read, | |
| .phy_write = dsa_loop_phy_write, | |
| .port_bridge_join = dsa_loop_port_bridge_join, | |
| .port_bridge_leave = dsa_loop_port_bridge_leave, | |
| .port_stp_state_set = dsa_loop_port_stp_state_set, | |
| .port_vlan_filtering = dsa_loop_port_vlan_filtering, | |
| .port_vlan_prepare = dsa_loop_port_vlan_prepare, | |
| .port_vlan_add = dsa_loop_port_vlan_add, | |
| .port_vlan_del = dsa_loop_port_vlan_del, | |
| }; | |
| static int dsa_loop_drv_probe(struct mdio_device *mdiodev) | |
| { | |
| struct dsa_loop_pdata *pdata = mdiodev->dev.platform_data; | |
| struct dsa_loop_priv *ps; | |
| struct dsa_switch *ds; | |
| if (!pdata) | |
| return -ENODEV; | |
| dev_info(&mdiodev->dev, "%s: 0x%0x\n", | |
| pdata->name, pdata->enabled_ports); | |
| ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); | |
| if (!ds) | |
| return -ENOMEM; | |
| ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL); | |
| if (!ps) | |
| return -ENOMEM; | |
| ps->netdev = dev_get_by_name(&init_net, pdata->netdev); | |
| if (!ps->netdev) | |
| return -EPROBE_DEFER; | |
| pdata->cd.netdev[DSA_LOOP_CPU_PORT] = &ps->netdev->dev; | |
| ds->dev = &mdiodev->dev; | |
| ds->ops = &dsa_loop_driver; | |
| ds->priv = ps; | |
| ps->bus = mdiodev->bus; | |
| dev_set_drvdata(&mdiodev->dev, ds); | |
| return dsa_register_switch(ds); | |
| } | |
| static void dsa_loop_drv_remove(struct mdio_device *mdiodev) | |
| { | |
| struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev); | |
| struct dsa_loop_priv *ps = ds->priv; | |
| dsa_unregister_switch(ds); | |
| dev_put(ps->netdev); | |
| } | |
| static struct mdio_driver dsa_loop_drv = { | |
| .mdiodrv.driver = { | |
| .name = "dsa-loop", | |
| }, | |
| .probe = dsa_loop_drv_probe, | |
| .remove = dsa_loop_drv_remove, | |
| }; | |
| #define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) | |
| static int __init dsa_loop_init(void) | |
| { | |
| struct fixed_phy_status status = { | |
| .link = 1, | |
| .speed = SPEED_100, | |
| .duplex = DUPLEX_FULL, | |
| }; | |
| unsigned int i; | |
| for (i = 0; i < NUM_FIXED_PHYS; i++) | |
| phydevs[i] = fixed_phy_register(PHY_POLL, &status, -1, NULL); | |
| return mdio_driver_register(&dsa_loop_drv); | |
| } | |
| module_init(dsa_loop_init); | |
| static void __exit dsa_loop_exit(void) | |
| { | |
| unsigned int i; | |
| mdio_driver_unregister(&dsa_loop_drv); | |
| for (i = 0; i < NUM_FIXED_PHYS; i++) | |
| if (!IS_ERR(phydevs[i])) | |
| fixed_phy_unregister(phydevs[i]); | |
| } | |
| module_exit(dsa_loop_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Florian Fainelli"); | |
| MODULE_DESCRIPTION("DSA loopback driver"); |