| /* | |
| * Touchkey driver for MELFAS MCS5000/5080 controller | |
| * | |
| * Copyright (C) 2010 Samsung Electronics Co.Ltd | |
| * Author: HeungJun Kim <riverful.kim@samsung.com> | |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/input.h> | |
| #include <linux/irq.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_data/mcs.h> | |
| #include <linux/pm.h> | |
| /* MCS5000 Touchkey */ | |
| #define MCS5000_TOUCHKEY_STATUS 0x04 | |
| #define MCS5000_TOUCHKEY_STATUS_PRESS 7 | |
| #define MCS5000_TOUCHKEY_FW 0x0a | |
| #define MCS5000_TOUCHKEY_BASE_VAL 0x61 | |
| /* MCS5080 Touchkey */ | |
| #define MCS5080_TOUCHKEY_STATUS 0x00 | |
| #define MCS5080_TOUCHKEY_STATUS_PRESS 3 | |
| #define MCS5080_TOUCHKEY_FW 0x01 | |
| #define MCS5080_TOUCHKEY_BASE_VAL 0x1 | |
| enum mcs_touchkey_type { | |
| MCS5000_TOUCHKEY, | |
| MCS5080_TOUCHKEY, | |
| }; | |
| struct mcs_touchkey_chip { | |
| unsigned int status_reg; | |
| unsigned int pressbit; | |
| unsigned int press_invert; | |
| unsigned int baseval; | |
| }; | |
| struct mcs_touchkey_data { | |
| void (*poweron)(bool); | |
| struct i2c_client *client; | |
| struct input_dev *input_dev; | |
| struct mcs_touchkey_chip chip; | |
| unsigned int key_code; | |
| unsigned int key_val; | |
| unsigned short keycodes[]; | |
| }; | |
| static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) | |
| { | |
| struct mcs_touchkey_data *data = dev_id; | |
| struct mcs_touchkey_chip *chip = &data->chip; | |
| struct i2c_client *client = data->client; | |
| struct input_dev *input = data->input_dev; | |
| unsigned int key_val; | |
| unsigned int pressed; | |
| int val; | |
| val = i2c_smbus_read_byte_data(client, chip->status_reg); | |
| if (val < 0) { | |
| dev_err(&client->dev, "i2c read error [%d]\n", val); | |
| goto out; | |
| } | |
| pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; | |
| if (chip->press_invert) | |
| pressed ^= chip->press_invert; | |
| /* key_val is 0 when released, so we should use key_val of press. */ | |
| if (pressed) { | |
| key_val = val & (0xff >> (8 - chip->pressbit)); | |
| if (!key_val) | |
| goto out; | |
| key_val -= chip->baseval; | |
| data->key_code = data->keycodes[key_val]; | |
| data->key_val = key_val; | |
| } | |
| input_event(input, EV_MSC, MSC_SCAN, data->key_val); | |
| input_report_key(input, data->key_code, pressed); | |
| input_sync(input); | |
| dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, | |
| pressed ? "pressed" : "released"); | |
| out: | |
| return IRQ_HANDLED; | |
| } | |
| static int mcs_touchkey_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| const struct mcs_platform_data *pdata; | |
| struct mcs_touchkey_data *data; | |
| struct input_dev *input_dev; | |
| unsigned int fw_reg; | |
| int fw_ver; | |
| int error; | |
| int i; | |
| pdata = dev_get_platdata(&client->dev); | |
| if (!pdata) { | |
| dev_err(&client->dev, "no platform data defined\n"); | |
| return -EINVAL; | |
| } | |
| data = kzalloc(sizeof(struct mcs_touchkey_data) + | |
| sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), | |
| GFP_KERNEL); | |
| input_dev = input_allocate_device(); | |
| if (!data || !input_dev) { | |
| dev_err(&client->dev, "Failed to allocate memory\n"); | |
| error = -ENOMEM; | |
| goto err_free_mem; | |
| } | |
| data->client = client; | |
| data->input_dev = input_dev; | |
| if (id->driver_data == MCS5000_TOUCHKEY) { | |
| data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; | |
| data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; | |
| data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; | |
| fw_reg = MCS5000_TOUCHKEY_FW; | |
| } else { | |
| data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; | |
| data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; | |
| data->chip.press_invert = 1; | |
| data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; | |
| fw_reg = MCS5080_TOUCHKEY_FW; | |
| } | |
| fw_ver = i2c_smbus_read_byte_data(client, fw_reg); | |
| if (fw_ver < 0) { | |
| error = fw_ver; | |
| dev_err(&client->dev, "i2c read error[%d]\n", error); | |
| goto err_free_mem; | |
| } | |
| dev_info(&client->dev, "Firmware version: %d\n", fw_ver); | |
| input_dev->name = "MELFAS MCS Touchkey"; | |
| input_dev->id.bustype = BUS_I2C; | |
| input_dev->dev.parent = &client->dev; | |
| input_dev->evbit[0] = BIT_MASK(EV_KEY); | |
| if (!pdata->no_autorepeat) | |
| input_dev->evbit[0] |= BIT_MASK(EV_REP); | |
| input_dev->keycode = data->keycodes; | |
| input_dev->keycodesize = sizeof(data->keycodes[0]); | |
| input_dev->keycodemax = pdata->key_maxval + 1; | |
| for (i = 0; i < pdata->keymap_size; i++) { | |
| unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); | |
| unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); | |
| data->keycodes[val] = code; | |
| __set_bit(code, input_dev->keybit); | |
| } | |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); | |
| input_set_drvdata(input_dev, data); | |
| if (pdata->cfg_pin) | |
| pdata->cfg_pin(); | |
| if (pdata->poweron) { | |
| data->poweron = pdata->poweron; | |
| data->poweron(true); | |
| } | |
| error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, | |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | |
| client->dev.driver->name, data); | |
| if (error) { | |
| dev_err(&client->dev, "Failed to register interrupt\n"); | |
| goto err_free_mem; | |
| } | |
| error = input_register_device(input_dev); | |
| if (error) | |
| goto err_free_irq; | |
| i2c_set_clientdata(client, data); | |
| return 0; | |
| err_free_irq: | |
| free_irq(client->irq, data); | |
| err_free_mem: | |
| input_free_device(input_dev); | |
| kfree(data); | |
| return error; | |
| } | |
| static int mcs_touchkey_remove(struct i2c_client *client) | |
| { | |
| struct mcs_touchkey_data *data = i2c_get_clientdata(client); | |
| free_irq(client->irq, data); | |
| if (data->poweron) | |
| data->poweron(false); | |
| input_unregister_device(data->input_dev); | |
| kfree(data); | |
| return 0; | |
| } | |
| static void mcs_touchkey_shutdown(struct i2c_client *client) | |
| { | |
| struct mcs_touchkey_data *data = i2c_get_clientdata(client); | |
| if (data->poweron) | |
| data->poweron(false); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int mcs_touchkey_suspend(struct device *dev) | |
| { | |
| struct mcs_touchkey_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| /* Disable the work */ | |
| disable_irq(client->irq); | |
| /* Finally turn off the power */ | |
| if (data->poweron) | |
| data->poweron(false); | |
| return 0; | |
| } | |
| static int mcs_touchkey_resume(struct device *dev) | |
| { | |
| struct mcs_touchkey_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| /* Enable the device first */ | |
| if (data->poweron) | |
| data->poweron(true); | |
| /* Enable irq again */ | |
| enable_irq(client->irq); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, | |
| mcs_touchkey_suspend, mcs_touchkey_resume); | |
| static const struct i2c_device_id mcs_touchkey_id[] = { | |
| { "mcs5000_touchkey", MCS5000_TOUCHKEY }, | |
| { "mcs5080_touchkey", MCS5080_TOUCHKEY }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); | |
| static struct i2c_driver mcs_touchkey_driver = { | |
| .driver = { | |
| .name = "mcs_touchkey", | |
| .pm = &mcs_touchkey_pm_ops, | |
| }, | |
| .probe = mcs_touchkey_probe, | |
| .remove = mcs_touchkey_remove, | |
| .shutdown = mcs_touchkey_shutdown, | |
| .id_table = mcs_touchkey_id, | |
| }; | |
| module_i2c_driver(mcs_touchkey_driver); | |
| /* Module information */ | |
| MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); | |
| MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); | |
| MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); | |
| MODULE_LICENSE("GPL"); |