| /* | 
 |  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) | 
 |  * Licensed under the GPL | 
 |  */ | 
 |  | 
 | #include "linux/audit.h" | 
 | #include "linux/ptrace.h" | 
 | #include "linux/sched.h" | 
 | #include "asm/uaccess.h" | 
 | #ifdef CONFIG_PROC_MM | 
 | #include "proc_mm.h" | 
 | #endif | 
 | #include "skas_ptrace.h" | 
 |  | 
 | static inline void set_singlestepping(struct task_struct *child, int on) | 
 | { | 
 | 	if (on) | 
 | 		child->ptrace |= PT_DTRACE; | 
 | 	else | 
 | 		child->ptrace &= ~PT_DTRACE; | 
 | 	child->thread.singlestep_syscall = 0; | 
 |  | 
 | #ifdef SUBARCH_SET_SINGLESTEPPING | 
 | 	SUBARCH_SET_SINGLESTEPPING(child, on); | 
 | #endif | 
 | } | 
 |  | 
 | /* | 
 |  * Called by kernel/ptrace.c when detaching.. | 
 |  */ | 
 | void ptrace_disable(struct task_struct *child) | 
 | { | 
 | 	set_singlestepping(child,0); | 
 | } | 
 |  | 
 | extern int peek_user(struct task_struct * child, long addr, long data); | 
 | extern int poke_user(struct task_struct * child, long addr, long data); | 
 |  | 
 | long arch_ptrace(struct task_struct *child, long request, long addr, long data) | 
 | { | 
 | 	int i, ret; | 
 | 	unsigned long __user *p = (void __user *)(unsigned long)data; | 
 |  | 
 | 	switch (request) { | 
 | 	/* read word at location addr. */ | 
 | 	case PTRACE_PEEKTEXT: | 
 | 	case PTRACE_PEEKDATA: | 
 | 		ret = generic_ptrace_peekdata(child, addr, data); | 
 | 		break; | 
 |  | 
 | 	/* read the word at location addr in the USER area. */ | 
 | 	case PTRACE_PEEKUSR: | 
 | 		ret = peek_user(child, addr, data); | 
 | 		break; | 
 |  | 
 | 	/* write the word at location addr. */ | 
 | 	case PTRACE_POKETEXT: | 
 | 	case PTRACE_POKEDATA: | 
 | 		ret = generic_ptrace_pokedata(child, addr, data); | 
 | 		break; | 
 |  | 
 | 	/* write the word at location addr in the USER area */ | 
 | 	case PTRACE_POKEUSR: | 
 | 		ret = poke_user(child, addr, data); | 
 | 		break; | 
 |  | 
 | 	/* continue and stop at next (return from) syscall */ | 
 | 	case PTRACE_SYSCALL: | 
 | 	/* restart after signal. */ | 
 | 	case PTRACE_CONT: { | 
 | 		ret = -EIO; | 
 | 		if (!valid_signal(data)) | 
 | 			break; | 
 |  | 
 | 		set_singlestepping(child, 0); | 
 | 		if (request == PTRACE_SYSCALL) | 
 | 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		else clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		child->exit_code = data; | 
 | 		wake_up_process(child); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | /* | 
 |  * make the child exit.  Best I can do is send it a sigkill. | 
 |  * perhaps it should be put in the status that it wants to | 
 |  * exit. | 
 |  */ | 
 | 	case PTRACE_KILL: { | 
 | 		ret = 0; | 
 | 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */ | 
 | 			break; | 
 |  | 
 | 		set_singlestepping(child, 0); | 
 | 		child->exit_code = SIGKILL; | 
 | 		wake_up_process(child); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	case PTRACE_SINGLESTEP: {  /* set the trap flag. */ | 
 | 		ret = -EIO; | 
 | 		if (!valid_signal(data)) | 
 | 			break; | 
 | 		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | 
 | 		set_singlestepping(child, 1); | 
 | 		child->exit_code = data; | 
 | 		/* give it a chance to run. */ | 
 | 		wake_up_process(child); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | #ifdef PTRACE_GETREGS | 
 | 	case PTRACE_GETREGS: { /* Get all gp regs from the child. */ | 
 | 		if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) { | 
 | 			ret = -EIO; | 
 | 			break; | 
 | 		} | 
 | 		for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) { | 
 | 			__put_user(getreg(child, i), p); | 
 | 			p++; | 
 | 		} | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 | #endif | 
 | #ifdef PTRACE_SETREGS | 
 | 	case PTRACE_SETREGS: { /* Set all gp regs in the child. */ | 
 | 		unsigned long tmp = 0; | 
 | 		if (!access_ok(VERIFY_READ, p, MAX_REG_OFFSET)) { | 
 | 			ret = -EIO; | 
 | 			break; | 
 | 		} | 
 | 		for ( i = 0; i < MAX_REG_OFFSET; i += sizeof(long) ) { | 
 | 			__get_user(tmp, p); | 
 | 			putreg(child, i, tmp); | 
 | 			p++; | 
 | 		} | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 | #endif | 
 | #ifdef PTRACE_GETFPREGS | 
 | 	case PTRACE_GETFPREGS: /* Get the child FPU state. */ | 
 | 		ret = get_fpregs((struct user_i387_struct __user *) data, | 
 | 				 child); | 
 | 		break; | 
 | #endif | 
 | #ifdef PTRACE_SETFPREGS | 
 | 	case PTRACE_SETFPREGS: /* Set the child FPU state. */ | 
 | 	        ret = set_fpregs((struct user_i387_struct __user *) data, | 
 | 				 child); | 
 | 		break; | 
 | #endif | 
 | 	case PTRACE_GET_THREAD_AREA: | 
 | 		ret = ptrace_get_thread_area(child, addr, | 
 | 					     (struct user_desc __user *) data); | 
 | 		break; | 
 |  | 
 | 	case PTRACE_SET_THREAD_AREA: | 
 | 		ret = ptrace_set_thread_area(child, addr, | 
 | 					     (struct user_desc __user *) data); | 
 | 		break; | 
 |  | 
 | 	case PTRACE_FAULTINFO: { | 
 | 		/* | 
 | 		 * Take the info from thread->arch->faultinfo, | 
 | 		 * but transfer max. sizeof(struct ptrace_faultinfo). | 
 | 		 * On i386, ptrace_faultinfo is smaller! | 
 | 		 */ | 
 | 		ret = copy_to_user(p, &child->thread.arch.faultinfo, | 
 | 				   sizeof(struct ptrace_faultinfo)); | 
 | 		break; | 
 | 	} | 
 |  | 
 | #ifdef PTRACE_LDT | 
 | 	case PTRACE_LDT: { | 
 | 		struct ptrace_ldt ldt; | 
 |  | 
 | 		if (copy_from_user(&ldt, p, sizeof(ldt))) { | 
 | 			ret = -EIO; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * This one is confusing, so just punt and return -EIO for | 
 | 		 * now | 
 | 		 */ | 
 | 		ret = -EIO; | 
 | 		break; | 
 | 	} | 
 | #endif | 
 | #ifdef CONFIG_PROC_MM | 
 | 	case PTRACE_SWITCH_MM: { | 
 | 		struct mm_struct *old = child->mm; | 
 | 		struct mm_struct *new = proc_mm_get_mm(data); | 
 |  | 
 | 		if (IS_ERR(new)) { | 
 | 			ret = PTR_ERR(new); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		atomic_inc(&new->mm_users); | 
 | 		child->mm = new; | 
 | 		child->active_mm = new; | 
 | 		mmput(old); | 
 | 		ret = 0; | 
 | 		break; | 
 | 	} | 
 | #endif | 
 | #ifdef PTRACE_ARCH_PRCTL | 
 | 	case PTRACE_ARCH_PRCTL: | 
 | 		/* XXX Calls ptrace on the host - needs some SMP thinking */ | 
 | 		ret = arch_prctl(child, data, (void *) addr); | 
 | 		break; | 
 | #endif | 
 | 	default: | 
 | 		ret = ptrace_request(child, request, addr, data); | 
 | 		if (ret == -EIO) | 
 | 			ret = subarch_ptrace(child, request, addr, data); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs, | 
 | 		  int error_code) | 
 | { | 
 | 	struct siginfo info; | 
 |  | 
 | 	memset(&info, 0, sizeof(info)); | 
 | 	info.si_signo = SIGTRAP; | 
 | 	info.si_code = TRAP_BRKPT; | 
 |  | 
 | 	/* User-mode eip? */ | 
 | 	info.si_addr = UPT_IS_USER(regs) ? (void __user *) UPT_IP(regs) : NULL; | 
 |  | 
 | 	/* Send us the fake SIGTRAP */ | 
 | 	force_sig_info(SIGTRAP, &info, tsk); | 
 | } | 
 |  | 
 | /* | 
 |  * XXX Check PT_DTRACE vs TIF_SINGLESTEP for singlestepping check and | 
 |  * PT_PTRACED vs TIF_SYSCALL_TRACE for syscall tracing check | 
 |  */ | 
 | void syscall_trace(struct uml_pt_regs *regs, int entryexit) | 
 | { | 
 | 	int is_singlestep = (current->ptrace & PT_DTRACE) && entryexit; | 
 | 	int tracesysgood; | 
 |  | 
 | 	if (unlikely(current->audit_context)) { | 
 | 		if (!entryexit) | 
 | 			audit_syscall_entry(HOST_AUDIT_ARCH, | 
 | 					    UPT_SYSCALL_NR(regs), | 
 | 					    UPT_SYSCALL_ARG1(regs), | 
 | 					    UPT_SYSCALL_ARG2(regs), | 
 | 					    UPT_SYSCALL_ARG3(regs), | 
 | 					    UPT_SYSCALL_ARG4(regs)); | 
 | 		else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), | 
 | 					UPT_SYSCALL_RET(regs)); | 
 | 	} | 
 |  | 
 | 	/* Fake a debug trap */ | 
 | 	if (is_singlestep) | 
 | 		send_sigtrap(current, regs, 0); | 
 |  | 
 | 	if (!test_thread_flag(TIF_SYSCALL_TRACE)) | 
 | 		return; | 
 |  | 
 | 	if (!(current->ptrace & PT_PTRACED)) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * the 0x80 provides a way for the tracing parent to distinguish | 
 | 	 * between a syscall stop and SIGTRAP delivery | 
 | 	 */ | 
 | 	tracesysgood = (current->ptrace & PT_TRACESYSGOOD); | 
 | 	ptrace_notify(SIGTRAP | (tracesysgood ? 0x80 : 0)); | 
 |  | 
 | 	if (entryexit) /* force do_signal() --> is_syscall() */ | 
 | 		set_thread_flag(TIF_SIGPENDING); | 
 |  | 
 | 	/* | 
 | 	 * this isn't the same as continuing with a signal, but it will do | 
 | 	 * for normal use.  strace only continues with a signal if the | 
 | 	 * stopping signal is not SIGTRAP.  -brl | 
 | 	 */ | 
 | 	if (current->exit_code) { | 
 | 		send_sig(current->exit_code, current, 1); | 
 | 		current->exit_code = 0; | 
 | 	} | 
 | } |