| /* |
| * TI LP8860 4-Channel LED Driver |
| * |
| * Copyright (C) 2014 Texas Instruments |
| * |
| * Author: Dan Murphy <dmurphy@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/leds.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/slab.h> |
| #include <uapi/linux/uleds.h> |
| |
| #define LP8860_DISP_CL1_BRT_MSB 0x00 |
| #define LP8860_DISP_CL1_BRT_LSB 0x01 |
| #define LP8860_DISP_CL1_CURR_MSB 0x02 |
| #define LP8860_DISP_CL1_CURR_LSB 0x03 |
| #define LP8860_CL2_BRT_MSB 0x04 |
| #define LP8860_CL2_BRT_LSB 0x05 |
| #define LP8860_CL2_CURRENT 0x06 |
| #define LP8860_CL3_BRT_MSB 0x07 |
| #define LP8860_CL3_BRT_LSB 0x08 |
| #define LP8860_CL3_CURRENT 0x09 |
| #define LP8860_CL4_BRT_MSB 0x0a |
| #define LP8860_CL4_BRT_LSB 0x0b |
| #define LP8860_CL4_CURRENT 0x0c |
| #define LP8860_CONFIG 0x0d |
| #define LP8860_STATUS 0x0e |
| #define LP8860_FAULT 0x0f |
| #define LP8860_LED_FAULT 0x10 |
| #define LP8860_FAULT_CLEAR 0x11 |
| #define LP8860_ID 0x12 |
| #define LP8860_TEMP_MSB 0x13 |
| #define LP8860_TEMP_LSB 0x14 |
| #define LP8860_DISP_LED_CURR_MSB 0x15 |
| #define LP8860_DISP_LED_CURR_LSB 0x16 |
| #define LP8860_DISP_LED_PWM_MSB 0x17 |
| #define LP8860_DISP_LED_PWM_LSB 0x18 |
| #define LP8860_EEPROM_CNTRL 0x19 |
| #define LP8860_EEPROM_UNLOCK 0x1a |
| |
| #define LP8860_EEPROM_REG_0 0x60 |
| #define LP8860_EEPROM_REG_1 0x61 |
| #define LP8860_EEPROM_REG_2 0x62 |
| #define LP8860_EEPROM_REG_3 0x63 |
| #define LP8860_EEPROM_REG_4 0x64 |
| #define LP8860_EEPROM_REG_5 0x65 |
| #define LP8860_EEPROM_REG_6 0x66 |
| #define LP8860_EEPROM_REG_7 0x67 |
| #define LP8860_EEPROM_REG_8 0x68 |
| #define LP8860_EEPROM_REG_9 0x69 |
| #define LP8860_EEPROM_REG_10 0x6a |
| #define LP8860_EEPROM_REG_11 0x6b |
| #define LP8860_EEPROM_REG_12 0x6c |
| #define LP8860_EEPROM_REG_13 0x6d |
| #define LP8860_EEPROM_REG_14 0x6e |
| #define LP8860_EEPROM_REG_15 0x6f |
| #define LP8860_EEPROM_REG_16 0x70 |
| #define LP8860_EEPROM_REG_17 0x71 |
| #define LP8860_EEPROM_REG_18 0x72 |
| #define LP8860_EEPROM_REG_19 0x73 |
| #define LP8860_EEPROM_REG_20 0x74 |
| #define LP8860_EEPROM_REG_21 0x75 |
| #define LP8860_EEPROM_REG_22 0x76 |
| #define LP8860_EEPROM_REG_23 0x77 |
| #define LP8860_EEPROM_REG_24 0x78 |
| |
| #define LP8860_LOCK_EEPROM 0x00 |
| #define LP8860_UNLOCK_EEPROM 0x01 |
| #define LP8860_PROGRAM_EEPROM 0x02 |
| #define LP8860_EEPROM_CODE_1 0x08 |
| #define LP8860_EEPROM_CODE_2 0xba |
| #define LP8860_EEPROM_CODE_3 0xef |
| |
| #define LP8860_CLEAR_FAULTS 0x01 |
| |
| /** |
| * struct lp8860_led - |
| * @lock - Lock for reading/writing the device |
| * @client - Pointer to the I2C client |
| * @led_dev - led class device pointer |
| * @regmap - Devices register map |
| * @eeprom_regmap - EEPROM register map |
| * @enable_gpio - VDDIO/EN gpio to enable communication interface |
| * @regulator - LED supply regulator pointer |
| * @label - LED label |
| */ |
| struct lp8860_led { |
| struct mutex lock; |
| struct i2c_client *client; |
| struct led_classdev led_dev; |
| struct regmap *regmap; |
| struct regmap *eeprom_regmap; |
| struct gpio_desc *enable_gpio; |
| struct regulator *regulator; |
| char label[LED_MAX_NAME_SIZE]; |
| }; |
| |
| struct lp8860_eeprom_reg { |
| uint8_t reg; |
| uint8_t value; |
| }; |
| |
| static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { |
| { LP8860_EEPROM_REG_0, 0xed }, |
| { LP8860_EEPROM_REG_1, 0xdf }, |
| { LP8860_EEPROM_REG_2, 0xdc }, |
| { LP8860_EEPROM_REG_3, 0xf0 }, |
| { LP8860_EEPROM_REG_4, 0xdf }, |
| { LP8860_EEPROM_REG_5, 0xe5 }, |
| { LP8860_EEPROM_REG_6, 0xf2 }, |
| { LP8860_EEPROM_REG_7, 0x77 }, |
| { LP8860_EEPROM_REG_8, 0x77 }, |
| { LP8860_EEPROM_REG_9, 0x71 }, |
| { LP8860_EEPROM_REG_10, 0x3f }, |
| { LP8860_EEPROM_REG_11, 0xb7 }, |
| { LP8860_EEPROM_REG_12, 0x17 }, |
| { LP8860_EEPROM_REG_13, 0xef }, |
| { LP8860_EEPROM_REG_14, 0xb0 }, |
| { LP8860_EEPROM_REG_15, 0x87 }, |
| { LP8860_EEPROM_REG_16, 0xce }, |
| { LP8860_EEPROM_REG_17, 0x72 }, |
| { LP8860_EEPROM_REG_18, 0xe5 }, |
| { LP8860_EEPROM_REG_19, 0xdf }, |
| { LP8860_EEPROM_REG_20, 0x35 }, |
| { LP8860_EEPROM_REG_21, 0x06 }, |
| { LP8860_EEPROM_REG_22, 0xdc }, |
| { LP8860_EEPROM_REG_23, 0x88 }, |
| { LP8860_EEPROM_REG_24, 0x3E }, |
| }; |
| |
| static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) |
| { |
| int ret; |
| |
| mutex_lock(&led->lock); |
| |
| if (lock == LP8860_UNLOCK_EEPROM) { |
| ret = regmap_write(led->regmap, |
| LP8860_EEPROM_UNLOCK, |
| LP8860_EEPROM_CODE_1); |
| if (ret) { |
| dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| goto out; |
| } |
| |
| ret = regmap_write(led->regmap, |
| LP8860_EEPROM_UNLOCK, |
| LP8860_EEPROM_CODE_2); |
| if (ret) { |
| dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| goto out; |
| } |
| ret = regmap_write(led->regmap, |
| LP8860_EEPROM_UNLOCK, |
| LP8860_EEPROM_CODE_3); |
| if (ret) { |
| dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| goto out; |
| } |
| } else { |
| ret = regmap_write(led->regmap, |
| LP8860_EEPROM_UNLOCK, |
| LP8860_LOCK_EEPROM); |
| } |
| |
| out: |
| mutex_unlock(&led->lock); |
| return ret; |
| } |
| |
| static int lp8860_fault_check(struct lp8860_led *led) |
| { |
| int ret, fault; |
| unsigned int read_buf; |
| |
| ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); |
| if (ret) |
| goto out; |
| |
| fault = read_buf; |
| |
| ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); |
| if (ret) |
| goto out; |
| |
| fault |= read_buf; |
| |
| /* Attempt to clear any faults */ |
| if (fault) |
| ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, |
| LP8860_CLEAR_FAULTS); |
| out: |
| return ret; |
| } |
| |
| static int lp8860_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brt_val) |
| { |
| struct lp8860_led *led = |
| container_of(led_cdev, struct lp8860_led, led_dev); |
| int disp_brightness = brt_val * 255; |
| int ret; |
| |
| mutex_lock(&led->lock); |
| |
| ret = lp8860_fault_check(led); |
| if (ret) { |
| dev_err(&led->client->dev, "Cannot read/clear faults\n"); |
| goto out; |
| } |
| |
| ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, |
| (disp_brightness & 0xff00) >> 8); |
| if (ret) { |
| dev_err(&led->client->dev, "Cannot write CL1 MSB\n"); |
| goto out; |
| } |
| |
| ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, |
| disp_brightness & 0xff); |
| if (ret) { |
| dev_err(&led->client->dev, "Cannot write CL1 LSB\n"); |
| goto out; |
| } |
| out: |
| mutex_unlock(&led->lock); |
| return ret; |
| } |
| |
| static int lp8860_init(struct lp8860_led *led) |
| { |
| unsigned int read_buf; |
| int ret, i, reg_count; |
| |
| if (led->regulator) { |
| ret = regulator_enable(led->regulator); |
| if (ret) { |
| dev_err(&led->client->dev, |
| "Failed to enable regulator\n"); |
| return ret; |
| } |
| } |
| |
| if (led->enable_gpio) |
| gpiod_direction_output(led->enable_gpio, 1); |
| |
| ret = lp8860_fault_check(led); |
| if (ret) |
| goto out; |
| |
| ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); |
| if (ret) |
| goto out; |
| |
| ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); |
| if (ret) { |
| dev_err(&led->client->dev, "Failed unlocking EEPROM\n"); |
| goto out; |
| } |
| |
| reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); |
| for (i = 0; i < reg_count; i++) { |
| ret = regmap_write(led->eeprom_regmap, |
| lp8860_eeprom_disp_regs[i].reg, |
| lp8860_eeprom_disp_regs[i].value); |
| if (ret) { |
| dev_err(&led->client->dev, "Failed writing EEPROM\n"); |
| goto out; |
| } |
| } |
| |
| ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); |
| if (ret) |
| goto out; |
| |
| ret = regmap_write(led->regmap, |
| LP8860_EEPROM_CNTRL, |
| LP8860_PROGRAM_EEPROM); |
| if (ret) { |
| dev_err(&led->client->dev, "Failed programming EEPROM\n"); |
| goto out; |
| } |
| |
| return ret; |
| |
| out: |
| if (ret) |
| if (led->enable_gpio) |
| gpiod_direction_output(led->enable_gpio, 0); |
| |
| if (led->regulator) { |
| ret = regulator_disable(led->regulator); |
| if (ret) |
| dev_err(&led->client->dev, |
| "Failed to disable regulator\n"); |
| } |
| |
| return ret; |
| } |
| |
| static const struct reg_default lp8860_reg_defs[] = { |
| { LP8860_DISP_CL1_BRT_MSB, 0x00}, |
| { LP8860_DISP_CL1_BRT_LSB, 0x00}, |
| { LP8860_DISP_CL1_CURR_MSB, 0x00}, |
| { LP8860_DISP_CL1_CURR_LSB, 0x00}, |
| { LP8860_CL2_BRT_MSB, 0x00}, |
| { LP8860_CL2_BRT_LSB, 0x00}, |
| { LP8860_CL2_CURRENT, 0x00}, |
| { LP8860_CL3_BRT_MSB, 0x00}, |
| { LP8860_CL3_BRT_LSB, 0x00}, |
| { LP8860_CL3_CURRENT, 0x00}, |
| { LP8860_CL4_BRT_MSB, 0x00}, |
| { LP8860_CL4_BRT_LSB, 0x00}, |
| { LP8860_CL4_CURRENT, 0x00}, |
| { LP8860_CONFIG, 0x00}, |
| { LP8860_FAULT_CLEAR, 0x00}, |
| { LP8860_EEPROM_CNTRL, 0x80}, |
| { LP8860_EEPROM_UNLOCK, 0x00}, |
| }; |
| |
| static const struct regmap_config lp8860_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LP8860_EEPROM_UNLOCK, |
| .reg_defaults = lp8860_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static const struct reg_default lp8860_eeprom_defs[] = { |
| { LP8860_EEPROM_REG_0, 0x00 }, |
| { LP8860_EEPROM_REG_1, 0x00 }, |
| { LP8860_EEPROM_REG_2, 0x00 }, |
| { LP8860_EEPROM_REG_3, 0x00 }, |
| { LP8860_EEPROM_REG_4, 0x00 }, |
| { LP8860_EEPROM_REG_5, 0x00 }, |
| { LP8860_EEPROM_REG_6, 0x00 }, |
| { LP8860_EEPROM_REG_7, 0x00 }, |
| { LP8860_EEPROM_REG_8, 0x00 }, |
| { LP8860_EEPROM_REG_9, 0x00 }, |
| { LP8860_EEPROM_REG_10, 0x00 }, |
| { LP8860_EEPROM_REG_11, 0x00 }, |
| { LP8860_EEPROM_REG_12, 0x00 }, |
| { LP8860_EEPROM_REG_13, 0x00 }, |
| { LP8860_EEPROM_REG_14, 0x00 }, |
| { LP8860_EEPROM_REG_15, 0x00 }, |
| { LP8860_EEPROM_REG_16, 0x00 }, |
| { LP8860_EEPROM_REG_17, 0x00 }, |
| { LP8860_EEPROM_REG_18, 0x00 }, |
| { LP8860_EEPROM_REG_19, 0x00 }, |
| { LP8860_EEPROM_REG_20, 0x00 }, |
| { LP8860_EEPROM_REG_21, 0x00 }, |
| { LP8860_EEPROM_REG_22, 0x00 }, |
| { LP8860_EEPROM_REG_23, 0x00 }, |
| { LP8860_EEPROM_REG_24, 0x00 }, |
| }; |
| |
| static const struct regmap_config lp8860_eeprom_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LP8860_EEPROM_REG_24, |
| .reg_defaults = lp8860_eeprom_defs, |
| .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static int lp8860_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| struct lp8860_led *led; |
| struct device_node *np = client->dev.of_node; |
| struct device_node *child_node; |
| const char *name; |
| |
| led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| for_each_available_child_of_node(np, child_node) { |
| led->led_dev.default_trigger = of_get_property(child_node, |
| "linux,default-trigger", |
| NULL); |
| |
| ret = of_property_read_string(child_node, "label", &name); |
| if (!ret) |
| snprintf(led->label, sizeof(led->label), "%s:%s", |
| id->name, name); |
| else |
| snprintf(led->label, sizeof(led->label), |
| "%s::display_cluster", id->name); |
| } |
| |
| led->enable_gpio = devm_gpiod_get_optional(&client->dev, |
| "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(led->enable_gpio)) { |
| ret = PTR_ERR(led->enable_gpio); |
| dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); |
| return ret; |
| } |
| |
| led->regulator = devm_regulator_get(&client->dev, "vled"); |
| if (IS_ERR(led->regulator)) |
| led->regulator = NULL; |
| |
| led->client = client; |
| led->led_dev.name = led->label; |
| led->led_dev.brightness_set_blocking = lp8860_brightness_set; |
| |
| mutex_init(&led->lock); |
| |
| i2c_set_clientdata(client, led); |
| |
| led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); |
| if (IS_ERR(led->regmap)) { |
| ret = PTR_ERR(led->regmap); |
| dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); |
| if (IS_ERR(led->eeprom_regmap)) { |
| ret = PTR_ERR(led->eeprom_regmap); |
| dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = lp8860_init(led); |
| if (ret) |
| return ret; |
| |
| ret = devm_led_classdev_register(&client->dev, &led->led_dev); |
| if (ret) { |
| dev_err(&client->dev, "led register err: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int lp8860_remove(struct i2c_client *client) |
| { |
| struct lp8860_led *led = i2c_get_clientdata(client); |
| int ret; |
| |
| if (led->enable_gpio) |
| gpiod_direction_output(led->enable_gpio, 0); |
| |
| if (led->regulator) { |
| ret = regulator_disable(led->regulator); |
| if (ret) |
| dev_err(&led->client->dev, |
| "Failed to disable regulator\n"); |
| } |
| |
| mutex_destroy(&led->lock); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp8860_id[] = { |
| { "lp8860", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp8860_id); |
| |
| static const struct of_device_id of_lp8860_leds_match[] = { |
| { .compatible = "ti,lp8860", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); |
| |
| static struct i2c_driver lp8860_driver = { |
| .driver = { |
| .name = "lp8860", |
| .of_match_table = of_lp8860_leds_match, |
| }, |
| .probe = lp8860_probe, |
| .remove = lp8860_remove, |
| .id_table = lp8860_id, |
| }; |
| module_i2c_driver(lp8860_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver"); |
| MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |