| // SPDX-License-Identifier: GPL-2.0-only |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/sched/clock.h> |
| #include <linux/init.h> |
| #include <linux/export.h> |
| #include <linux/timer.h> |
| #include <linux/acpi_pmtmr.h> |
| #include <linux/cpufreq.h> |
| #include <linux/delay.h> |
| #include <linux/clocksource.h> |
| #include <linux/percpu.h> |
| #include <linux/timex.h> |
| #include <linux/static_key.h> |
| |
| #include <asm/hpet.h> |
| #include <asm/timer.h> |
| #include <asm/vgtod.h> |
| #include <asm/time.h> |
| #include <asm/delay.h> |
| #include <asm/hypervisor.h> |
| #include <asm/nmi.h> |
| #include <asm/x86_init.h> |
| #include <asm/geode.h> |
| #include <asm/apic.h> |
| #include <asm/intel-family.h> |
| #include <asm/i8259.h> |
| #include <asm/uv/uv.h> |
| |
| unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */ |
| EXPORT_SYMBOL(cpu_khz); |
| |
| unsigned int __read_mostly tsc_khz; |
| EXPORT_SYMBOL(tsc_khz); |
| |
| #define KHZ 1000 |
| |
| /* |
| * TSC can be unstable due to cpufreq or due to unsynced TSCs |
| */ |
| static int __read_mostly tsc_unstable; |
| |
| static DEFINE_STATIC_KEY_FALSE(__use_tsc); |
| |
| int tsc_clocksource_reliable; |
| |
| static u32 art_to_tsc_numerator; |
| static u32 art_to_tsc_denominator; |
| static u64 art_to_tsc_offset; |
| struct clocksource *art_related_clocksource; |
| |
| struct cyc2ns { |
| struct cyc2ns_data data[2]; /* 0 + 2*16 = 32 */ |
| seqcount_t seq; /* 32 + 4 = 36 */ |
| |
| }; /* fits one cacheline */ |
| |
| static DEFINE_PER_CPU_ALIGNED(struct cyc2ns, cyc2ns); |
| |
| __always_inline void cyc2ns_read_begin(struct cyc2ns_data *data) |
| { |
| int seq, idx; |
| |
| preempt_disable_notrace(); |
| |
| do { |
| seq = this_cpu_read(cyc2ns.seq.sequence); |
| idx = seq & 1; |
| |
| data->cyc2ns_offset = this_cpu_read(cyc2ns.data[idx].cyc2ns_offset); |
| data->cyc2ns_mul = this_cpu_read(cyc2ns.data[idx].cyc2ns_mul); |
| data->cyc2ns_shift = this_cpu_read(cyc2ns.data[idx].cyc2ns_shift); |
| |
| } while (unlikely(seq != this_cpu_read(cyc2ns.seq.sequence))); |
| } |
| |
| __always_inline void cyc2ns_read_end(void) |
| { |
| preempt_enable_notrace(); |
| } |
| |
| /* |
| * Accelerators for sched_clock() |
| * convert from cycles(64bits) => nanoseconds (64bits) |
| * basic equation: |
| * ns = cycles / (freq / ns_per_sec) |
| * ns = cycles * (ns_per_sec / freq) |
| * ns = cycles * (10^9 / (cpu_khz * 10^3)) |
| * ns = cycles * (10^6 / cpu_khz) |
| * |
| * Then we use scaling math (suggested by george@mvista.com) to get: |
| * ns = cycles * (10^6 * SC / cpu_khz) / SC |
| * ns = cycles * cyc2ns_scale / SC |
| * |
| * And since SC is a constant power of two, we can convert the div |
| * into a shift. The larger SC is, the more accurate the conversion, but |
| * cyc2ns_scale needs to be a 32-bit value so that 32-bit multiplication |
| * (64-bit result) can be used. |
| * |
| * We can use khz divisor instead of mhz to keep a better precision. |
| * (mathieu.desnoyers@polymtl.ca) |
| * |
| * -johnstul@us.ibm.com "math is hard, lets go shopping!" |
| */ |
| |
| static __always_inline unsigned long long cycles_2_ns(unsigned long long cyc) |
| { |
| struct cyc2ns_data data; |
| unsigned long long ns; |
| |
| cyc2ns_read_begin(&data); |
| |
| ns = data.cyc2ns_offset; |
| ns += mul_u64_u32_shr(cyc, data.cyc2ns_mul, data.cyc2ns_shift); |
| |
| cyc2ns_read_end(); |
| |
| return ns; |
| } |
| |
| static void __set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) |
| { |
| unsigned long long ns_now; |
| struct cyc2ns_data data; |
| struct cyc2ns *c2n; |
| |
| ns_now = cycles_2_ns(tsc_now); |
| |
| /* |
| * Compute a new multiplier as per the above comment and ensure our |
| * time function is continuous; see the comment near struct |
| * cyc2ns_data. |
| */ |
| clocks_calc_mult_shift(&data.cyc2ns_mul, &data.cyc2ns_shift, khz, |
| NSEC_PER_MSEC, 0); |
| |
| /* |
| * cyc2ns_shift is exported via arch_perf_update_userpage() where it is |
| * not expected to be greater than 31 due to the original published |
| * conversion algorithm shifting a 32-bit value (now specifies a 64-bit |
| * value) - refer perf_event_mmap_page documentation in perf_event.h. |
| */ |
| if (data.cyc2ns_shift == 32) { |
| data.cyc2ns_shift = 31; |
| data.cyc2ns_mul >>= 1; |
| } |
| |
| data.cyc2ns_offset = ns_now - |
| mul_u64_u32_shr(tsc_now, data.cyc2ns_mul, data.cyc2ns_shift); |
| |
| c2n = per_cpu_ptr(&cyc2ns, cpu); |
| |
| raw_write_seqcount_latch(&c2n->seq); |
| c2n->data[0] = data; |
| raw_write_seqcount_latch(&c2n->seq); |
| c2n->data[1] = data; |
| } |
| |
| static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| sched_clock_idle_sleep_event(); |
| |
| if (khz) |
| __set_cyc2ns_scale(khz, cpu, tsc_now); |
| |
| sched_clock_idle_wakeup_event(); |
| local_irq_restore(flags); |
| } |
| |
| /* |
| * Initialize cyc2ns for boot cpu |
| */ |
| static void __init cyc2ns_init_boot_cpu(void) |
| { |
| struct cyc2ns *c2n = this_cpu_ptr(&cyc2ns); |
| |
| seqcount_init(&c2n->seq); |
| __set_cyc2ns_scale(tsc_khz, smp_processor_id(), rdtsc()); |
| } |
| |
| /* |
| * Secondary CPUs do not run through tsc_init(), so set up |
| * all the scale factors for all CPUs, assuming the same |
| * speed as the bootup CPU. |
| */ |
| static void __init cyc2ns_init_secondary_cpus(void) |
| { |
| unsigned int cpu, this_cpu = smp_processor_id(); |
| struct cyc2ns *c2n = this_cpu_ptr(&cyc2ns); |
| struct cyc2ns_data *data = c2n->data; |
| |
| for_each_possible_cpu(cpu) { |
| if (cpu != this_cpu) { |
| seqcount_init(&c2n->seq); |
| c2n = per_cpu_ptr(&cyc2ns, cpu); |
| c2n->data[0] = data[0]; |
| c2n->data[1] = data[1]; |
| } |
| } |
| } |
| |
| /* |
| * Scheduler clock - returns current time in nanosec units. |
| */ |
| u64 native_sched_clock(void) |
| { |
| if (static_branch_likely(&__use_tsc)) { |
| u64 tsc_now = rdtsc(); |
| |
| /* return the value in ns */ |
| return cycles_2_ns(tsc_now); |
| } |
| |
| /* |
| * Fall back to jiffies if there's no TSC available: |
| * ( But note that we still use it if the TSC is marked |
| * unstable. We do this because unlike Time Of Day, |
| * the scheduler clock tolerates small errors and it's |
| * very important for it to be as fast as the platform |
| * can achieve it. ) |
| */ |
| |
| /* No locking but a rare wrong value is not a big deal: */ |
| return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); |
| } |
| |
| /* |
| * Generate a sched_clock if you already have a TSC value. |
| */ |
| u64 native_sched_clock_from_tsc(u64 tsc) |
| { |
| return cycles_2_ns(tsc); |
| } |
| |
| /* We need to define a real function for sched_clock, to override the |
| weak default version */ |
| #ifdef CONFIG_PARAVIRT |
| unsigned long long sched_clock(void) |
| { |
| return paravirt_sched_clock(); |
| } |
| |
| bool using_native_sched_clock(void) |
| { |
| return pv_ops.time.sched_clock == native_sched_clock; |
| } |
| #else |
| unsigned long long |
| sched_clock(void) __attribute__((alias("native_sched_clock"))); |
| |
| bool using_native_sched_clock(void) { return true; } |
| #endif |
| |
| int check_tsc_unstable(void) |
| { |
| return tsc_unstable; |
| } |
| EXPORT_SYMBOL_GPL(check_tsc_unstable); |
| |
| #ifdef CONFIG_X86_TSC |
| int __init notsc_setup(char *str) |
| { |
| mark_tsc_unstable("boot parameter notsc"); |
| return 1; |
| } |
| #else |
| /* |
| * disable flag for tsc. Takes effect by clearing the TSC cpu flag |
| * in cpu/common.c |
| */ |
| int __init notsc_setup(char *str) |
| { |
| setup_clear_cpu_cap(X86_FEATURE_TSC); |
| return 1; |
| } |
| #endif |
| |
| __setup("notsc", notsc_setup); |
| |
| static int no_sched_irq_time; |
| static int no_tsc_watchdog; |
| |
| static int __init tsc_setup(char *str) |
| { |
| if (!strcmp(str, "reliable")) |
| tsc_clocksource_reliable = 1; |
| if (!strncmp(str, "noirqtime", 9)) |
| no_sched_irq_time = 1; |
| if (!strcmp(str, "unstable")) |
| mark_tsc_unstable("boot parameter"); |
| if (!strcmp(str, "nowatchdog")) |
| no_tsc_watchdog = 1; |
| return 1; |
| } |
| |
| __setup("tsc=", tsc_setup); |
| |
| #define MAX_RETRIES 5 |
| #define TSC_DEFAULT_THRESHOLD 0x20000 |
| |
| /* |
| * Read TSC and the reference counters. Take care of any disturbances |
| */ |
| static u64 tsc_read_refs(u64 *p, int hpet) |
| { |
| u64 t1, t2; |
| u64 thresh = tsc_khz ? tsc_khz >> 5 : TSC_DEFAULT_THRESHOLD; |
| int i; |
| |
| for (i = 0; i < MAX_RETRIES; i++) { |
| t1 = get_cycles(); |
| if (hpet) |
| *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; |
| else |
| *p = acpi_pm_read_early(); |
| t2 = get_cycles(); |
| if ((t2 - t1) < thresh) |
| return t2; |
| } |
| return ULLONG_MAX; |
| } |
| |
| /* |
| * Calculate the TSC frequency from HPET reference |
| */ |
| static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2) |
| { |
| u64 tmp; |
| |
| if (hpet2 < hpet1) |
| hpet2 += 0x100000000ULL; |
| hpet2 -= hpet1; |
| tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); |
| do_div(tmp, 1000000); |
| deltatsc = div64_u64(deltatsc, tmp); |
| |
| return (unsigned long) deltatsc; |
| } |
| |
| /* |
| * Calculate the TSC frequency from PMTimer reference |
| */ |
| static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2) |
| { |
| u64 tmp; |
| |
| if (!pm1 && !pm2) |
| return ULONG_MAX; |
| |
| if (pm2 < pm1) |
| pm2 += (u64)ACPI_PM_OVRRUN; |
| pm2 -= pm1; |
| tmp = pm2 * 1000000000LL; |
| do_div(tmp, PMTMR_TICKS_PER_SEC); |
| do_div(deltatsc, tmp); |
| |
| return (unsigned long) deltatsc; |
| } |
| |
| #define CAL_MS 10 |
| #define CAL_LATCH (PIT_TICK_RATE / (1000 / CAL_MS)) |
| #define CAL_PIT_LOOPS 1000 |
| |
| #define CAL2_MS 50 |
| #define CAL2_LATCH (PIT_TICK_RATE / (1000 / CAL2_MS)) |
| #define CAL2_PIT_LOOPS 5000 |
| |
| |
| /* |
| * Try to calibrate the TSC against the Programmable |
| * Interrupt Timer and return the frequency of the TSC |
| * in kHz. |
| * |
| * Return ULONG_MAX on failure to calibrate. |
| */ |
| static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin) |
| { |
| u64 tsc, t1, t2, delta; |
| unsigned long tscmin, tscmax; |
| int pitcnt; |
| |
| if (!has_legacy_pic()) { |
| /* |
| * Relies on tsc_early_delay_calibrate() to have given us semi |
| * usable udelay(), wait for the same 50ms we would have with |
| * the PIT loop below. |
| */ |
| udelay(10 * USEC_PER_MSEC); |
| udelay(10 * USEC_PER_MSEC); |
| udelay(10 * USEC_PER_MSEC); |
| udelay(10 * USEC_PER_MSEC); |
| udelay(10 * USEC_PER_MSEC); |
| return ULONG_MAX; |
| } |
| |
| /* Set the Gate high, disable speaker */ |
| outb((inb(0x61) & ~0x02) | 0x01, 0x61); |
| |
| /* |
| * Setup CTC channel 2* for mode 0, (interrupt on terminal |
| * count mode), binary count. Set the latch register to 50ms |
| * (LSB then MSB) to begin countdown. |
| */ |
| outb(0xb0, 0x43); |
| outb(latch & 0xff, 0x42); |
| outb(latch >> 8, 0x42); |
| |
| tsc = t1 = t2 = get_cycles(); |
| |
| pitcnt = 0; |
| tscmax = 0; |
| tscmin = ULONG_MAX; |
| while ((inb(0x61) & 0x20) == 0) { |
| t2 = get_cycles(); |
| delta = t2 - tsc; |
| tsc = t2; |
| if ((unsigned long) delta < tscmin) |
| tscmin = (unsigned int) delta; |
| if ((unsigned long) delta > tscmax) |
| tscmax = (unsigned int) delta; |
| pitcnt++; |
| } |
| |
| /* |
| * Sanity checks: |
| * |
| * If we were not able to read the PIT more than loopmin |
| * times, then we have been hit by a massive SMI |
| * |
| * If the maximum is 10 times larger than the minimum, |
| * then we got hit by an SMI as well. |
| */ |
| if (pitcnt < loopmin || tscmax > 10 * tscmin) |
| return ULONG_MAX; |
| |
| /* Calculate the PIT value */ |
| delta = t2 - t1; |
| do_div(delta, ms); |
| return delta; |
| } |
| |
| /* |
| * This reads the current MSB of the PIT counter, and |
| * checks if we are running on sufficiently fast and |
| * non-virtualized hardware. |
| * |
| * Our expectations are: |
| * |
| * - the PIT is running at roughly 1.19MHz |
| * |
| * - each IO is going to take about 1us on real hardware, |
| * but we allow it to be much faster (by a factor of 10) or |
| * _slightly_ slower (ie we allow up to a 2us read+counter |
| * update - anything else implies a unacceptably slow CPU |
| * or PIT for the fast calibration to work. |
| * |
| * - with 256 PIT ticks to read the value, we have 214us to |
| * see the same MSB (and overhead like doing a single TSC |
| * read per MSB value etc). |
| * |
| * - We're doing 2 reads per loop (LSB, MSB), and we expect |
| * them each to take about a microsecond on real hardware. |
| * So we expect a count value of around 100. But we'll be |
| * generous, and accept anything over 50. |
| * |
| * - if the PIT is stuck, and we see *many* more reads, we |
| * return early (and the next caller of pit_expect_msb() |
| * then consider it a failure when they don't see the |
| * next expected value). |
| * |
| * These expectations mean that we know that we have seen the |
| * transition from one expected value to another with a fairly |
| * high accuracy, and we didn't miss any events. We can thus |
| * use the TSC value at the transitions to calculate a pretty |
| * good value for the TSC frequencty. |
| */ |
| static inline int pit_verify_msb(unsigned char val) |
| { |
| /* Ignore LSB */ |
| inb(0x42); |
| return inb(0x42) == val; |
| } |
| |
| static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap) |
| { |
| int count; |
| u64 tsc = 0, prev_tsc = 0; |
| |
| for (count = 0; count < 50000; count++) { |
| if (!pit_verify_msb(val)) |
| break; |
| prev_tsc = tsc; |
| tsc = get_cycles(); |
| } |
| *deltap = get_cycles() - prev_tsc; |
| *tscp = tsc; |
| |
| /* |
| * We require _some_ success, but the quality control |
| * will be based on the error terms on the TSC values. |
| */ |
| return count > 5; |
| } |
| |
| /* |
| * How many MSB values do we want to see? We aim for |
| * a maximum error rate of 500ppm (in practice the |
| * real error is much smaller), but refuse to spend |
| * more than 50ms on it. |
| */ |
| #define MAX_QUICK_PIT_MS 50 |
| #define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256) |
| |
| static unsigned long quick_pit_calibrate(void) |
| { |
| int i; |
| u64 tsc, delta; |
| unsigned long d1, d2; |
| |
| if (!has_legacy_pic()) |
| return 0; |
| |
| /* Set the Gate high, disable speaker */ |
| outb((inb(0x61) & ~0x02) | 0x01, 0x61); |
| |
| /* |
| * Counter 2, mode 0 (one-shot), binary count |
| * |
| * NOTE! Mode 2 decrements by two (and then the |
| * output is flipped each time, giving the same |
| * final output frequency as a decrement-by-one), |
| * so mode 0 is much better when looking at the |
| * individual counts. |
| */ |
| outb(0xb0, 0x43); |
| |
| /* Start at 0xffff */ |
| outb(0xff, 0x42); |
| outb(0xff, 0x42); |
| |
| /* |
| * The PIT starts counting at the next edge, so we |
| * need to delay for a microsecond. The easiest way |
| * to do that is to just read back the 16-bit counter |
| * once from the PIT. |
| */ |
| pit_verify_msb(0); |
| |
| if (pit_expect_msb(0xff, &tsc, &d1)) { |
| for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) { |
| if (!pit_expect_msb(0xff-i, &delta, &d2)) |
| break; |
| |
| delta -= tsc; |
| |
| /* |
| * Extrapolate the error and fail fast if the error will |
| * never be below 500 ppm. |
| */ |
| if (i == 1 && |
| d1 + d2 >= (delta * MAX_QUICK_PIT_ITERATIONS) >> 11) |
| return 0; |
| |
| /* |
| * Iterate until the error is less than 500 ppm |
| */ |
| if (d1+d2 >= delta >> 11) |
| continue; |
| |
| /* |
| * Check the PIT one more time to verify that |
| * all TSC reads were stable wrt the PIT. |
| * |
| * This also guarantees serialization of the |
| * last cycle read ('d2') in pit_expect_msb. |
| */ |
| if (!pit_verify_msb(0xfe - i)) |
| break; |
| goto success; |
| } |
| } |
| pr_info("Fast TSC calibration failed\n"); |
| return 0; |
| |
| success: |
| /* |
| * Ok, if we get here, then we've seen the |
| * MSB of the PIT decrement 'i' times, and the |
| * error has shrunk to less than 500 ppm. |
| * |
| * As a result, we can depend on there not being |
| * any odd delays anywhere, and the TSC reads are |
| * reliable (within the error). |
| * |
| * kHz = ticks / time-in-seconds / 1000; |
| * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000 |
| * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000) |
| */ |
| delta *= PIT_TICK_RATE; |
| do_div(delta, i*256*1000); |
| pr_info("Fast TSC calibration using PIT\n"); |
| return delta; |
| } |
| |
| /** |
| * native_calibrate_tsc |
| * Determine TSC frequency via CPUID, else return 0. |
| */ |
| unsigned long native_calibrate_tsc(void) |
| { |
| unsigned int eax_denominator, ebx_numerator, ecx_hz, edx; |
| unsigned int crystal_khz; |
| |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) |
| return 0; |
| |
| if (boot_cpu_data.cpuid_level < 0x15) |
| return 0; |
| |
| eax_denominator = ebx_numerator = ecx_hz = edx = 0; |
| |
| /* CPUID 15H TSC/Crystal ratio, plus optionally Crystal Hz */ |
| cpuid(0x15, &eax_denominator, &ebx_numerator, &ecx_hz, &edx); |
| |
| if (ebx_numerator == 0 || eax_denominator == 0) |
| return 0; |
| |
| crystal_khz = ecx_hz / 1000; |
| |
| /* |
| * Denverton SoCs don't report crystal clock, and also don't support |
| * CPUID.0x16 for the calculation below, so hardcode the 25MHz crystal |
| * clock. |
| */ |
| if (crystal_khz == 0 && |
| boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT_D) |
| crystal_khz = 25000; |
| |
| /* |
| * TSC frequency reported directly by CPUID is a "hardware reported" |
| * frequency and is the most accurate one so far we have. This |
| * is considered a known frequency. |
| */ |
| if (crystal_khz != 0) |
| setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); |
| |
| /* |
| * Some Intel SoCs like Skylake and Kabylake don't report the crystal |
| * clock, but we can easily calculate it to a high degree of accuracy |
| * by considering the crystal ratio and the CPU speed. |
| */ |
| if (crystal_khz == 0 && boot_cpu_data.cpuid_level >= 0x16) { |
| unsigned int eax_base_mhz, ebx, ecx, edx; |
| |
| cpuid(0x16, &eax_base_mhz, &ebx, &ecx, &edx); |
| crystal_khz = eax_base_mhz * 1000 * |
| eax_denominator / ebx_numerator; |
| } |
| |
| if (crystal_khz == 0) |
| return 0; |
| |
| /* |
| * For Atom SoCs TSC is the only reliable clocksource. |
| * Mark TSC reliable so no watchdog on it. |
| */ |
| if (boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT) |
| setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE); |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| /* |
| * The local APIC appears to be fed by the core crystal clock |
| * (which sounds entirely sensible). We can set the global |
| * lapic_timer_period here to avoid having to calibrate the APIC |
| * timer later. |
| */ |
| lapic_timer_period = crystal_khz * 1000 / HZ; |
| #endif |
| |
| return crystal_khz * ebx_numerator / eax_denominator; |
| } |
| |
| static unsigned long cpu_khz_from_cpuid(void) |
| { |
| unsigned int eax_base_mhz, ebx_max_mhz, ecx_bus_mhz, edx; |
| |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) |
| return 0; |
| |
| if (boot_cpu_data.cpuid_level < 0x16) |
| return 0; |
| |
| eax_base_mhz = ebx_max_mhz = ecx_bus_mhz = edx = 0; |
| |
| cpuid(0x16, &eax_base_mhz, &ebx_max_mhz, &ecx_bus_mhz, &edx); |
| |
| return eax_base_mhz * 1000; |
| } |
| |
| /* |
| * calibrate cpu using pit, hpet, and ptimer methods. They are available |
| * later in boot after acpi is initialized. |
| */ |
| static unsigned long pit_hpet_ptimer_calibrate_cpu(void) |
| { |
| u64 tsc1, tsc2, delta, ref1, ref2; |
| unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; |
| unsigned long flags, latch, ms; |
| int hpet = is_hpet_enabled(), i, loopmin; |
| |
| /* |
| * Run 5 calibration loops to get the lowest frequency value |
| * (the best estimate). We use two different calibration modes |
| * here: |
| * |
| * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and |
| * load a timeout of 50ms. We read the time right after we |
| * started the timer and wait until the PIT count down reaches |
| * zero. In each wait loop iteration we read the TSC and check |
| * the delta to the previous read. We keep track of the min |
| * and max values of that delta. The delta is mostly defined |
| * by the IO time of the PIT access, so we can detect when |
| * any disturbance happened between the two reads. If the |
| * maximum time is significantly larger than the minimum time, |
| * then we discard the result and have another try. |
| * |
| * 2) Reference counter. If available we use the HPET or the |
| * PMTIMER as a reference to check the sanity of that value. |
| * We use separate TSC readouts and check inside of the |
| * reference read for any possible disturbance. We dicard |
| * disturbed values here as well. We do that around the PIT |
| * calibration delay loop as we have to wait for a certain |
| * amount of time anyway. |
| */ |
| |
| /* Preset PIT loop values */ |
| latch = CAL_LATCH; |
| ms = CAL_MS; |
| loopmin = CAL_PIT_LOOPS; |
| |
| for (i = 0; i < 3; i++) { |
| unsigned long tsc_pit_khz; |
| |
| /* |
| * Read the start value and the reference count of |
| * hpet/pmtimer when available. Then do the PIT |
| * calibration, which will take at least 50ms, and |
| * read the end value. |
| */ |
| local_irq_save(flags); |
| tsc1 = tsc_read_refs(&ref1, hpet); |
| tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin); |
| tsc2 = tsc_read_refs(&ref2, hpet); |
| local_irq_restore(flags); |
| |
| /* Pick the lowest PIT TSC calibration so far */ |
| tsc_pit_min = min(tsc_pit_min, tsc_pit_khz); |
| |
| /* hpet or pmtimer available ? */ |
| if (ref1 == ref2) |
| continue; |
| |
| /* Check, whether the sampling was disturbed */ |
| if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) |
| continue; |
| |
| tsc2 = (tsc2 - tsc1) * 1000000LL; |
| if (hpet) |
| tsc2 = calc_hpet_ref(tsc2, ref1, ref2); |
| else |
| tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2); |
| |
| tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2); |
| |
| /* Check the reference deviation */ |
| delta = ((u64) tsc_pit_min) * 100; |
| do_div(delta, tsc_ref_min); |
| |
| /* |
| * If both calibration results are inside a 10% window |
| * then we can be sure, that the calibration |
| * succeeded. We break out of the loop right away. We |
| * use the reference value, as it is more precise. |
| */ |
| if (delta >= 90 && delta <= 110) { |
| pr_info("PIT calibration matches %s. %d loops\n", |
| hpet ? "HPET" : "PMTIMER", i + 1); |
| return tsc_ref_min; |
| } |
| |
| /* |
| * Check whether PIT failed more than once. This |
| * happens in virtualized environments. We need to |
| * give the virtual PC a slightly longer timeframe for |
| * the HPET/PMTIMER to make the result precise. |
| */ |
| if (i == 1 && tsc_pit_min == ULONG_MAX) { |
| latch = CAL2_LATCH; |
| ms = CAL2_MS; |
| loopmin = CAL2_PIT_LOOPS; |
| } |
| } |
| |
| /* |
| * Now check the results. |
| */ |
| if (tsc_pit_min == ULONG_MAX) { |
| /* PIT gave no useful value */ |
| pr_warn("Unable to calibrate against PIT\n"); |
| |
| /* We don't have an alternative source, disable TSC */ |
| if (!hpet && !ref1 && !ref2) { |
| pr_notice("No reference (HPET/PMTIMER) available\n"); |
| return 0; |
| } |
| |
| /* The alternative source failed as well, disable TSC */ |
| if (tsc_ref_min == ULONG_MAX) { |
| pr_warn("HPET/PMTIMER calibration failed\n"); |
| return 0; |
| } |
| |
| /* Use the alternative source */ |
| pr_info("using %s reference calibration\n", |
| hpet ? "HPET" : "PMTIMER"); |
| |
| return tsc_ref_min; |
| } |
| |
| /* We don't have an alternative source, use the PIT calibration value */ |
| if (!hpet && !ref1 && !ref2) { |
| pr_info("Using PIT calibration value\n"); |
| return tsc_pit_min; |
| } |
| |
| /* The alternative source failed, use the PIT calibration value */ |
| if (tsc_ref_min == ULONG_MAX) { |
| pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n"); |
| return tsc_pit_min; |
| } |
| |
| /* |
| * The calibration values differ too much. In doubt, we use |
| * the PIT value as we know that there are PMTIMERs around |
| * running at double speed. At least we let the user know: |
| */ |
| pr_warn("PIT calibration deviates from %s: %lu %lu\n", |
| hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min); |
| pr_info("Using PIT calibration value\n"); |
| return tsc_pit_min; |
| } |
| |
| /** |
| * native_calibrate_cpu_early - can calibrate the cpu early in boot |
| */ |
| unsigned long native_calibrate_cpu_early(void) |
| { |
| unsigned long flags, fast_calibrate = cpu_khz_from_cpuid(); |
| |
| if (!fast_calibrate) |
| fast_calibrate = cpu_khz_from_msr(); |
| if (!fast_calibrate) { |
| local_irq_save(flags); |
| fast_calibrate = quick_pit_calibrate(); |
| local_irq_restore(flags); |
| } |
| return fast_calibrate; |
| } |
| |
| |
| /** |
| * native_calibrate_cpu - calibrate the cpu |
| */ |
| static unsigned long native_calibrate_cpu(void) |
| { |
| unsigned long tsc_freq = native_calibrate_cpu_early(); |
| |
| if (!tsc_freq) |
| tsc_freq = pit_hpet_ptimer_calibrate_cpu(); |
| |
| return tsc_freq; |
| } |
| |
| void recalibrate_cpu_khz(void) |
| { |
| #ifndef CONFIG_SMP |
| unsigned long cpu_khz_old = cpu_khz; |
| |
| if (!boot_cpu_has(X86_FEATURE_TSC)) |
| return; |
| |
| cpu_khz = x86_platform.calibrate_cpu(); |
| tsc_khz = x86_platform.calibrate_tsc(); |
| if (tsc_khz == 0) |
| tsc_khz = cpu_khz; |
| else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) |
| cpu_khz = tsc_khz; |
| cpu_data(0).loops_per_jiffy = cpufreq_scale(cpu_data(0).loops_per_jiffy, |
| cpu_khz_old, cpu_khz); |
| #endif |
| } |
| |
| EXPORT_SYMBOL(recalibrate_cpu_khz); |
| |
| |
| static unsigned long long cyc2ns_suspend; |
| |
| void tsc_save_sched_clock_state(void) |
| { |
| if (!sched_clock_stable()) |
| return; |
| |
| cyc2ns_suspend = sched_clock(); |
| } |
| |
| /* |
| * Even on processors with invariant TSC, TSC gets reset in some the |
| * ACPI system sleep states. And in some systems BIOS seem to reinit TSC to |
| * arbitrary value (still sync'd across cpu's) during resume from such sleep |
| * states. To cope up with this, recompute the cyc2ns_offset for each cpu so |
| * that sched_clock() continues from the point where it was left off during |
| * suspend. |
| */ |
| void tsc_restore_sched_clock_state(void) |
| { |
| unsigned long long offset; |
| unsigned long flags; |
| int cpu; |
| |
| if (!sched_clock_stable()) |
| return; |
| |
| local_irq_save(flags); |
| |
| /* |
| * We're coming out of suspend, there's no concurrency yet; don't |
| * bother being nice about the RCU stuff, just write to both |
| * data fields. |
| */ |
| |
| this_cpu_write(cyc2ns.data[0].cyc2ns_offset, 0); |
| this_cpu_write(cyc2ns.data[1].cyc2ns_offset, 0); |
| |
| offset = cyc2ns_suspend - sched_clock(); |
| |
| for_each_possible_cpu(cpu) { |
| per_cpu(cyc2ns.data[0].cyc2ns_offset, cpu) = offset; |
| per_cpu(cyc2ns.data[1].cyc2ns_offset, cpu) = offset; |
| } |
| |
| local_irq_restore(flags); |
| } |
| |
| #ifdef CONFIG_CPU_FREQ |
| /* |
| * Frequency scaling support. Adjust the TSC based timer when the CPU frequency |
| * changes. |
| * |
| * NOTE: On SMP the situation is not fixable in general, so simply mark the TSC |
| * as unstable and give up in those cases. |
| * |
| * Should fix up last_tsc too. Currently gettimeofday in the |
| * first tick after the change will be slightly wrong. |
| */ |
| |
| static unsigned int ref_freq; |
| static unsigned long loops_per_jiffy_ref; |
| static unsigned long tsc_khz_ref; |
| |
| static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, |
| void *data) |
| { |
| struct cpufreq_freqs *freq = data; |
| |
| if (num_online_cpus() > 1) { |
| mark_tsc_unstable("cpufreq changes on SMP"); |
| return 0; |
| } |
| |
| if (!ref_freq) { |
| ref_freq = freq->old; |
| loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy; |
| tsc_khz_ref = tsc_khz; |
| } |
| |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) { |
| boot_cpu_data.loops_per_jiffy = |
| cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); |
| |
| tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) |
| mark_tsc_unstable("cpufreq changes"); |
| |
| set_cyc2ns_scale(tsc_khz, freq->policy->cpu, rdtsc()); |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block time_cpufreq_notifier_block = { |
| .notifier_call = time_cpufreq_notifier |
| }; |
| |
| static int __init cpufreq_register_tsc_scaling(void) |
| { |
| if (!boot_cpu_has(X86_FEATURE_TSC)) |
| return 0; |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) |
| return 0; |
| cpufreq_register_notifier(&time_cpufreq_notifier_block, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| return 0; |
| } |
| |
| core_initcall(cpufreq_register_tsc_scaling); |
| |
| #endif /* CONFIG_CPU_FREQ */ |
| |
| #define ART_CPUID_LEAF (0x15) |
| #define ART_MIN_DENOMINATOR (1) |
| |
| |
| /* |
| * If ART is present detect the numerator:denominator to convert to TSC |
| */ |
| static void __init detect_art(void) |
| { |
| unsigned int unused[2]; |
| |
| if (boot_cpu_data.cpuid_level < ART_CPUID_LEAF) |
| return; |
| |
| /* |
| * Don't enable ART in a VM, non-stop TSC and TSC_ADJUST required, |
| * and the TSC counter resets must not occur asynchronously. |
| */ |
| if (boot_cpu_has(X86_FEATURE_HYPERVISOR) || |
| !boot_cpu_has(X86_FEATURE_NONSTOP_TSC) || |
| !boot_cpu_has(X86_FEATURE_TSC_ADJUST) || |
| tsc_async_resets) |
| return; |
| |
| cpuid(ART_CPUID_LEAF, &art_to_tsc_denominator, |
| &art_to_tsc_numerator, unused, unused+1); |
| |
| if (art_to_tsc_denominator < ART_MIN_DENOMINATOR) |
| return; |
| |
| rdmsrl(MSR_IA32_TSC_ADJUST, art_to_tsc_offset); |
| |
| /* Make this sticky over multiple CPU init calls */ |
| setup_force_cpu_cap(X86_FEATURE_ART); |
| } |
| |
| |
| /* clocksource code */ |
| |
| static void tsc_resume(struct clocksource *cs) |
| { |
| tsc_verify_tsc_adjust(true); |
| } |
| |
| /* |
| * We used to compare the TSC to the cycle_last value in the clocksource |
| * structure to avoid a nasty time-warp. This can be observed in a |
| * very small window right after one CPU updated cycle_last under |
| * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which |
| * is smaller than the cycle_last reference value due to a TSC which |
| * is slighty behind. This delta is nowhere else observable, but in |
| * that case it results in a forward time jump in the range of hours |
| * due to the unsigned delta calculation of the time keeping core |
| * code, which is necessary to support wrapping clocksources like pm |
| * timer. |
| * |
| * This sanity check is now done in the core timekeeping code. |
| * checking the result of read_tsc() - cycle_last for being negative. |
| * That works because CLOCKSOURCE_MASK(64) does not mask out any bit. |
| */ |
| static u64 read_tsc(struct clocksource *cs) |
| { |
| return (u64)rdtsc_ordered(); |
| } |
| |
| static void tsc_cs_mark_unstable(struct clocksource *cs) |
| { |
| if (tsc_unstable) |
| return; |
| |
| tsc_unstable = 1; |
| if (using_native_sched_clock()) |
| clear_sched_clock_stable(); |
| disable_sched_clock_irqtime(); |
| pr_info("Marking TSC unstable due to clocksource watchdog\n"); |
| } |
| |
| static void tsc_cs_tick_stable(struct clocksource *cs) |
| { |
| if (tsc_unstable) |
| return; |
| |
| if (using_native_sched_clock()) |
| sched_clock_tick_stable(); |
| } |
| |
| /* |
| * .mask MUST be CLOCKSOURCE_MASK(64). See comment above read_tsc() |
| */ |
| static struct clocksource clocksource_tsc_early = { |
| .name = "tsc-early", |
| .rating = 299, |
| .read = read_tsc, |
| .mask = CLOCKSOURCE_MASK(64), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS | |
| CLOCK_SOURCE_MUST_VERIFY, |
| .archdata = { .vclock_mode = VCLOCK_TSC }, |
| .resume = tsc_resume, |
| .mark_unstable = tsc_cs_mark_unstable, |
| .tick_stable = tsc_cs_tick_stable, |
| .list = LIST_HEAD_INIT(clocksource_tsc_early.list), |
| }; |
| |
| /* |
| * Must mark VALID_FOR_HRES early such that when we unregister tsc_early |
| * this one will immediately take over. We will only register if TSC has |
| * been found good. |
| */ |
| static struct clocksource clocksource_tsc = { |
| .name = "tsc", |
| .rating = 300, |
| .read = read_tsc, |
| .mask = CLOCKSOURCE_MASK(64), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS | |
| CLOCK_SOURCE_VALID_FOR_HRES | |
| CLOCK_SOURCE_MUST_VERIFY, |
| .archdata = { .vclock_mode = VCLOCK_TSC }, |
| .resume = tsc_resume, |
| .mark_unstable = tsc_cs_mark_unstable, |
| .tick_stable = tsc_cs_tick_stable, |
| .list = LIST_HEAD_INIT(clocksource_tsc.list), |
| }; |
| |
| void mark_tsc_unstable(char *reason) |
| { |
| if (tsc_unstable) |
| return; |
| |
| tsc_unstable = 1; |
| if (using_native_sched_clock()) |
| clear_sched_clock_stable(); |
| disable_sched_clock_irqtime(); |
| pr_info("Marking TSC unstable due to %s\n", reason); |
| |
| clocksource_mark_unstable(&clocksource_tsc_early); |
| clocksource_mark_unstable(&clocksource_tsc); |
| } |
| |
| EXPORT_SYMBOL_GPL(mark_tsc_unstable); |
| |
| static void __init tsc_disable_clocksource_watchdog(void) |
| { |
| clocksource_tsc_early.flags &= ~CLOCK_SOURCE_MUST_VERIFY; |
| clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; |
| } |
| |
| static void __init check_system_tsc_reliable(void) |
| { |
| #if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC) |
| if (is_geode_lx()) { |
| /* RTSC counts during suspend */ |
| #define RTSC_SUSP 0x100 |
| unsigned long res_low, res_high; |
| |
| rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high); |
| /* Geode_LX - the OLPC CPU has a very reliable TSC */ |
| if (res_low & RTSC_SUSP) |
| tsc_clocksource_reliable = 1; |
| } |
| #endif |
| if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) |
| tsc_clocksource_reliable = 1; |
| |
| /* |
| * Disable the clocksource watchdog when the system has: |
| * - TSC running at constant frequency |
| * - TSC which does not stop in C-States |
| * - the TSC_ADJUST register which allows to detect even minimal |
| * modifications |
| * - not more than two sockets. As the number of sockets cannot be |
| * evaluated at the early boot stage where this has to be |
| * invoked, check the number of online memory nodes as a |
| * fallback solution which is an reasonable estimate. |
| */ |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && |
| boot_cpu_has(X86_FEATURE_NONSTOP_TSC) && |
| boot_cpu_has(X86_FEATURE_TSC_ADJUST) && |
| nr_online_nodes <= 2) |
| tsc_disable_clocksource_watchdog(); |
| } |
| |
| /* |
| * Make an educated guess if the TSC is trustworthy and synchronized |
| * over all CPUs. |
| */ |
| int unsynchronized_tsc(void) |
| { |
| if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_unstable) |
| return 1; |
| |
| #ifdef CONFIG_SMP |
| if (apic_is_clustered_box()) |
| return 1; |
| #endif |
| |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) |
| return 0; |
| |
| if (tsc_clocksource_reliable) |
| return 0; |
| /* |
| * Intel systems are normally all synchronized. |
| * Exceptions must mark TSC as unstable: |
| */ |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { |
| /* assume multi socket systems are not synchronized: */ |
| if (num_possible_cpus() > 1) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Convert ART to TSC given numerator/denominator found in detect_art() |
| */ |
| struct system_counterval_t convert_art_to_tsc(u64 art) |
| { |
| u64 tmp, res, rem; |
| |
| rem = do_div(art, art_to_tsc_denominator); |
| |
| res = art * art_to_tsc_numerator; |
| tmp = rem * art_to_tsc_numerator; |
| |
| do_div(tmp, art_to_tsc_denominator); |
| res += tmp + art_to_tsc_offset; |
| |
| return (struct system_counterval_t) {.cs = art_related_clocksource, |
| .cycles = res}; |
| } |
| EXPORT_SYMBOL(convert_art_to_tsc); |
| |
| /** |
| * convert_art_ns_to_tsc() - Convert ART in nanoseconds to TSC. |
| * @art_ns: ART (Always Running Timer) in unit of nanoseconds |
| * |
| * PTM requires all timestamps to be in units of nanoseconds. When user |
| * software requests a cross-timestamp, this function converts system timestamp |
| * to TSC. |
| * |
| * This is valid when CPU feature flag X86_FEATURE_TSC_KNOWN_FREQ is set |
| * indicating the tsc_khz is derived from CPUID[15H]. Drivers should check |
| * that this flag is set before conversion to TSC is attempted. |
| * |
| * Return: |
| * struct system_counterval_t - system counter value with the pointer to the |
| * corresponding clocksource |
| * @cycles: System counter value |
| * @cs: Clocksource corresponding to system counter value. Used |
| * by timekeeping code to verify comparibility of two cycle |
| * values. |
| */ |
| |
| struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns) |
| { |
| u64 tmp, res, rem; |
| |
| rem = do_div(art_ns, USEC_PER_SEC); |
| |
| res = art_ns * tsc_khz; |
| tmp = rem * tsc_khz; |
| |
| do_div(tmp, USEC_PER_SEC); |
| res += tmp; |
| |
| return (struct system_counterval_t) { .cs = art_related_clocksource, |
| .cycles = res}; |
| } |
| EXPORT_SYMBOL(convert_art_ns_to_tsc); |
| |
| |
| static void tsc_refine_calibration_work(struct work_struct *work); |
| static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work); |
| /** |
| * tsc_refine_calibration_work - Further refine tsc freq calibration |
| * @work - ignored. |
| * |
| * This functions uses delayed work over a period of a |
| * second to further refine the TSC freq value. Since this is |
| * timer based, instead of loop based, we don't block the boot |
| * process while this longer calibration is done. |
| * |
| * If there are any calibration anomalies (too many SMIs, etc), |
| * or the refined calibration is off by 1% of the fast early |
| * calibration, we throw out the new calibration and use the |
| * early calibration. |
| */ |
| static void tsc_refine_calibration_work(struct work_struct *work) |
| { |
| static u64 tsc_start = ULLONG_MAX, ref_start; |
| static int hpet; |
| u64 tsc_stop, ref_stop, delta; |
| unsigned long freq; |
| int cpu; |
| |
| /* Don't bother refining TSC on unstable systems */ |
| if (tsc_unstable) |
| goto unreg; |
| |
| /* |
| * Since the work is started early in boot, we may be |
| * delayed the first time we expire. So set the workqueue |
| * again once we know timers are working. |
| */ |
| if (tsc_start == ULLONG_MAX) { |
| restart: |
| /* |
| * Only set hpet once, to avoid mixing hardware |
| * if the hpet becomes enabled later. |
| */ |
| hpet = is_hpet_enabled(); |
| tsc_start = tsc_read_refs(&ref_start, hpet); |
| schedule_delayed_work(&tsc_irqwork, HZ); |
| return; |
| } |
| |
| tsc_stop = tsc_read_refs(&ref_stop, hpet); |
| |
| /* hpet or pmtimer available ? */ |
| if (ref_start == ref_stop) |
| goto out; |
| |
| /* Check, whether the sampling was disturbed */ |
| if (tsc_stop == ULLONG_MAX) |
| goto restart; |
| |
| delta = tsc_stop - tsc_start; |
| delta *= 1000000LL; |
| if (hpet) |
| freq = calc_hpet_ref(delta, ref_start, ref_stop); |
| else |
| freq = calc_pmtimer_ref(delta, ref_start, ref_stop); |
| |
| /* Make sure we're within 1% */ |
| if (abs(tsc_khz - freq) > tsc_khz/100) |
| goto out; |
| |
| tsc_khz = freq; |
| pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n", |
| (unsigned long)tsc_khz / 1000, |
| (unsigned long)tsc_khz % 1000); |
| |
| /* Inform the TSC deadline clockevent devices about the recalibration */ |
| lapic_update_tsc_freq(); |
| |
| /* Update the sched_clock() rate to match the clocksource one */ |
| for_each_possible_cpu(cpu) |
| set_cyc2ns_scale(tsc_khz, cpu, tsc_stop); |
| |
| out: |
| if (tsc_unstable) |
| goto unreg; |
| |
| if (boot_cpu_has(X86_FEATURE_ART)) |
| art_related_clocksource = &clocksource_tsc; |
| clocksource_register_khz(&clocksource_tsc, tsc_khz); |
| unreg: |
| clocksource_unregister(&clocksource_tsc_early); |
| } |
| |
| |
| static int __init init_tsc_clocksource(void) |
| { |
| if (!boot_cpu_has(X86_FEATURE_TSC) || !tsc_khz) |
| return 0; |
| |
| if (tsc_unstable) |
| goto unreg; |
| |
| if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3)) |
| clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; |
| |
| /* |
| * When TSC frequency is known (retrieved via MSR or CPUID), we skip |
| * the refined calibration and directly register it as a clocksource. |
| */ |
| if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) { |
| if (boot_cpu_has(X86_FEATURE_ART)) |
| art_related_clocksource = &clocksource_tsc; |
| clocksource_register_khz(&clocksource_tsc, tsc_khz); |
| unreg: |
| clocksource_unregister(&clocksource_tsc_early); |
| return 0; |
| } |
| |
| schedule_delayed_work(&tsc_irqwork, 0); |
| return 0; |
| } |
| /* |
| * We use device_initcall here, to ensure we run after the hpet |
| * is fully initialized, which may occur at fs_initcall time. |
| */ |
| device_initcall(init_tsc_clocksource); |
| |
| static bool __init determine_cpu_tsc_frequencies(bool early) |
| { |
| /* Make sure that cpu and tsc are not already calibrated */ |
| WARN_ON(cpu_khz || tsc_khz); |
| |
| if (early) { |
| cpu_khz = x86_platform.calibrate_cpu(); |
| tsc_khz = x86_platform.calibrate_tsc(); |
| } else { |
| /* We should not be here with non-native cpu calibration */ |
| WARN_ON(x86_platform.calibrate_cpu != native_calibrate_cpu); |
| cpu_khz = pit_hpet_ptimer_calibrate_cpu(); |
| } |
| |
| /* |
| * Trust non-zero tsc_khz as authoritative, |
| * and use it to sanity check cpu_khz, |
| * which will be off if system timer is off. |
| */ |
| if (tsc_khz == 0) |
| tsc_khz = cpu_khz; |
| else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) |
| cpu_khz = tsc_khz; |
| |
| if (tsc_khz == 0) |
| return false; |
| |
| pr_info("Detected %lu.%03lu MHz processor\n", |
| (unsigned long)cpu_khz / KHZ, |
| (unsigned long)cpu_khz % KHZ); |
| |
| if (cpu_khz != tsc_khz) { |
| pr_info("Detected %lu.%03lu MHz TSC", |
| (unsigned long)tsc_khz / KHZ, |
| (unsigned long)tsc_khz % KHZ); |
| } |
| return true; |
| } |
| |
| static unsigned long __init get_loops_per_jiffy(void) |
| { |
| u64 lpj = (u64)tsc_khz * KHZ; |
| |
| do_div(lpj, HZ); |
| return lpj; |
| } |
| |
| static void __init tsc_enable_sched_clock(void) |
| { |
| /* Sanitize TSC ADJUST before cyc2ns gets initialized */ |
| tsc_store_and_check_tsc_adjust(true); |
| cyc2ns_init_boot_cpu(); |
| static_branch_enable(&__use_tsc); |
| } |
| |
| void __init tsc_early_init(void) |
| { |
| if (!boot_cpu_has(X86_FEATURE_TSC)) |
| return; |
| /* Don't change UV TSC multi-chassis synchronization */ |
| if (is_early_uv_system()) |
| return; |
| if (!determine_cpu_tsc_frequencies(true)) |
| return; |
| loops_per_jiffy = get_loops_per_jiffy(); |
| |
| tsc_enable_sched_clock(); |
| } |
| |
| void __init tsc_init(void) |
| { |
| /* |
| * native_calibrate_cpu_early can only calibrate using methods that are |
| * available early in boot. |
| */ |
| if (x86_platform.calibrate_cpu == native_calibrate_cpu_early) |
| x86_platform.calibrate_cpu = native_calibrate_cpu; |
| |
| if (!boot_cpu_has(X86_FEATURE_TSC)) { |
| setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER); |
| return; |
| } |
| |
| if (!tsc_khz) { |
| /* We failed to determine frequencies earlier, try again */ |
| if (!determine_cpu_tsc_frequencies(false)) { |
| mark_tsc_unstable("could not calculate TSC khz"); |
| setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER); |
| return; |
| } |
| tsc_enable_sched_clock(); |
| } |
| |
| cyc2ns_init_secondary_cpus(); |
| |
| if (!no_sched_irq_time) |
| enable_sched_clock_irqtime(); |
| |
| lpj_fine = get_loops_per_jiffy(); |
| use_tsc_delay(); |
| |
| check_system_tsc_reliable(); |
| |
| if (unsynchronized_tsc()) { |
| mark_tsc_unstable("TSCs unsynchronized"); |
| return; |
| } |
| |
| if (tsc_clocksource_reliable || no_tsc_watchdog) |
| tsc_disable_clocksource_watchdog(); |
| |
| clocksource_register_khz(&clocksource_tsc_early, tsc_khz); |
| detect_art(); |
| } |
| |
| #ifdef CONFIG_SMP |
| /* |
| * If we have a constant TSC and are using the TSC for the delay loop, |
| * we can skip clock calibration if another cpu in the same socket has already |
| * been calibrated. This assumes that CONSTANT_TSC applies to all |
| * cpus in the socket - this should be a safe assumption. |
| */ |
| unsigned long calibrate_delay_is_known(void) |
| { |
| int sibling, cpu = smp_processor_id(); |
| int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); |
| const struct cpumask *mask = topology_core_cpumask(cpu); |
| |
| if (!constant_tsc || !mask) |
| return 0; |
| |
| sibling = cpumask_any_but(mask, cpu); |
| if (sibling < nr_cpu_ids) |
| return cpu_data(sibling).loops_per_jiffy; |
| return 0; |
| } |
| #endif |