| # | |
| # I2C Sensor device configuration | |
| # | |
| menu "Hardware Sensors Chip support" | |
| depends on I2C | |
| config I2C_SENSOR | |
| tristate | |
| default n | |
| config SENSORS_ADM1021 | |
| tristate "Analog Devices ADM1021 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Analog Devices ADM1021 | |
| and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
| Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, | |
| and the XEON processor built-in sensor. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1021. | |
| config SENSORS_ADM1025 | |
| tristate "Analog Devices ADM1025 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Analog Devices ADM1025 | |
| and Philips NE1619 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1025. | |
| config SENSORS_ADM1026 | |
| tristate "Analog Devices ADM1026 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Analog Devices ADM1026 | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1026. | |
| config SENSORS_ADM1031 | |
| tristate "Analog Devices ADM1031 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Analog Devices ADM1031 | |
| and ADM1030 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1031. | |
| config SENSORS_ASB100 | |
| tristate "Asus ASB100 Bach" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the ASB100 Bach sensor | |
| chip found on some Asus mainboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called asb100. | |
| config SENSORS_DS1621 | |
| tristate "Dallas Semiconductor DS1621 and DS1625" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Dallas Semiconductor | |
| DS1621 and DS1625 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called ds1621. | |
| config SENSORS_FSCHER | |
| tristate "FSC Hermes" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Fujitsu Siemens | |
| Computers Hermes sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called fscher. | |
| config SENSORS_GL518SM | |
| tristate "Genesys Logic GL518SM" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Genesys Logic GL518SM | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called gl518sm. | |
| config SENSORS_IT87 | |
| tristate "ITE IT87xx and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for ITE IT87xx sensor chips | |
| and clones: SiS960. | |
| This driver can also be built as a module. If so, the module | |
| will be called it87. | |
| config SENSORS_LM63 | |
| tristate "National Semiconductor LM63" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| LM63 remote diode digital temperature sensor with integrated fan | |
| control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) | |
| motherboard, among others. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm63. | |
| config SENSORS_LM75 | |
| tristate "National Semiconductor LM75 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM75 | |
| sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in | |
| 9-bit precision mode), and TelCom (now Microchip) TCN75. | |
| The DS75 and DS1775 in 10- to 12-bit precision modes will require | |
| a force module parameter. The driver will not handle the extra | |
| precision anyhow. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm75. | |
| config SENSORS_LM77 | |
| tristate "National Semiconductor LM77" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM77 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm77. | |
| config SENSORS_LM78 | |
| tristate "National Semiconductor LM78 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM78, | |
| LM78-J and LM79. This can also be built as a module which can be | |
| inserted and removed while the kernel is running. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm78. | |
| config SENSORS_LM80 | |
| tristate "National Semiconductor LM80" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM80 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm80. | |
| config SENSORS_LM83 | |
| tristate "National Semiconductor LM83" | |
| depends on I2C | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM83 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm83. | |
| config SENSORS_LM85 | |
| tristate "National Semiconductor LM85 and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM85 | |
| sensor chips and clones: ADT7463 and ADM1027. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm85. | |
| config SENSORS_LM87 | |
| tristate "National Semiconductor LM87" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM87 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm87. | |
| config SENSORS_LM90 | |
| tristate "National Semiconductor LM90 and compatibles" | |
| depends on I2C | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for National Semiconductor LM90, | |
| LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and | |
| MAX6658 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm90. | |
| config SENSORS_MAX1619 | |
| tristate "Maxim MAX1619 sensor chip" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for MAX1619 sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1619. | |
| config SENSORS_PC87360 | |
| tristate "National Semiconductor PC87360 family" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| select I2C_ISA | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the National Semiconductor PC8736x Super-I/O chips. | |
| The PC87360, PC87363 and PC87364 only have fan monitoring and | |
| control. The PC87365 and PC87366 additionally have voltage and | |
| temperature monitoring. | |
| This driver can also be built as a module. If so, the module | |
| will be called pc87360. | |
| config SENSORS_SMSC47B397 | |
| tristate "SMSC LPC47B397-NC" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| select I2C_ISA | |
| help | |
| If you say yes here you get support for the SMSC LPC47B397-NC | |
| sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47b397. | |
| config SENSORS_SMSC47M1 | |
| tristate "SMSC LPC47M10x and compatibles" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| select I2C_ISA | |
| help | |
| If you say yes here you get support for the integrated fan | |
| monitoring and control capabilities of the SMSC LPC47B27x, | |
| LPC47M10x, LPC47M13x and LPC47M14x chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47m1. | |
| config SENSORS_VIA686A | |
| tristate "VIA686A" | |
| depends on I2C && PCI && EXPERIMENTAL | |
| select I2C_SENSOR | |
| select I2C_ISA | |
| help | |
| If you say yes here you get support for the integrated sensors in | |
| Via 686A/B South Bridges. | |
| This driver can also be built as a module. If so, the module | |
| will be called via686a. | |
| config SENSORS_W83781D | |
| tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the Winbond W8378x series | |
| of sensor chips: the W83781D, W83782D, W83783S and W83627HF, | |
| and the similar Asus AS99127F. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83781d. | |
| config SENSORS_W83L785TS | |
| tristate "Winbond W83L785TS-S" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the Winbond W83L785TS-S | |
| sensor chip, which is used on the Asus A7N8X, among other | |
| motherboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83l785ts. | |
| config SENSORS_W83627HF | |
| tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the Winbond W836X7 series | |
| of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF | |
| This driver can also be built as a module. If so, the module | |
| will be called w83627hf. | |
| endmenu | |
| menu "Other I2C Chip support" | |
| depends on I2C | |
| config SENSORS_EEPROM | |
| tristate "EEPROM reader" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get read-only access to the EEPROM data | |
| available on modern memory DIMMs and Sony Vaio laptops. Such | |
| EEPROMs could theoretically be available on other devices as well. | |
| This driver can also be built as a module. If so, the module | |
| will be called eeprom. | |
| config SENSORS_PCF8574 | |
| tristate "Philips PCF8574 and PCF8574A" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Philips PCF8574 and | |
| PCF8574A chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8574. | |
| config SENSORS_PCF8591 | |
| tristate "Philips PCF8591" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for Philips PCF8591 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8591. | |
| config SENSORS_RTC8564 | |
| tristate "Epson 8564 RTC chip" | |
| depends on I2C && EXPERIMENTAL | |
| select I2C_SENSOR | |
| help | |
| If you say yes here you get support for the Epson 8564 RTC chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called i2c-rtc8564. | |
| config ISP1301_OMAP | |
| tristate "Philips ISP1301 with OMAP OTG" | |
| depends on I2C && ARCH_OMAP_OTG | |
| help | |
| If you say yes here you get support for the Philips ISP1301 | |
| USB-On-The-Go transceiver working with the OMAP OTG controller. | |
| The ISP1301 is used in products including H2 and H3 development | |
| boards for Texas Instruments OMAP processors. | |
| This driver can also be built as a module. If so, the module | |
| will be called isp1301_omap. | |
| endmenu |