| /* | |
| * X86-64 specific CPU setup. | |
| * Copyright (C) 1995 Linus Torvalds | |
| * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen. | |
| * See setup.c for older changelog. | |
| * $Id: setup64.c,v 1.12 2002/03/21 10:09:17 ak Exp $ | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/string.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/bitops.h> | |
| #include <asm/pda.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/processor.h> | |
| #include <asm/desc.h> | |
| #include <asm/atomic.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/smp.h> | |
| #include <asm/i387.h> | |
| #include <asm/percpu.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/proto.h> | |
| #include <asm/mman.h> | |
| #include <asm/numa.h> | |
| char x86_boot_params[2048] __initdata = {0,}; | |
| cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; | |
| struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; | |
| extern struct task_struct init_task; | |
| extern unsigned char __per_cpu_start[], __per_cpu_end[]; | |
| extern struct desc_ptr cpu_gdt_descr[]; | |
| struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; | |
| char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); | |
| unsigned long __supported_pte_mask = ~0UL; | |
| static int do_not_nx __initdata = 0; | |
| /* noexec=on|off | |
| Control non executable mappings for 64bit processes. | |
| on Enable(default) | |
| off Disable | |
| */ | |
| int __init nonx_setup(char *str) | |
| { | |
| if (!strncmp(str, "on", 2)) { | |
| __supported_pte_mask |= _PAGE_NX; | |
| do_not_nx = 0; | |
| } else if (!strncmp(str, "off", 3)) { | |
| do_not_nx = 1; | |
| __supported_pte_mask &= ~_PAGE_NX; | |
| } | |
| return 0; | |
| } | |
| __setup("noexec=", nonx_setup); /* parsed early actually */ | |
| int force_personality32 = READ_IMPLIES_EXEC; | |
| /* noexec32=on|off | |
| Control non executable heap for 32bit processes. | |
| To control the stack too use noexec=off | |
| on PROT_READ does not imply PROT_EXEC for 32bit processes | |
| off PROT_READ implies PROT_EXEC (default) | |
| */ | |
| static int __init nonx32_setup(char *str) | |
| { | |
| if (!strcmp(str, "on")) | |
| force_personality32 &= ~READ_IMPLIES_EXEC; | |
| else if (!strcmp(str, "off")) | |
| force_personality32 |= READ_IMPLIES_EXEC; | |
| return 0; | |
| } | |
| __setup("noexec32=", nonx32_setup); | |
| /* | |
| * Great future plan: | |
| * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. | |
| * Always point %gs to its beginning | |
| */ | |
| void __init setup_per_cpu_areas(void) | |
| { | |
| int i; | |
| unsigned long size; | |
| /* Copy section for each CPU (we discard the original) */ | |
| size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); | |
| #ifdef CONFIG_MODULES | |
| if (size < PERCPU_ENOUGH_ROOM) | |
| size = PERCPU_ENOUGH_ROOM; | |
| #endif | |
| for (i = 0; i < NR_CPUS; i++) { | |
| unsigned char *ptr; | |
| if (!NODE_DATA(cpu_to_node(i))) { | |
| printk("cpu with no node %d, num_online_nodes %d\n", | |
| i, num_online_nodes()); | |
| ptr = alloc_bootmem(size); | |
| } else { | |
| ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size); | |
| } | |
| if (!ptr) | |
| panic("Cannot allocate cpu data for CPU %d\n", i); | |
| cpu_pda[i].data_offset = ptr - __per_cpu_start; | |
| memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); | |
| } | |
| } | |
| void pda_init(int cpu) | |
| { | |
| struct x8664_pda *pda = &cpu_pda[cpu]; | |
| /* Setup up data that may be needed in __get_free_pages early */ | |
| asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); | |
| wrmsrl(MSR_GS_BASE, cpu_pda + cpu); | |
| pda->me = pda; | |
| pda->cpunumber = cpu; | |
| pda->irqcount = -1; | |
| pda->kernelstack = | |
| (unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; | |
| pda->active_mm = &init_mm; | |
| pda->mmu_state = 0; | |
| if (cpu == 0) { | |
| /* others are initialized in smpboot.c */ | |
| pda->pcurrent = &init_task; | |
| pda->irqstackptr = boot_cpu_stack; | |
| } else { | |
| pda->irqstackptr = (char *) | |
| __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); | |
| if (!pda->irqstackptr) | |
| panic("cannot allocate irqstack for cpu %d", cpu); | |
| } | |
| asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); | |
| pda->irqstackptr += IRQSTACKSIZE-64; | |
| } | |
| char boot_exception_stacks[N_EXCEPTION_STACKS * EXCEPTION_STKSZ] | |
| __attribute__((section(".bss.page_aligned"))); | |
| /* May not be marked __init: used by software suspend */ | |
| void syscall_init(void) | |
| { | |
| /* | |
| * LSTAR and STAR live in a bit strange symbiosis. | |
| * They both write to the same internal register. STAR allows to set CS/DS | |
| * but only a 32bit target. LSTAR sets the 64bit rip. | |
| */ | |
| wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); | |
| wrmsrl(MSR_LSTAR, system_call); | |
| #ifdef CONFIG_IA32_EMULATION | |
| syscall32_cpu_init (); | |
| #endif | |
| /* Flags to clear on syscall */ | |
| wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); | |
| } | |
| void __init check_efer(void) | |
| { | |
| unsigned long efer; | |
| rdmsrl(MSR_EFER, efer); | |
| if (!(efer & EFER_NX) || do_not_nx) { | |
| __supported_pte_mask &= ~_PAGE_NX; | |
| } | |
| } | |
| /* | |
| * cpu_init() initializes state that is per-CPU. Some data is already | |
| * initialized (naturally) in the bootstrap process, such as the GDT | |
| * and IDT. We reload them nevertheless, this function acts as a | |
| * 'CPU state barrier', nothing should get across. | |
| * A lot of state is already set up in PDA init. | |
| */ | |
| void __init cpu_init (void) | |
| { | |
| #ifdef CONFIG_SMP | |
| int cpu = stack_smp_processor_id(); | |
| #else | |
| int cpu = smp_processor_id(); | |
| #endif | |
| struct tss_struct *t = &per_cpu(init_tss, cpu); | |
| unsigned long v; | |
| char *estacks = NULL; | |
| struct task_struct *me; | |
| int i; | |
| /* CPU 0 is initialised in head64.c */ | |
| if (cpu != 0) { | |
| pda_init(cpu); | |
| } else | |
| estacks = boot_exception_stacks; | |
| me = current; | |
| if (cpu_test_and_set(cpu, cpu_initialized)) | |
| panic("CPU#%d already initialized!\n", cpu); | |
| printk("Initializing CPU#%d\n", cpu); | |
| clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); | |
| /* | |
| * Initialize the per-CPU GDT with the boot GDT, | |
| * and set up the GDT descriptor: | |
| */ | |
| if (cpu) { | |
| memcpy(cpu_gdt_table[cpu], cpu_gdt_table[0], GDT_SIZE); | |
| } | |
| cpu_gdt_descr[cpu].size = GDT_SIZE; | |
| cpu_gdt_descr[cpu].address = (unsigned long)cpu_gdt_table[cpu]; | |
| asm volatile("lgdt %0" :: "m" (cpu_gdt_descr[cpu])); | |
| asm volatile("lidt %0" :: "m" (idt_descr)); | |
| memcpy(me->thread.tls_array, cpu_gdt_table[cpu], GDT_ENTRY_TLS_ENTRIES * 8); | |
| /* | |
| * Delete NT | |
| */ | |
| asm volatile("pushfq ; popq %%rax ; btr $14,%%rax ; pushq %%rax ; popfq" ::: "eax"); | |
| syscall_init(); | |
| wrmsrl(MSR_FS_BASE, 0); | |
| wrmsrl(MSR_KERNEL_GS_BASE, 0); | |
| barrier(); | |
| check_efer(); | |
| /* | |
| * set up and load the per-CPU TSS | |
| */ | |
| for (v = 0; v < N_EXCEPTION_STACKS; v++) { | |
| if (cpu) { | |
| estacks = (char *)__get_free_pages(GFP_ATOMIC, | |
| EXCEPTION_STACK_ORDER); | |
| if (!estacks) | |
| panic("Cannot allocate exception stack %ld %d\n", | |
| v, cpu); | |
| } | |
| estacks += EXCEPTION_STKSZ; | |
| t->ist[v] = (unsigned long)estacks; | |
| } | |
| t->io_bitmap_base = offsetof(struct tss_struct, io_bitmap); | |
| /* | |
| * <= is required because the CPU will access up to | |
| * 8 bits beyond the end of the IO permission bitmap. | |
| */ | |
| for (i = 0; i <= IO_BITMAP_LONGS; i++) | |
| t->io_bitmap[i] = ~0UL; | |
| atomic_inc(&init_mm.mm_count); | |
| me->active_mm = &init_mm; | |
| if (me->mm) | |
| BUG(); | |
| enter_lazy_tlb(&init_mm, me); | |
| set_tss_desc(cpu, t); | |
| load_TR_desc(); | |
| load_LDT(&init_mm.context); | |
| /* | |
| * Clear all 6 debug registers: | |
| */ | |
| set_debug(0UL, 0); | |
| set_debug(0UL, 1); | |
| set_debug(0UL, 2); | |
| set_debug(0UL, 3); | |
| set_debug(0UL, 6); | |
| set_debug(0UL, 7); | |
| fpu_init(); | |
| } |