drivers/regulator/helpers.c - third_party/linux - Git at Google

 /*
  * helpers.c  --  Voltage/Current Regulator framework helper functions.
  *
  * Copyright 2007, 2008 Wolfson Microelectronics PLC.
  * Copyright 2008 SlimLogic Ltd.
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
  */

 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/module.h>

 /**
  * regulator_is_enabled_regmap - standard is_enabled() for regmap users
  *
  * @rdev: regulator to operate on
  *
  * Regulators that use regmap for their register I/O can set the
  * enable_reg and enable_mask fields in their descriptor and then use
  * this as their is_enabled operation, saving some code.
  */
 int regulator_is_enabled_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 	int ret;

 	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 	if (ret != 0)
 		return ret;

 	val &= rdev->desc->enable_mask;

 	if (rdev->desc->enable_is_inverted) {
 		if (rdev->desc->enable_val)
 			return val != rdev->desc->enable_val;
 		return val == 0;
 	} else {
 		if (rdev->desc->enable_val)
 			return val == rdev->desc->enable_val;
 		return val != 0;
 	}
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);

 /**
  * regulator_enable_regmap - standard enable() for regmap users
  *
  * @rdev: regulator to operate on
  *
  * Regulators that use regmap for their register I/O can set the
  * enable_reg and enable_mask fields in their descriptor and then use
  * this as their enable() operation, saving some code.
  */
 int regulator_enable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;

 	if (rdev->desc->enable_is_inverted) {
 		val = rdev->desc->disable_val;
 	} else {
 		val = rdev->desc->enable_val;
 		if (!val)
 			val = rdev->desc->enable_mask;
 	}

 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_enable_regmap);

 /**
  * regulator_disable_regmap - standard disable() for regmap users
  *
  * @rdev: regulator to operate on
  *
  * Regulators that use regmap for their register I/O can set the
  * enable_reg and enable_mask fields in their descriptor and then use
  * this as their disable() operation, saving some code.
  */
 int regulator_disable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;

 	if (rdev->desc->enable_is_inverted) {
 		val = rdev->desc->enable_val;
 		if (!val)
 			val = rdev->desc->enable_mask;
 	} else {
 		val = rdev->desc->disable_val;
 	}

 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_disable_regmap);

 /**
  * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
  *
  * @rdev: regulator to operate on
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
  * as their get_voltage_vsel operation, saving some code.
  */
 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 	int ret;

 	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
 	if (ret != 0)
 		return ret;

 	val &= rdev->desc->vsel_mask;
 	val >>= ffs(rdev->desc->vsel_mask) - 1;

 	return val;
 }
 EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);

 /**
  * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
  *
  * @rdev: regulator to operate on
  * @sel: Selector to set
  *
  * Regulators that use regmap for their register I/O can set the
  * vsel_reg and vsel_mask fields in their descriptor and then use this
  * as their set_voltage_vsel operation, saving some code.
  */
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
 {
 	int ret;

 	sel <<= ffs(rdev->desc->vsel_mask) - 1;

 	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
 				  rdev->desc->vsel_mask, sel);
 	if (ret)
 		return ret;

 	if (rdev->desc->apply_bit)
 		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
 					 rdev->desc->apply_bit,
 					 rdev->desc->apply_bit);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);

 /**
  * regulator_map_voltage_iterate - map_voltage() based on list_voltage()
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
  * @max_uV: Upper bound for voltage
  *
  * Drivers implementing set_voltage_sel() and list_voltage() can use
  * this as their map_voltage() operation.  It will find a suitable
  * voltage by calling list_voltage() until it gets something in bounds
  * for the requested voltages.
  */
 int regulator_map_voltage_iterate(struct regulator_dev *rdev,
 				  int min_uV, int max_uV)
 {
 	int best_val = INT_MAX;
 	int selector = 0;
 	int i, ret;

 	/* Find the smallest voltage that falls within the specified
 	 * range.
 	 */
 	for (i = 0; i < rdev->desc->n_voltages; i++) {
 		ret = rdev->desc->ops->list_voltage(rdev, i);
 		if (ret < 0)
 			continue;

 		if (ret < best_val && ret >= min_uV && ret <= max_uV) {
 			best_val = ret;
 			selector = i;
 		}
 	}

 	if (best_val != INT_MAX)
 		return selector;
 	else
 		return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);

 /**
  * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
  * @max_uV: Upper bound for voltage
  *
  * Drivers that have ascendant voltage list can use this as their
  * map_voltage() operation.
  */
 int regulator_map_voltage_ascend(struct regulator_dev *rdev,
 				 int min_uV, int max_uV)
 {
 	int i, ret;

 	for (i = 0; i < rdev->desc->n_voltages; i++) {
 		ret = rdev->desc->ops->list_voltage(rdev, i);
 		if (ret < 0)
 			continue;

 		if (ret > max_uV)
 			break;

 		if (ret >= min_uV && ret <= max_uV)
 			return i;
 	}

 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);

 /**
  * regulator_map_voltage_linear - map_voltage() for simple linear mappings
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
  * @max_uV: Upper bound for voltage
  *
  * Drivers providing min_uV and uV_step in their regulator_desc can
  * use this as their map_voltage() operation.
  */
 int regulator_map_voltage_linear(struct regulator_dev *rdev,
 				 int min_uV, int max_uV)
 {
 	int ret, voltage;

 	/* Allow uV_step to be 0 for fixed voltage */
 	if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
 		if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
 			return 0;
 		else
 			return -EINVAL;
 	}

 	if (!rdev->desc->uV_step) {
 		BUG_ON(!rdev->desc->uV_step);
 		return -EINVAL;
 	}

 	if (min_uV < rdev->desc->min_uV)
 		min_uV = rdev->desc->min_uV;

 	ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
 	if (ret < 0)
 		return ret;

 	ret += rdev->desc->linear_min_sel;

 	/* Map back into a voltage to verify we're still in bounds */
 	voltage = rdev->desc->ops->list_voltage(rdev, ret);
 	if (voltage < min_uV || voltage > max_uV)
 		return -EINVAL;

 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);

 /**
  * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
  * @max_uV: Upper bound for voltage
  *
  * Drivers providing linear_ranges in their descriptor can use this as
  * their map_voltage() callback.
  */
 int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 				       int min_uV, int max_uV)
 {
 	const struct regulator_linear_range *range;
 	int ret = -EINVAL;
 	int voltage, i;

 	if (!rdev->desc->n_linear_ranges) {
 		BUG_ON(!rdev->desc->n_linear_ranges);
 		return -EINVAL;
 	}

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
 		int linear_max_uV;

 		range = &rdev->desc->linear_ranges[i];
 		linear_max_uV = range->min_uV +
 			(range->max_sel - range->min_sel) * range->uV_step;

 		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
 			continue;

 		if (min_uV <= range->min_uV)
 			min_uV = range->min_uV;

 		/* range->uV_step == 0 means fixed voltage range */
 		if (range->uV_step == 0) {
 			ret = 0;
 		} else {
 			ret = DIV_ROUND_UP(min_uV - range->min_uV,
 					   range->uV_step);
 			if (ret < 0)
 				return ret;
 		}

 		ret += range->min_sel;

 		break;
 	}

 	if (i == rdev->desc->n_linear_ranges)
 		return -EINVAL;

 	/* Map back into a voltage to verify we're still in bounds */
 	voltage = rdev->desc->ops->list_voltage(rdev, ret);
 	if (voltage < min_uV || voltage > max_uV)
 		return -EINVAL;

 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);

 /**
  * regulator_list_voltage_linear - List voltages with simple calculation
  *
  * @rdev: Regulator device
  * @selector: Selector to convert into a voltage
  *
  * Regulators with a simple linear mapping between voltages and
  * selectors can set min_uV and uV_step in the regulator descriptor
  * and then use this function as their list_voltage() operation,
  */
 int regulator_list_voltage_linear(struct regulator_dev *rdev,
 				  unsigned int selector)
 {
 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 	if (selector < rdev->desc->linear_min_sel)
 		return 0;

 	selector -= rdev->desc->linear_min_sel;

 	return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);

 /**
  * regulator_list_voltage_linear_range - List voltages for linear ranges
  *
  * @rdev: Regulator device
  * @selector: Selector to convert into a voltage
  *
  * Regulators with a series of simple linear mappings between voltages
  * and selectors can set linear_ranges in the regulator descriptor and
  * then use this function as their list_voltage() operation,
  */
 int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
 					unsigned int selector)
 {
 	const struct regulator_linear_range *range;
 	int i;

 	if (!rdev->desc->n_linear_ranges) {
 		BUG_ON(!rdev->desc->n_linear_ranges);
 		return -EINVAL;
 	}

 	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
 		range = &rdev->desc->linear_ranges[i];

 		if (!(selector >= range->min_sel &&
 		      selector <= range->max_sel))
 			continue;

 		selector -= range->min_sel;

 		return range->min_uV + (range->uV_step * selector);
 	}

 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);

 /**
  * regulator_list_voltage_table - List voltages with table based mapping
  *
  * @rdev: Regulator device
  * @selector: Selector to convert into a voltage
  *
  * Regulators with table based mapping between voltages and
  * selectors can set volt_table in the regulator descriptor
  * and then use this function as their list_voltage() operation.
  */
 int regulator_list_voltage_table(struct regulator_dev *rdev,
 				 unsigned int selector)
 {
 	if (!rdev->desc->volt_table) {
 		BUG_ON(!rdev->desc->volt_table);
 		return -EINVAL;
 	}

 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;

 	return rdev->desc->volt_table[selector];
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage_table);

 /**
  * regulator_set_bypass_regmap - Default set_bypass() using regmap
  *
  * @rdev: device to operate on.
  * @enable: state to set.
  */
 int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
 {
 	unsigned int val;

 	if (enable) {
 		val = rdev->desc->bypass_val_on;
 		if (!val)
 			val = rdev->desc->bypass_mask;
 	} else {
 		val = rdev->desc->bypass_val_off;
 	}

 	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
 				  rdev->desc->bypass_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);

 /**
  * regulator_set_soft_start_regmap - Default set_soft_start() using regmap
  *
  * @rdev: device to operate on.
  */
 int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;

 	val = rdev->desc->soft_start_val_on;
 	if (!val)
 		val = rdev->desc->soft_start_mask;

 	return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg,
 				  rdev->desc->soft_start_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);

 /**
  * regulator_set_pull_down_regmap - Default set_pull_down() using regmap
  *
  * @rdev: device to operate on.
  */
 int regulator_set_pull_down_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;

 	val = rdev->desc->pull_down_val_on;
 	if (!val)
 		val = rdev->desc->pull_down_mask;

 	return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg,
 				  rdev->desc->pull_down_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap);

 /**
  * regulator_get_bypass_regmap - Default get_bypass() using regmap
  *
  * @rdev: device to operate on.
  * @enable: current state.
  */
 int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
 {
 	unsigned int val;
 	unsigned int val_on = rdev->desc->bypass_val_on;
 	int ret;

 	ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
 	if (ret != 0)
 		return ret;

 	if (!val_on)
 		val_on = rdev->desc->bypass_mask;

 	*enable = (val & rdev->desc->bypass_mask) == val_on;

 	return 0;
 }
 EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);

 /**
  * regulator_set_active_discharge_regmap - Default set_active_discharge()
  *					   using regmap
  *
  * @rdev: device to operate on.
  * @enable: state to set, 0 to disable and 1 to enable.
  */
 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
 					  bool enable)
 {
 	unsigned int val;

 	if (enable)
 		val = rdev->desc->active_discharge_on;
 	else
 		val = rdev->desc->active_discharge_off;

 	return regmap_update_bits(rdev->regmap,
 				  rdev->desc->active_discharge_reg,
 				  rdev->desc->active_discharge_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
	/*
	* helpers.c -- Voltage/Current Regulator framework helper functions.
	*
	* Copyright 2007, 2008 Wolfson Microelectronics PLC.
	* Copyright 2008 SlimLogic Ltd.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	*/

	#include <linux/kernel.h>
	#include <linux/err.h>
	#include <linux/delay.h>
	#include <linux/regmap.h>
	#include <linux/regulator/consumer.h>
	#include <linux/regulator/driver.h>
	#include <linux/module.h>

	/**
	* regulator_is_enabled_regmap - standard is_enabled() for regmap users
	*
	* @rdev: regulator to operate on
	*
	* Regulators that use regmap for their register I/O can set the
	* enable_reg and enable_mask fields in their descriptor and then use
	* this as their is_enabled operation, saving some code.
	*/
	int regulator_is_enabled_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;
	int ret;

	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
	if (ret != 0)
	return ret;

	val &= rdev->desc->enable_mask;

	if (rdev->desc->enable_is_inverted) {
	if (rdev->desc->enable_val)
	return val != rdev->desc->enable_val;
	return val == 0;
	} else {
	if (rdev->desc->enable_val)
	return val == rdev->desc->enable_val;
	return val != 0;
	}
	}
	EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);

	/**
	* regulator_enable_regmap - standard enable() for regmap users
	*
	* @rdev: regulator to operate on
	*
	* Regulators that use regmap for their register I/O can set the
	* enable_reg and enable_mask fields in their descriptor and then use
	* this as their enable() operation, saving some code.
	*/
	int regulator_enable_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;

	if (rdev->desc->enable_is_inverted) {
	val = rdev->desc->disable_val;
	} else {
	val = rdev->desc->enable_val;
	if (!val)
	val = rdev->desc->enable_mask;
	}

	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
	rdev->desc->enable_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_enable_regmap);

	/**
	* regulator_disable_regmap - standard disable() for regmap users
	*
	* @rdev: regulator to operate on
	*
	* Regulators that use regmap for their register I/O can set the
	* enable_reg and enable_mask fields in their descriptor and then use
	* this as their disable() operation, saving some code.
	*/
	int regulator_disable_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;

	if (rdev->desc->enable_is_inverted) {
	val = rdev->desc->enable_val;
	if (!val)
	val = rdev->desc->enable_mask;
	} else {
	val = rdev->desc->disable_val;
	}

	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
	rdev->desc->enable_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_disable_regmap);

	/**
	* regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
	*
	* @rdev: regulator to operate on
	*
	* Regulators that use regmap for their register I/O can set the
	* vsel_reg and vsel_mask fields in their descriptor and then use this
	* as their get_voltage_vsel operation, saving some code.
	*/
	int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;
	int ret;

	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
	if (ret != 0)
	return ret;

	val &= rdev->desc->vsel_mask;
	val >>= ffs(rdev->desc->vsel_mask) - 1;

	return val;
	}
	EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);

	/**
	* regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
	*
	* @rdev: regulator to operate on
	* @sel: Selector to set
	*
	* Regulators that use regmap for their register I/O can set the
	* vsel_reg and vsel_mask fields in their descriptor and then use this
	* as their set_voltage_vsel operation, saving some code.
	*/
	int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
	{
	int ret;

	sel <<= ffs(rdev->desc->vsel_mask) - 1;

	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
	rdev->desc->vsel_mask, sel);
	if (ret)
	return ret;

	if (rdev->desc->apply_bit)
	ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
	rdev->desc->apply_bit,
	rdev->desc->apply_bit);
	return ret;
	}
	EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);

	/**
	* regulator_map_voltage_iterate - map_voltage() based on list_voltage()
	*
	* @rdev: Regulator to operate on
	* @min_uV: Lower bound for voltage
	* @max_uV: Upper bound for voltage
	*
	* Drivers implementing set_voltage_sel() and list_voltage() can use
	* this as their map_voltage() operation. It will find a suitable
	* voltage by calling list_voltage() until it gets something in bounds
	* for the requested voltages.
	*/
	int regulator_map_voltage_iterate(struct regulator_dev *rdev,
	int min_uV, int max_uV)
	{
	int best_val = INT_MAX;
	int selector = 0;
	int i, ret;

	/* Find the smallest voltage that falls within the specified
	* range.
	*/
	for (i = 0; i < rdev->desc->n_voltages; i++) {
	ret = rdev->desc->ops->list_voltage(rdev, i);
	if (ret < 0)
	continue;

	if (ret < best_val && ret >= min_uV && ret <= max_uV) {
	best_val = ret;
	selector = i;
	}
	}

	if (best_val != INT_MAX)
	return selector;
	else
	return -EINVAL;
	}
	EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);

	/**
	* regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
	*
	* @rdev: Regulator to operate on
	* @min_uV: Lower bound for voltage
	* @max_uV: Upper bound for voltage
	*
	* Drivers that have ascendant voltage list can use this as their
	* map_voltage() operation.
	*/
	int regulator_map_voltage_ascend(struct regulator_dev *rdev,
	int min_uV, int max_uV)
	{
	int i, ret;

	for (i = 0; i < rdev->desc->n_voltages; i++) {
	ret = rdev->desc->ops->list_voltage(rdev, i);
	if (ret < 0)
	continue;

	if (ret > max_uV)
	break;

	if (ret >= min_uV && ret <= max_uV)
	return i;
	}

	return -EINVAL;
	}
	EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);

	/**
	* regulator_map_voltage_linear - map_voltage() for simple linear mappings
	*
	* @rdev: Regulator to operate on
	* @min_uV: Lower bound for voltage
	* @max_uV: Upper bound for voltage
	*
	* Drivers providing min_uV and uV_step in their regulator_desc can
	* use this as their map_voltage() operation.
	*/
	int regulator_map_voltage_linear(struct regulator_dev *rdev,
	int min_uV, int max_uV)
	{
	int ret, voltage;

	/* Allow uV_step to be 0 for fixed voltage */
	if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
	if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
	return 0;
	else
	return -EINVAL;
	}

	if (!rdev->desc->uV_step) {
	BUG_ON(!rdev->desc->uV_step);
	return -EINVAL;
	}

	if (min_uV < rdev->desc->min_uV)
	min_uV = rdev->desc->min_uV;

	ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
	if (ret < 0)
	return ret;

	ret += rdev->desc->linear_min_sel;

	/* Map back into a voltage to verify we're still in bounds */
	voltage = rdev->desc->ops->list_voltage(rdev, ret);
	if (voltage < min_uV \|\| voltage > max_uV)
	return -EINVAL;

	return ret;
	}
	EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);

	/**
	* regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
	*
	* @rdev: Regulator to operate on
	* @min_uV: Lower bound for voltage
	* @max_uV: Upper bound for voltage
	*
	* Drivers providing linear_ranges in their descriptor can use this as
	* their map_voltage() callback.
	*/
	int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
	int min_uV, int max_uV)
	{
	const struct regulator_linear_range *range;
	int ret = -EINVAL;
	int voltage, i;

	if (!rdev->desc->n_linear_ranges) {
	BUG_ON(!rdev->desc->n_linear_ranges);
	return -EINVAL;
	}

	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
	int linear_max_uV;

	range = &rdev->desc->linear_ranges[i];
	linear_max_uV = range->min_uV +
	(range->max_sel - range->min_sel) * range->uV_step;

	if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
	continue;

	if (min_uV <= range->min_uV)
	min_uV = range->min_uV;

	/* range->uV_step == 0 means fixed voltage range */
	if (range->uV_step == 0) {
	ret = 0;
	} else {
	ret = DIV_ROUND_UP(min_uV - range->min_uV,
	range->uV_step);
	if (ret < 0)
	return ret;
	}

	ret += range->min_sel;

	break;
	}

	if (i == rdev->desc->n_linear_ranges)
	return -EINVAL;

	/* Map back into a voltage to verify we're still in bounds */
	voltage = rdev->desc->ops->list_voltage(rdev, ret);
	if (voltage < min_uV \|\| voltage > max_uV)
	return -EINVAL;

	return ret;
	}
	EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);

	/**
	* regulator_list_voltage_linear - List voltages with simple calculation
	*
	* @rdev: Regulator device
	* @selector: Selector to convert into a voltage
	*
	* Regulators with a simple linear mapping between voltages and
	* selectors can set min_uV and uV_step in the regulator descriptor
	* and then use this function as their list_voltage() operation,
	*/
	int regulator_list_voltage_linear(struct regulator_dev *rdev,
	unsigned int selector)
	{
	if (selector >= rdev->desc->n_voltages)
	return -EINVAL;
	if (selector < rdev->desc->linear_min_sel)
	return 0;

	selector -= rdev->desc->linear_min_sel;

	return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
	}
	EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);

	/**
	* regulator_list_voltage_linear_range - List voltages for linear ranges
	*
	* @rdev: Regulator device
	* @selector: Selector to convert into a voltage
	*
	* Regulators with a series of simple linear mappings between voltages
	* and selectors can set linear_ranges in the regulator descriptor and
	* then use this function as their list_voltage() operation,
	*/
	int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
	unsigned int selector)
	{
	const struct regulator_linear_range *range;
	int i;

	if (!rdev->desc->n_linear_ranges) {
	BUG_ON(!rdev->desc->n_linear_ranges);
	return -EINVAL;
	}

	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
	range = &rdev->desc->linear_ranges[i];

	if (!(selector >= range->min_sel &&
	selector <= range->max_sel))
	continue;

	selector -= range->min_sel;

	return range->min_uV + (range->uV_step * selector);
	}

	return -EINVAL;
	}
	EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);

	/**
	* regulator_list_voltage_table - List voltages with table based mapping
	*
	* @rdev: Regulator device
	* @selector: Selector to convert into a voltage
	*
	* Regulators with table based mapping between voltages and
	* selectors can set volt_table in the regulator descriptor
	* and then use this function as their list_voltage() operation.
	*/
	int regulator_list_voltage_table(struct regulator_dev *rdev,
	unsigned int selector)
	{
	if (!rdev->desc->volt_table) {
	BUG_ON(!rdev->desc->volt_table);
	return -EINVAL;
	}

	if (selector >= rdev->desc->n_voltages)
	return -EINVAL;

	return rdev->desc->volt_table[selector];
	}
	EXPORT_SYMBOL_GPL(regulator_list_voltage_table);

	/**
	* regulator_set_bypass_regmap - Default set_bypass() using regmap
	*
	* @rdev: device to operate on.
	* @enable: state to set.
	*/
	int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
	{
	unsigned int val;

	if (enable) {
	val = rdev->desc->bypass_val_on;
	if (!val)
	val = rdev->desc->bypass_mask;
	} else {
	val = rdev->desc->bypass_val_off;
	}

	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
	rdev->desc->bypass_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);

	/**
	* regulator_set_soft_start_regmap - Default set_soft_start() using regmap
	*
	* @rdev: device to operate on.
	*/
	int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;

	val = rdev->desc->soft_start_val_on;
	if (!val)
	val = rdev->desc->soft_start_mask;

	return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg,
	rdev->desc->soft_start_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);

	/**
	* regulator_set_pull_down_regmap - Default set_pull_down() using regmap
	*
	* @rdev: device to operate on.
	*/
	int regulator_set_pull_down_regmap(struct regulator_dev *rdev)
	{
	unsigned int val;

	val = rdev->desc->pull_down_val_on;
	if (!val)
	val = rdev->desc->pull_down_mask;

	return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg,
	rdev->desc->pull_down_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap);

	/**
	* regulator_get_bypass_regmap - Default get_bypass() using regmap
	*
	* @rdev: device to operate on.
	* @enable: current state.
	*/
	int regulator_get_bypass_regmap(struct regulator_dev rdev, bool enable)
	{
	unsigned int val;
	unsigned int val_on = rdev->desc->bypass_val_on;
	int ret;

	ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
	if (ret != 0)
	return ret;

	if (!val_on)
	val_on = rdev->desc->bypass_mask;

	*enable = (val & rdev->desc->bypass_mask) == val_on;

	return 0;
	}
	EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);

	/**
	* regulator_set_active_discharge_regmap - Default set_active_discharge()
	* using regmap
	*
	* @rdev: device to operate on.
	* @enable: state to set, 0 to disable and 1 to enable.
	*/
	int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
	bool enable)
	{
	unsigned int val;

	if (enable)
	val = rdev->desc->active_discharge_on;
	else
	val = rdev->desc->active_discharge_off;

	return regmap_update_bits(rdev->regmap,
	rdev->desc->active_discharge_reg,
	rdev->desc->active_discharge_mask, val);
	}
	EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);