|  | /* | 
|  | * Windfarm PowerMac thermal control. LM87 sensor | 
|  | * | 
|  | * Copyright 2012 Benjamin Herrenschmidt, IBM Corp. | 
|  | * | 
|  | * Released under the term of the GNU GPL v2. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/pmac_low_i2c.h> | 
|  |  | 
|  | #include "windfarm.h" | 
|  |  | 
|  | #define VERSION "1.0" | 
|  |  | 
|  | #undef DEBUG | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define DBG(args...)	printk(args) | 
|  | #else | 
|  | #define DBG(args...)	do { } while(0) | 
|  | #endif | 
|  |  | 
|  | struct wf_lm87_sensor { | 
|  | struct i2c_client	*i2c; | 
|  | struct wf_sensor	sens; | 
|  | }; | 
|  | #define wf_to_lm87(c) container_of(c, struct wf_lm87_sensor, sens) | 
|  |  | 
|  |  | 
|  | static int wf_lm87_read_reg(struct i2c_client *chip, int reg) | 
|  | { | 
|  | int rc, tries = 0; | 
|  | u8 buf; | 
|  |  | 
|  | for (;;) { | 
|  | /* Set address */ | 
|  | buf = (u8)reg; | 
|  | rc = i2c_master_send(chip, &buf, 1); | 
|  | if (rc <= 0) | 
|  | goto error; | 
|  | rc = i2c_master_recv(chip, &buf, 1); | 
|  | if (rc <= 0) | 
|  | goto error; | 
|  | return (int)buf; | 
|  | error: | 
|  | DBG("wf_lm87: Error reading LM87, retrying...\n"); | 
|  | if (++tries > 10) { | 
|  | printk(KERN_ERR "wf_lm87: Error reading LM87 !\n"); | 
|  | return -EIO; | 
|  | } | 
|  | msleep(10); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wf_lm87_get(struct wf_sensor *sr, s32 *value) | 
|  | { | 
|  | struct wf_lm87_sensor *lm = sr->priv; | 
|  | s32 temp; | 
|  |  | 
|  | if (lm->i2c == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | #define LM87_INT_TEMP		0x27 | 
|  |  | 
|  | /* Read temperature register */ | 
|  | temp = wf_lm87_read_reg(lm->i2c, LM87_INT_TEMP); | 
|  | if (temp < 0) | 
|  | return temp; | 
|  | *value = temp << 16; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wf_lm87_release(struct wf_sensor *sr) | 
|  | { | 
|  | struct wf_lm87_sensor *lm = wf_to_lm87(sr); | 
|  |  | 
|  | kfree(lm); | 
|  | } | 
|  |  | 
|  | static const struct wf_sensor_ops wf_lm87_ops = { | 
|  | .get_value	= wf_lm87_get, | 
|  | .release	= wf_lm87_release, | 
|  | .owner		= THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static int wf_lm87_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct wf_lm87_sensor *lm; | 
|  | const char *name = NULL, *loc; | 
|  | struct device_node *np = NULL; | 
|  | int rc; | 
|  |  | 
|  | /* | 
|  | * The lm87 contains a whole pile of sensors, additionally, | 
|  | * the Xserve G5 has several lm87's. However, for now we only | 
|  | * care about the internal temperature sensor | 
|  | */ | 
|  | while ((np = of_get_next_child(client->dev.of_node, np)) != NULL) { | 
|  | if (strcmp(np->name, "int-temp")) | 
|  | continue; | 
|  | loc = of_get_property(np, "location", NULL); | 
|  | if (!loc) | 
|  | continue; | 
|  | if (strstr(loc, "DIMM")) | 
|  | name = "dimms-temp"; | 
|  | else if (strstr(loc, "Processors")) | 
|  | name = "between-cpus-temp"; | 
|  | if (name) { | 
|  | of_node_put(np); | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!name) { | 
|  | pr_warning("wf_lm87: Unsupported sensor %pOF\n", | 
|  | client->dev.of_node); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | lm = kzalloc(sizeof(struct wf_lm87_sensor), GFP_KERNEL); | 
|  | if (lm == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | lm->i2c = client; | 
|  | lm->sens.name = name; | 
|  | lm->sens.ops = &wf_lm87_ops; | 
|  | lm->sens.priv = lm; | 
|  | i2c_set_clientdata(client, lm); | 
|  |  | 
|  | rc = wf_register_sensor(&lm->sens); | 
|  | if (rc) | 
|  | kfree(lm); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wf_lm87_remove(struct i2c_client *client) | 
|  | { | 
|  | struct wf_lm87_sensor *lm = i2c_get_clientdata(client); | 
|  |  | 
|  | DBG("wf_lm87: i2c detatch called for %s\n", lm->sens.name); | 
|  |  | 
|  | /* Mark client detached */ | 
|  | lm->i2c = NULL; | 
|  |  | 
|  | /* release sensor */ | 
|  | wf_unregister_sensor(&lm->sens); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id wf_lm87_id[] = { | 
|  | { "MAC,lm87cimt", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, wf_lm87_id); | 
|  |  | 
|  | static struct i2c_driver wf_lm87_driver = { | 
|  | .driver = { | 
|  | .name	= "wf_lm87", | 
|  | }, | 
|  | .probe		= wf_lm87_probe, | 
|  | .remove		= wf_lm87_remove, | 
|  | .id_table	= wf_lm87_id, | 
|  | }; | 
|  |  | 
|  | static int __init wf_lm87_sensor_init(void) | 
|  | { | 
|  | /* We only support this on the Xserve */ | 
|  | if (!of_machine_is_compatible("RackMac3,1")) | 
|  | return -ENODEV; | 
|  |  | 
|  | return i2c_add_driver(&wf_lm87_driver); | 
|  | } | 
|  |  | 
|  | static void __exit wf_lm87_sensor_exit(void) | 
|  | { | 
|  | i2c_del_driver(&wf_lm87_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(wf_lm87_sensor_init); | 
|  | module_exit(wf_lm87_sensor_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); | 
|  | MODULE_DESCRIPTION("LM87 sensor objects for PowerMacs thermal control"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |