| /*====================================================================== | |
| Device driver for the PCMCIA control functionality of PXA2xx | |
| microprocessors. | |
| The contents of this file may be used under the | |
| terms of the GNU Public License version 2 (the "GPL") | |
| (c) Ian Molton (spyro@f2s.com) 2003 | |
| (c) Stefan Eletzhofer (stefan.eletzhofer@inquant.de) 2003,4 | |
| derived from sa11xx_base.c | |
| Portions created by John G. Dorsey are | |
| Copyright (C) 1999 John G. Dorsey. | |
| ======================================================================*/ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/config.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/ioport.h> | |
| #include <linux/kernel.h> | |
| #include <linux/spinlock.h> | |
| #include <asm/hardware.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/system.h> | |
| #include <asm/arch/pxa-regs.h> | |
| #include <pcmcia/cs_types.h> | |
| #include <pcmcia/ss.h> | |
| #include <pcmcia/bulkmem.h> | |
| #include <pcmcia/cistpl.h> | |
| #include "cs_internal.h" | |
| #include "soc_common.h" | |
| #include "pxa2xx_base.h" | |
| #define MCXX_SETUP_MASK (0x7f) | |
| #define MCXX_ASST_MASK (0x1f) | |
| #define MCXX_HOLD_MASK (0x3f) | |
| #define MCXX_SETUP_SHIFT (0) | |
| #define MCXX_ASST_SHIFT (7) | |
| #define MCXX_HOLD_SHIFT (14) | |
| static inline u_int pxa2xx_mcxx_hold(u_int pcmcia_cycle_ns, | |
| u_int mem_clk_10khz) | |
| { | |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; | |
| return (code / 300000) + ((code % 300000) ? 1 : 0) - 1; | |
| } | |
| static inline u_int pxa2xx_mcxx_asst(u_int pcmcia_cycle_ns, | |
| u_int mem_clk_10khz) | |
| { | |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; | |
| return (code / 300000) + ((code % 300000) ? 1 : 0) - 1; | |
| } | |
| static inline u_int pxa2xx_mcxx_setup(u_int pcmcia_cycle_ns, | |
| u_int mem_clk_10khz) | |
| { | |
| u_int code = pcmcia_cycle_ns * mem_clk_10khz; | |
| return (code / 100000) + ((code % 100000) ? 1 : 0) - 1; | |
| } | |
| /* This function returns the (approximate) command assertion period, in | |
| * nanoseconds, for a given CPU clock frequency and MCXX_ASST value: | |
| */ | |
| static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz, | |
| u_int pcmcia_mcxx_asst) | |
| { | |
| return (300000 * (pcmcia_mcxx_asst + 1) / mem_clk_10khz); | |
| } | |
| static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock ) | |
| { | |
| MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock) | |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) | |
| | ((pxa2xx_mcxx_asst(speed, clock) | |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) | |
| | ((pxa2xx_mcxx_hold(speed, clock) | |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); | |
| return 0; | |
| } | |
| static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock ) | |
| { | |
| MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock) | |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) | |
| | ((pxa2xx_mcxx_asst(speed, clock) | |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) | |
| | ((pxa2xx_mcxx_hold(speed, clock) | |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); | |
| return 0; | |
| } | |
| static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock ) | |
| { | |
| MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock) | |
| & MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT) | |
| | ((pxa2xx_mcxx_asst(speed, clock) | |
| & MCXX_ASST_MASK) << MCXX_ASST_SHIFT) | |
| | ((pxa2xx_mcxx_hold(speed, clock) | |
| & MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT); | |
| return 0; | |
| } | |
| static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int clk) | |
| { | |
| struct soc_pcmcia_timing timing; | |
| int sock = skt->nr; | |
| soc_common_pcmcia_get_timing(skt, &timing); | |
| pxa2xx_pcmcia_set_mcmem(sock, timing.mem, clk); | |
| pxa2xx_pcmcia_set_mcatt(sock, timing.attr, clk); | |
| pxa2xx_pcmcia_set_mcio(sock, timing.io, clk); | |
| return 0; | |
| } | |
| static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt) | |
| { | |
| unsigned int clk = get_memclk_frequency_10khz(); | |
| return pxa2xx_pcmcia_set_mcxx(skt, clk); | |
| } | |
| #ifdef CONFIG_CPU_FREQ | |
| static int | |
| pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, | |
| unsigned long val, | |
| struct cpufreq_freqs *freqs) | |
| { | |
| #warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock" | |
| switch (val) { | |
| case CPUFREQ_PRECHANGE: | |
| if (freqs->new > freqs->old) { | |
| debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, " | |
| "pre-updating\n", | |
| freqs->new / 1000, (freqs->new / 100) % 10, | |
| freqs->old / 1000, (freqs->old / 100) % 10); | |
| pxa2xx_pcmcia_set_mcxx(skt, freqs->new); | |
| } | |
| break; | |
| case CPUFREQ_POSTCHANGE: | |
| if (freqs->new < freqs->old) { | |
| debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, " | |
| "post-updating\n", | |
| freqs->new / 1000, (freqs->new / 100) % 10, | |
| freqs->old / 1000, (freqs->old / 100) % 10); | |
| pxa2xx_pcmcia_set_mcxx(skt, freqs->new); | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| int pxa2xx_drv_pcmcia_probe(struct device *dev) | |
| { | |
| int ret; | |
| struct pcmcia_low_level *ops; | |
| int first, nr; | |
| if (!dev || !dev->platform_data) | |
| return -ENODEV; | |
| ops = (struct pcmcia_low_level *)dev->platform_data; | |
| first = ops->first; | |
| nr = ops->nr; | |
| /* Provide our PXA2xx specific timing routines. */ | |
| ops->set_timing = pxa2xx_pcmcia_set_timing; | |
| #ifdef CONFIG_CPU_FREQ | |
| ops->frequency_change = pxa2xx_pcmcia_frequency_change; | |
| #endif | |
| ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr); | |
| if (ret == 0) { | |
| /* | |
| * We have at least one socket, so set MECR:CIT | |
| * (Card Is There) | |
| */ | |
| MECR |= MECR_CIT; | |
| /* Set MECR:NOS (Number Of Sockets) */ | |
| if (nr > 1) | |
| MECR |= MECR_NOS; | |
| else | |
| MECR &= ~MECR_NOS; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe); | |
| static int pxa2xx_drv_pcmcia_suspend(struct device *dev, u32 state, u32 level) | |
| { | |
| int ret = 0; | |
| if (level == SUSPEND_SAVE_STATE) | |
| ret = pcmcia_socket_dev_suspend(dev, state); | |
| return ret; | |
| } | |
| static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level) | |
| { | |
| int ret = 0; | |
| if (level == RESUME_RESTORE_STATE) | |
| { | |
| struct pcmcia_low_level *ops = dev->platform_data; | |
| int nr = ops ? ops->nr : 0; | |
| MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); | |
| ret = pcmcia_socket_dev_resume(dev); | |
| } | |
| return ret; | |
| } | |
| static struct device_driver pxa2xx_pcmcia_driver = { | |
| .probe = pxa2xx_drv_pcmcia_probe, | |
| .remove = soc_common_drv_pcmcia_remove, | |
| .suspend = pxa2xx_drv_pcmcia_suspend, | |
| .resume = pxa2xx_drv_pcmcia_resume, | |
| .name = "pxa2xx-pcmcia", | |
| .bus = &platform_bus_type, | |
| }; | |
| static int __init pxa2xx_pcmcia_init(void) | |
| { | |
| return driver_register(&pxa2xx_pcmcia_driver); | |
| } | |
| static void __exit pxa2xx_pcmcia_exit(void) | |
| { | |
| driver_unregister(&pxa2xx_pcmcia_driver); | |
| } | |
| module_init(pxa2xx_pcmcia_init); | |
| module_exit(pxa2xx_pcmcia_exit); | |
| MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>"); | |
| MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver"); | |
| MODULE_LICENSE("GPL"); |