| /* | |
| * PXA930 track ball mouse driver | |
| * | |
| * Copyright (C) 2007 Marvell International Ltd. | |
| * 2008-02-28: Yong Yao <yaoyong@marvell.com> | |
| * initial version | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/input.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/slab.h> | |
| #include <mach/hardware.h> | |
| #include <linux/platform_data/mouse-pxa930_trkball.h> | |
| /* Trackball Controller Register Definitions */ | |
| #define TBCR (0x000C) | |
| #define TBCNTR (0x0010) | |
| #define TBSBC (0x0014) | |
| #define TBCR_TBRST (1 << 1) | |
| #define TBCR_TBSB (1 << 10) | |
| #define TBCR_Y_FLT(n) (((n) & 0xf) << 6) | |
| #define TBCR_X_FLT(n) (((n) & 0xf) << 2) | |
| #define TBCNTR_YM(n) (((n) >> 24) & 0xff) | |
| #define TBCNTR_YP(n) (((n) >> 16) & 0xff) | |
| #define TBCNTR_XM(n) (((n) >> 8) & 0xff) | |
| #define TBCNTR_XP(n) ((n) & 0xff) | |
| #define TBSBC_TBSBC (0x1) | |
| struct pxa930_trkball { | |
| struct pxa930_trkball_platform_data *pdata; | |
| /* Memory Mapped Register */ | |
| struct resource *mem; | |
| void __iomem *mmio_base; | |
| struct input_dev *input; | |
| }; | |
| static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id) | |
| { | |
| struct pxa930_trkball *trkball = dev_id; | |
| struct input_dev *input = trkball->input; | |
| int tbcntr, x, y; | |
| /* According to the spec software must read TBCNTR twice: | |
| * if the read value is the same, the reading is valid | |
| */ | |
| tbcntr = __raw_readl(trkball->mmio_base + TBCNTR); | |
| if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) { | |
| x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2; | |
| y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2; | |
| input_report_rel(input, REL_X, x); | |
| input_report_rel(input, REL_Y, y); | |
| input_sync(input); | |
| } | |
| __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | |
| __raw_writel(0, trkball->mmio_base + TBSBC); | |
| return IRQ_HANDLED; | |
| } | |
| /* For TBCR, we need to wait for a while to make sure it has been modified. */ | |
| static int write_tbcr(struct pxa930_trkball *trkball, int v) | |
| { | |
| int i = 100; | |
| __raw_writel(v, trkball->mmio_base + TBCR); | |
| while (--i) { | |
| if (__raw_readl(trkball->mmio_base + TBCR) == v) | |
| break; | |
| msleep(1); | |
| } | |
| if (i == 0) { | |
| pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v); | |
| return -ETIMEDOUT; | |
| } | |
| return 0; | |
| } | |
| static void pxa930_trkball_config(struct pxa930_trkball *trkball) | |
| { | |
| uint32_t tbcr; | |
| /* According to spec, need to write the filters of x,y to 0xf first! */ | |
| tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
| write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf)); | |
| write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) | | |
| TBCR_Y_FLT(trkball->pdata->y_filter)); | |
| /* According to spec, set TBCR_TBRST first, before clearing it! */ | |
| tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
| write_tbcr(trkball, tbcr | TBCR_TBRST); | |
| write_tbcr(trkball, tbcr & ~TBCR_TBRST); | |
| __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | |
| __raw_writel(0, trkball->mmio_base + TBSBC); | |
| pr_debug("%s: final TBCR=%x!\n", __func__, | |
| __raw_readl(trkball->mmio_base + TBCR)); | |
| } | |
| static int pxa930_trkball_open(struct input_dev *dev) | |
| { | |
| struct pxa930_trkball *trkball = input_get_drvdata(dev); | |
| pxa930_trkball_config(trkball); | |
| return 0; | |
| } | |
| static void pxa930_trkball_disable(struct pxa930_trkball *trkball) | |
| { | |
| uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
| /* Held in reset, gate the 32-KHz input clock off */ | |
| write_tbcr(trkball, tbcr | TBCR_TBRST); | |
| } | |
| static void pxa930_trkball_close(struct input_dev *dev) | |
| { | |
| struct pxa930_trkball *trkball = input_get_drvdata(dev); | |
| pxa930_trkball_disable(trkball); | |
| } | |
| static int pxa930_trkball_probe(struct platform_device *pdev) | |
| { | |
| struct pxa930_trkball *trkball; | |
| struct input_dev *input; | |
| struct resource *res; | |
| int irq, error; | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "failed to get trkball irq\n"); | |
| return -ENXIO; | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "failed to get register memory\n"); | |
| return -ENXIO; | |
| } | |
| trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL); | |
| if (!trkball) | |
| return -ENOMEM; | |
| trkball->pdata = dev_get_platdata(&pdev->dev); | |
| if (!trkball->pdata) { | |
| dev_err(&pdev->dev, "no platform data defined\n"); | |
| error = -EINVAL; | |
| goto failed; | |
| } | |
| trkball->mmio_base = ioremap_nocache(res->start, resource_size(res)); | |
| if (!trkball->mmio_base) { | |
| dev_err(&pdev->dev, "failed to ioremap registers\n"); | |
| error = -ENXIO; | |
| goto failed; | |
| } | |
| /* held the module in reset, will be enabled in open() */ | |
| pxa930_trkball_disable(trkball); | |
| error = request_irq(irq, pxa930_trkball_interrupt, 0, | |
| pdev->name, trkball); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to request irq: %d\n", error); | |
| goto failed_free_io; | |
| } | |
| platform_set_drvdata(pdev, trkball); | |
| input = input_allocate_device(); | |
| if (!input) { | |
| dev_err(&pdev->dev, "failed to allocate input device\n"); | |
| error = -ENOMEM; | |
| goto failed_free_irq; | |
| } | |
| input->name = pdev->name; | |
| input->id.bustype = BUS_HOST; | |
| input->open = pxa930_trkball_open; | |
| input->close = pxa930_trkball_close; | |
| input->dev.parent = &pdev->dev; | |
| input_set_drvdata(input, trkball); | |
| trkball->input = input; | |
| input_set_capability(input, EV_REL, REL_X); | |
| input_set_capability(input, EV_REL, REL_Y); | |
| error = input_register_device(input); | |
| if (error) { | |
| dev_err(&pdev->dev, "unable to register input device\n"); | |
| goto failed_free_input; | |
| } | |
| return 0; | |
| failed_free_input: | |
| input_free_device(input); | |
| failed_free_irq: | |
| free_irq(irq, trkball); | |
| failed_free_io: | |
| iounmap(trkball->mmio_base); | |
| failed: | |
| kfree(trkball); | |
| return error; | |
| } | |
| static int pxa930_trkball_remove(struct platform_device *pdev) | |
| { | |
| struct pxa930_trkball *trkball = platform_get_drvdata(pdev); | |
| int irq = platform_get_irq(pdev, 0); | |
| input_unregister_device(trkball->input); | |
| free_irq(irq, trkball); | |
| iounmap(trkball->mmio_base); | |
| kfree(trkball); | |
| return 0; | |
| } | |
| static struct platform_driver pxa930_trkball_driver = { | |
| .driver = { | |
| .name = "pxa930-trkball", | |
| }, | |
| .probe = pxa930_trkball_probe, | |
| .remove = pxa930_trkball_remove, | |
| }; | |
| module_platform_driver(pxa930_trkball_driver); | |
| MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); | |
| MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); | |
| MODULE_LICENSE("GPL"); |