| /* |
| * AMD Elan SC520 processor Watchdog Timer driver |
| * |
| * Based on acquirewdt.c by Alan Cox, |
| * and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * The authors do NOT admit liability nor provide warranty for |
| * any of this software. This material is provided "AS-IS" in |
| * the hope that it may be useful for others. |
| * |
| * (c) Copyright 2001 Scott Jennings <linuxdrivers@oro.net> |
| * 9/27 - 2001 [Initial release] |
| * |
| * Additional fixes Alan Cox |
| * - Fixed formatting |
| * - Removed debug printks |
| * - Fixed SMP built kernel deadlock |
| * - Switched to private locks not lock_kernel |
| * - Used ioremap/writew/readw |
| * - Added NOWAYOUT support |
| * 4/12 - 2002 Changes by Rob Radez <rob@osinvestor.com> |
| * - Change comments |
| * - Eliminate fop_llseek |
| * - Change CONFIG_WATCHDOG_NOWAYOUT semantics |
| * - Add KERN_* tags to printks |
| * - fix possible wdt_is_open race |
| * - Report proper capabilities in watchdog_info |
| * - Add WDIOC_{GETSTATUS, GETBOOTSTATUS, SETTIMEOUT, |
| * GETTIMEOUT, SETOPTIONS} ioctls |
| * 09/8 - 2003 Changes by Wim Van Sebroeck <wim@iguana.be> |
| * - cleanup of trailing spaces |
| * - added extra printk's for startup problems |
| * - use module_param |
| * - made timeout (the emulated heartbeat) a module_param |
| * - made the keepalive ping an internal subroutine |
| * 3/27 - 2004 Changes by Sean Young <sean@mess.org> |
| * - set MMCR_BASE to 0xfffef000 |
| * - CBAR does not need to be read |
| * - removed debugging printks |
| * |
| * This WDT driver is different from most other Linux WDT |
| * drivers in that the driver will ping the watchdog by itself, |
| * because this particular WDT has a very short timeout (1.6 |
| * seconds) and it would be insane to count on any userspace |
| * daemon always getting scheduled within that time frame. |
| * |
| * This driver uses memory mapped IO, and spinlock. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/timer.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/fs.h> |
| #include <linux/ioport.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| |
| /* |
| * The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7) |
| * |
| * 0: 492us 2: 1.01s 4: 4.03s 6: 16.22s |
| * 1: 503ms 3: 2.01s 5: 8.05s 7: 32.21s |
| * |
| * We will program the SC520 watchdog for a timeout of 2.01s. |
| * If we reset the watchdog every ~250ms we should be safe. |
| */ |
| |
| #define WDT_INTERVAL (HZ/4+1) |
| |
| /* |
| * We must not require too good response from the userspace daemon. |
| * Here we require the userspace daemon to send us a heartbeat |
| * char to /dev/watchdog every 30 seconds. |
| */ |
| |
| #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ |
| /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ |
| static int timeout = WATCHDOG_TIMEOUT; |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* |
| * AMD Elan SC520 - Watchdog Timer Registers |
| */ |
| #define MMCR_BASE 0xfffef000 /* The default base address */ |
| #define OFFS_WDTMRCTL 0xCB0 /* Watchdog Timer Control Register */ |
| |
| /* WDT Control Register bit definitions */ |
| #define WDT_EXP_SEL_01 0x0001 /* [01] Time-out = 496 us (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_02 0x0002 /* [02] Time-out = 508 ms (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_03 0x0004 /* [03] Time-out = 1.02 s (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_04 0x0008 /* [04] Time-out = 2.03 s (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_05 0x0010 /* [05] Time-out = 4.07 s (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_06 0x0020 /* [06] Time-out = 8.13 s (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_07 0x0040 /* [07] Time-out = 16.27s (with 33 Mhz clk). */ |
| #define WDT_EXP_SEL_08 0x0080 /* [08] Time-out = 32.54s (with 33 Mhz clk). */ |
| #define WDT_IRQ_FLG 0x1000 /* [12] Interrupt Request Flag */ |
| #define WDT_WRST_ENB 0x4000 /* [14] Watchdog Timer Reset Enable */ |
| #define WDT_ENB 0x8000 /* [15] Watchdog Timer Enable */ |
| |
| static __u16 __iomem *wdtmrctl; |
| |
| static void wdt_timer_ping(struct timer_list *); |
| static DEFINE_TIMER(timer, wdt_timer_ping); |
| static unsigned long next_heartbeat; |
| static unsigned long wdt_is_open; |
| static char wdt_expect_close; |
| static DEFINE_SPINLOCK(wdt_spinlock); |
| |
| /* |
| * Whack the dog |
| */ |
| |
| static void wdt_timer_ping(struct timer_list *unused) |
| { |
| /* If we got a heartbeat pulse within the WDT_US_INTERVAL |
| * we agree to ping the WDT |
| */ |
| if (time_before(jiffies, next_heartbeat)) { |
| /* Ping the WDT */ |
| spin_lock(&wdt_spinlock); |
| writew(0xAAAA, wdtmrctl); |
| writew(0x5555, wdtmrctl); |
| spin_unlock(&wdt_spinlock); |
| |
| /* Re-set the timer interval */ |
| mod_timer(&timer, jiffies + WDT_INTERVAL); |
| } else |
| pr_warn("Heartbeat lost! Will not ping the watchdog\n"); |
| } |
| |
| /* |
| * Utility routines |
| */ |
| |
| static void wdt_config(int writeval) |
| { |
| unsigned long flags; |
| |
| /* buy some time (ping) */ |
| spin_lock_irqsave(&wdt_spinlock, flags); |
| readw(wdtmrctl); /* ensure write synchronization */ |
| writew(0xAAAA, wdtmrctl); |
| writew(0x5555, wdtmrctl); |
| /* unlock WDT = make WDT configuration register writable one time */ |
| writew(0x3333, wdtmrctl); |
| writew(0xCCCC, wdtmrctl); |
| /* write WDT configuration register */ |
| writew(writeval, wdtmrctl); |
| spin_unlock_irqrestore(&wdt_spinlock, flags); |
| } |
| |
| static int wdt_startup(void) |
| { |
| next_heartbeat = jiffies + (timeout * HZ); |
| |
| /* Start the timer */ |
| mod_timer(&timer, jiffies + WDT_INTERVAL); |
| |
| /* Start the watchdog */ |
| wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04); |
| |
| pr_info("Watchdog timer is now enabled\n"); |
| return 0; |
| } |
| |
| static int wdt_turnoff(void) |
| { |
| /* Stop the timer */ |
| del_timer_sync(&timer); |
| |
| /* Stop the watchdog */ |
| wdt_config(0); |
| |
| pr_info("Watchdog timer is now disabled...\n"); |
| return 0; |
| } |
| |
| static int wdt_keepalive(void) |
| { |
| /* user land ping */ |
| next_heartbeat = jiffies + (timeout * HZ); |
| return 0; |
| } |
| |
| static int wdt_set_heartbeat(int t) |
| { |
| if ((t < 1) || (t > 3600)) /* arbitrary upper limit */ |
| return -EINVAL; |
| |
| timeout = t; |
| return 0; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static ssize_t fop_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (count) { |
| if (!nowayout) { |
| size_t ofs; |
| |
| /* note: just in case someone wrote the magic character |
| * five months ago... */ |
| wdt_expect_close = 0; |
| |
| /* now scan */ |
| for (ofs = 0; ofs != count; ofs++) { |
| char c; |
| if (get_user(c, buf + ofs)) |
| return -EFAULT; |
| if (c == 'V') |
| wdt_expect_close = 42; |
| } |
| } |
| |
| /* Well, anyhow someone wrote to us, we should |
| return that favour */ |
| wdt_keepalive(); |
| } |
| return count; |
| } |
| |
| static int fop_open(struct inode *inode, struct file *file) |
| { |
| /* Just in case we're already talking to someone... */ |
| if (test_and_set_bit(0, &wdt_is_open)) |
| return -EBUSY; |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| /* Good, fire up the show */ |
| wdt_startup(); |
| return nonseekable_open(inode, file); |
| } |
| |
| static int fop_close(struct inode *inode, struct file *file) |
| { |
| if (wdt_expect_close == 42) |
| wdt_turnoff(); |
| else { |
| pr_crit("Unexpected close, not stopping watchdog!\n"); |
| wdt_keepalive(); |
| } |
| clear_bit(0, &wdt_is_open); |
| wdt_expect_close = 0; |
| return 0; |
| } |
| |
| static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
| | WDIOF_MAGICCLOSE, |
| .firmware_version = 1, |
| .identity = "SC520", |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| case WDIOC_SETOPTIONS: |
| { |
| int new_options, retval = -EINVAL; |
| |
| if (get_user(new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| wdt_turnoff(); |
| retval = 0; |
| } |
| |
| if (new_options & WDIOS_ENABLECARD) { |
| wdt_startup(); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| case WDIOC_KEEPALIVE: |
| wdt_keepalive(); |
| return 0; |
| case WDIOC_SETTIMEOUT: |
| { |
| int new_timeout; |
| |
| if (get_user(new_timeout, p)) |
| return -EFAULT; |
| |
| if (wdt_set_heartbeat(new_timeout)) |
| return -EINVAL; |
| |
| wdt_keepalive(); |
| /* Fall through */ |
| } |
| case WDIOC_GETTIMEOUT: |
| return put_user(timeout, p); |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| static const struct file_operations wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = fop_write, |
| .open = fop_open, |
| .release = fop_close, |
| .unlocked_ioctl = fop_ioctl, |
| }; |
| |
| static struct miscdevice wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &wdt_fops, |
| }; |
| |
| /* |
| * Notifier for system down |
| */ |
| |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| wdt_turnoff(); |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * The WDT needs to learn about soft shutdowns in order to |
| * turn the timebomb registers off. |
| */ |
| |
| static struct notifier_block wdt_notifier = { |
| .notifier_call = wdt_notify_sys, |
| }; |
| |
| static void __exit sc520_wdt_unload(void) |
| { |
| if (!nowayout) |
| wdt_turnoff(); |
| |
| /* Deregister */ |
| misc_deregister(&wdt_miscdev); |
| unregister_reboot_notifier(&wdt_notifier); |
| iounmap(wdtmrctl); |
| } |
| |
| static int __init sc520_wdt_init(void) |
| { |
| int rc = -EBUSY; |
| |
| /* Check that the timeout value is within it's range ; |
| if not reset to the default */ |
| if (wdt_set_heartbeat(timeout)) { |
| wdt_set_heartbeat(WATCHDOG_TIMEOUT); |
| pr_info("timeout value must be 1 <= timeout <= 3600, using %d\n", |
| WATCHDOG_TIMEOUT); |
| } |
| |
| wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2); |
| if (!wdtmrctl) { |
| pr_err("Unable to remap memory\n"); |
| rc = -ENOMEM; |
| goto err_out_region2; |
| } |
| |
| rc = register_reboot_notifier(&wdt_notifier); |
| if (rc) { |
| pr_err("cannot register reboot notifier (err=%d)\n", rc); |
| goto err_out_ioremap; |
| } |
| |
| rc = misc_register(&wdt_miscdev); |
| if (rc) { |
| pr_err("cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, rc); |
| goto err_out_notifier; |
| } |
| |
| pr_info("WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", |
| timeout, nowayout); |
| |
| return 0; |
| |
| err_out_notifier: |
| unregister_reboot_notifier(&wdt_notifier); |
| err_out_ioremap: |
| iounmap(wdtmrctl); |
| err_out_region2: |
| return rc; |
| } |
| |
| module_init(sc520_wdt_init); |
| module_exit(sc520_wdt_unload); |
| |
| MODULE_AUTHOR("Scott and Bill Jennings"); |
| MODULE_DESCRIPTION( |
| "Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor"); |
| MODULE_LICENSE("GPL"); |