| /* | |
| * INET 802.1Q VLAN | |
| * Ethernet-type device handling. | |
| * | |
| * Authors: Ben Greear <greearb@candelatech.com> | |
| * Please send support related email to: vlan@scry.wanfear.com | |
| * VLAN Home Page: http://www.candelatech.com/~greear/vlan.html | |
| * | |
| * Fixes: | |
| * Fix for packet capture - Nick Eggleston <nick@dccinc.com>; | |
| * Add HW acceleration hooks - David S. Miller <davem@redhat.com>; | |
| * Correct all the locking - David S. Miller <davem@redhat.com>; | |
| * Use hash table for VLAN groups - David S. Miller <davem@redhat.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <asm/uaccess.h> /* for copy_from_user */ | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <net/datalink.h> | |
| #include <linux/mm.h> | |
| #include <linux/in.h> | |
| #include <linux/init.h> | |
| #include <net/p8022.h> | |
| #include <net/arp.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/notifier.h> | |
| #include <linux/if_vlan.h> | |
| #include "vlan.h" | |
| #include "vlanproc.h" | |
| #define DRV_VERSION "1.8" | |
| /* Global VLAN variables */ | |
| /* Our listing of VLAN group(s) */ | |
| static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE]; | |
| #define vlan_grp_hashfn(IDX) ((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK) | |
| static char vlan_fullname[] = "802.1Q VLAN Support"; | |
| static char vlan_version[] = DRV_VERSION; | |
| static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>"; | |
| static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>"; | |
| static int vlan_device_event(struct notifier_block *, unsigned long, void *); | |
| static int vlan_ioctl_handler(void __user *); | |
| static int unregister_vlan_dev(struct net_device *, unsigned short ); | |
| static struct notifier_block vlan_notifier_block = { | |
| .notifier_call = vlan_device_event, | |
| }; | |
| /* These may be changed at run-time through IOCTLs */ | |
| /* Determines interface naming scheme. */ | |
| unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; | |
| static struct packet_type vlan_packet_type = { | |
| .type = __constant_htons(ETH_P_8021Q), | |
| .func = vlan_skb_recv, /* VLAN receive method */ | |
| }; | |
| /* Bits of netdev state that are propagated from real device to virtual */ | |
| #define VLAN_LINK_STATE_MASK \ | |
| ((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER)) | |
| /* End of global variables definitions. */ | |
| /* | |
| * Function vlan_proto_init (pro) | |
| * | |
| * Initialize VLAN protocol layer, | |
| * | |
| */ | |
| static int __init vlan_proto_init(void) | |
| { | |
| int err; | |
| printk(VLAN_INF "%s v%s %s\n", | |
| vlan_fullname, vlan_version, vlan_copyright); | |
| printk(VLAN_INF "All bugs added by %s\n", | |
| vlan_buggyright); | |
| /* proc file system initialization */ | |
| err = vlan_proc_init(); | |
| if (err < 0) { | |
| printk(KERN_ERR | |
| "%s %s: can't create entry in proc filesystem!\n", | |
| __FUNCTION__, VLAN_NAME); | |
| return err; | |
| } | |
| dev_add_pack(&vlan_packet_type); | |
| /* Register us to receive netdevice events */ | |
| err = register_netdevice_notifier(&vlan_notifier_block); | |
| if (err < 0) { | |
| dev_remove_pack(&vlan_packet_type); | |
| vlan_proc_cleanup(); | |
| return err; | |
| } | |
| vlan_ioctl_set(vlan_ioctl_handler); | |
| return 0; | |
| } | |
| /* Cleanup all vlan devices | |
| * Note: devices that have been registered that but not | |
| * brought up will exist but have no module ref count. | |
| */ | |
| static void __exit vlan_cleanup_devices(void) | |
| { | |
| struct net_device *dev, *nxt; | |
| rtnl_lock(); | |
| for (dev = dev_base; dev; dev = nxt) { | |
| nxt = dev->next; | |
| if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
| unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | |
| VLAN_DEV_INFO(dev)->vlan_id); | |
| unregister_netdevice(dev); | |
| } | |
| } | |
| rtnl_unlock(); | |
| } | |
| /* | |
| * Module 'remove' entry point. | |
| * o delete /proc/net/router directory and static entries. | |
| */ | |
| static void __exit vlan_cleanup_module(void) | |
| { | |
| int i; | |
| vlan_ioctl_set(NULL); | |
| /* Un-register us from receiving netdevice events */ | |
| unregister_netdevice_notifier(&vlan_notifier_block); | |
| dev_remove_pack(&vlan_packet_type); | |
| vlan_cleanup_devices(); | |
| /* This table must be empty if there are no module | |
| * references left. | |
| */ | |
| for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) { | |
| BUG_ON(!hlist_empty(&vlan_group_hash[i])); | |
| } | |
| vlan_proc_cleanup(); | |
| synchronize_net(); | |
| } | |
| module_init(vlan_proto_init); | |
| module_exit(vlan_cleanup_module); | |
| /* Must be invoked with RCU read lock (no preempt) */ | |
| static struct vlan_group *__vlan_find_group(int real_dev_ifindex) | |
| { | |
| struct vlan_group *grp; | |
| struct hlist_node *n; | |
| int hash = vlan_grp_hashfn(real_dev_ifindex); | |
| hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) { | |
| if (grp->real_dev_ifindex == real_dev_ifindex) | |
| return grp; | |
| } | |
| return NULL; | |
| } | |
| /* Find the protocol handler. Assumes VID < VLAN_VID_MASK. | |
| * | |
| * Must be invoked with RCU read lock (no preempt) | |
| */ | |
| struct net_device *__find_vlan_dev(struct net_device *real_dev, | |
| unsigned short VID) | |
| { | |
| struct vlan_group *grp = __vlan_find_group(real_dev->ifindex); | |
| if (grp) | |
| return grp->vlan_devices[VID]; | |
| return NULL; | |
| } | |
| static void vlan_rcu_free(struct rcu_head *rcu) | |
| { | |
| kfree(container_of(rcu, struct vlan_group, rcu)); | |
| } | |
| /* This returns 0 if everything went fine. | |
| * It will return 1 if the group was killed as a result. | |
| * A negative return indicates failure. | |
| * | |
| * The RTNL lock must be held. | |
| */ | |
| static int unregister_vlan_dev(struct net_device *real_dev, | |
| unsigned short vlan_id) | |
| { | |
| struct net_device *dev = NULL; | |
| int real_dev_ifindex = real_dev->ifindex; | |
| struct vlan_group *grp; | |
| int i, ret; | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id); | |
| #endif | |
| /* sanity check */ | |
| if (vlan_id >= VLAN_VID_MASK) | |
| return -EINVAL; | |
| ASSERT_RTNL(); | |
| grp = __vlan_find_group(real_dev_ifindex); | |
| ret = 0; | |
| if (grp) { | |
| dev = grp->vlan_devices[vlan_id]; | |
| if (dev) { | |
| /* Remove proc entry */ | |
| vlan_proc_rem_dev(dev); | |
| /* Take it out of our own structures, but be sure to | |
| * interlock with HW accelerating devices or SW vlan | |
| * input packet processing. | |
| */ | |
| if (real_dev->features & | |
| (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) { | |
| real_dev->vlan_rx_kill_vid(real_dev, vlan_id); | |
| } | |
| grp->vlan_devices[vlan_id] = NULL; | |
| synchronize_net(); | |
| /* Caller unregisters (and if necessary, puts) | |
| * VLAN device, but we get rid of the reference to | |
| * real_dev here. | |
| */ | |
| dev_put(real_dev); | |
| /* If the group is now empty, kill off the | |
| * group. | |
| */ | |
| for (i = 0; i < VLAN_VID_MASK; i++) | |
| if (grp->vlan_devices[i]) | |
| break; | |
| if (i == VLAN_VID_MASK) { | |
| if (real_dev->features & NETIF_F_HW_VLAN_RX) | |
| real_dev->vlan_rx_register(real_dev, NULL); | |
| hlist_del_rcu(&grp->hlist); | |
| /* Free the group, after all cpu's are done. */ | |
| call_rcu(&grp->rcu, vlan_rcu_free); | |
| grp = NULL; | |
| ret = 1; | |
| } | |
| } | |
| } | |
| return ret; | |
| } | |
| static int unregister_vlan_device(const char *vlan_IF_name) | |
| { | |
| struct net_device *dev = NULL; | |
| int ret; | |
| dev = dev_get_by_name(vlan_IF_name); | |
| ret = -EINVAL; | |
| if (dev) { | |
| if (dev->priv_flags & IFF_802_1Q_VLAN) { | |
| rtnl_lock(); | |
| ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev, | |
| VLAN_DEV_INFO(dev)->vlan_id); | |
| dev_put(dev); | |
| unregister_netdevice(dev); | |
| rtnl_unlock(); | |
| if (ret == 1) | |
| ret = 0; | |
| } else { | |
| printk(VLAN_ERR | |
| "%s: ERROR: Tried to remove a non-vlan device " | |
| "with VLAN code, name: %s priv_flags: %hX\n", | |
| __FUNCTION__, dev->name, dev->priv_flags); | |
| dev_put(dev); | |
| ret = -EPERM; | |
| } | |
| } else { | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__); | |
| #endif | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static void vlan_setup(struct net_device *new_dev) | |
| { | |
| SET_MODULE_OWNER(new_dev); | |
| /* new_dev->ifindex = 0; it will be set when added to | |
| * the global list. | |
| * iflink is set as well. | |
| */ | |
| new_dev->get_stats = vlan_dev_get_stats; | |
| /* Make this thing known as a VLAN device */ | |
| new_dev->priv_flags |= IFF_802_1Q_VLAN; | |
| /* Set us up to have no queue, as the underlying Hardware device | |
| * can do all the queueing we could want. | |
| */ | |
| new_dev->tx_queue_len = 0; | |
| /* set up method calls */ | |
| new_dev->change_mtu = vlan_dev_change_mtu; | |
| new_dev->open = vlan_dev_open; | |
| new_dev->stop = vlan_dev_stop; | |
| new_dev->set_mac_address = vlan_dev_set_mac_address; | |
| new_dev->set_multicast_list = vlan_dev_set_multicast_list; | |
| new_dev->destructor = free_netdev; | |
| new_dev->do_ioctl = vlan_dev_ioctl; | |
| } | |
| /* Attach a VLAN device to a mac address (ie Ethernet Card). | |
| * Returns the device that was created, or NULL if there was | |
| * an error of some kind. | |
| */ | |
| static struct net_device *register_vlan_device(const char *eth_IF_name, | |
| unsigned short VLAN_ID) | |
| { | |
| struct vlan_group *grp; | |
| struct net_device *new_dev; | |
| struct net_device *real_dev; /* the ethernet device */ | |
| char name[IFNAMSIZ]; | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n", | |
| __FUNCTION__, eth_IF_name, VLAN_ID); | |
| #endif | |
| if (VLAN_ID >= VLAN_VID_MASK) | |
| goto out_ret_null; | |
| /* find the device relating to eth_IF_name. */ | |
| real_dev = dev_get_by_name(eth_IF_name); | |
| if (!real_dev) | |
| goto out_ret_null; | |
| if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { | |
| printk(VLAN_DBG "%s: VLANs not supported on %s.\n", | |
| __FUNCTION__, real_dev->name); | |
| goto out_put_dev; | |
| } | |
| if ((real_dev->features & NETIF_F_HW_VLAN_RX) && | |
| (real_dev->vlan_rx_register == NULL || | |
| real_dev->vlan_rx_kill_vid == NULL)) { | |
| printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | |
| __FUNCTION__, real_dev->name); | |
| goto out_put_dev; | |
| } | |
| if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) && | |
| (real_dev->vlan_rx_add_vid == NULL || | |
| real_dev->vlan_rx_kill_vid == NULL)) { | |
| printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n", | |
| __FUNCTION__, real_dev->name); | |
| goto out_put_dev; | |
| } | |
| /* From this point on, all the data structures must remain | |
| * consistent. | |
| */ | |
| rtnl_lock(); | |
| /* The real device must be up and operating in order to | |
| * assosciate a VLAN device with it. | |
| */ | |
| if (!(real_dev->flags & IFF_UP)) | |
| goto out_unlock; | |
| if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) { | |
| /* was already registered. */ | |
| printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__); | |
| goto out_unlock; | |
| } | |
| /* Gotta set up the fields for the device. */ | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n", | |
| vlan_name_type); | |
| #endif | |
| switch (vlan_name_type) { | |
| case VLAN_NAME_TYPE_RAW_PLUS_VID: | |
| /* name will look like: eth1.0005 */ | |
| snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID); | |
| break; | |
| case VLAN_NAME_TYPE_PLUS_VID_NO_PAD: | |
| /* Put our vlan.VID in the name. | |
| * Name will look like: vlan5 | |
| */ | |
| snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID); | |
| break; | |
| case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD: | |
| /* Put our vlan.VID in the name. | |
| * Name will look like: eth0.5 | |
| */ | |
| snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID); | |
| break; | |
| case VLAN_NAME_TYPE_PLUS_VID: | |
| /* Put our vlan.VID in the name. | |
| * Name will look like: vlan0005 | |
| */ | |
| default: | |
| snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID); | |
| }; | |
| new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, | |
| vlan_setup); | |
| if (new_dev == NULL) | |
| goto out_unlock; | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name); | |
| #endif | |
| /* IFF_BROADCAST|IFF_MULTICAST; ??? */ | |
| new_dev->flags = real_dev->flags; | |
| new_dev->flags &= ~IFF_UP; | |
| new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK; | |
| /* need 4 bytes for extra VLAN header info, | |
| * hope the underlying device can handle it. | |
| */ | |
| new_dev->mtu = real_dev->mtu; | |
| /* TODO: maybe just assign it to be ETHERNET? */ | |
| new_dev->type = real_dev->type; | |
| new_dev->hard_header_len = real_dev->hard_header_len; | |
| if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) { | |
| /* Regular ethernet + 4 bytes (18 total). */ | |
| new_dev->hard_header_len += VLAN_HLEN; | |
| } | |
| VLAN_MEM_DBG("new_dev->priv malloc, addr: %p size: %i\n", | |
| new_dev->priv, | |
| sizeof(struct vlan_dev_info)); | |
| memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len); | |
| memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len); | |
| new_dev->addr_len = real_dev->addr_len; | |
| if (real_dev->features & NETIF_F_HW_VLAN_TX) { | |
| new_dev->hard_header = real_dev->hard_header; | |
| new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit; | |
| new_dev->rebuild_header = real_dev->rebuild_header; | |
| } else { | |
| new_dev->hard_header = vlan_dev_hard_header; | |
| new_dev->hard_start_xmit = vlan_dev_hard_start_xmit; | |
| new_dev->rebuild_header = vlan_dev_rebuild_header; | |
| } | |
| new_dev->hard_header_parse = real_dev->hard_header_parse; | |
| VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */ | |
| VLAN_DEV_INFO(new_dev)->real_dev = real_dev; | |
| VLAN_DEV_INFO(new_dev)->dent = NULL; | |
| VLAN_DEV_INFO(new_dev)->flags = 1; | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "About to go find the group for idx: %i\n", | |
| real_dev->ifindex); | |
| #endif | |
| if (register_netdevice(new_dev)) | |
| goto out_free_newdev; | |
| /* So, got the sucker initialized, now lets place | |
| * it into our local structure. | |
| */ | |
| grp = __vlan_find_group(real_dev->ifindex); | |
| /* Note, we are running under the RTNL semaphore | |
| * so it cannot "appear" on us. | |
| */ | |
| if (!grp) { /* need to add a new group */ | |
| grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL); | |
| if (!grp) | |
| goto out_free_unregister; | |
| /* printk(KERN_ALERT "VLAN REGISTER: Allocated new group.\n"); */ | |
| memset(grp, 0, sizeof(struct vlan_group)); | |
| grp->real_dev_ifindex = real_dev->ifindex; | |
| hlist_add_head_rcu(&grp->hlist, | |
| &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]); | |
| if (real_dev->features & NETIF_F_HW_VLAN_RX) | |
| real_dev->vlan_rx_register(real_dev, grp); | |
| } | |
| grp->vlan_devices[VLAN_ID] = new_dev; | |
| if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */ | |
| printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n", | |
| new_dev->name); | |
| if (real_dev->features & NETIF_F_HW_VLAN_FILTER) | |
| real_dev->vlan_rx_add_vid(real_dev, VLAN_ID); | |
| rtnl_unlock(); | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "Allocated new device successfully, returning.\n"); | |
| #endif | |
| return new_dev; | |
| out_free_unregister: | |
| unregister_netdev(new_dev); | |
| goto out_unlock; | |
| out_free_newdev: | |
| free_netdev(new_dev); | |
| out_unlock: | |
| rtnl_unlock(); | |
| out_put_dev: | |
| dev_put(real_dev); | |
| out_ret_null: | |
| return NULL; | |
| } | |
| static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) | |
| { | |
| struct net_device *dev = ptr; | |
| struct vlan_group *grp = __vlan_find_group(dev->ifindex); | |
| int i, flgs; | |
| struct net_device *vlandev; | |
| if (!grp) | |
| goto out; | |
| /* It is OK that we do not hold the group lock right now, | |
| * as we run under the RTNL lock. | |
| */ | |
| switch (event) { | |
| case NETDEV_CHANGE: | |
| /* Propagate real device state to vlan devices */ | |
| flgs = dev->state & VLAN_LINK_STATE_MASK; | |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | |
| vlandev = grp->vlan_devices[i]; | |
| if (!vlandev) | |
| continue; | |
| if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) { | |
| vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) | |
| | flgs; | |
| netdev_state_change(vlandev); | |
| } | |
| } | |
| break; | |
| case NETDEV_DOWN: | |
| /* Put all VLANs for this dev in the down state too. */ | |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | |
| vlandev = grp->vlan_devices[i]; | |
| if (!vlandev) | |
| continue; | |
| flgs = vlandev->flags; | |
| if (!(flgs & IFF_UP)) | |
| continue; | |
| dev_change_flags(vlandev, flgs & ~IFF_UP); | |
| } | |
| break; | |
| case NETDEV_UP: | |
| /* Put all VLANs for this dev in the up state too. */ | |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | |
| vlandev = grp->vlan_devices[i]; | |
| if (!vlandev) | |
| continue; | |
| flgs = vlandev->flags; | |
| if (flgs & IFF_UP) | |
| continue; | |
| dev_change_flags(vlandev, flgs | IFF_UP); | |
| } | |
| break; | |
| case NETDEV_UNREGISTER: | |
| /* Delete all VLANs for this dev. */ | |
| for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { | |
| int ret; | |
| vlandev = grp->vlan_devices[i]; | |
| if (!vlandev) | |
| continue; | |
| ret = unregister_vlan_dev(dev, | |
| VLAN_DEV_INFO(vlandev)->vlan_id); | |
| unregister_netdevice(vlandev); | |
| /* Group was destroyed? */ | |
| if (ret == 1) | |
| break; | |
| } | |
| break; | |
| }; | |
| out: | |
| return NOTIFY_DONE; | |
| } | |
| /* | |
| * VLAN IOCTL handler. | |
| * o execute requested action or pass command to the device driver | |
| * arg is really a struct vlan_ioctl_args __user *. | |
| */ | |
| static int vlan_ioctl_handler(void __user *arg) | |
| { | |
| int err = 0; | |
| unsigned short vid = 0; | |
| struct vlan_ioctl_args args; | |
| if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args))) | |
| return -EFAULT; | |
| /* Null terminate this sucker, just in case. */ | |
| args.device1[23] = 0; | |
| args.u.device2[23] = 0; | |
| #ifdef VLAN_DEBUG | |
| printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd); | |
| #endif | |
| switch (args.cmd) { | |
| case SET_VLAN_INGRESS_PRIORITY_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| err = vlan_dev_set_ingress_priority(args.device1, | |
| args.u.skb_priority, | |
| args.vlan_qos); | |
| break; | |
| case SET_VLAN_EGRESS_PRIORITY_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| err = vlan_dev_set_egress_priority(args.device1, | |
| args.u.skb_priority, | |
| args.vlan_qos); | |
| break; | |
| case SET_VLAN_FLAG_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| err = vlan_dev_set_vlan_flag(args.device1, | |
| args.u.flag, | |
| args.vlan_qos); | |
| break; | |
| case SET_VLAN_NAME_TYPE_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| if ((args.u.name_type >= 0) && | |
| (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) { | |
| vlan_name_type = args.u.name_type; | |
| err = 0; | |
| } else { | |
| err = -EINVAL; | |
| } | |
| break; | |
| case ADD_VLAN_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| /* we have been given the name of the Ethernet Device we want to | |
| * talk to: args.dev1 We also have the | |
| * VLAN ID: args.u.VID | |
| */ | |
| if (register_vlan_device(args.device1, args.u.VID)) { | |
| err = 0; | |
| } else { | |
| err = -EINVAL; | |
| } | |
| break; | |
| case DEL_VLAN_CMD: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| /* Here, the args.dev1 is the actual VLAN we want | |
| * to get rid of. | |
| */ | |
| err = unregister_vlan_device(args.device1); | |
| break; | |
| case GET_VLAN_INGRESS_PRIORITY_CMD: | |
| /* TODO: Implement | |
| err = vlan_dev_get_ingress_priority(args); | |
| if (copy_to_user((void*)arg, &args, | |
| sizeof(struct vlan_ioctl_args))) { | |
| err = -EFAULT; | |
| } | |
| */ | |
| err = -EINVAL; | |
| break; | |
| case GET_VLAN_EGRESS_PRIORITY_CMD: | |
| /* TODO: Implement | |
| err = vlan_dev_get_egress_priority(args.device1, &(args.args); | |
| if (copy_to_user((void*)arg, &args, | |
| sizeof(struct vlan_ioctl_args))) { | |
| err = -EFAULT; | |
| } | |
| */ | |
| err = -EINVAL; | |
| break; | |
| case GET_VLAN_REALDEV_NAME_CMD: | |
| err = vlan_dev_get_realdev_name(args.device1, args.u.device2); | |
| if (copy_to_user(arg, &args, | |
| sizeof(struct vlan_ioctl_args))) { | |
| err = -EFAULT; | |
| } | |
| break; | |
| case GET_VLAN_VID_CMD: | |
| err = vlan_dev_get_vid(args.device1, &vid); | |
| args.u.VID = vid; | |
| if (copy_to_user(arg, &args, | |
| sizeof(struct vlan_ioctl_args))) { | |
| err = -EFAULT; | |
| } | |
| break; | |
| default: | |
| /* pass on to underlying device instead?? */ | |
| printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n", | |
| __FUNCTION__, args.cmd); | |
| return -EINVAL; | |
| }; | |
| return err; | |
| } | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(DRV_VERSION); |