sound/hda/hdac_component.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 // hdac_component.c - routines for sync between HD-A core and DRM driver

 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/component.h>
 #include <sound/core.h>
 #include <sound/hdaudio.h>
 #include <sound/hda_component.h>
 #include <sound/hda_register.h>

 static void hdac_acomp_release(struct device *dev, void *res)
 {
 }

 static struct drm_audio_component *hdac_get_acomp(struct device *dev)
 {
 	return devres_find(dev, hdac_acomp_release, NULL, NULL);
 }

 /**
  * snd_hdac_set_codec_wakeup - Enable / disable HDMI/DP codec wakeup
  * @bus: HDA core bus
  * @enable: enable or disable the wakeup
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function should be called during the chip reset, also called at
  * resume for updating STATESTS register read.
  *
  * Returns zero for success or a negative error code.
  */
 int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable)
 {
 	struct drm_audio_component *acomp = bus->audio_component;

 	if (!acomp || !acomp->ops)
 		return -ENODEV;

 	if (!acomp->ops->codec_wake_override)
 		return 0;

 	dev_dbg(bus->dev, "%s codec wakeup\n",
 		enable ? "enable" : "disable");

 	acomp->ops->codec_wake_override(acomp->dev, enable);

 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_set_codec_wakeup);

 /**
  * snd_hdac_display_power - Power up / down the power refcount
  * @bus: HDA core bus
  * @idx: HDA codec address, pass HDA_CODEC_IDX_CONTROLLER for controller
  * @enable: power up or down
  *
  * This function is used by either HD-audio controller or codec driver that
  * needs the interaction with graphics driver.
  *
  * This function updates the power status, and calls the get_power() and
  * put_power() ops accordingly, toggling the codec wakeup, too.
  */
 void snd_hdac_display_power(struct hdac_bus *bus, unsigned int idx, bool enable)
 {
 	struct drm_audio_component *acomp = bus->audio_component;

 	dev_dbg(bus->dev, "display power %s\n",
 		enable ? "enable" : "disable");

 	mutex_lock(&bus->lock);
 	if (enable)
 		set_bit(idx, &bus->display_power_status);
 	else
 		clear_bit(idx, &bus->display_power_status);

 	if (!acomp || !acomp->ops)
 		goto unlock;

 	if (bus->display_power_status) {
 		if (!bus->display_power_active) {
 			unsigned long cookie = -1;

 			if (acomp->ops->get_power)
 				cookie = acomp->ops->get_power(acomp->dev);

 			snd_hdac_set_codec_wakeup(bus, true);
 			snd_hdac_set_codec_wakeup(bus, false);
 			bus->display_power_active = cookie;
 		}
 	} else {
 		if (bus->display_power_active) {
 			unsigned long cookie = bus->display_power_active;

 			if (acomp->ops->put_power)
 				acomp->ops->put_power(acomp->dev, cookie);

 			bus->display_power_active = 0;
 		}
 	}
  unlock:
 	mutex_unlock(&bus->lock);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_display_power);

 /**
  * snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate
  * @codec: HDA codec
  * @nid: the pin widget NID
  * @dev_id: device identifier
  * @rate: the sample rate to set
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function sets N/CTS value based on the given sample rate.
  * Returns zero for success, or a negative error code.
  */
 int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
 			     int dev_id, int rate)
 {
 	struct hdac_bus *bus = codec->bus;
 	struct drm_audio_component *acomp = bus->audio_component;
 	int port, pipe;

 	if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate)
 		return -ENODEV;
 	port = nid;
 	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
 		port = acomp->audio_ops->pin2port(codec, nid);
 		if (port < 0)
 			return -EINVAL;
 	}
 	pipe = dev_id;
 	return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);

 /**
  * snd_hdac_acomp_get_eld - Get the audio state and ELD via component
  * @codec: HDA codec
  * @nid: the pin widget NID
  * @dev_id: device identifier
  * @audio_enabled: the pointer to store the current audio state
  * @buffer: the buffer pointer to store ELD bytes
  * @max_bytes: the max bytes to be stored on @buffer
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function queries the current state of the audio on the given
  * digital port and fetches the ELD bytes onto the given buffer.
  * It returns the number of bytes for the total ELD data, zero for
  * invalid ELD, or a negative error code.
  *
  * The return size is the total bytes required for the whole ELD bytes,
  * thus it may be over @max_bytes.  If it's over @max_bytes, it implies
  * that only a part of ELD bytes have been fetched.
  */
 int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
 			   bool *audio_enabled, char *buffer, int max_bytes)
 {
 	struct hdac_bus *bus = codec->bus;
 	struct drm_audio_component *acomp = bus->audio_component;
 	int port, pipe;

 	if (!acomp || !acomp->ops || !acomp->ops->get_eld)
 		return -ENODEV;

 	port = nid;
 	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
 		port = acomp->audio_ops->pin2port(codec, nid);
 		if (port < 0)
 			return -EINVAL;
 	}
 	pipe = dev_id;
 	return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
 				   buffer, max_bytes);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);

 static int hdac_component_master_bind(struct device *dev)
 {
 	struct drm_audio_component *acomp = hdac_get_acomp(dev);
 	int ret;

 	if (WARN_ON(!acomp))
 		return -EINVAL;

 	ret = component_bind_all(dev, acomp);
 	if (ret < 0)
 		return ret;

 	if (WARN_ON(!(acomp->dev && acomp->ops))) {
 		ret = -EINVAL;
 		goto out_unbind;
 	}

 	/* pin the module to avoid dynamic unbinding, but only if given */
 	if (!try_module_get(acomp->ops->owner)) {
 		ret = -ENODEV;
 		goto out_unbind;
 	}

 	if (acomp->audio_ops && acomp->audio_ops->master_bind) {
 		ret = acomp->audio_ops->master_bind(dev, acomp);
 		if (ret < 0)
 			goto module_put;
 	}

 	return 0;

  module_put:
 	module_put(acomp->ops->owner);
 out_unbind:
 	component_unbind_all(dev, acomp);

 	return ret;
 }

 static void hdac_component_master_unbind(struct device *dev)
 {
 	struct drm_audio_component *acomp = hdac_get_acomp(dev);

 	if (acomp->audio_ops && acomp->audio_ops->master_unbind)
 		acomp->audio_ops->master_unbind(dev, acomp);
 	module_put(acomp->ops->owner);
 	component_unbind_all(dev, acomp);
 	WARN_ON(acomp->ops || acomp->dev);
 }

 static const struct component_master_ops hdac_component_master_ops = {
 	.bind = hdac_component_master_bind,
 	.unbind = hdac_component_master_unbind,
 };

 /**
  * snd_hdac_acomp_register_notifier - Register audio component ops
  * @bus: HDA core bus
  * @aops: audio component ops
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function sets the given ops to be called by the graphics driver.
  *
  * Returns zero for success or a negative error code.
  */
 int snd_hdac_acomp_register_notifier(struct hdac_bus *bus,
 				    const struct drm_audio_component_audio_ops *aops)
 {
 	if (!bus->audio_component)
 		return -ENODEV;

 	bus->audio_component->audio_ops = aops;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_acomp_register_notifier);

 /**
  * snd_hdac_acomp_init - Initialize audio component
  * @bus: HDA core bus
  * @match_master: match function for finding components
  * @extra_size: Extra bytes to allocate
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function initializes and sets up the audio component to communicate
  * with graphics driver.
  *
  * Unlike snd_hdac_i915_init(), this function doesn't synchronize with the
  * binding with the DRM component.  Each caller needs to sync via master_bind
  * audio_ops.
  *
  * Returns zero for success or a negative error code.
  */
 int snd_hdac_acomp_init(struct hdac_bus *bus,
 			const struct drm_audio_component_audio_ops *aops,
 			int (*match_master)(struct device *, int, void *),
 			size_t extra_size)
 {
 	struct component_match *match = NULL;
 	struct device *dev = bus->dev;
 	struct drm_audio_component *acomp;
 	int ret;

 	if (WARN_ON(hdac_get_acomp(dev)))
 		return -EBUSY;

 	acomp = devres_alloc(hdac_acomp_release, sizeof(*acomp) + extra_size,
 			     GFP_KERNEL);
 	if (!acomp)
 		return -ENOMEM;
 	acomp->audio_ops = aops;
 	bus->audio_component = acomp;
 	devres_add(dev, acomp);

 	component_match_add_typed(dev, &match, match_master, bus);
 	ret = component_master_add_with_match(dev, &hdac_component_master_ops,
 					      match);
 	if (ret < 0)
 		goto out_err;

 	return 0;

 out_err:
 	bus->audio_component = NULL;
 	devres_destroy(dev, hdac_acomp_release, NULL, NULL);
 	dev_info(dev, "failed to add audio component master (%d)\n", ret);

 	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_acomp_init);

 /**
  * snd_hdac_acomp_exit - Finalize audio component
  * @bus: HDA core bus
  *
  * This function is supposed to be used only by a HD-audio controller
  * driver that needs the interaction with graphics driver.
  *
  * This function releases the audio component that has been used.
  *
  * Returns zero for success or a negative error code.
  */
 int snd_hdac_acomp_exit(struct hdac_bus *bus)
 {
 	struct device *dev = bus->dev;
 	struct drm_audio_component *acomp = bus->audio_component;

 	if (!acomp)
 		return 0;

 	if (WARN_ON(bus->display_power_active) && acomp->ops)
 		acomp->ops->put_power(acomp->dev, bus->display_power_active);

 	bus->display_power_active = 0;
 	bus->display_power_status = 0;

 	component_master_del(dev, &hdac_component_master_ops);

 	bus->audio_component = NULL;
 	devres_destroy(dev, hdac_acomp_release, NULL, NULL);

 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_acomp_exit);
	// SPDX-License-Identifier: GPL-2.0
	// hdac_component.c - routines for sync between HD-A core and DRM driver

	#include <linux/init.h>
	#include <linux/module.h>
	#include <linux/pci.h>
	#include <linux/component.h>
	#include <sound/core.h>
	#include <sound/hdaudio.h>
	#include <sound/hda_component.h>
	#include <sound/hda_register.h>

	static void hdac_acomp_release(struct device dev, void res)
	{
	}

	static struct drm_audio_component hdac_get_acomp(struct device dev)
	{
	return devres_find(dev, hdac_acomp_release, NULL, NULL);
	}

	/**
	* snd_hdac_set_codec_wakeup - Enable / disable HDMI/DP codec wakeup
	* @bus: HDA core bus
	* @enable: enable or disable the wakeup
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function should be called during the chip reset, also called at
	* resume for updating STATESTS register read.
	*
	* Returns zero for success or a negative error code.
	*/
	int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable)
	{
	struct drm_audio_component *acomp = bus->audio_component;

	if (!acomp \|\| !acomp->ops)
	return -ENODEV;

	if (!acomp->ops->codec_wake_override)
	return 0;

	dev_dbg(bus->dev, "%s codec wakeup\n",
	enable ? "enable" : "disable");

	acomp->ops->codec_wake_override(acomp->dev, enable);

	return 0;
	}
	EXPORT_SYMBOL_GPL(snd_hdac_set_codec_wakeup);

	/**
	* snd_hdac_display_power - Power up / down the power refcount
	* @bus: HDA core bus
	* @idx: HDA codec address, pass HDA_CODEC_IDX_CONTROLLER for controller
	* @enable: power up or down
	*
	* This function is used by either HD-audio controller or codec driver that
	* needs the interaction with graphics driver.
	*
	* This function updates the power status, and calls the get_power() and
	* put_power() ops accordingly, toggling the codec wakeup, too.
	*/
	void snd_hdac_display_power(struct hdac_bus *bus, unsigned int idx, bool enable)
	{
	struct drm_audio_component *acomp = bus->audio_component;

	dev_dbg(bus->dev, "display power %s\n",
	enable ? "enable" : "disable");

	mutex_lock(&bus->lock);
	if (enable)
	set_bit(idx, &bus->display_power_status);
	else
	clear_bit(idx, &bus->display_power_status);

	if (!acomp \|\| !acomp->ops)
	goto unlock;

	if (bus->display_power_status) {
	if (!bus->display_power_active) {
	unsigned long cookie = -1;

	if (acomp->ops->get_power)
	cookie = acomp->ops->get_power(acomp->dev);

	snd_hdac_set_codec_wakeup(bus, true);
	snd_hdac_set_codec_wakeup(bus, false);
	bus->display_power_active = cookie;
	}
	} else {
	if (bus->display_power_active) {
	unsigned long cookie = bus->display_power_active;

	if (acomp->ops->put_power)
	acomp->ops->put_power(acomp->dev, cookie);

	bus->display_power_active = 0;
	}
	}
	unlock:
	mutex_unlock(&bus->lock);
	}
	EXPORT_SYMBOL_GPL(snd_hdac_display_power);

	/**
	* snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate
	* @codec: HDA codec
	* @nid: the pin widget NID
	* @dev_id: device identifier
	* @rate: the sample rate to set
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function sets N/CTS value based on the given sample rate.
	* Returns zero for success, or a negative error code.
	*/
	int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
	int dev_id, int rate)
	{
	struct hdac_bus *bus = codec->bus;
	struct drm_audio_component *acomp = bus->audio_component;
	int port, pipe;

	if (!acomp \|\| !acomp->ops \|\| !acomp->ops->sync_audio_rate)
	return -ENODEV;
	port = nid;
	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
	port = acomp->audio_ops->pin2port(codec, nid);
	if (port < 0)
	return -EINVAL;
	}
	pipe = dev_id;
	return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
	}
	EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);

	/**
	* snd_hdac_acomp_get_eld - Get the audio state and ELD via component
	* @codec: HDA codec
	* @nid: the pin widget NID
	* @dev_id: device identifier
	* @audio_enabled: the pointer to store the current audio state
	* @buffer: the buffer pointer to store ELD bytes
	* @max_bytes: the max bytes to be stored on @buffer
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function queries the current state of the audio on the given
	* digital port and fetches the ELD bytes onto the given buffer.
	* It returns the number of bytes for the total ELD data, zero for
	* invalid ELD, or a negative error code.
	*
	* The return size is the total bytes required for the whole ELD bytes,
	* thus it may be over @max_bytes. If it's over @max_bytes, it implies
	* that only a part of ELD bytes have been fetched.
	*/
	int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
	bool audio_enabled, char buffer, int max_bytes)
	{
	struct hdac_bus *bus = codec->bus;
	struct drm_audio_component *acomp = bus->audio_component;
	int port, pipe;

	if (!acomp \|\| !acomp->ops \|\| !acomp->ops->get_eld)
	return -ENODEV;

	port = nid;
	if (acomp->audio_ops && acomp->audio_ops->pin2port) {
	port = acomp->audio_ops->pin2port(codec, nid);
	if (port < 0)
	return -EINVAL;
	}
	pipe = dev_id;
	return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
	buffer, max_bytes);
	}
	EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);

	static int hdac_component_master_bind(struct device *dev)
	{
	struct drm_audio_component *acomp = hdac_get_acomp(dev);
	int ret;

	if (WARN_ON(!acomp))
	return -EINVAL;

	ret = component_bind_all(dev, acomp);
	if (ret < 0)
	return ret;

	if (WARN_ON(!(acomp->dev && acomp->ops))) {
	ret = -EINVAL;
	goto out_unbind;
	}

	/* pin the module to avoid dynamic unbinding, but only if given */
	if (!try_module_get(acomp->ops->owner)) {
	ret = -ENODEV;
	goto out_unbind;
	}

	if (acomp->audio_ops && acomp->audio_ops->master_bind) {
	ret = acomp->audio_ops->master_bind(dev, acomp);
	if (ret < 0)
	goto module_put;
	}

	return 0;

	module_put:
	module_put(acomp->ops->owner);
	out_unbind:
	component_unbind_all(dev, acomp);

	return ret;
	}

	static void hdac_component_master_unbind(struct device *dev)
	{
	struct drm_audio_component *acomp = hdac_get_acomp(dev);

	if (acomp->audio_ops && acomp->audio_ops->master_unbind)
	acomp->audio_ops->master_unbind(dev, acomp);
	module_put(acomp->ops->owner);
	component_unbind_all(dev, acomp);
	WARN_ON(acomp->ops \|\| acomp->dev);
	}

	static const struct component_master_ops hdac_component_master_ops = {
	.bind = hdac_component_master_bind,
	.unbind = hdac_component_master_unbind,
	};

	/**
	* snd_hdac_acomp_register_notifier - Register audio component ops
	* @bus: HDA core bus
	* @aops: audio component ops
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function sets the given ops to be called by the graphics driver.
	*
	* Returns zero for success or a negative error code.
	*/
	int snd_hdac_acomp_register_notifier(struct hdac_bus *bus,
	const struct drm_audio_component_audio_ops *aops)
	{
	if (!bus->audio_component)
	return -ENODEV;

	bus->audio_component->audio_ops = aops;
	return 0;
	}
	EXPORT_SYMBOL_GPL(snd_hdac_acomp_register_notifier);

	/**
	* snd_hdac_acomp_init - Initialize audio component
	* @bus: HDA core bus
	* @match_master: match function for finding components
	* @extra_size: Extra bytes to allocate
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function initializes and sets up the audio component to communicate
	* with graphics driver.
	*
	* Unlike snd_hdac_i915_init(), this function doesn't synchronize with the
	* binding with the DRM component. Each caller needs to sync via master_bind
	* audio_ops.
	*
	* Returns zero for success or a negative error code.
	*/
	int snd_hdac_acomp_init(struct hdac_bus *bus,
	const struct drm_audio_component_audio_ops *aops,
	int (match_master)(struct device , int, void *),
	size_t extra_size)
	{
	struct component_match *match = NULL;
	struct device *dev = bus->dev;
	struct drm_audio_component *acomp;
	int ret;

	if (WARN_ON(hdac_get_acomp(dev)))
	return -EBUSY;

	acomp = devres_alloc(hdac_acomp_release, sizeof(*acomp) + extra_size,
	GFP_KERNEL);
	if (!acomp)
	return -ENOMEM;
	acomp->audio_ops = aops;
	bus->audio_component = acomp;
	devres_add(dev, acomp);

	component_match_add_typed(dev, &match, match_master, bus);
	ret = component_master_add_with_match(dev, &hdac_component_master_ops,
	match);
	if (ret < 0)
	goto out_err;

	return 0;

	out_err:
	bus->audio_component = NULL;
	devres_destroy(dev, hdac_acomp_release, NULL, NULL);
	dev_info(dev, "failed to add audio component master (%d)\n", ret);

	return ret;
	}
	EXPORT_SYMBOL_GPL(snd_hdac_acomp_init);

	/**
	* snd_hdac_acomp_exit - Finalize audio component
	* @bus: HDA core bus
	*
	* This function is supposed to be used only by a HD-audio controller
	* driver that needs the interaction with graphics driver.
	*
	* This function releases the audio component that has been used.
	*
	* Returns zero for success or a negative error code.
	*/
	int snd_hdac_acomp_exit(struct hdac_bus *bus)
	{
	struct device *dev = bus->dev;
	struct drm_audio_component *acomp = bus->audio_component;

	if (!acomp)
	return 0;

	if (WARN_ON(bus->display_power_active) && acomp->ops)
	acomp->ops->put_power(acomp->dev, bus->display_power_active);

	bus->display_power_active = 0;
	bus->display_power_status = 0;

	component_master_del(dev, &hdac_component_master_ops);

	bus->audio_component = NULL;
	devres_destroy(dev, hdac_acomp_release, NULL, NULL);

	return 0;
	}
	EXPORT_SYMBOL_GPL(snd_hdac_acomp_exit);