| /* | |
| * linux/arch/sh/kernel/setup_sh2000.c | |
| * | |
| * Copyright (C) 2001 SUGIOKA Tochinobu | |
| * | |
| * SH-2000 Support. | |
| * | |
| */ | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/machvec.h> | |
| #include <asm/mach/sh2000.h> | |
| #define CF_CIS_BASE 0xb4200000 | |
| #define PORT_PECR 0xa4000108 | |
| #define PORT_PHCR 0xa400010E | |
| #define PORT_ICR1 0xa4000010 | |
| #define PORT_IRR0 0xa4000004 | |
| #define IDE_OFFSET 0xb6200000 | |
| #define NIC_OFFSET 0xb6000000 | |
| #define EXTBUS_OFFSET 0xba000000 | |
| const char *get_system_type(void) | |
| { | |
| return "sh2000"; | |
| } | |
| static unsigned long sh2000_isa_port2addr(unsigned long offset) | |
| { | |
| if((offset & ~7) == 0x1f0 || offset == 0x3f6) | |
| return IDE_OFFSET + offset; | |
| else if((offset & ~0x1f) == 0x300) | |
| return NIC_OFFSET + offset; | |
| return EXTBUS_OFFSET + offset; | |
| } | |
| /* | |
| * The Machine Vector | |
| */ | |
| struct sh_machine_vector mv_sh2000 __initmv = { | |
| .mv_nr_irqs = 80, | |
| .mv_isa_port2addr = sh2000_isa_port2addr, | |
| }; | |
| ALIAS_MV(sh2000) | |
| /* | |
| * Initialize the board | |
| */ | |
| int __init platform_setup(void) | |
| { | |
| /* XXX: RTC setting comes here */ | |
| /* These should be done by BIOS/IPL ... */ | |
| /* Enable nCE2A, nCE2B output */ | |
| ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR); | |
| /* Enable the Compact Flash card, and set the level interrupt */ | |
| ctrl_outw(0x0042, CF_CIS_BASE+0x0200); | |
| /* Enable interrupt */ | |
| ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR); | |
| ctrl_outw(1, PORT_ICR1); | |
| ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0); | |
| printk(KERN_INFO "SH-2000 Setup...done\n"); | |
| return 0; | |
| } |