| /* |
| * Copyright 2016 Intel Corp. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #ifndef _DRM_VBLANK_H_ |
| #define _DRM_VBLANK_H_ |
| |
| #include <linux/seqlock.h> |
| #include <linux/idr.h> |
| #include <linux/poll.h> |
| |
| #include <drm/drm_file.h> |
| #include <drm/drm_modes.h> |
| |
| struct drm_device; |
| struct drm_crtc; |
| |
| /** |
| * struct drm_pending_vblank_event - pending vblank event tracking |
| */ |
| struct drm_pending_vblank_event { |
| /** |
| * @base: Base structure for tracking pending DRM events. |
| */ |
| struct drm_pending_event base; |
| /** |
| * @pipe: drm_crtc_index() of the &drm_crtc this event is for. |
| */ |
| unsigned int pipe; |
| /** |
| * @sequence: frame event should be triggered at |
| */ |
| u64 sequence; |
| /** |
| * @event: Actual event which will be sent to userspace. |
| */ |
| union { |
| /** |
| * @event.base: DRM event base class. |
| */ |
| struct drm_event base; |
| |
| /** |
| * @event.vbl: |
| * |
| * Event payload for vblank events, requested through |
| * either the MODE_PAGE_FLIP or MODE_ATOMIC IOCTL. Also |
| * generated by the legacy WAIT_VBLANK IOCTL, but new userspace |
| * should use MODE_QUEUE_SEQUENCE and &event.seq instead. |
| */ |
| struct drm_event_vblank vbl; |
| |
| /** |
| * @event.seq: Event payload for the MODE_QUEUEU_SEQUENCE IOCTL. |
| */ |
| struct drm_event_crtc_sequence seq; |
| } event; |
| }; |
| |
| /** |
| * struct drm_vblank_crtc - vblank tracking for a CRTC |
| * |
| * This structure tracks the vblank state for one CRTC. |
| * |
| * Note that for historical reasons - the vblank handling code is still shared |
| * with legacy/non-kms drivers - this is a free-standing structure not directly |
| * connected to &struct drm_crtc. But all public interface functions are taking |
| * a &struct drm_crtc to hide this implementation detail. |
| */ |
| struct drm_vblank_crtc { |
| /** |
| * @dev: Pointer to the &drm_device. |
| */ |
| struct drm_device *dev; |
| /** |
| * @queue: Wait queue for vblank waiters. |
| */ |
| wait_queue_head_t queue; |
| /** |
| * @disable_timer: Disable timer for the delayed vblank disabling |
| * hysteresis logic. Vblank disabling is controlled through the |
| * drm_vblank_offdelay module option and the setting of the |
| * &drm_device.max_vblank_count value. |
| */ |
| struct timer_list disable_timer; |
| |
| /** |
| * @seqlock: Protect vblank count and time. |
| */ |
| seqlock_t seqlock; |
| |
| /** |
| * @count: Current software vblank counter. |
| */ |
| u64 count; |
| /** |
| * @time: Vblank timestamp corresponding to @count. |
| */ |
| ktime_t time; |
| |
| /** |
| * @refcount: Number of users/waiters of the vblank interrupt. Only when |
| * this refcount reaches 0 can the hardware interrupt be disabled using |
| * @disable_timer. |
| */ |
| atomic_t refcount; |
| /** |
| * @last: Protected by &drm_device.vbl_lock, used for wraparound handling. |
| */ |
| u32 last; |
| /** |
| * @max_vblank_count: |
| * |
| * Maximum value of the vblank registers for this crtc. This value +1 |
| * will result in a wrap-around of the vblank register. It is used |
| * by the vblank core to handle wrap-arounds. |
| * |
| * If set to zero the vblank core will try to guess the elapsed vblanks |
| * between times when the vblank interrupt is disabled through |
| * high-precision timestamps. That approach is suffering from small |
| * races and imprecision over longer time periods, hence exposing a |
| * hardware vblank counter is always recommended. |
| * |
| * This is the runtime configurable per-crtc maximum set through |
| * drm_crtc_set_max_vblank_count(). If this is used the driver |
| * must leave the device wide &drm_device.max_vblank_count at zero. |
| * |
| * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set. |
| */ |
| u32 max_vblank_count; |
| /** |
| * @inmodeset: Tracks whether the vblank is disabled due to a modeset. |
| * For legacy driver bit 2 additionally tracks whether an additional |
| * temporary vblank reference has been acquired to paper over the |
| * hardware counter resetting/jumping. KMS drivers should instead just |
| * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly |
| * save and restore the vblank count. |
| */ |
| unsigned int inmodeset; |
| /** |
| * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this |
| * structure. |
| */ |
| unsigned int pipe; |
| /** |
| * @framedur_ns: Frame/Field duration in ns, used by |
| * drm_calc_vbltimestamp_from_scanoutpos() and computed by |
| * drm_calc_timestamping_constants(). |
| */ |
| int framedur_ns; |
| /** |
| * @linedur_ns: Line duration in ns, used by |
| * drm_calc_vbltimestamp_from_scanoutpos() and computed by |
| * drm_calc_timestamping_constants(). |
| */ |
| int linedur_ns; |
| |
| /** |
| * @hwmode: |
| * |
| * Cache of the current hardware display mode. Only valid when @enabled |
| * is set. This is used by helpers like |
| * drm_calc_vbltimestamp_from_scanoutpos(). We can't just access the |
| * hardware mode by e.g. looking at &drm_crtc_state.adjusted_mode, |
| * because that one is really hard to get from interrupt context. |
| */ |
| struct drm_display_mode hwmode; |
| |
| /** |
| * @enabled: Tracks the enabling state of the corresponding &drm_crtc to |
| * avoid double-disabling and hence corrupting saved state. Needed by |
| * drivers not using atomic KMS, since those might go through their CRTC |
| * disabling functions multiple times. |
| */ |
| bool enabled; |
| }; |
| |
| int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs); |
| bool drm_dev_has_vblank(const struct drm_device *dev); |
| u64 drm_crtc_vblank_count(struct drm_crtc *crtc); |
| u64 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc, |
| ktime_t *vblanktime); |
| void drm_crtc_send_vblank_event(struct drm_crtc *crtc, |
| struct drm_pending_vblank_event *e); |
| void drm_crtc_arm_vblank_event(struct drm_crtc *crtc, |
| struct drm_pending_vblank_event *e); |
| void drm_vblank_set_event(struct drm_pending_vblank_event *e, |
| u64 *seq, |
| ktime_t *now); |
| bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe); |
| bool drm_crtc_handle_vblank(struct drm_crtc *crtc); |
| int drm_crtc_vblank_get(struct drm_crtc *crtc); |
| void drm_crtc_vblank_put(struct drm_crtc *crtc); |
| void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe); |
| void drm_crtc_wait_one_vblank(struct drm_crtc *crtc); |
| void drm_crtc_vblank_off(struct drm_crtc *crtc); |
| void drm_crtc_vblank_reset(struct drm_crtc *crtc); |
| void drm_crtc_vblank_on(struct drm_crtc *crtc); |
| u64 drm_crtc_accurate_vblank_count(struct drm_crtc *crtc); |
| void drm_vblank_restore(struct drm_device *dev, unsigned int pipe); |
| void drm_crtc_vblank_restore(struct drm_crtc *crtc); |
| |
| bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, |
| unsigned int pipe, int *max_error, |
| ktime_t *vblank_time, |
| bool in_vblank_irq); |
| void drm_calc_timestamping_constants(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode); |
| wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc); |
| void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc, |
| u32 max_vblank_count); |
| #endif |