|  | /* | 
|  | * Copyright 2013-2015 Emilio López | 
|  | * | 
|  | * Emilio López <emilio@elopez.com.ar> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clk-provider.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/reset-controller.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  |  | 
|  |  | 
|  | /** | 
|  | * sunxi_usb_reset... - reset bits in usb clk registers handling | 
|  | */ | 
|  |  | 
|  | struct usb_reset_data { | 
|  | void __iomem			*reg; | 
|  | spinlock_t			*lock; | 
|  | struct clk			*clk; | 
|  | struct reset_controller_dev	rcdev; | 
|  | }; | 
|  |  | 
|  | static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev, | 
|  | unsigned long id) | 
|  | { | 
|  | struct usb_reset_data *data = container_of(rcdev, | 
|  | struct usb_reset_data, | 
|  | rcdev); | 
|  | unsigned long flags; | 
|  | u32 reg; | 
|  |  | 
|  | clk_prepare_enable(data->clk); | 
|  | spin_lock_irqsave(data->lock, flags); | 
|  |  | 
|  | reg = readl(data->reg); | 
|  | writel(reg & ~BIT(id), data->reg); | 
|  |  | 
|  | spin_unlock_irqrestore(data->lock, flags); | 
|  | clk_disable_unprepare(data->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev, | 
|  | unsigned long id) | 
|  | { | 
|  | struct usb_reset_data *data = container_of(rcdev, | 
|  | struct usb_reset_data, | 
|  | rcdev); | 
|  | unsigned long flags; | 
|  | u32 reg; | 
|  |  | 
|  | clk_prepare_enable(data->clk); | 
|  | spin_lock_irqsave(data->lock, flags); | 
|  |  | 
|  | reg = readl(data->reg); | 
|  | writel(reg | BIT(id), data->reg); | 
|  |  | 
|  | spin_unlock_irqrestore(data->lock, flags); | 
|  | clk_disable_unprepare(data->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct reset_control_ops sunxi_usb_reset_ops = { | 
|  | .assert		= sunxi_usb_reset_assert, | 
|  | .deassert	= sunxi_usb_reset_deassert, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * sunxi_usb_clk_setup() - Setup function for usb gate clocks | 
|  | */ | 
|  |  | 
|  | #define SUNXI_USB_MAX_SIZE 32 | 
|  |  | 
|  | struct usb_clk_data { | 
|  | u32 clk_mask; | 
|  | u32 reset_mask; | 
|  | bool reset_needs_clk; | 
|  | }; | 
|  |  | 
|  | static void __init sunxi_usb_clk_setup(struct device_node *node, | 
|  | const struct usb_clk_data *data, | 
|  | spinlock_t *lock) | 
|  | { | 
|  | struct clk_onecell_data *clk_data; | 
|  | struct usb_reset_data *reset_data; | 
|  | const char *clk_parent; | 
|  | const char *clk_name; | 
|  | void __iomem *reg; | 
|  | int qty; | 
|  | int i = 0; | 
|  | int j = 0; | 
|  |  | 
|  | reg = of_io_request_and_map(node, 0, of_node_full_name(node)); | 
|  | if (IS_ERR(reg)) | 
|  | return; | 
|  |  | 
|  | clk_parent = of_clk_get_parent_name(node, 0); | 
|  | if (!clk_parent) | 
|  | return; | 
|  |  | 
|  | /* Worst-case size approximation and memory allocation */ | 
|  | qty = find_last_bit((unsigned long *)&data->clk_mask, | 
|  | SUNXI_USB_MAX_SIZE); | 
|  |  | 
|  | clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); | 
|  | if (!clk_data) | 
|  | return; | 
|  |  | 
|  | clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL); | 
|  | if (!clk_data->clks) { | 
|  | kfree(clk_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for_each_set_bit(i, (unsigned long *)&data->clk_mask, | 
|  | SUNXI_USB_MAX_SIZE) { | 
|  | of_property_read_string_index(node, "clock-output-names", | 
|  | j, &clk_name); | 
|  | clk_data->clks[i] = clk_register_gate(NULL, clk_name, | 
|  | clk_parent, 0, | 
|  | reg, i, 0, lock); | 
|  | WARN_ON(IS_ERR(clk_data->clks[i])); | 
|  |  | 
|  | j++; | 
|  | } | 
|  |  | 
|  | /* Adjust to the real max */ | 
|  | clk_data->clk_num = i; | 
|  |  | 
|  | of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); | 
|  |  | 
|  | /* Register a reset controller for usb with reset bits */ | 
|  | if (data->reset_mask == 0) | 
|  | return; | 
|  |  | 
|  | reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); | 
|  | if (!reset_data) | 
|  | return; | 
|  |  | 
|  | if (data->reset_needs_clk) { | 
|  | reset_data->clk = of_clk_get(node, 0); | 
|  | if (IS_ERR(reset_data->clk)) { | 
|  | pr_err("Could not get clock for reset controls\n"); | 
|  | kfree(reset_data); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | reset_data->reg = reg; | 
|  | reset_data->lock = lock; | 
|  | reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1; | 
|  | reset_data->rcdev.ops = &sunxi_usb_reset_ops; | 
|  | reset_data->rcdev.of_node = node; | 
|  | reset_controller_register(&reset_data->rcdev); | 
|  | } | 
|  |  | 
|  | static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = { | 
|  | .clk_mask = BIT(8) | BIT(7) | BIT(6), | 
|  | .reset_mask = BIT(2) | BIT(1) | BIT(0), | 
|  | }; | 
|  |  | 
|  | static DEFINE_SPINLOCK(sun4i_a10_usb_lock); | 
|  |  | 
|  | static void __init sun4i_a10_usb_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = { | 
|  | .clk_mask = BIT(8) | BIT(6), | 
|  | .reset_mask = BIT(1) | BIT(0), | 
|  | }; | 
|  |  | 
|  | static void __init sun5i_a13_usb_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = { | 
|  | .clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8), | 
|  | .reset_mask = BIT(2) | BIT(1) | BIT(0), | 
|  | }; | 
|  |  | 
|  | static void __init sun6i_a31_usb_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun8i_a23_usb_clk_data __initconst = { | 
|  | .clk_mask = BIT(16) | BIT(11) | BIT(10) | BIT(9) | BIT(8), | 
|  | .reset_mask = BIT(2) | BIT(1) | BIT(0), | 
|  | }; | 
|  |  | 
|  | static void __init sun8i_a23_usb_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun8i_a23_usb_clk_data, &sun4i_a10_usb_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun8i_a23_usb, "allwinner,sun8i-a23-usb-clk", sun8i_a23_usb_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = { | 
|  | .clk_mask =  BIT(19) | BIT(18) | BIT(17) | BIT(16) | | 
|  | BIT(11) | BIT(10) | BIT(9) | BIT(8), | 
|  | .reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0), | 
|  | }; | 
|  |  | 
|  | static void __init sun8i_h3_usb_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = { | 
|  | .clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), | 
|  | .reset_mask = BIT(19) | BIT(18) | BIT(17), | 
|  | .reset_needs_clk = 1, | 
|  | }; | 
|  |  | 
|  | static DEFINE_SPINLOCK(a80_usb_mod_lock); | 
|  |  | 
|  | static void __init sun9i_a80_usb_mod_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup); | 
|  |  | 
|  | static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = { | 
|  | .clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1), | 
|  | .reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17), | 
|  | .reset_needs_clk = 1, | 
|  | }; | 
|  |  | 
|  | static DEFINE_SPINLOCK(a80_usb_phy_lock); | 
|  |  | 
|  | static void __init sun9i_a80_usb_phy_setup(struct device_node *node) | 
|  | { | 
|  | sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock); | 
|  | } | 
|  | CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup); |