| /* | |
| * Copyright 2004 James Cleverdon, IBM. | |
| * Subject to the GNU Public License, v.2 | |
| * | |
| * Flat APIC subarch code. Maximum 8 CPUs, logical delivery. | |
| * | |
| * Hacked for x86-64 by James Cleverdon from i386 architecture code by | |
| * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and | |
| * James Cleverdon. | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/threads.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/ctype.h> | |
| #include <linux/init.h> | |
| #include <asm/smp.h> | |
| #include <asm/ipi.h> | |
| static cpumask_t flat_target_cpus(void) | |
| { | |
| return cpu_online_map; | |
| } | |
| /* | |
| * Set up the logical destination ID. | |
| * | |
| * Intel recommends to set DFR, LDR and TPR before enabling | |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel | |
| * document number 292116). So here it goes... | |
| */ | |
| static void flat_init_apic_ldr(void) | |
| { | |
| unsigned long val; | |
| unsigned long num, id; | |
| num = smp_processor_id(); | |
| id = 1UL << num; | |
| x86_cpu_to_log_apicid[num] = id; | |
| apic_write_around(APIC_DFR, APIC_DFR_FLAT); | |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; | |
| val |= SET_APIC_LOGICAL_ID(id); | |
| apic_write_around(APIC_LDR, val); | |
| } | |
| static void flat_send_IPI_allbutself(int vector) | |
| { | |
| /* | |
| * if there are no other CPUs in the system then | |
| * we get an APIC send error if we try to broadcast. | |
| * thus we have to avoid sending IPIs in this case. | |
| */ | |
| if (num_online_cpus() > 1) | |
| __send_IPI_shortcut(APIC_DEST_ALLBUT, vector, APIC_DEST_LOGICAL); | |
| } | |
| static void flat_send_IPI_all(int vector) | |
| { | |
| __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); | |
| } | |
| static void flat_send_IPI_mask(cpumask_t cpumask, int vector) | |
| { | |
| unsigned long mask = cpus_addr(cpumask)[0]; | |
| unsigned long cfg; | |
| unsigned long flags; | |
| local_save_flags(flags); | |
| local_irq_disable(); | |
| /* | |
| * Wait for idle. | |
| */ | |
| apic_wait_icr_idle(); | |
| /* | |
| * prepare target chip field | |
| */ | |
| cfg = __prepare_ICR2(mask); | |
| apic_write_around(APIC_ICR2, cfg); | |
| /* | |
| * program the ICR | |
| */ | |
| cfg = __prepare_ICR(0, vector, APIC_DEST_LOGICAL); | |
| /* | |
| * Send the IPI. The write to APIC_ICR fires this off. | |
| */ | |
| apic_write_around(APIC_ICR, cfg); | |
| local_irq_restore(flags); | |
| } | |
| static int flat_apic_id_registered(void) | |
| { | |
| return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); | |
| } | |
| static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) | |
| { | |
| return cpus_addr(cpumask)[0] & APIC_ALL_CPUS; | |
| } | |
| static unsigned int phys_pkg_id(int index_msb) | |
| { | |
| u32 ebx; | |
| ebx = cpuid_ebx(1); | |
| return ((ebx >> 24) & 0xFF) >> index_msb; | |
| } | |
| struct genapic apic_flat = { | |
| .name = "flat", | |
| .int_delivery_mode = dest_LowestPrio, | |
| .int_dest_mode = (APIC_DEST_LOGICAL != 0), | |
| .int_delivery_dest = APIC_DEST_LOGICAL | APIC_DM_LOWEST, | |
| .target_cpus = flat_target_cpus, | |
| .apic_id_registered = flat_apic_id_registered, | |
| .init_apic_ldr = flat_init_apic_ldr, | |
| .send_IPI_all = flat_send_IPI_all, | |
| .send_IPI_allbutself = flat_send_IPI_allbutself, | |
| .send_IPI_mask = flat_send_IPI_mask, | |
| .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, | |
| .phys_pkg_id = phys_pkg_id, | |
| }; |