| # | |
| # Video configuration | |
| # | |
| menu "Console display driver support" | |
| config VGA_CONSOLE | |
| bool "VGA text console" if EMBEDDED || !X86 | |
| depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC | |
| default y | |
| help | |
| Saying Y here will allow you to use Linux in text mode through a | |
| display that complies with the generic VGA standard. Virtually | |
| everyone wants that. | |
| The program SVGATextMode can be used to utilize SVGA video cards to | |
| their full potential in text mode. Download it from | |
| <ftp://ibiblio.org/pub/Linux/utils/console/>. | |
| Say Y. | |
| # if [ "$CONFIG_PCI" = "y" -a "$CONFIG_VGA_CONSOLE" = "y" ]; then | |
| # bool ' Allow VGA on any bus?' CONFIG_VGA_HOSE | |
| # if [ "$CONFIG_VGA_HOSE" = "y" ]; then | |
| # define_bool CONFIG_DUMMY_CONSOLE y | |
| # fi | |
| # fi | |
| config VIDEO_SELECT | |
| bool "Video mode selection support" | |
| depends on (X86 || X86_64) && VGA_CONSOLE | |
| ---help--- | |
| This enables support for text mode selection on kernel startup. If | |
| you want to take advantage of some high-resolution text mode your | |
| card's BIOS offers, but the traditional Linux utilities like | |
| SVGATextMode don't, you can say Y here and set the mode using the | |
| "vga=" option from your boot loader (lilo or loadlin) or set | |
| "vga=ask" which brings up a video mode menu on kernel startup. (Try | |
| "man bootparam" or see the documentation of your boot loader about | |
| how to pass options to the kernel.) | |
| Read the file <file:Documentation/svga.txt> for more information | |
| about the Video mode selection support. If unsure, say N. | |
| config MDA_CONSOLE | |
| depends on !M68K && ISA | |
| tristate "MDA text console (dual-headed) (EXPERIMENTAL)" | |
| ---help--- | |
| Say Y here if you have an old MDA or monochrome Hercules graphics | |
| adapter in your system acting as a second head ( = video card). You | |
| will then be able to use two monitors with your Linux system. Do not | |
| say Y here if your MDA card is the primary card in your system; the | |
| normal VGA driver will handle it. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mdacon. | |
| If unsure, say N. | |
| config SGI_NEWPORT_CONSOLE | |
| tristate "SGI Newport Console support" | |
| depends on SGI_IP22 | |
| help | |
| Say Y here if you want the console on the Newport aka XL graphics | |
| card of your Indy. Most people say Y here. | |
| # bool 'IODC console' CONFIG_IODC_CONSOLE | |
| config STI_CONSOLE | |
| tristate "STI text console" | |
| depends on PARISC && FRAMEBUFFER_CONSOLE | |
| default y | |
| help | |
| The STI console is the builtin display/keyboard on HP-PARISC | |
| machines. Say Y here to build support for it into your kernel. | |
| The alternative is to use your primary serial port as a console. | |
| config DUMMY_CONSOLE_COLUMNS | |
| int "Initial number of console screen columns" if STI_CONSOLE | |
| depends on PARISC | |
| default "160" | |
| help | |
| The default value is 160, which should fit a 1280x1024 monitor. | |
| Select 80 if you use a 640x480 resolution by default. | |
| config DUMMY_CONSOLE_ROWS | |
| int "Initial number of console screen rows" if STI_CONSOLE | |
| depends on PARISC | |
| default "64" | |
| help | |
| The default value is 64, which should fit a 1280x1024 monitor. | |
| Select 25 if you use a 640x480 resolution by default. | |
| config PROM_CONSOLE | |
| bool "PROM console" | |
| depends on SPARC32 || SPARC64 | |
| help | |
| Say Y to build a console driver for Sun machines that uses the | |
| terminal emulation built into their console PROMS. | |
| config DUMMY_CONSOLE | |
| bool | |
| depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y | |
| default y | |
| config FRAMEBUFFER_CONSOLE | |
| tristate "Framebuffer Console support" | |
| depends on FB | |
| select CRC32 | |
| config FONTS | |
| bool "Select compiled-in fonts" | |
| depends on FRAMEBUFFER_CONSOLE | |
| help | |
| Say Y here if you would like to use fonts other than the default | |
| your frame buffer console usually use. | |
| Note that the answer to this question won't directly affect the | |
| kernel: saying N will just cause the configurator to skip all | |
| the questions about foreign fonts. | |
| If unsure, say N (the default choices are safe). | |
| config FONT_8x8 | |
| bool "VGA 8x8 font" if FONTS | |
| depends on FRAMEBUFFER_CONSOLE | |
| default y if !SPARC32 && !SPARC64 && !FONTS | |
| help | |
| This is the "high resolution" font for the VGA frame buffer (the one | |
| provided by the text console 80x50 (and higher) modes). | |
| Note that this is a poor quality font. The VGA 8x16 font is quite a | |
| lot more readable. | |
| Given the resolution provided by the frame buffer device, answer N | |
| here is safe. | |
| config FONT_8x16 | |
| bool "VGA 8x16 font" if FONTS | |
| depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y | |
| default y if !SPARC32 && !SPARC64 && !FONTS | |
| help | |
| This is the "high resolution" font for the VGA frame buffer (the one | |
| provided by the VGA text console 80x25 mode. | |
| If unsure, say Y. | |
| config FONT_6x11 | |
| bool "Mac console 6x11 font (not supported by all drivers)" if FONTS | |
| depends on FRAMEBUFFER_CONSOLE | |
| default y if !SPARC32 && !SPARC64 && !FONTS && MAC | |
| help | |
| Small console font with Macintosh-style high-half glyphs. Some Mac | |
| framebuffer drivers don't support this one at all. | |
| config FONT_PEARL_8x8 | |
| bool "Pearl (old m68k) console 8x8 font" if FONTS | |
| depends on FRAMEBUFFER_CONSOLE | |
| default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA | |
| help | |
| Small console font with PC-style control-character and high-half | |
| glyphs. | |
| config FONT_ACORN_8x8 | |
| bool "Acorn console 8x8 font" if FONTS | |
| depends on FRAMEBUFFER_CONSOLE | |
| default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN | |
| help | |
| Small console font with PC-style control characters and high-half | |
| glyphs. | |
| config FONT_MINI_4x6 | |
| bool "Mini 4x6 font" | |
| depends on !SPARC32 && !SPARC64 && FONTS | |
| config FONT_SUN8x16 | |
| bool "Sparc console 8x16 font" | |
| depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) | |
| help | |
| This is the high resolution console font for Sun machines. Say Y. | |
| config FONT_SUN12x22 | |
| bool "Sparc console 12x22 font (not supported by all drivers)" | |
| depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) | |
| help | |
| This is the high resolution console font for Sun machines with very | |
| big letters (like the letters used in the SPARC PROM). If the | |
| standard font is unreadable for you, say Y, otherwise say N. | |
| endmenu | |