| /* | |
| * Copyright (C) 2003 Sistina Software Limited. | |
| * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. | |
| * | |
| * This file is released under the GPL. | |
| */ | |
| #include "dm-bio-record.h" | |
| #include <linux/init.h> | |
| #include <linux/mempool.h> | |
| #include <linux/module.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/device-mapper.h> | |
| #include <linux/dm-io.h> | |
| #include <linux/dm-dirty-log.h> | |
| #include <linux/dm-kcopyd.h> | |
| #include <linux/dm-region-hash.h> | |
| #define DM_MSG_PREFIX "raid1" | |
| #define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */ | |
| #define MAX_NR_MIRRORS (DM_KCOPYD_MAX_REGIONS + 1) | |
| #define DM_RAID1_HANDLE_ERRORS 0x01 | |
| #define DM_RAID1_KEEP_LOG 0x02 | |
| #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS) | |
| #define keep_log(p) ((p)->features & DM_RAID1_KEEP_LOG) | |
| static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped); | |
| /*----------------------------------------------------------------- | |
| * Mirror set structures. | |
| *---------------------------------------------------------------*/ | |
| enum dm_raid1_error { | |
| DM_RAID1_WRITE_ERROR, | |
| DM_RAID1_FLUSH_ERROR, | |
| DM_RAID1_SYNC_ERROR, | |
| DM_RAID1_READ_ERROR | |
| }; | |
| struct mirror { | |
| struct mirror_set *ms; | |
| atomic_t error_count; | |
| unsigned long error_type; | |
| struct dm_dev *dev; | |
| sector_t offset; | |
| }; | |
| struct mirror_set { | |
| struct dm_target *ti; | |
| struct list_head list; | |
| uint64_t features; | |
| spinlock_t lock; /* protects the lists */ | |
| struct bio_list reads; | |
| struct bio_list writes; | |
| struct bio_list failures; | |
| struct bio_list holds; /* bios are waiting until suspend */ | |
| struct dm_region_hash *rh; | |
| struct dm_kcopyd_client *kcopyd_client; | |
| struct dm_io_client *io_client; | |
| /* recovery */ | |
| region_t nr_regions; | |
| int in_sync; | |
| int log_failure; | |
| int leg_failure; | |
| atomic_t suspend; | |
| atomic_t default_mirror; /* Default mirror */ | |
| struct workqueue_struct *kmirrord_wq; | |
| struct work_struct kmirrord_work; | |
| struct timer_list timer; | |
| unsigned long timer_pending; | |
| struct work_struct trigger_event; | |
| unsigned nr_mirrors; | |
| struct mirror mirror[0]; | |
| }; | |
| DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(raid1_resync_throttle, | |
| "A percentage of time allocated for raid resynchronization"); | |
| static void wakeup_mirrord(void *context) | |
| { | |
| struct mirror_set *ms = context; | |
| queue_work(ms->kmirrord_wq, &ms->kmirrord_work); | |
| } | |
| static void delayed_wake_fn(struct timer_list *t) | |
| { | |
| struct mirror_set *ms = from_timer(ms, t, timer); | |
| clear_bit(0, &ms->timer_pending); | |
| wakeup_mirrord(ms); | |
| } | |
| static void delayed_wake(struct mirror_set *ms) | |
| { | |
| if (test_and_set_bit(0, &ms->timer_pending)) | |
| return; | |
| ms->timer.expires = jiffies + HZ / 5; | |
| add_timer(&ms->timer); | |
| } | |
| static void wakeup_all_recovery_waiters(void *context) | |
| { | |
| wake_up_all(&_kmirrord_recovery_stopped); | |
| } | |
| static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) | |
| { | |
| unsigned long flags; | |
| int should_wake = 0; | |
| struct bio_list *bl; | |
| bl = (rw == WRITE) ? &ms->writes : &ms->reads; | |
| spin_lock_irqsave(&ms->lock, flags); | |
| should_wake = !(bl->head); | |
| bio_list_add(bl, bio); | |
| spin_unlock_irqrestore(&ms->lock, flags); | |
| if (should_wake) | |
| wakeup_mirrord(ms); | |
| } | |
| static void dispatch_bios(void *context, struct bio_list *bio_list) | |
| { | |
| struct mirror_set *ms = context; | |
| struct bio *bio; | |
| while ((bio = bio_list_pop(bio_list))) | |
| queue_bio(ms, bio, WRITE); | |
| } | |
| struct dm_raid1_bio_record { | |
| struct mirror *m; | |
| /* if details->bi_disk == NULL, details were not saved */ | |
| struct dm_bio_details details; | |
| region_t write_region; | |
| }; | |
| /* | |
| * Every mirror should look like this one. | |
| */ | |
| #define DEFAULT_MIRROR 0 | |
| /* | |
| * This is yucky. We squirrel the mirror struct away inside | |
| * bi_next for read/write buffers. This is safe since the bh | |
| * doesn't get submitted to the lower levels of block layer. | |
| */ | |
| static struct mirror *bio_get_m(struct bio *bio) | |
| { | |
| return (struct mirror *) bio->bi_next; | |
| } | |
| static void bio_set_m(struct bio *bio, struct mirror *m) | |
| { | |
| bio->bi_next = (struct bio *) m; | |
| } | |
| static struct mirror *get_default_mirror(struct mirror_set *ms) | |
| { | |
| return &ms->mirror[atomic_read(&ms->default_mirror)]; | |
| } | |
| static void set_default_mirror(struct mirror *m) | |
| { | |
| struct mirror_set *ms = m->ms; | |
| struct mirror *m0 = &(ms->mirror[0]); | |
| atomic_set(&ms->default_mirror, m - m0); | |
| } | |
| static struct mirror *get_valid_mirror(struct mirror_set *ms) | |
| { | |
| struct mirror *m; | |
| for (m = ms->mirror; m < ms->mirror + ms->nr_mirrors; m++) | |
| if (!atomic_read(&m->error_count)) | |
| return m; | |
| return NULL; | |
| } | |
| /* fail_mirror | |
| * @m: mirror device to fail | |
| * @error_type: one of the enum's, DM_RAID1_*_ERROR | |
| * | |
| * If errors are being handled, record the type of | |
| * error encountered for this device. If this type | |
| * of error has already been recorded, we can return; | |
| * otherwise, we must signal userspace by triggering | |
| * an event. Additionally, if the device is the | |
| * primary device, we must choose a new primary, but | |
| * only if the mirror is in-sync. | |
| * | |
| * This function must not block. | |
| */ | |
| static void fail_mirror(struct mirror *m, enum dm_raid1_error error_type) | |
| { | |
| struct mirror_set *ms = m->ms; | |
| struct mirror *new; | |
| ms->leg_failure = 1; | |
| /* | |
| * error_count is used for nothing more than a | |
| * simple way to tell if a device has encountered | |
| * errors. | |
| */ | |
| atomic_inc(&m->error_count); | |
| if (test_and_set_bit(error_type, &m->error_type)) | |
| return; | |
| if (!errors_handled(ms)) | |
| return; | |
| if (m != get_default_mirror(ms)) | |
| goto out; | |
| if (!ms->in_sync && !keep_log(ms)) { | |
| /* | |
| * Better to issue requests to same failing device | |
| * than to risk returning corrupt data. | |
| */ | |
| DMERR("Primary mirror (%s) failed while out-of-sync: " | |
| "Reads may fail.", m->dev->name); | |
| goto out; | |
| } | |
| new = get_valid_mirror(ms); | |
| if (new) | |
| set_default_mirror(new); | |
| else | |
| DMWARN("All sides of mirror have failed."); | |
| out: | |
| schedule_work(&ms->trigger_event); | |
| } | |
| static int mirror_flush(struct dm_target *ti) | |
| { | |
| struct mirror_set *ms = ti->private; | |
| unsigned long error_bits; | |
| unsigned int i; | |
| struct dm_io_region io[MAX_NR_MIRRORS]; | |
| struct mirror *m; | |
| struct dm_io_request io_req = { | |
| .bi_op = REQ_OP_WRITE, | |
| .bi_op_flags = REQ_PREFLUSH | REQ_SYNC, | |
| .mem.type = DM_IO_KMEM, | |
| .mem.ptr.addr = NULL, | |
| .client = ms->io_client, | |
| }; | |
| for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++) { | |
| io[i].bdev = m->dev->bdev; | |
| io[i].sector = 0; | |
| io[i].count = 0; | |
| } | |
| error_bits = -1; | |
| dm_io(&io_req, ms->nr_mirrors, io, &error_bits); | |
| if (unlikely(error_bits != 0)) { | |
| for (i = 0; i < ms->nr_mirrors; i++) | |
| if (test_bit(i, &error_bits)) | |
| fail_mirror(ms->mirror + i, | |
| DM_RAID1_FLUSH_ERROR); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| /*----------------------------------------------------------------- | |
| * Recovery. | |
| * | |
| * When a mirror is first activated we may find that some regions | |
| * are in the no-sync state. We have to recover these by | |
| * recopying from the default mirror to all the others. | |
| *---------------------------------------------------------------*/ | |
| static void recovery_complete(int read_err, unsigned long write_err, | |
| void *context) | |
| { | |
| struct dm_region *reg = context; | |
| struct mirror_set *ms = dm_rh_region_context(reg); | |
| int m, bit = 0; | |
| if (read_err) { | |
| /* Read error means the failure of default mirror. */ | |
| DMERR_LIMIT("Unable to read primary mirror during recovery"); | |
| fail_mirror(get_default_mirror(ms), DM_RAID1_SYNC_ERROR); | |
| } | |
| if (write_err) { | |
| DMERR_LIMIT("Write error during recovery (error = 0x%lx)", | |
| write_err); | |
| /* | |
| * Bits correspond to devices (excluding default mirror). | |
| * The default mirror cannot change during recovery. | |
| */ | |
| for (m = 0; m < ms->nr_mirrors; m++) { | |
| if (&ms->mirror[m] == get_default_mirror(ms)) | |
| continue; | |
| if (test_bit(bit, &write_err)) | |
| fail_mirror(ms->mirror + m, | |
| DM_RAID1_SYNC_ERROR); | |
| bit++; | |
| } | |
| } | |
| dm_rh_recovery_end(reg, !(read_err || write_err)); | |
| } | |
| static int recover(struct mirror_set *ms, struct dm_region *reg) | |
| { | |
| int r; | |
| unsigned i; | |
| struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest; | |
| struct mirror *m; | |
| unsigned long flags = 0; | |
| region_t key = dm_rh_get_region_key(reg); | |
| sector_t region_size = dm_rh_get_region_size(ms->rh); | |
| /* fill in the source */ | |
| m = get_default_mirror(ms); | |
| from.bdev = m->dev->bdev; | |
| from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key); | |
| if (key == (ms->nr_regions - 1)) { | |
| /* | |
| * The final region may be smaller than | |
| * region_size. | |
| */ | |
| from.count = ms->ti->len & (region_size - 1); | |
| if (!from.count) | |
| from.count = region_size; | |
| } else | |
| from.count = region_size; | |
| /* fill in the destinations */ | |
| for (i = 0, dest = to; i < ms->nr_mirrors; i++) { | |
| if (&ms->mirror[i] == get_default_mirror(ms)) | |
| continue; | |
| m = ms->mirror + i; | |
| dest->bdev = m->dev->bdev; | |
| dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key); | |
| dest->count = from.count; | |
| dest++; | |
| } | |
| /* hand to kcopyd */ | |
| if (!errors_handled(ms)) | |
| set_bit(DM_KCOPYD_IGNORE_ERROR, &flags); | |
| r = dm_kcopyd_copy(ms->kcopyd_client, &from, ms->nr_mirrors - 1, to, | |
| flags, recovery_complete, reg); | |
| return r; | |
| } | |
| static void reset_ms_flags(struct mirror_set *ms) | |
| { | |
| unsigned int m; | |
| ms->leg_failure = 0; | |
| for (m = 0; m < ms->nr_mirrors; m++) { | |
| atomic_set(&(ms->mirror[m].error_count), 0); | |
| ms->mirror[m].error_type = 0; | |
| } | |
| } | |
| static void do_recovery(struct mirror_set *ms) | |
| { | |
| struct dm_region *reg; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| int r; | |
| /* | |
| * Start quiescing some regions. | |
| */ | |
| dm_rh_recovery_prepare(ms->rh); | |
| /* | |
| * Copy any already quiesced regions. | |
| */ | |
| while ((reg = dm_rh_recovery_start(ms->rh))) { | |
| r = recover(ms, reg); | |
| if (r) | |
| dm_rh_recovery_end(reg, 0); | |
| } | |
| /* | |
| * Update the in sync flag. | |
| */ | |
| if (!ms->in_sync && | |
| (log->type->get_sync_count(log) == ms->nr_regions)) { | |
| /* the sync is complete */ | |
| dm_table_event(ms->ti->table); | |
| ms->in_sync = 1; | |
| reset_ms_flags(ms); | |
| } | |
| } | |
| /*----------------------------------------------------------------- | |
| * Reads | |
| *---------------------------------------------------------------*/ | |
| static struct mirror *choose_mirror(struct mirror_set *ms, sector_t sector) | |
| { | |
| struct mirror *m = get_default_mirror(ms); | |
| do { | |
| if (likely(!atomic_read(&m->error_count))) | |
| return m; | |
| if (m-- == ms->mirror) | |
| m += ms->nr_mirrors; | |
| } while (m != get_default_mirror(ms)); | |
| return NULL; | |
| } | |
| static int default_ok(struct mirror *m) | |
| { | |
| struct mirror *default_mirror = get_default_mirror(m->ms); | |
| return !atomic_read(&default_mirror->error_count); | |
| } | |
| static int mirror_available(struct mirror_set *ms, struct bio *bio) | |
| { | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| region_t region = dm_rh_bio_to_region(ms->rh, bio); | |
| if (log->type->in_sync(log, region, 0)) | |
| return choose_mirror(ms, bio->bi_iter.bi_sector) ? 1 : 0; | |
| return 0; | |
| } | |
| /* | |
| * remap a buffer to a particular mirror. | |
| */ | |
| static sector_t map_sector(struct mirror *m, struct bio *bio) | |
| { | |
| if (unlikely(!bio->bi_iter.bi_size)) | |
| return 0; | |
| return m->offset + dm_target_offset(m->ms->ti, bio->bi_iter.bi_sector); | |
| } | |
| static void map_bio(struct mirror *m, struct bio *bio) | |
| { | |
| bio_set_dev(bio, m->dev->bdev); | |
| bio->bi_iter.bi_sector = map_sector(m, bio); | |
| } | |
| static void map_region(struct dm_io_region *io, struct mirror *m, | |
| struct bio *bio) | |
| { | |
| io->bdev = m->dev->bdev; | |
| io->sector = map_sector(m, bio); | |
| io->count = bio_sectors(bio); | |
| } | |
| static void hold_bio(struct mirror_set *ms, struct bio *bio) | |
| { | |
| /* | |
| * Lock is required to avoid race condition during suspend | |
| * process. | |
| */ | |
| spin_lock_irq(&ms->lock); | |
| if (atomic_read(&ms->suspend)) { | |
| spin_unlock_irq(&ms->lock); | |
| /* | |
| * If device is suspended, complete the bio. | |
| */ | |
| if (dm_noflush_suspending(ms->ti)) | |
| bio->bi_status = BLK_STS_DM_REQUEUE; | |
| else | |
| bio->bi_status = BLK_STS_IOERR; | |
| bio_endio(bio); | |
| return; | |
| } | |
| /* | |
| * Hold bio until the suspend is complete. | |
| */ | |
| bio_list_add(&ms->holds, bio); | |
| spin_unlock_irq(&ms->lock); | |
| } | |
| /*----------------------------------------------------------------- | |
| * Reads | |
| *---------------------------------------------------------------*/ | |
| static void read_callback(unsigned long error, void *context) | |
| { | |
| struct bio *bio = context; | |
| struct mirror *m; | |
| m = bio_get_m(bio); | |
| bio_set_m(bio, NULL); | |
| if (likely(!error)) { | |
| bio_endio(bio); | |
| return; | |
| } | |
| fail_mirror(m, DM_RAID1_READ_ERROR); | |
| if (likely(default_ok(m)) || mirror_available(m->ms, bio)) { | |
| DMWARN_LIMIT("Read failure on mirror device %s. " | |
| "Trying alternative device.", | |
| m->dev->name); | |
| queue_bio(m->ms, bio, bio_data_dir(bio)); | |
| return; | |
| } | |
| DMERR_LIMIT("Read failure on mirror device %s. Failing I/O.", | |
| m->dev->name); | |
| bio_io_error(bio); | |
| } | |
| /* Asynchronous read. */ | |
| static void read_async_bio(struct mirror *m, struct bio *bio) | |
| { | |
| struct dm_io_region io; | |
| struct dm_io_request io_req = { | |
| .bi_op = REQ_OP_READ, | |
| .bi_op_flags = 0, | |
| .mem.type = DM_IO_BIO, | |
| .mem.ptr.bio = bio, | |
| .notify.fn = read_callback, | |
| .notify.context = bio, | |
| .client = m->ms->io_client, | |
| }; | |
| map_region(&io, m, bio); | |
| bio_set_m(bio, m); | |
| BUG_ON(dm_io(&io_req, 1, &io, NULL)); | |
| } | |
| static inline int region_in_sync(struct mirror_set *ms, region_t region, | |
| int may_block) | |
| { | |
| int state = dm_rh_get_state(ms->rh, region, may_block); | |
| return state == DM_RH_CLEAN || state == DM_RH_DIRTY; | |
| } | |
| static void do_reads(struct mirror_set *ms, struct bio_list *reads) | |
| { | |
| region_t region; | |
| struct bio *bio; | |
| struct mirror *m; | |
| while ((bio = bio_list_pop(reads))) { | |
| region = dm_rh_bio_to_region(ms->rh, bio); | |
| m = get_default_mirror(ms); | |
| /* | |
| * We can only read balance if the region is in sync. | |
| */ | |
| if (likely(region_in_sync(ms, region, 1))) | |
| m = choose_mirror(ms, bio->bi_iter.bi_sector); | |
| else if (m && atomic_read(&m->error_count)) | |
| m = NULL; | |
| if (likely(m)) | |
| read_async_bio(m, bio); | |
| else | |
| bio_io_error(bio); | |
| } | |
| } | |
| /*----------------------------------------------------------------- | |
| * Writes. | |
| * | |
| * We do different things with the write io depending on the | |
| * state of the region that it's in: | |
| * | |
| * SYNC: increment pending, use kcopyd to write to *all* mirrors | |
| * RECOVERING: delay the io until recovery completes | |
| * NOSYNC: increment pending, just write to the default mirror | |
| *---------------------------------------------------------------*/ | |
| static void write_callback(unsigned long error, void *context) | |
| { | |
| unsigned i; | |
| struct bio *bio = (struct bio *) context; | |
| struct mirror_set *ms; | |
| int should_wake = 0; | |
| unsigned long flags; | |
| ms = bio_get_m(bio)->ms; | |
| bio_set_m(bio, NULL); | |
| /* | |
| * NOTE: We don't decrement the pending count here, | |
| * instead it is done by the targets endio function. | |
| * This way we handle both writes to SYNC and NOSYNC | |
| * regions with the same code. | |
| */ | |
| if (likely(!error)) { | |
| bio_endio(bio); | |
| return; | |
| } | |
| /* | |
| * If the bio is discard, return an error, but do not | |
| * degrade the array. | |
| */ | |
| if (bio_op(bio) == REQ_OP_DISCARD) { | |
| bio->bi_status = BLK_STS_NOTSUPP; | |
| bio_endio(bio); | |
| return; | |
| } | |
| for (i = 0; i < ms->nr_mirrors; i++) | |
| if (test_bit(i, &error)) | |
| fail_mirror(ms->mirror + i, DM_RAID1_WRITE_ERROR); | |
| /* | |
| * Need to raise event. Since raising | |
| * events can block, we need to do it in | |
| * the main thread. | |
| */ | |
| spin_lock_irqsave(&ms->lock, flags); | |
| if (!ms->failures.head) | |
| should_wake = 1; | |
| bio_list_add(&ms->failures, bio); | |
| spin_unlock_irqrestore(&ms->lock, flags); | |
| if (should_wake) | |
| wakeup_mirrord(ms); | |
| } | |
| static void do_write(struct mirror_set *ms, struct bio *bio) | |
| { | |
| unsigned int i; | |
| struct dm_io_region io[MAX_NR_MIRRORS], *dest = io; | |
| struct mirror *m; | |
| struct dm_io_request io_req = { | |
| .bi_op = REQ_OP_WRITE, | |
| .bi_op_flags = bio->bi_opf & (REQ_FUA | REQ_PREFLUSH), | |
| .mem.type = DM_IO_BIO, | |
| .mem.ptr.bio = bio, | |
| .notify.fn = write_callback, | |
| .notify.context = bio, | |
| .client = ms->io_client, | |
| }; | |
| if (bio_op(bio) == REQ_OP_DISCARD) { | |
| io_req.bi_op = REQ_OP_DISCARD; | |
| io_req.mem.type = DM_IO_KMEM; | |
| io_req.mem.ptr.addr = NULL; | |
| } | |
| for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++) | |
| map_region(dest++, m, bio); | |
| /* | |
| * Use default mirror because we only need it to retrieve the reference | |
| * to the mirror set in write_callback(). | |
| */ | |
| bio_set_m(bio, get_default_mirror(ms)); | |
| BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL)); | |
| } | |
| static void do_writes(struct mirror_set *ms, struct bio_list *writes) | |
| { | |
| int state; | |
| struct bio *bio; | |
| struct bio_list sync, nosync, recover, *this_list = NULL; | |
| struct bio_list requeue; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| region_t region; | |
| if (!writes->head) | |
| return; | |
| /* | |
| * Classify each write. | |
| */ | |
| bio_list_init(&sync); | |
| bio_list_init(&nosync); | |
| bio_list_init(&recover); | |
| bio_list_init(&requeue); | |
| while ((bio = bio_list_pop(writes))) { | |
| if ((bio->bi_opf & REQ_PREFLUSH) || | |
| (bio_op(bio) == REQ_OP_DISCARD)) { | |
| bio_list_add(&sync, bio); | |
| continue; | |
| } | |
| region = dm_rh_bio_to_region(ms->rh, bio); | |
| if (log->type->is_remote_recovering && | |
| log->type->is_remote_recovering(log, region)) { | |
| bio_list_add(&requeue, bio); | |
| continue; | |
| } | |
| state = dm_rh_get_state(ms->rh, region, 1); | |
| switch (state) { | |
| case DM_RH_CLEAN: | |
| case DM_RH_DIRTY: | |
| this_list = &sync; | |
| break; | |
| case DM_RH_NOSYNC: | |
| this_list = &nosync; | |
| break; | |
| case DM_RH_RECOVERING: | |
| this_list = &recover; | |
| break; | |
| } | |
| bio_list_add(this_list, bio); | |
| } | |
| /* | |
| * Add bios that are delayed due to remote recovery | |
| * back on to the write queue | |
| */ | |
| if (unlikely(requeue.head)) { | |
| spin_lock_irq(&ms->lock); | |
| bio_list_merge(&ms->writes, &requeue); | |
| spin_unlock_irq(&ms->lock); | |
| delayed_wake(ms); | |
| } | |
| /* | |
| * Increment the pending counts for any regions that will | |
| * be written to (writes to recover regions are going to | |
| * be delayed). | |
| */ | |
| dm_rh_inc_pending(ms->rh, &sync); | |
| dm_rh_inc_pending(ms->rh, &nosync); | |
| /* | |
| * If the flush fails on a previous call and succeeds here, | |
| * we must not reset the log_failure variable. We need | |
| * userspace interaction to do that. | |
| */ | |
| ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure; | |
| /* | |
| * Dispatch io. | |
| */ | |
| if (unlikely(ms->log_failure) && errors_handled(ms)) { | |
| spin_lock_irq(&ms->lock); | |
| bio_list_merge(&ms->failures, &sync); | |
| spin_unlock_irq(&ms->lock); | |
| wakeup_mirrord(ms); | |
| } else | |
| while ((bio = bio_list_pop(&sync))) | |
| do_write(ms, bio); | |
| while ((bio = bio_list_pop(&recover))) | |
| dm_rh_delay(ms->rh, bio); | |
| while ((bio = bio_list_pop(&nosync))) { | |
| if (unlikely(ms->leg_failure) && errors_handled(ms) && !keep_log(ms)) { | |
| spin_lock_irq(&ms->lock); | |
| bio_list_add(&ms->failures, bio); | |
| spin_unlock_irq(&ms->lock); | |
| wakeup_mirrord(ms); | |
| } else { | |
| map_bio(get_default_mirror(ms), bio); | |
| generic_make_request(bio); | |
| } | |
| } | |
| } | |
| static void do_failures(struct mirror_set *ms, struct bio_list *failures) | |
| { | |
| struct bio *bio; | |
| if (likely(!failures->head)) | |
| return; | |
| /* | |
| * If the log has failed, unattempted writes are being | |
| * put on the holds list. We can't issue those writes | |
| * until a log has been marked, so we must store them. | |
| * | |
| * If a 'noflush' suspend is in progress, we can requeue | |
| * the I/O's to the core. This give userspace a chance | |
| * to reconfigure the mirror, at which point the core | |
| * will reissue the writes. If the 'noflush' flag is | |
| * not set, we have no choice but to return errors. | |
| * | |
| * Some writes on the failures list may have been | |
| * submitted before the log failure and represent a | |
| * failure to write to one of the devices. It is ok | |
| * for us to treat them the same and requeue them | |
| * as well. | |
| */ | |
| while ((bio = bio_list_pop(failures))) { | |
| if (!ms->log_failure) { | |
| ms->in_sync = 0; | |
| dm_rh_mark_nosync(ms->rh, bio); | |
| } | |
| /* | |
| * If all the legs are dead, fail the I/O. | |
| * If the device has failed and keep_log is enabled, | |
| * fail the I/O. | |
| * | |
| * If we have been told to handle errors, and keep_log | |
| * isn't enabled, hold the bio and wait for userspace to | |
| * deal with the problem. | |
| * | |
| * Otherwise pretend that the I/O succeeded. (This would | |
| * be wrong if the failed leg returned after reboot and | |
| * got replicated back to the good legs.) | |
| */ | |
| if (unlikely(!get_valid_mirror(ms) || (keep_log(ms) && ms->log_failure))) | |
| bio_io_error(bio); | |
| else if (errors_handled(ms) && !keep_log(ms)) | |
| hold_bio(ms, bio); | |
| else | |
| bio_endio(bio); | |
| } | |
| } | |
| static void trigger_event(struct work_struct *work) | |
| { | |
| struct mirror_set *ms = | |
| container_of(work, struct mirror_set, trigger_event); | |
| dm_table_event(ms->ti->table); | |
| } | |
| /*----------------------------------------------------------------- | |
| * kmirrord | |
| *---------------------------------------------------------------*/ | |
| static void do_mirror(struct work_struct *work) | |
| { | |
| struct mirror_set *ms = container_of(work, struct mirror_set, | |
| kmirrord_work); | |
| struct bio_list reads, writes, failures; | |
| unsigned long flags; | |
| spin_lock_irqsave(&ms->lock, flags); | |
| reads = ms->reads; | |
| writes = ms->writes; | |
| failures = ms->failures; | |
| bio_list_init(&ms->reads); | |
| bio_list_init(&ms->writes); | |
| bio_list_init(&ms->failures); | |
| spin_unlock_irqrestore(&ms->lock, flags); | |
| dm_rh_update_states(ms->rh, errors_handled(ms)); | |
| do_recovery(ms); | |
| do_reads(ms, &reads); | |
| do_writes(ms, &writes); | |
| do_failures(ms, &failures); | |
| } | |
| /*----------------------------------------------------------------- | |
| * Target functions | |
| *---------------------------------------------------------------*/ | |
| static struct mirror_set *alloc_context(unsigned int nr_mirrors, | |
| uint32_t region_size, | |
| struct dm_target *ti, | |
| struct dm_dirty_log *dl) | |
| { | |
| size_t len; | |
| struct mirror_set *ms = NULL; | |
| len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors); | |
| ms = kzalloc(len, GFP_KERNEL); | |
| if (!ms) { | |
| ti->error = "Cannot allocate mirror context"; | |
| return NULL; | |
| } | |
| spin_lock_init(&ms->lock); | |
| bio_list_init(&ms->reads); | |
| bio_list_init(&ms->writes); | |
| bio_list_init(&ms->failures); | |
| bio_list_init(&ms->holds); | |
| ms->ti = ti; | |
| ms->nr_mirrors = nr_mirrors; | |
| ms->nr_regions = dm_sector_div_up(ti->len, region_size); | |
| ms->in_sync = 0; | |
| ms->log_failure = 0; | |
| ms->leg_failure = 0; | |
| atomic_set(&ms->suspend, 0); | |
| atomic_set(&ms->default_mirror, DEFAULT_MIRROR); | |
| ms->io_client = dm_io_client_create(); | |
| if (IS_ERR(ms->io_client)) { | |
| ti->error = "Error creating dm_io client"; | |
| kfree(ms); | |
| return NULL; | |
| } | |
| ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord, | |
| wakeup_all_recovery_waiters, | |
| ms->ti->begin, MAX_RECOVERY, | |
| dl, region_size, ms->nr_regions); | |
| if (IS_ERR(ms->rh)) { | |
| ti->error = "Error creating dirty region hash"; | |
| dm_io_client_destroy(ms->io_client); | |
| kfree(ms); | |
| return NULL; | |
| } | |
| return ms; | |
| } | |
| static void free_context(struct mirror_set *ms, struct dm_target *ti, | |
| unsigned int m) | |
| { | |
| while (m--) | |
| dm_put_device(ti, ms->mirror[m].dev); | |
| dm_io_client_destroy(ms->io_client); | |
| dm_region_hash_destroy(ms->rh); | |
| kfree(ms); | |
| } | |
| static int get_mirror(struct mirror_set *ms, struct dm_target *ti, | |
| unsigned int mirror, char **argv) | |
| { | |
| unsigned long long offset; | |
| char dummy; | |
| int ret; | |
| if (sscanf(argv[1], "%llu%c", &offset, &dummy) != 1) { | |
| ti->error = "Invalid offset"; | |
| return -EINVAL; | |
| } | |
| ret = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), | |
| &ms->mirror[mirror].dev); | |
| if (ret) { | |
| ti->error = "Device lookup failure"; | |
| return ret; | |
| } | |
| ms->mirror[mirror].ms = ms; | |
| atomic_set(&(ms->mirror[mirror].error_count), 0); | |
| ms->mirror[mirror].error_type = 0; | |
| ms->mirror[mirror].offset = offset; | |
| return 0; | |
| } | |
| /* | |
| * Create dirty log: log_type #log_params <log_params> | |
| */ | |
| static struct dm_dirty_log *create_dirty_log(struct dm_target *ti, | |
| unsigned argc, char **argv, | |
| unsigned *args_used) | |
| { | |
| unsigned param_count; | |
| struct dm_dirty_log *dl; | |
| char dummy; | |
| if (argc < 2) { | |
| ti->error = "Insufficient mirror log arguments"; | |
| return NULL; | |
| } | |
| if (sscanf(argv[1], "%u%c", ¶m_count, &dummy) != 1) { | |
| ti->error = "Invalid mirror log argument count"; | |
| return NULL; | |
| } | |
| *args_used = 2 + param_count; | |
| if (argc < *args_used) { | |
| ti->error = "Insufficient mirror log arguments"; | |
| return NULL; | |
| } | |
| dl = dm_dirty_log_create(argv[0], ti, mirror_flush, param_count, | |
| argv + 2); | |
| if (!dl) { | |
| ti->error = "Error creating mirror dirty log"; | |
| return NULL; | |
| } | |
| return dl; | |
| } | |
| static int parse_features(struct mirror_set *ms, unsigned argc, char **argv, | |
| unsigned *args_used) | |
| { | |
| unsigned num_features; | |
| struct dm_target *ti = ms->ti; | |
| char dummy; | |
| int i; | |
| *args_used = 0; | |
| if (!argc) | |
| return 0; | |
| if (sscanf(argv[0], "%u%c", &num_features, &dummy) != 1) { | |
| ti->error = "Invalid number of features"; | |
| return -EINVAL; | |
| } | |
| argc--; | |
| argv++; | |
| (*args_used)++; | |
| if (num_features > argc) { | |
| ti->error = "Not enough arguments to support feature count"; | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < num_features; i++) { | |
| if (!strcmp("handle_errors", argv[0])) | |
| ms->features |= DM_RAID1_HANDLE_ERRORS; | |
| else if (!strcmp("keep_log", argv[0])) | |
| ms->features |= DM_RAID1_KEEP_LOG; | |
| else { | |
| ti->error = "Unrecognised feature requested"; | |
| return -EINVAL; | |
| } | |
| argc--; | |
| argv++; | |
| (*args_used)++; | |
| } | |
| if (!errors_handled(ms) && keep_log(ms)) { | |
| ti->error = "keep_log feature requires the handle_errors feature"; | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Construct a mirror mapping: | |
| * | |
| * log_type #log_params <log_params> | |
| * #mirrors [mirror_path offset]{2,} | |
| * [#features <features>] | |
| * | |
| * log_type is "core" or "disk" | |
| * #log_params is between 1 and 3 | |
| * | |
| * If present, supported features are "handle_errors" and "keep_log". | |
| */ | |
| static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) | |
| { | |
| int r; | |
| unsigned int nr_mirrors, m, args_used; | |
| struct mirror_set *ms; | |
| struct dm_dirty_log *dl; | |
| char dummy; | |
| dl = create_dirty_log(ti, argc, argv, &args_used); | |
| if (!dl) | |
| return -EINVAL; | |
| argv += args_used; | |
| argc -= args_used; | |
| if (!argc || sscanf(argv[0], "%u%c", &nr_mirrors, &dummy) != 1 || | |
| nr_mirrors < 2 || nr_mirrors > MAX_NR_MIRRORS) { | |
| ti->error = "Invalid number of mirrors"; | |
| dm_dirty_log_destroy(dl); | |
| return -EINVAL; | |
| } | |
| argv++, argc--; | |
| if (argc < nr_mirrors * 2) { | |
| ti->error = "Too few mirror arguments"; | |
| dm_dirty_log_destroy(dl); | |
| return -EINVAL; | |
| } | |
| ms = alloc_context(nr_mirrors, dl->type->get_region_size(dl), ti, dl); | |
| if (!ms) { | |
| dm_dirty_log_destroy(dl); | |
| return -ENOMEM; | |
| } | |
| /* Get the mirror parameter sets */ | |
| for (m = 0; m < nr_mirrors; m++) { | |
| r = get_mirror(ms, ti, m, argv); | |
| if (r) { | |
| free_context(ms, ti, m); | |
| return r; | |
| } | |
| argv += 2; | |
| argc -= 2; | |
| } | |
| ti->private = ms; | |
| r = dm_set_target_max_io_len(ti, dm_rh_get_region_size(ms->rh)); | |
| if (r) | |
| goto err_free_context; | |
| ti->num_flush_bios = 1; | |
| ti->num_discard_bios = 1; | |
| ti->per_io_data_size = sizeof(struct dm_raid1_bio_record); | |
| ms->kmirrord_wq = alloc_workqueue("kmirrord", WQ_MEM_RECLAIM, 0); | |
| if (!ms->kmirrord_wq) { | |
| DMERR("couldn't start kmirrord"); | |
| r = -ENOMEM; | |
| goto err_free_context; | |
| } | |
| INIT_WORK(&ms->kmirrord_work, do_mirror); | |
| timer_setup(&ms->timer, delayed_wake_fn, 0); | |
| ms->timer_pending = 0; | |
| INIT_WORK(&ms->trigger_event, trigger_event); | |
| r = parse_features(ms, argc, argv, &args_used); | |
| if (r) | |
| goto err_destroy_wq; | |
| argv += args_used; | |
| argc -= args_used; | |
| /* | |
| * Any read-balancing addition depends on the | |
| * DM_RAID1_HANDLE_ERRORS flag being present. | |
| * This is because the decision to balance depends | |
| * on the sync state of a region. If the above | |
| * flag is not present, we ignore errors; and | |
| * the sync state may be inaccurate. | |
| */ | |
| if (argc) { | |
| ti->error = "Too many mirror arguments"; | |
| r = -EINVAL; | |
| goto err_destroy_wq; | |
| } | |
| ms->kcopyd_client = dm_kcopyd_client_create(&dm_kcopyd_throttle); | |
| if (IS_ERR(ms->kcopyd_client)) { | |
| r = PTR_ERR(ms->kcopyd_client); | |
| goto err_destroy_wq; | |
| } | |
| wakeup_mirrord(ms); | |
| return 0; | |
| err_destroy_wq: | |
| destroy_workqueue(ms->kmirrord_wq); | |
| err_free_context: | |
| free_context(ms, ti, ms->nr_mirrors); | |
| return r; | |
| } | |
| static void mirror_dtr(struct dm_target *ti) | |
| { | |
| struct mirror_set *ms = (struct mirror_set *) ti->private; | |
| del_timer_sync(&ms->timer); | |
| flush_workqueue(ms->kmirrord_wq); | |
| flush_work(&ms->trigger_event); | |
| dm_kcopyd_client_destroy(ms->kcopyd_client); | |
| destroy_workqueue(ms->kmirrord_wq); | |
| free_context(ms, ti, ms->nr_mirrors); | |
| } | |
| /* | |
| * Mirror mapping function | |
| */ | |
| static int mirror_map(struct dm_target *ti, struct bio *bio) | |
| { | |
| int r, rw = bio_data_dir(bio); | |
| struct mirror *m; | |
| struct mirror_set *ms = ti->private; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| struct dm_raid1_bio_record *bio_record = | |
| dm_per_bio_data(bio, sizeof(struct dm_raid1_bio_record)); | |
| bio_record->details.bi_disk = NULL; | |
| if (rw == WRITE) { | |
| /* Save region for mirror_end_io() handler */ | |
| bio_record->write_region = dm_rh_bio_to_region(ms->rh, bio); | |
| queue_bio(ms, bio, rw); | |
| return DM_MAPIO_SUBMITTED; | |
| } | |
| r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0); | |
| if (r < 0 && r != -EWOULDBLOCK) | |
| return DM_MAPIO_KILL; | |
| /* | |
| * If region is not in-sync queue the bio. | |
| */ | |
| if (!r || (r == -EWOULDBLOCK)) { | |
| if (bio->bi_opf & REQ_RAHEAD) | |
| return DM_MAPIO_KILL; | |
| queue_bio(ms, bio, rw); | |
| return DM_MAPIO_SUBMITTED; | |
| } | |
| /* | |
| * The region is in-sync and we can perform reads directly. | |
| * Store enough information so we can retry if it fails. | |
| */ | |
| m = choose_mirror(ms, bio->bi_iter.bi_sector); | |
| if (unlikely(!m)) | |
| return DM_MAPIO_KILL; | |
| dm_bio_record(&bio_record->details, bio); | |
| bio_record->m = m; | |
| map_bio(m, bio); | |
| return DM_MAPIO_REMAPPED; | |
| } | |
| static int mirror_end_io(struct dm_target *ti, struct bio *bio, | |
| blk_status_t *error) | |
| { | |
| int rw = bio_data_dir(bio); | |
| struct mirror_set *ms = (struct mirror_set *) ti->private; | |
| struct mirror *m = NULL; | |
| struct dm_bio_details *bd = NULL; | |
| struct dm_raid1_bio_record *bio_record = | |
| dm_per_bio_data(bio, sizeof(struct dm_raid1_bio_record)); | |
| /* | |
| * We need to dec pending if this was a write. | |
| */ | |
| if (rw == WRITE) { | |
| if (!(bio->bi_opf & REQ_PREFLUSH) && | |
| bio_op(bio) != REQ_OP_DISCARD) | |
| dm_rh_dec(ms->rh, bio_record->write_region); | |
| return DM_ENDIO_DONE; | |
| } | |
| if (*error == BLK_STS_NOTSUPP) | |
| goto out; | |
| if (bio->bi_opf & REQ_RAHEAD) | |
| goto out; | |
| if (unlikely(*error)) { | |
| if (!bio_record->details.bi_disk) { | |
| /* | |
| * There wasn't enough memory to record necessary | |
| * information for a retry or there was no other | |
| * mirror in-sync. | |
| */ | |
| DMERR_LIMIT("Mirror read failed."); | |
| return DM_ENDIO_DONE; | |
| } | |
| m = bio_record->m; | |
| DMERR("Mirror read failed from %s. Trying alternative device.", | |
| m->dev->name); | |
| fail_mirror(m, DM_RAID1_READ_ERROR); | |
| /* | |
| * A failed read is requeued for another attempt using an intact | |
| * mirror. | |
| */ | |
| if (default_ok(m) || mirror_available(ms, bio)) { | |
| bd = &bio_record->details; | |
| dm_bio_restore(bd, bio); | |
| bio_record->details.bi_disk = NULL; | |
| bio->bi_status = 0; | |
| queue_bio(ms, bio, rw); | |
| return DM_ENDIO_INCOMPLETE; | |
| } | |
| DMERR("All replicated volumes dead, failing I/O"); | |
| } | |
| out: | |
| bio_record->details.bi_disk = NULL; | |
| return DM_ENDIO_DONE; | |
| } | |
| static void mirror_presuspend(struct dm_target *ti) | |
| { | |
| struct mirror_set *ms = (struct mirror_set *) ti->private; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| struct bio_list holds; | |
| struct bio *bio; | |
| atomic_set(&ms->suspend, 1); | |
| /* | |
| * Process bios in the hold list to start recovery waiting | |
| * for bios in the hold list. After the process, no bio has | |
| * a chance to be added in the hold list because ms->suspend | |
| * is set. | |
| */ | |
| spin_lock_irq(&ms->lock); | |
| holds = ms->holds; | |
| bio_list_init(&ms->holds); | |
| spin_unlock_irq(&ms->lock); | |
| while ((bio = bio_list_pop(&holds))) | |
| hold_bio(ms, bio); | |
| /* | |
| * We must finish up all the work that we've | |
| * generated (i.e. recovery work). | |
| */ | |
| dm_rh_stop_recovery(ms->rh); | |
| wait_event(_kmirrord_recovery_stopped, | |
| !dm_rh_recovery_in_flight(ms->rh)); | |
| if (log->type->presuspend && log->type->presuspend(log)) | |
| /* FIXME: need better error handling */ | |
| DMWARN("log presuspend failed"); | |
| /* | |
| * Now that recovery is complete/stopped and the | |
| * delayed bios are queued, we need to wait for | |
| * the worker thread to complete. This way, | |
| * we know that all of our I/O has been pushed. | |
| */ | |
| flush_workqueue(ms->kmirrord_wq); | |
| } | |
| static void mirror_postsuspend(struct dm_target *ti) | |
| { | |
| struct mirror_set *ms = ti->private; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| if (log->type->postsuspend && log->type->postsuspend(log)) | |
| /* FIXME: need better error handling */ | |
| DMWARN("log postsuspend failed"); | |
| } | |
| static void mirror_resume(struct dm_target *ti) | |
| { | |
| struct mirror_set *ms = ti->private; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| atomic_set(&ms->suspend, 0); | |
| if (log->type->resume && log->type->resume(log)) | |
| /* FIXME: need better error handling */ | |
| DMWARN("log resume failed"); | |
| dm_rh_start_recovery(ms->rh); | |
| } | |
| /* | |
| * device_status_char | |
| * @m: mirror device/leg we want the status of | |
| * | |
| * We return one character representing the most severe error | |
| * we have encountered. | |
| * A => Alive - No failures | |
| * D => Dead - A write failure occurred leaving mirror out-of-sync | |
| * S => Sync - A sychronization failure occurred, mirror out-of-sync | |
| * R => Read - A read failure occurred, mirror data unaffected | |
| * | |
| * Returns: <char> | |
| */ | |
| static char device_status_char(struct mirror *m) | |
| { | |
| if (!atomic_read(&(m->error_count))) | |
| return 'A'; | |
| return (test_bit(DM_RAID1_FLUSH_ERROR, &(m->error_type))) ? 'F' : | |
| (test_bit(DM_RAID1_WRITE_ERROR, &(m->error_type))) ? 'D' : | |
| (test_bit(DM_RAID1_SYNC_ERROR, &(m->error_type))) ? 'S' : | |
| (test_bit(DM_RAID1_READ_ERROR, &(m->error_type))) ? 'R' : 'U'; | |
| } | |
| static void mirror_status(struct dm_target *ti, status_type_t type, | |
| unsigned status_flags, char *result, unsigned maxlen) | |
| { | |
| unsigned int m, sz = 0; | |
| int num_feature_args = 0; | |
| struct mirror_set *ms = (struct mirror_set *) ti->private; | |
| struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); | |
| char buffer[MAX_NR_MIRRORS + 1]; | |
| switch (type) { | |
| case STATUSTYPE_INFO: | |
| DMEMIT("%d ", ms->nr_mirrors); | |
| for (m = 0; m < ms->nr_mirrors; m++) { | |
| DMEMIT("%s ", ms->mirror[m].dev->name); | |
| buffer[m] = device_status_char(&(ms->mirror[m])); | |
| } | |
| buffer[m] = '\0'; | |
| DMEMIT("%llu/%llu 1 %s ", | |
| (unsigned long long)log->type->get_sync_count(log), | |
| (unsigned long long)ms->nr_regions, buffer); | |
| sz += log->type->status(log, type, result+sz, maxlen-sz); | |
| break; | |
| case STATUSTYPE_TABLE: | |
| sz = log->type->status(log, type, result, maxlen); | |
| DMEMIT("%d", ms->nr_mirrors); | |
| for (m = 0; m < ms->nr_mirrors; m++) | |
| DMEMIT(" %s %llu", ms->mirror[m].dev->name, | |
| (unsigned long long)ms->mirror[m].offset); | |
| num_feature_args += !!errors_handled(ms); | |
| num_feature_args += !!keep_log(ms); | |
| if (num_feature_args) { | |
| DMEMIT(" %d", num_feature_args); | |
| if (errors_handled(ms)) | |
| DMEMIT(" handle_errors"); | |
| if (keep_log(ms)) | |
| DMEMIT(" keep_log"); | |
| } | |
| break; | |
| } | |
| } | |
| static int mirror_iterate_devices(struct dm_target *ti, | |
| iterate_devices_callout_fn fn, void *data) | |
| { | |
| struct mirror_set *ms = ti->private; | |
| int ret = 0; | |
| unsigned i; | |
| for (i = 0; !ret && i < ms->nr_mirrors; i++) | |
| ret = fn(ti, ms->mirror[i].dev, | |
| ms->mirror[i].offset, ti->len, data); | |
| return ret; | |
| } | |
| static struct target_type mirror_target = { | |
| .name = "mirror", | |
| .version = {1, 14, 0}, | |
| .module = THIS_MODULE, | |
| .ctr = mirror_ctr, | |
| .dtr = mirror_dtr, | |
| .map = mirror_map, | |
| .end_io = mirror_end_io, | |
| .presuspend = mirror_presuspend, | |
| .postsuspend = mirror_postsuspend, | |
| .resume = mirror_resume, | |
| .status = mirror_status, | |
| .iterate_devices = mirror_iterate_devices, | |
| }; | |
| static int __init dm_mirror_init(void) | |
| { | |
| int r; | |
| r = dm_register_target(&mirror_target); | |
| if (r < 0) { | |
| DMERR("Failed to register mirror target"); | |
| goto bad_target; | |
| } | |
| return 0; | |
| bad_target: | |
| return r; | |
| } | |
| static void __exit dm_mirror_exit(void) | |
| { | |
| dm_unregister_target(&mirror_target); | |
| } | |
| /* Module hooks */ | |
| module_init(dm_mirror_init); | |
| module_exit(dm_mirror_exit); | |
| MODULE_DESCRIPTION(DM_NAME " mirror target"); | |
| MODULE_AUTHOR("Joe Thornber"); | |
| MODULE_LICENSE("GPL"); |