| /* |
| * $Id: tuner.c,v 1.36 2005/01/14 13:29:40 kraxel Exp $ |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/i2c.h> |
| #include <linux/types.h> |
| #include <linux/videodev.h> |
| #include <linux/init.h> |
| |
| #include <media/tuner.h> |
| #include <media/audiochip.h> |
| |
| #define UNSET (-1U) |
| |
| /* standard i2c insmod options */ |
| static unsigned short normal_i2c[] = {I2C_CLIENT_END}; |
| static unsigned short normal_i2c_range[] = {0x60,0x6f,I2C_CLIENT_END}; |
| I2C_CLIENT_INSMOD; |
| |
| /* insmod options used at init time => read/only */ |
| static unsigned int type = UNSET; |
| static unsigned int addr = 0; |
| module_param(type, int, 0444); |
| module_param(addr, int, 0444); |
| |
| /* insmod options used at runtime => read/write */ |
| static unsigned int debug = 0; |
| static unsigned int tv_antenna = 1; |
| static unsigned int radio_antenna = 0; |
| static unsigned int optimize_vco = 1; |
| module_param(debug, int, 0644); |
| module_param(tv_antenna, int, 0644); |
| module_param(radio_antenna, int, 0644); |
| module_param(optimize_vco, int, 0644); |
| |
| static unsigned int tv_range[2] = { 44, 958 }; |
| static unsigned int radio_range[2] = { 65, 108 }; |
| |
| module_param_array(tv_range, int, NULL, 0644); |
| module_param_array(radio_range, int, NULL, 0644); |
| |
| MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); |
| MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); |
| MODULE_LICENSE("GPL"); |
| |
| static int this_adap; |
| #define dprintk if (debug) printk |
| |
| struct tuner { |
| unsigned int type; /* chip type */ |
| unsigned int freq; /* keep track of the current settings */ |
| v4l2_std_id std; |
| int using_v4l2; |
| |
| enum v4l2_tuner_type mode; |
| unsigned int input; |
| |
| // only for MT2032 |
| unsigned int xogc; |
| unsigned int radio_if2; |
| |
| void (*tv_freq)(struct i2c_client *c, unsigned int freq); |
| void (*radio_freq)(struct i2c_client *c, unsigned int freq); |
| }; |
| |
| static struct i2c_driver driver; |
| static struct i2c_client client_template; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| /* tv standard selection for Temic 4046 FM5 |
| this value takes the low bits of control byte 2 |
| from datasheet Rev.01, Feb.00 |
| standard BG I L L2 D |
| picture IF 38.9 38.9 38.9 33.95 38.9 |
| sound 1 33.4 32.9 32.4 40.45 32.4 |
| sound 2 33.16 |
| NICAM 33.05 32.348 33.05 33.05 |
| */ |
| #define TEMIC_SET_PAL_I 0x05 |
| #define TEMIC_SET_PAL_DK 0x09 |
| #define TEMIC_SET_PAL_L 0x0a // SECAM ? |
| #define TEMIC_SET_PAL_L2 0x0b // change IF ! |
| #define TEMIC_SET_PAL_BG 0x0c |
| |
| /* tv tuner system standard selection for Philips FQ1216ME |
| this value takes the low bits of control byte 2 |
| from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") |
| standard BG DK I L L` |
| picture carrier 38.90 38.90 38.90 38.90 33.95 |
| colour 34.47 34.47 34.47 34.47 38.38 |
| sound 1 33.40 32.40 32.90 32.40 40.45 |
| sound 2 33.16 - - - - |
| NICAM 33.05 33.05 32.35 33.05 39.80 |
| */ |
| #define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ |
| #define PHILIPS_SET_PAL_BGDK 0x09 |
| #define PHILIPS_SET_PAL_L2 0x0a |
| #define PHILIPS_SET_PAL_L 0x0b |
| |
| /* system switching for Philips FI1216MF MK2 |
| from datasheet "1996 Jul 09", |
| standard BG L L' |
| picture carrier 38.90 38.90 33.95 |
| colour 34.47 34.37 38.38 |
| sound 1 33.40 32.40 40.45 |
| sound 2 33.16 - - |
| NICAM 33.05 33.05 39.80 |
| */ |
| #define PHILIPS_MF_SET_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ |
| #define PHILIPS_MF_SET_PAL_L 0x03 // France |
| #define PHILIPS_MF_SET_PAL_L2 0x02 // L' |
| |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| struct tunertype |
| { |
| char *name; |
| unsigned char Vendor; |
| unsigned char Type; |
| |
| unsigned short thresh1; /* band switch VHF_LO <=> VHF_HI */ |
| unsigned short thresh2; /* band switch VHF_HI <=> UHF */ |
| unsigned char VHF_L; |
| unsigned char VHF_H; |
| unsigned char UHF; |
| unsigned char config; |
| unsigned short IFPCoff; /* 622.4=16*38.90 MHz PAL, |
| 732 =16*45.75 NTSCi, |
| 940 =16*58.75 NTSC-Japan |
| 704 =16*44 ATSC */ |
| }; |
| |
| /* |
| * The floats in the tuner struct are computed at compile time |
| * by gcc and cast back to integers. Thus we don't violate the |
| * "no float in kernel" rule. |
| */ |
| static struct tunertype tuners[] = { |
| { "Temic PAL (4002 FH5)", TEMIC, PAL, |
| 16*140.25,16*463.25,0x02,0x04,0x01,0x8e,623}, |
| { "Philips PAL_I (FI1246 and compatibles)", Philips, PAL_I, |
| 16*140.25,16*463.25,0xa0,0x90,0x30,0x8e,623}, |
| { "Philips NTSC (FI1236,FM1236 and compatibles)", Philips, NTSC, |
| 16*157.25,16*451.25,0xA0,0x90,0x30,0x8e,732}, |
| { "Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)", Philips, SECAM, |
| 16*168.25,16*447.25,0xA7,0x97,0x37,0x8e,623}, |
| |
| { "NoTuner", NoTuner, NOTUNER, |
| 0,0,0x00,0x00,0x00,0x00,0x00}, |
| { "Philips PAL_BG (FI1216 and compatibles)", Philips, PAL, |
| 16*168.25,16*447.25,0xA0,0x90,0x30,0x8e,623}, |
| { "Temic NTSC (4032 FY5)", TEMIC, NTSC, |
| 16*157.25,16*463.25,0x02,0x04,0x01,0x8e,732}, |
| { "Temic PAL_I (4062 FY5)", TEMIC, PAL_I, |
| 16*170.00,16*450.00,0x02,0x04,0x01,0x8e,623}, |
| |
| { "Temic NTSC (4036 FY5)", TEMIC, NTSC, |
| 16*157.25,16*463.25,0xa0,0x90,0x30,0x8e,732}, |
| { "Alps HSBH1", TEMIC, NTSC, |
| 16*137.25,16*385.25,0x01,0x02,0x08,0x8e,732}, |
| { "Alps TSBE1",TEMIC,PAL, |
| 16*137.25,16*385.25,0x01,0x02,0x08,0x8e,732}, |
| { "Alps TSBB5", Alps, PAL_I, /* tested (UK UHF) with Modulartech MM205 */ |
| 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,632}, |
| |
| { "Alps TSBE5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ |
| 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,622}, |
| { "Alps TSBC5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ |
| 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,608}, |
| { "Temic PAL_BG (4006FH5)", TEMIC, PAL, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "Alps TSCH6",Alps,NTSC, |
| 16*137.25,16*385.25,0x14,0x12,0x11,0x8e,732}, |
| |
| { "Temic PAL_DK (4016 FY5)",TEMIC,PAL, |
| 16*168.25,16*456.25,0xa0,0x90,0x30,0x8e,623}, |
| { "Philips NTSC_M (MK2)",Philips,NTSC, |
| 16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732}, |
| { "Temic PAL_I (4066 FY5)", TEMIC, PAL_I, |
| 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, |
| { "Temic PAL* auto (4006 FN5)", TEMIC, PAL, |
| 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, |
| |
| { "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)", TEMIC, PAL, |
| 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, |
| { "Temic NTSC (4039 FR5)", TEMIC, NTSC, |
| 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, |
| { "Temic PAL/SECAM multi (4046 FM5)", TEMIC, PAL, |
| 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, |
| { "Philips PAL_DK (FI1256 and compatibles)", Philips, PAL, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| |
| { "Philips PAL/SECAM multi (FQ1216ME)", Philips, PAL, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "LG PAL_I+FM (TAPC-I001D)", LGINNOTEK, PAL_I, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "LG PAL_I (TAPC-I701D)", LGINNOTEK, PAL_I, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "LG NTSC+FM (TPI8NSR01F)", LGINNOTEK, NTSC, |
| 16*210.00,16*497.00,0xa0,0x90,0x30,0x8e,732}, |
| |
| { "LG PAL_BG+FM (TPI8PSB01D)", LGINNOTEK, PAL, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "LG PAL_BG (TPI8PSB11D)", LGINNOTEK, PAL, |
| 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, |
| { "Temic PAL* auto + FM (4009 FN5)", TEMIC, PAL, |
| 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, |
| { "SHARP NTSC_JP (2U5JF5540)", SHARP, NTSC, /* 940=16*58.75 NTSC@Japan */ |
| 16*137.25,16*317.25,0x01,0x02,0x08,0x8e,940 }, |
| |
| { "Samsung PAL TCPM9091PD27", Samsung, PAL, /* from sourceforge v3tv */ |
| 16*169,16*464,0xA0,0x90,0x30,0x8e,623}, |
| { "MT20xx universal", Microtune,PAL|NTSC, |
| 0,0,0,0,0,0,0}, |
| { "Temic PAL_BG (4106 FH5)", TEMIC, PAL, |
| 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, |
| { "Temic PAL_DK/SECAM_L (4012 FY5)", TEMIC, PAL, |
| 16*140.25, 16*463.25, 0x02,0x04,0x01,0x8e,623}, |
| |
| { "Temic NTSC (4136 FY5)", TEMIC, NTSC, |
| 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, |
| { "LG PAL (newer TAPC series)", LGINNOTEK, PAL, |
| 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,623}, |
| { "Philips PAL/SECAM multi (FM1216ME MK3)", Philips, PAL, |
| 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,623 }, |
| { "LG NTSC (newer TAPC series)", LGINNOTEK, NTSC, |
| 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,732}, |
| |
| { "HITACHI V7-J180AT", HITACHI, NTSC, |
| 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,940 }, |
| { "Philips PAL_MK (FI1216 MK)", Philips, PAL, |
| 16*140.25,16*463.25,0x01,0xc2,0xcf,0x8e,623}, |
| { "Philips 1236D ATSC/NTSC daul in",Philips,ATSC, |
| 16*157.25,16*454.00,0xa0,0x90,0x30,0x8e,732}, |
| { "Philips NTSC MK3 (FM1236MK3 or FM1236/F)", Philips, NTSC, |
| 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, |
| |
| { "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)", Philips, NTSC, |
| 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, |
| { "Microtune 4049 FM5",Microtune,PAL, |
| 16*141.00,16*464.00,0xa0,0x90,0x30,0x8e,623}, |
| { "Panasonic VP27s/ENGE4324D", Panasonic, NTSC, |
| 16*160.00,16*454.00,0x01,0x02,0x08,0xce,940}, |
| { "LG NTSC (TAPE series)", LGINNOTEK, NTSC, |
| 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 }, |
| |
| { "Tenna TNF 8831 BGFF)", Philips, PAL, |
| 16*161.25,16*463.25,0xa0,0x90,0x30,0x8e,623}, |
| { "Microtune 4042 FI5 ATSC/NTSC dual in", Microtune, NTSC, |
| 16*162.00,16*457.00,0xa2,0x94,0x31,0x8e,732}, |
| { "TCL 2002N", TCL, NTSC, |
| 16*172.00,16*448.00,0x01,0x02,0x08,0x8e,732}, |
| { "Philips PAL/SECAM_D (FM 1256 I-H3)", Philips, PAL, |
| 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,623 }, |
| |
| { "Thomson DDT 7610 ATSC/NTSC)", THOMSON, ATSC, |
| 16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732}, |
| { "Philips FQ1286", Philips, NTSC, |
| 16*160.00,16*454.00,0x41,0x42,0x04,0x8e,940}, // UHF band untested |
| |
| }; |
| #define TUNERS ARRAY_SIZE(tuners) |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int tuner_getstatus(struct i2c_client *c) |
| { |
| unsigned char byte; |
| |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| if (t->type == TUNER_MT2032) |
| return 0; |
| |
| if (1 != i2c_master_recv(c,&byte,1)) |
| return 0; |
| return byte; |
| } |
| |
| #define TUNER_POR 0x80 |
| #define TUNER_FL 0x40 |
| #define TUNER_MODE 0x38 |
| #define TUNER_AFC 0x07 |
| |
| #define TUNER_STEREO 0x10 /* radio mode */ |
| #define TUNER_SIGNAL 0x07 /* radio mode */ |
| |
| static int tuner_signal(struct i2c_client *c) |
| { |
| return (tuner_getstatus(c) & TUNER_SIGNAL)<<13; |
| } |
| |
| static int tuner_stereo(struct i2c_client *c) |
| { |
| return (tuner_getstatus (c) & TUNER_STEREO); |
| } |
| |
| #if 0 /* unused */ |
| static int tuner_islocked (struct i2c_client *c) |
| { |
| return (tuner_getstatus (c) & TUNER_FL); |
| } |
| |
| static int tuner_afcstatus (struct i2c_client *c) |
| { |
| return (tuner_getstatus (c) & TUNER_AFC) - 2; |
| } |
| |
| static int tuner_mode (struct i2c_client *c) |
| { |
| return (tuner_getstatus (c) & TUNER_MODE) >> 3; |
| } |
| #endif |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| #define MT2032 0x04 |
| #define MT2030 0x06 |
| #define MT2040 0x07 |
| #define MT2050 0x42 |
| |
| static char *microtune_part[] = { |
| [ MT2030 ] = "MT2030", |
| [ MT2032 ] = "MT2032", |
| [ MT2040 ] = "MT2040", |
| [ MT2050 ] = "MT2050", |
| }; |
| |
| // IsSpurInBand()? |
| static int mt2032_spurcheck(int f1, int f2, int spectrum_from,int spectrum_to) |
| { |
| int n1=1,n2,f; |
| |
| f1=f1/1000; //scale to kHz to avoid 32bit overflows |
| f2=f2/1000; |
| spectrum_from/=1000; |
| spectrum_to/=1000; |
| |
| dprintk("spurcheck f1=%d f2=%d from=%d to=%d\n",f1,f2,spectrum_from,spectrum_to); |
| |
| do { |
| n2=-n1; |
| f=n1*(f1-f2); |
| do { |
| n2--; |
| f=f-f2; |
| dprintk(" spurtest n1=%d n2=%d ftest=%d\n",n1,n2,f); |
| |
| if( (f>spectrum_from) && (f<spectrum_to)) |
| printk("mt2032 spurcheck triggered: %d\n",n1); |
| } while ( (f>(f2-spectrum_to)) || (n2>-5)); |
| n1++; |
| } while (n1<5); |
| |
| return 1; |
| } |
| |
| static int mt2032_compute_freq(unsigned int rfin, |
| unsigned int if1, unsigned int if2, |
| unsigned int spectrum_from, |
| unsigned int spectrum_to, |
| unsigned char *buf, |
| int *ret_sel, |
| unsigned int xogc) //all in Hz |
| { |
| unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1, |
| desired_lo2,lo2,lo2n,lo2a,lo2num,lo2freq; |
| |
| fref= 5250 *1000; //5.25MHz |
| desired_lo1=rfin+if1; |
| |
| lo1=(2*(desired_lo1/1000)+(fref/1000)) / (2*fref/1000); |
| lo1n=lo1/8; |
| lo1a=lo1-(lo1n*8); |
| |
| s=rfin/1000/1000+1090; |
| |
| if(optimize_vco) { |
| if(s>1890) sel=0; |
| else if(s>1720) sel=1; |
| else if(s>1530) sel=2; |
| else if(s>1370) sel=3; |
| else sel=4; // >1090 |
| } |
| else { |
| if(s>1790) sel=0; // <1958 |
| else if(s>1617) sel=1; |
| else if(s>1449) sel=2; |
| else if(s>1291) sel=3; |
| else sel=4; // >1090 |
| } |
| *ret_sel=sel; |
| |
| lo1freq=(lo1a+8*lo1n)*fref; |
| |
| dprintk("mt2032: rfin=%d lo1=%d lo1n=%d lo1a=%d sel=%d, lo1freq=%d\n", |
| rfin,lo1,lo1n,lo1a,sel,lo1freq); |
| |
| desired_lo2=lo1freq-rfin-if2; |
| lo2=(desired_lo2)/fref; |
| lo2n=lo2/8; |
| lo2a=lo2-(lo2n*8); |
| lo2num=((desired_lo2/1000)%(fref/1000))* 3780/(fref/1000); //scale to fit in 32bit arith |
| lo2freq=(lo2a+8*lo2n)*fref + lo2num*(fref/1000)/3780*1000; |
| |
| dprintk("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n", |
| rfin,lo2,lo2n,lo2a,lo2num,lo2freq); |
| |
| if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) { |
| printk("mt2032: frequency parameters out of range: %d %d %d %d\n", |
| lo1a, lo1n, lo2a,lo2n); |
| return(-1); |
| } |
| |
| mt2032_spurcheck(lo1freq, desired_lo2, spectrum_from, spectrum_to); |
| // should recalculate lo1 (one step up/down) |
| |
| // set up MT2032 register map for transfer over i2c |
| buf[0]=lo1n-1; |
| buf[1]=lo1a | (sel<<4); |
| buf[2]=0x86; // LOGC |
| buf[3]=0x0f; //reserved |
| buf[4]=0x1f; |
| buf[5]=(lo2n-1) | (lo2a<<5); |
| if(rfin >400*1000*1000) |
| buf[6]=0xe4; |
| else |
| buf[6]=0xf4; // set PKEN per rev 1.2 |
| buf[7]=8+xogc; |
| buf[8]=0xc3; //reserved |
| buf[9]=0x4e; //reserved |
| buf[10]=0xec; //reserved |
| buf[11]=(lo2num&0xff); |
| buf[12]=(lo2num>>8) |0x80; // Lo2RST |
| |
| return 0; |
| } |
| |
| static int mt2032_check_lo_lock(struct i2c_client *c) |
| { |
| int try,lock=0; |
| unsigned char buf[2]; |
| for(try=0;try<10;try++) { |
| buf[0]=0x0e; |
| i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,1); |
| dprintk("mt2032 Reg.E=0x%02x\n",buf[0]); |
| lock=buf[0] &0x06; |
| |
| if (lock==6) |
| break; |
| |
| dprintk("mt2032: pll wait 1ms for lock (0x%2x)\n",buf[0]); |
| udelay(1000); |
| } |
| return lock; |
| } |
| |
| static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock) |
| { |
| unsigned char buf[2]; |
| int tad1; |
| |
| buf[0]=0x0f; |
| i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,1); |
| dprintk("mt2032 Reg.F=0x%02x\n",buf[0]); |
| tad1=buf[0]&0x07; |
| |
| if(tad1 ==0) return lock; |
| if(tad1 ==1) return lock; |
| |
| if(tad1==2) { |
| if(sel==0) |
| return lock; |
| else sel--; |
| } |
| else { |
| if(sel<4) |
| sel++; |
| else |
| return lock; |
| } |
| |
| dprintk("mt2032 optimize_vco: sel=%d\n",sel); |
| |
| buf[0]=0x0f; |
| buf[1]=sel; |
| i2c_master_send(c,buf,2); |
| lock=mt2032_check_lo_lock(c); |
| return lock; |
| } |
| |
| |
| static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin, |
| unsigned int if1, unsigned int if2, |
| unsigned int from, unsigned int to) |
| { |
| unsigned char buf[21]; |
| int lint_try,ret,sel,lock=0; |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| dprintk("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n",rfin,if1,if2,from,to); |
| |
| buf[0]=0; |
| ret=i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,21); |
| |
| buf[0]=0; |
| ret=mt2032_compute_freq(rfin,if1,if2,from,to,&buf[1],&sel,t->xogc); |
| if (ret<0) |
| return; |
| |
| // send only the relevant registers per Rev. 1.2 |
| buf[0]=0; |
| ret=i2c_master_send(c,buf,4); |
| buf[5]=5; |
| ret=i2c_master_send(c,buf+5,4); |
| buf[11]=11; |
| ret=i2c_master_send(c,buf+11,3); |
| if(ret!=3) |
| printk("mt2032_set_if_freq failed with %d\n",ret); |
| |
| // wait for PLLs to lock (per manual), retry LINT if not. |
| for(lint_try=0; lint_try<2; lint_try++) { |
| lock=mt2032_check_lo_lock(c); |
| |
| if(optimize_vco) |
| lock=mt2032_optimize_vco(c,sel,lock); |
| if(lock==6) break; |
| |
| printk("mt2032: re-init PLLs by LINT\n"); |
| buf[0]=7; |
| buf[1]=0x80 +8+t->xogc; // set LINT to re-init PLLs |
| i2c_master_send(c,buf,2); |
| mdelay(10); |
| buf[1]=8+t->xogc; |
| i2c_master_send(c,buf,2); |
| } |
| |
| if (lock!=6) |
| printk("MT2032 Fatal Error: PLLs didn't lock.\n"); |
| |
| buf[0]=2; |
| buf[1]=0x20; // LOGC for optimal phase noise |
| ret=i2c_master_send(c,buf,2); |
| if (ret!=2) |
| printk("mt2032_set_if_freq2 failed with %d\n",ret); |
| } |
| |
| |
| static void mt2032_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| int if2,from,to; |
| |
| // signal bandwidth and picture carrier |
| if (t->std & V4L2_STD_525_60) { |
| // NTSC |
| from = 40750*1000; |
| to = 46750*1000; |
| if2 = 45750*1000; |
| } else { |
| // PAL |
| from = 32900*1000; |
| to = 39900*1000; |
| if2 = 38900*1000; |
| } |
| |
| mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, |
| 1090*1000*1000, if2, from, to); |
| } |
| |
| static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| int if2 = t->radio_if2; |
| |
| // per Manual for FM tuning: first if center freq. 1085 MHz |
| mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, |
| 1085*1000*1000,if2,if2,if2); |
| } |
| |
| // Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001 |
| static int mt2032_init(struct i2c_client *c) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| unsigned char buf[21]; |
| int ret,xogc,xok=0; |
| |
| // Initialize Registers per spec. |
| buf[1]=2; // Index to register 2 |
| buf[2]=0xff; |
| buf[3]=0x0f; |
| buf[4]=0x1f; |
| ret=i2c_master_send(c,buf+1,4); |
| |
| buf[5]=6; // Index register 6 |
| buf[6]=0xe4; |
| buf[7]=0x8f; |
| buf[8]=0xc3; |
| buf[9]=0x4e; |
| buf[10]=0xec; |
| ret=i2c_master_send(c,buf+5,6); |
| |
| buf[12]=13; // Index register 13 |
| buf[13]=0x32; |
| ret=i2c_master_send(c,buf+12,2); |
| |
| // Adjust XOGC (register 7), wait for XOK |
| xogc=7; |
| do { |
| dprintk("mt2032: xogc = 0x%02x\n",xogc&0x07); |
| mdelay(10); |
| buf[0]=0x0e; |
| i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,1); |
| xok=buf[0]&0x01; |
| dprintk("mt2032: xok = 0x%02x\n",xok); |
| if (xok == 1) break; |
| |
| xogc--; |
| dprintk("mt2032: xogc = 0x%02x\n",xogc&0x07); |
| if (xogc == 3) { |
| xogc=4; // min. 4 per spec |
| break; |
| } |
| buf[0]=0x07; |
| buf[1]=0x88 + xogc; |
| ret=i2c_master_send(c,buf,2); |
| if (ret!=2) |
| printk("mt2032_init failed with %d\n",ret); |
| } while (xok != 1 ); |
| t->xogc=xogc; |
| |
| t->tv_freq = mt2032_set_tv_freq; |
| t->radio_freq = mt2032_set_radio_freq; |
| return(1); |
| } |
| |
| static void mt2050_set_antenna(struct i2c_client *c, unsigned char antenna) |
| { |
| unsigned char buf[2]; |
| int ret; |
| |
| buf[0] = 6; |
| buf[1] = antenna ? 0x11 : 0x10; |
| ret=i2c_master_send(c,buf,2); |
| dprintk("mt2050: enabled antenna connector %d\n", antenna); |
| } |
| |
| static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned int if2) |
| { |
| unsigned int if1=1218*1000*1000; |
| unsigned int f_lo1,f_lo2,lo1,lo2,f_lo1_modulo,f_lo2_modulo,num1,num2,div1a,div1b,div2a,div2b; |
| int ret; |
| unsigned char buf[6]; |
| |
| dprintk("mt2050_set_if_freq freq=%d if1=%d if2=%d\n", |
| freq,if1,if2); |
| |
| f_lo1=freq+if1; |
| f_lo1=(f_lo1/1000000)*1000000; |
| |
| f_lo2=f_lo1-freq-if2; |
| f_lo2=(f_lo2/50000)*50000; |
| |
| lo1=f_lo1/4000000; |
| lo2=f_lo2/4000000; |
| |
| f_lo1_modulo= f_lo1-(lo1*4000000); |
| f_lo2_modulo= f_lo2-(lo2*4000000); |
| |
| num1=4*f_lo1_modulo/4000000; |
| num2=4096*(f_lo2_modulo/1000)/4000; |
| |
| // todo spurchecks |
| |
| div1a=(lo1/12)-1; |
| div1b=lo1-(div1a+1)*12; |
| |
| div2a=(lo2/8)-1; |
| div2b=lo2-(div2a+1)*8; |
| |
| if (debug > 1) { |
| printk("lo1 lo2 = %d %d\n", lo1, lo2); |
| printk("num1 num2 div1a div1b div2a div2b= %x %x %x %x %x %x\n",num1,num2,div1a,div1b,div2a,div2b); |
| } |
| |
| buf[0]=1; |
| buf[1]= 4*div1b + num1; |
| if(freq<275*1000*1000) buf[1] = buf[1]|0x80; |
| |
| buf[2]=div1a; |
| buf[3]=32*div2b + num2/256; |
| buf[4]=num2-(num2/256)*256; |
| buf[5]=div2a; |
| if(num2!=0) buf[5]=buf[5]|0x40; |
| |
| if (debug > 1) { |
| int i; |
| printk("bufs is: "); |
| for(i=0;i<6;i++) |
| printk("%x ",buf[i]); |
| printk("\n"); |
| } |
| |
| ret=i2c_master_send(c,buf,6); |
| if (ret!=6) |
| printk("mt2050_set_if_freq failed with %d\n",ret); |
| } |
| |
| static void mt2050_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| unsigned int if2; |
| |
| if (t->std & V4L2_STD_525_60) { |
| // NTSC |
| if2 = 45750*1000; |
| } else { |
| // PAL |
| if2 = 38900*1000; |
| } |
| if (V4L2_TUNER_DIGITAL_TV == t->mode) { |
| // testing for DVB ... |
| if2 = 36150*1000; |
| } |
| mt2050_set_if_freq(c, freq*62500, if2); |
| mt2050_set_antenna(c, tv_antenna); |
| } |
| |
| static void mt2050_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| int if2 = t->radio_if2; |
| |
| mt2050_set_if_freq(c, freq*62500, if2); |
| mt2050_set_antenna(c, radio_antenna); |
| } |
| |
| static int mt2050_init(struct i2c_client *c) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| unsigned char buf[2]; |
| int ret; |
| |
| buf[0]=6; |
| buf[1]=0x10; |
| ret=i2c_master_send(c,buf,2); // power |
| |
| buf[0]=0x0f; |
| buf[1]=0x0f; |
| ret=i2c_master_send(c,buf,2); // m1lo |
| |
| buf[0]=0x0d; |
| ret=i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,1); |
| |
| dprintk("mt2050: sro is %x\n",buf[0]); |
| t->tv_freq = mt2050_set_tv_freq; |
| t->radio_freq = mt2050_set_radio_freq; |
| return 0; |
| } |
| |
| static int microtune_init(struct i2c_client *c) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| char *name; |
| unsigned char buf[21]; |
| int company_code; |
| |
| memset(buf,0,sizeof(buf)); |
| t->tv_freq = NULL; |
| t->radio_freq = NULL; |
| name = "unknown"; |
| |
| i2c_master_send(c,buf,1); |
| i2c_master_recv(c,buf,21); |
| if(debug) { |
| int i; |
| printk(KERN_DEBUG "tuner: MT2032 hexdump:\n"); |
| for(i=0;i<21;i++) { |
| printk(" %02x",buf[i]); |
| if(((i+1)%8)==0) printk(" "); |
| if(((i+1)%16)==0) printk("\n "); |
| } |
| printk("\n "); |
| } |
| company_code = buf[0x11] << 8 | buf[0x12]; |
| printk("tuner: microtune: companycode=%04x part=%02x rev=%02x\n", |
| company_code,buf[0x13],buf[0x14]); |
| |
| #if 0 |
| /* seems to cause more problems than it solves ... */ |
| switch (company_code) { |
| case 0x30bf: |
| case 0x3cbf: |
| case 0x3dbf: |
| case 0x4d54: |
| case 0x8e81: |
| case 0x8e91: |
| /* ok (?) */ |
| break; |
| default: |
| printk("tuner: microtune: unknown companycode\n"); |
| return 0; |
| } |
| #endif |
| |
| if (buf[0x13] < ARRAY_SIZE(microtune_part) && |
| NULL != microtune_part[buf[0x13]]) |
| name = microtune_part[buf[0x13]]; |
| switch (buf[0x13]) { |
| case MT2032: |
| mt2032_init(c); |
| break; |
| case MT2050: |
| mt2050_init(c); |
| break; |
| default: |
| printk("tuner: microtune %s found, not (yet?) supported, sorry :-/\n", |
| name); |
| return 0; |
| } |
| printk("tuner: microtune %s found, OK\n",name); |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| u8 config; |
| u16 div; |
| struct tunertype *tun; |
| unsigned char buffer[4]; |
| int rc; |
| |
| tun = &tuners[t->type]; |
| if (freq < tun->thresh1) { |
| config = tun->VHF_L; |
| dprintk("tv: VHF lowrange\n"); |
| } else if (freq < tun->thresh2) { |
| config = tun->VHF_H; |
| dprintk("tv: VHF high range\n"); |
| } else { |
| config = tun->UHF; |
| dprintk("tv: UHF range\n"); |
| } |
| |
| |
| /* tv norm specific stuff for multi-norm tuners */ |
| switch (t->type) { |
| case TUNER_PHILIPS_SECAM: // FI1216MF |
| /* 0x01 -> ??? no change ??? */ |
| /* 0x02 -> PAL BDGHI / SECAM L */ |
| /* 0x04 -> ??? PAL others / SECAM others ??? */ |
| config &= ~0x02; |
| if (t->std & V4L2_STD_SECAM) |
| config |= 0x02; |
| break; |
| |
| case TUNER_TEMIC_4046FM5: |
| config &= ~0x0f; |
| |
| if (t->std & V4L2_STD_PAL_BG) { |
| config |= TEMIC_SET_PAL_BG; |
| |
| } else if (t->std & V4L2_STD_PAL_I) { |
| config |= TEMIC_SET_PAL_I; |
| |
| } else if (t->std & V4L2_STD_PAL_DK) { |
| config |= TEMIC_SET_PAL_DK; |
| |
| } else if (t->std & V4L2_STD_SECAM_L) { |
| config |= TEMIC_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_FQ1216ME: |
| config &= ~0x0f; |
| |
| if (t->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { |
| config |= PHILIPS_SET_PAL_BGDK; |
| |
| } else if (t->std & V4L2_STD_PAL_I) { |
| config |= PHILIPS_SET_PAL_I; |
| |
| } else if (t->std & V4L2_STD_SECAM_L) { |
| config |= PHILIPS_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_ATSC: |
| /* 0x00 -> ATSC antenna input 1 */ |
| /* 0x01 -> ATSC antenna input 2 */ |
| /* 0x02 -> NTSC antenna input 1 */ |
| /* 0x03 -> NTSC antenna input 2 */ |
| config &= ~0x03; |
| if (!(t->std & V4L2_STD_ATSC)) |
| config |= 2; |
| /* FIXME: input */ |
| break; |
| |
| case TUNER_MICROTUNE_4042FI5: |
| /* Set the charge pump for fast tuning */ |
| tun->config |= 0x40; |
| break; |
| } |
| |
| /* |
| * Philips FI1216MK2 remark from specification : |
| * for channel selection involving band switching, and to ensure |
| * smooth tuning to the desired channel without causing |
| * unnecessary charge pump action, it is recommended to consider |
| * the difference between wanted channel frequency and the |
| * current channel frequency. Unnecessary charge pump action |
| * will result in very low tuning voltage which may drive the |
| * oscillator to extreme conditions. |
| * |
| * Progfou: specification says to send config data before |
| * frequency in case (wanted frequency < current frequency). |
| */ |
| |
| div=freq + tun->IFPCoff; |
| if (t->type == TUNER_PHILIPS_SECAM && freq < t->freq) { |
| buffer[0] = tun->config; |
| buffer[1] = config; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = tun->config; |
| buffer[3] = config; |
| } |
| dprintk("tuner: tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| printk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc); |
| |
| if (t->type == TUNER_MICROTUNE_4042FI5) { |
| // FIXME - this may also work for other tuners |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| u8 status_byte = 0; |
| |
| /* Wait until the PLL locks */ |
| for (;;) { |
| if (time_after(jiffies,timeout)) |
| return; |
| if (1 != (rc = i2c_master_recv(c,&status_byte,1))) { |
| dprintk("tuner: i2c i/o read error: rc == %d (should be 1)\n",rc); |
| break; |
| } |
| /* bit 6 is PLL locked indicator */ |
| if (status_byte & 0x40) |
| break; |
| udelay(10); |
| } |
| |
| /* Set the charge pump for optimized phase noise figure */ |
| tun->config &= ~0x40; |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = tun->config; |
| buffer[3] = config; |
| dprintk("tuner: tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| dprintk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc); |
| } |
| } |
| |
| static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tunertype *tun; |
| struct tuner *t = i2c_get_clientdata(c); |
| unsigned char buffer[4]; |
| unsigned div; |
| int rc; |
| |
| tun=&tuners[t->type]; |
| div = freq + (int)(16*10.7); |
| buffer[2] = tun->config; |
| |
| switch (t->type) { |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| buffer[3] = 0x19; |
| break; |
| case TUNER_PHILIPS_FM1256_IH3: |
| div = (20 * freq)/16 + 333 * 2; |
| buffer[2] = 0x80; |
| buffer[3] = 0x19; |
| break; |
| case TUNER_LG_PAL_FM: |
| buffer[3] = 0xa5; |
| break; |
| default: |
| buffer[3] = 0xa4; |
| break; |
| } |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| |
| dprintk("tuner: radio 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| printk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc); |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| // Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz |
| static void set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| if (t->type == UNSET) { |
| printk("tuner: tuner type not set\n"); |
| return; |
| } |
| if (NULL == t->tv_freq) { |
| printk("tuner: Huh? tv_set is NULL?\n"); |
| return; |
| } |
| if (freq < tv_range[0]*16 || freq > tv_range[1]*16) { |
| /* FIXME: better do that chip-specific, but |
| right now we don't have that in the config |
| struct and this way is still better than no |
| check at all */ |
| printk("tuner: TV freq (%d.%02d) out of range (%d-%d)\n", |
| freq/16,freq%16*100/16,tv_range[0],tv_range[1]); |
| return; |
| } |
| t->tv_freq(c,freq); |
| } |
| |
| static void set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| if (t->type == UNSET) { |
| printk("tuner: tuner type not set\n"); |
| return; |
| } |
| if (NULL == t->radio_freq) { |
| printk("tuner: no radio tuning for this one, sorry.\n"); |
| return; |
| } |
| if (freq < radio_range[0]*16 || freq > radio_range[1]*16) { |
| printk("tuner: radio freq (%d.%02d) out of range (%d-%d)\n", |
| freq/16,freq%16*100/16, |
| radio_range[0],radio_range[1]); |
| return; |
| } |
| t->radio_freq(c,freq); |
| } |
| |
| static void set_freq(struct i2c_client *c, unsigned long freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| switch (t->mode) { |
| case V4L2_TUNER_RADIO: |
| dprintk("tuner: radio freq set to %lu.%02lu\n", |
| freq/16,freq%16*100/16); |
| set_radio_freq(c,freq); |
| break; |
| case V4L2_TUNER_ANALOG_TV: |
| case V4L2_TUNER_DIGITAL_TV: |
| dprintk("tuner: tv freq set to %lu.%02lu\n", |
| freq/16,freq%16*100/16); |
| set_tv_freq(c, freq); |
| break; |
| } |
| t->freq = freq; |
| } |
| |
| static void set_type(struct i2c_client *c, unsigned int type, char *source) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| if (t->type != UNSET && t->type != TUNER_ABSENT) { |
| if (t->type != type) |
| printk("tuner: type already set to %d, " |
| "ignoring request for %d\n", t->type, type); |
| return; |
| } |
| if (type >= TUNERS) |
| return; |
| |
| t->type = type; |
| printk("tuner: type set to %d (%s) by %s\n", |
| t->type,tuners[t->type].name, source); |
| strlcpy(c->name, tuners[t->type].name, sizeof(c->name)); |
| |
| switch (t->type) { |
| case TUNER_MT2032: |
| microtune_init(c); |
| break; |
| default: |
| t->tv_freq = default_set_tv_freq; |
| t->radio_freq = default_set_radio_freq; |
| break; |
| } |
| } |
| |
| static char pal[] = "-"; |
| module_param_string(pal, pal, 0644, sizeof(pal)); |
| |
| static int tuner_fixup_std(struct tuner *t) |
| { |
| if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { |
| /* get more precise norm info from insmod option */ |
| switch (pal[0]) { |
| case 'b': |
| case 'B': |
| case 'g': |
| case 'G': |
| dprintk("insmod fixup: PAL => PAL-BG\n"); |
| t->std = V4L2_STD_PAL_BG; |
| break; |
| case 'i': |
| case 'I': |
| dprintk("insmod fixup: PAL => PAL-I\n"); |
| t->std = V4L2_STD_PAL_I; |
| break; |
| case 'd': |
| case 'D': |
| case 'k': |
| case 'K': |
| dprintk("insmod fixup: PAL => PAL-DK\n"); |
| t->std = V4L2_STD_PAL_DK; |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) |
| { |
| struct tuner *t; |
| struct i2c_client *client; |
| |
| if (this_adap > 0) |
| return -1; |
| this_adap++; |
| |
| client_template.adapter = adap; |
| client_template.addr = addr; |
| |
| printk("tuner: chip found at addr 0x%x i2c-bus %s\n", |
| addr<<1, adap->name); |
| |
| if (NULL == (client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) |
| return -ENOMEM; |
| memcpy(client,&client_template,sizeof(struct i2c_client)); |
| t = kmalloc(sizeof(struct tuner),GFP_KERNEL); |
| if (NULL == t) { |
| kfree(client); |
| return -ENOMEM; |
| } |
| memset(t,0,sizeof(struct tuner)); |
| i2c_set_clientdata(client, t); |
| t->type = UNSET; |
| t->radio_if2 = 10700*1000; // 10.7MHz - FM radio |
| |
| i2c_attach_client(client); |
| if (type < TUNERS) { |
| set_type(client, type, "insmod option"); |
| printk("tuner: The type=<n> insmod option will go away soon.\n"); |
| printk("tuner: Please use the tuner=<n> option provided by\n"); |
| printk("tuner: tv aard core driver (bttv, saa7134, ...) instead.\n"); |
| } |
| return 0; |
| } |
| |
| static int tuner_probe(struct i2c_adapter *adap) |
| { |
| if (0 != addr) { |
| normal_i2c_range[0] = addr; |
| normal_i2c_range[1] = addr; |
| } |
| this_adap = 0; |
| |
| #ifdef I2C_CLASS_TV_ANALOG |
| if (adap->class & I2C_CLASS_TV_ANALOG) |
| return i2c_probe(adap, &addr_data, tuner_attach); |
| #else |
| switch (adap->id) { |
| case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3: |
| case I2C_ALGO_BIT | I2C_HW_B_BT848: |
| case I2C_ALGO_BIT | I2C_HW_B_RIVA: |
| case I2C_ALGO_SAA7134: |
| case I2C_ALGO_SAA7146: |
| return i2c_probe(adap, &addr_data, tuner_attach); |
| break; |
| } |
| #endif |
| return 0; |
| } |
| |
| static int tuner_detach(struct i2c_client *client) |
| { |
| struct tuner *t = i2c_get_clientdata(client); |
| |
| i2c_detach_client(client); |
| kfree(t); |
| kfree(client); |
| return 0; |
| } |
| |
| #define SWITCH_V4L2 if (!t->using_v4l2 && debug) \ |
| printk("tuner: switching to v4l2\n"); \ |
| t->using_v4l2 = 1; |
| #define CHECK_V4L2 if (t->using_v4l2) { if (debug) \ |
| printk("tuner: ignore v4l1 call\n"); \ |
| return 0; } |
| |
| static int |
| tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) |
| { |
| struct tuner *t = i2c_get_clientdata(client); |
| unsigned int *iarg = (int*)arg; |
| |
| switch (cmd) { |
| |
| /* --- configuration --- */ |
| case TUNER_SET_TYPE: |
| set_type(client,*iarg,client->adapter->name); |
| break; |
| case AUDC_SET_RADIO: |
| if (V4L2_TUNER_RADIO != t->mode) { |
| set_tv_freq(client,400 * 16); |
| t->mode = V4L2_TUNER_RADIO; |
| } |
| break; |
| case AUDC_CONFIG_PINNACLE: |
| switch (*iarg) { |
| case 2: |
| dprintk("tuner: pinnacle pal\n"); |
| t->radio_if2 = 33300 * 1000; |
| break; |
| case 3: |
| dprintk("tuner: pinnacle ntsc\n"); |
| t->radio_if2 = 41300 * 1000; |
| break; |
| } |
| break; |
| |
| /* --- v4l ioctls --- */ |
| /* take care: bttv does userspace copying, we'll get a |
| kernel pointer here... */ |
| case VIDIOCSCHAN: |
| { |
| static const v4l2_std_id map[] = { |
| [ VIDEO_MODE_PAL ] = V4L2_STD_PAL, |
| [ VIDEO_MODE_NTSC ] = V4L2_STD_NTSC_M, |
| [ VIDEO_MODE_SECAM ] = V4L2_STD_SECAM, |
| [ 4 /* bttv */ ] = V4L2_STD_PAL_M, |
| [ 5 /* bttv */ ] = V4L2_STD_PAL_N, |
| [ 6 /* bttv */ ] = V4L2_STD_NTSC_M_JP, |
| }; |
| struct video_channel *vc = arg; |
| |
| CHECK_V4L2; |
| t->mode = V4L2_TUNER_ANALOG_TV; |
| if (vc->norm < ARRAY_SIZE(map)) |
| t->std = map[vc->norm]; |
| tuner_fixup_std(t); |
| if (t->freq) |
| set_tv_freq(client,t->freq); |
| return 0; |
| } |
| case VIDIOCSFREQ: |
| { |
| unsigned long *v = arg; |
| |
| CHECK_V4L2; |
| set_freq(client,*v); |
| return 0; |
| } |
| case VIDIOCGTUNER: |
| { |
| struct video_tuner *vt = arg; |
| |
| CHECK_V4L2; |
| if (V4L2_TUNER_RADIO == t->mode) |
| vt->signal = tuner_signal(client); |
| return 0; |
| } |
| case VIDIOCGAUDIO: |
| { |
| struct video_audio *va = arg; |
| |
| CHECK_V4L2; |
| if (V4L2_TUNER_RADIO == t->mode) |
| va->mode = (tuner_stereo(client) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO); |
| return 0; |
| } |
| |
| case VIDIOC_S_STD: |
| { |
| v4l2_std_id *id = arg; |
| |
| SWITCH_V4L2; |
| t->mode = V4L2_TUNER_ANALOG_TV; |
| t->std = *id; |
| tuner_fixup_std(t); |
| if (t->freq) |
| set_freq(client,t->freq); |
| break; |
| } |
| case VIDIOC_S_FREQUENCY: |
| { |
| struct v4l2_frequency *f = arg; |
| |
| SWITCH_V4L2; |
| if (V4L2_TUNER_RADIO == f->type && |
| V4L2_TUNER_RADIO != t->mode) |
| set_tv_freq(client,400*16); |
| t->mode = f->type; |
| t->freq = f->frequency; |
| set_freq(client,t->freq); |
| break; |
| } |
| case VIDIOC_G_TUNER: |
| { |
| struct v4l2_tuner *tuner = arg; |
| |
| SWITCH_V4L2; |
| if (V4L2_TUNER_RADIO == t->mode) |
| tuner->signal = tuner_signal(client); |
| break; |
| } |
| default: |
| /* nothing */ |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int tuner_suspend(struct device * dev, u32 state, u32 level) |
| { |
| dprintk("tuner: suspend\n"); |
| /* FIXME: power down ??? */ |
| return 0; |
| } |
| |
| static int tuner_resume(struct device * dev, u32 level) |
| { |
| struct i2c_client *c = container_of(dev, struct i2c_client, dev); |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| dprintk("tuner: resume\n"); |
| if (t->freq) |
| set_freq(c,t->freq); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static struct i2c_driver driver = { |
| .owner = THIS_MODULE, |
| .name = "i2c TV tuner driver", |
| .id = I2C_DRIVERID_TUNER, |
| .flags = I2C_DF_NOTIFY, |
| .attach_adapter = tuner_probe, |
| .detach_client = tuner_detach, |
| .command = tuner_command, |
| .driver = { |
| .suspend = tuner_suspend, |
| .resume = tuner_resume, |
| }, |
| }; |
| static struct i2c_client client_template = |
| { |
| I2C_DEVNAME("(tuner unset)"), |
| .flags = I2C_CLIENT_ALLOW_USE, |
| .driver = &driver, |
| }; |
| |
| static int __init tuner_init_module(void) |
| { |
| return i2c_add_driver(&driver); |
| } |
| |
| static void __exit tuner_cleanup_module(void) |
| { |
| i2c_del_driver(&driver); |
| } |
| |
| module_init(tuner_init_module); |
| module_exit(tuner_cleanup_module); |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |