| # |
| # USB Multimedia device configuration |
| # |
| comment "USB Multimedia devices" |
| depends on USB |
| |
| config USB_DABUSB |
| tristate "DABUSB driver" |
| depends on USB |
| ---help--- |
| A Digital Audio Broadcasting (DAB) Receiver for USB and Linux |
| brought to you by the DAB-Team |
| <http://wwwbode.cs.tum.edu/Par/arch/dab/>. This driver can be taken |
| as an example for URB-based bulk, control, and isochronous |
| transactions. URB's are explained in |
| <file:Documentation/usb/URB.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dabusb. |
| |
| comment "Video4Linux support is needed for USB Multimedia device support" |
| depends on USB && VIDEO_DEV=n |
| |
| config USB_VICAM |
| tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" |
| depends on USB && VIDEO_DEV && EXPERIMENTAL |
| ---help--- |
| Say Y here if you have 3com homeconnect camera (vicam). |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" (under Multimedia Devices) to use this driver. |
| Information on this API and pointers to "v4l" programs may be found |
| at <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vicam. |
| |
| config USB_DSBR |
| tristate "D-Link USB FM radio support (EXPERIMENTAL)" |
| depends on USB && VIDEO_DEV && EXPERIMENTAL |
| ---help--- |
| Say Y here if you want to connect this type of radio to your |
| computer's USB port. Note that the audio is not digital, and |
| you must connect the line out connector to a sound card or a |
| set of speakers. |
| |
| This driver uses the Video For Linux API. You must enable |
| (Y or M in config) Video For Linux (under Character Devices) |
| to use this driver. Information on this API and pointers to |
| "v4l" programs may be found at |
| <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dsbr100. |
| |
| config USB_ET61X251 |
| tristate "USB ET61X[12]51 PC Camera Controller support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for cameras based on Etoms ET61X151 |
| or ET61X251 PC Camera Controllers. |
| |
| See <file:Documentation/usb/et61x251.txt> for more informations. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" to use this driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called et61x251. |
| |
| config USB_IBMCAM |
| tristate "USB IBM (Xirlink) C-it Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect a IBM "C-It" camera, also known as |
| "Xirlink PC Camera" to your computer's USB port. For more |
| information, read <file:Documentation/usb/ibmcam.txt>. |
| |
| This driver uses the Video For Linux API. You must enable |
| (Y or M in config) Video For Linux (under Character Devices) |
| to use this driver. Information on this API and pointers to |
| "v4l" programs may be found at |
| <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ibmcam. |
| |
| This camera has several configuration options which |
| can be specified when you load the module. Read |
| <file:Documentation/usb/ibmcam.txt> to learn more. |
| |
| config USB_KONICAWC |
| tristate "USB Konica Webcam support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for webcams based on a Konica |
| chipset. This is known to work with the Intel YC76 webcam. |
| |
| This driver uses the Video For Linux API. You must enable |
| (Y or M in config) Video For Linux (under Character Devices) |
| to use this driver. Information on this API and pointers to |
| "v4l" programs may be found at |
| <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called konicawc. |
| |
| config USB_OV511 |
| tristate "USB OV511 Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/usb/ov511.txt> for more |
| information and for a list of supported cameras. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" (under Character Devices) to use this driver. |
| Information on this API and pointers to "v4l" programs may be found |
| at <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ov511. |
| |
| config USB_SE401 |
| tristate "USB SE401 Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/usb/se401.txt> for more |
| information and for a list of supported cameras. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" (under Multimedia Devices) to use this driver. |
| Information on this API and pointers to "v4l" programs may be found |
| at <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called se401. |
| |
| config USB_SN9C102 |
| tristate "USB SN9C10x PC Camera Controller support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for cameras based on SONiX SN9C101, |
| SN9C102 or SN9C103 PC Camera Controllers. |
| |
| See <file:Documentation/usb/sn9c102.txt> for more informations. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" to use this driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sn9c102. |
| |
| config USB_STV680 |
| tristate "USB STV680 (Pencam) Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. This includes the Pencam line of cameras. |
| See <file:Documentation/usb/stv680.txt> for more information and for |
| a list of supported cameras. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" (under Multimedia Devices) to use this driver. |
| Information on this API and pointers to "v4l" programs may be found |
| at <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called stv680. |
| |
| config USB_W9968CF |
| tristate "USB W996[87]CF JPEG Dual Mode Camera support" |
| depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP |
| ---help--- |
| Say Y here if you want support for cameras based on OV681 or |
| Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. |
| |
| This driver has an optional plugin, which is distributed as a |
| separate module only (released under GPL). It allows to use higher |
| resolutions and framerates, but cannot be included in the official |
| Linux kernel for performance purposes. |
| |
| See <file:Documentation/usb/w9968cf.txt> for more informations. |
| |
| This driver uses the Video For Linux and the I2C APIs. It needs the |
| OmniVision Camera Chip support as well. You must say Y or M to |
| "Video For Linux", "I2C Support" and "OmniVision Camera Chip |
| support" to use this driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w9968cf. |
| |
| config USB_PWC |
| tristate "USB Philips Cameras" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y or M here if you want to use one of these Philips & OEM |
| webcams: |
| * Philips PCA645, PCA646 |
| * Philips PCVC675, PCVC680, PCVC690 |
| * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 |
| * Askey VC010 |
| * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' |
| and 'Orbit'/'Sphere' |
| * Samsung MPC-C10, MPC-C30 |
| * Creative Webcam 5, Pro Ex |
| * SOTEC Afina Eye |
| * Visionite VCS-UC300, VCS-UM100 |
| |
| The PCA635, PCVC665 and PCVC720/20 are not supported by this driver |
| and never will be, but the 665 and 720/20 are supported by other |
| drivers. |
| |
| See <file:Documentation/usb/philips.txt> for more information and |
| installation instructions. |
| |
| The built-in microphone is enabled by selecting USB Audio support. |
| |
| This driver uses the Video For Linux API. You must say Y or M to |
| "Video For Linux" (under Character Devices) to use this driver. |
| Information on this API and pointers to "v4l" programs may be found |
| at <file:Documentation/video4linux/API.html>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pwc. |
