| /*====================================================================== |
| |
| A Sedlbauer PCMCIA client driver |
| |
| This driver is for the Sedlbauer Speed Star and Speed Star II, |
| which are ISDN PCMCIA Cards. |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is David A. Hinds |
| <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| |
| Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann |
| <maniemann@users.sourceforge.net>. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU General Public License version 2 (the "GPL"), in |
| which case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| ======================================================================*/ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <asm/io.h> |
| |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| #include "hisax_cfg.h" |
| |
| MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards"); |
| MODULE_AUTHOR("Marcus Niemann"); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| static int protocol = 2; /* EURO-ISDN Default */ |
| module_param(protocol, int, 0); |
| |
| static int sedlbauer_config(struct pcmcia_device *link); |
| static void sedlbauer_release(struct pcmcia_device *link); |
| |
| static void sedlbauer_detach(struct pcmcia_device *p_dev); |
| |
| typedef struct local_info_t { |
| struct pcmcia_device *p_dev; |
| int stop; |
| int cardnr; |
| } local_info_t; |
| |
| static int sedlbauer_probe(struct pcmcia_device *link) |
| { |
| local_info_t *local; |
| |
| dev_dbg(&link->dev, "sedlbauer_attach()\n"); |
| |
| /* Allocate space for private device-specific data */ |
| local = kzalloc(sizeof(local_info_t), GFP_KERNEL); |
| if (!local) return -ENOMEM; |
| local->cardnr = -1; |
| |
| local->p_dev = link; |
| link->priv = local; |
| |
| return sedlbauer_config(link); |
| } /* sedlbauer_attach */ |
| |
| static void sedlbauer_detach(struct pcmcia_device *link) |
| { |
| dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link); |
| |
| ((local_info_t *)link->priv)->stop = 1; |
| sedlbauer_release(link); |
| |
| /* This points to the parent local_info_t struct */ |
| kfree(link->priv); |
| } /* sedlbauer_detach */ |
| |
| static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) |
| { |
| if (p_dev->config_index == 0) |
| return -EINVAL; |
| |
| p_dev->io_lines = 3; |
| return pcmcia_request_io(p_dev); |
| } |
| |
| static int sedlbauer_config(struct pcmcia_device *link) |
| { |
| int ret; |
| IsdnCard_t icard; |
| |
| dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link); |
| |
| link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | |
| CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; |
| |
| ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL); |
| if (ret) |
| goto failed; |
| |
| ret = pcmcia_enable_device(link); |
| if (ret) |
| goto failed; |
| |
| icard.para[0] = link->irq; |
| icard.para[1] = link->resource[0]->start; |
| icard.protocol = protocol; |
| icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA; |
| |
| ret = hisax_init_pcmcia(link, |
| &(((local_info_t *)link->priv)->stop), &icard); |
| if (ret < 0) { |
| printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n", |
| ret, link->resource[0]); |
| sedlbauer_release(link); |
| return -ENODEV; |
| } else |
| ((local_info_t *)link->priv)->cardnr = ret; |
| |
| return 0; |
| |
| failed: |
| sedlbauer_release(link); |
| return -ENODEV; |
| |
| } /* sedlbauer_config */ |
| |
| static void sedlbauer_release(struct pcmcia_device *link) |
| { |
| local_info_t *local = link->priv; |
| dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link); |
| |
| if (local) { |
| if (local->cardnr >= 0) { |
| /* no unregister function with hisax */ |
| HiSax_closecard(local->cardnr); |
| } |
| } |
| |
| pcmcia_disable_device(link); |
| } /* sedlbauer_release */ |
| |
| static int sedlbauer_suspend(struct pcmcia_device *link) |
| { |
| local_info_t *dev = link->priv; |
| |
| dev->stop = 1; |
| |
| return 0; |
| } |
| |
| static int sedlbauer_resume(struct pcmcia_device *link) |
| { |
| local_info_t *dev = link->priv; |
| |
| dev->stop = 0; |
| |
| return 0; |
| } |
| |
| |
| static const struct pcmcia_device_id sedlbauer_ids[] = { |
| PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a), |
| PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90), |
| PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce), |
| PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe), |
| PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c), |
| PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae), |
| /* PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), */ /* too generic*/ |
| PCMCIA_DEVICE_NULL |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids); |
| |
| static struct pcmcia_driver sedlbauer_driver = { |
| .owner = THIS_MODULE, |
| .name = "sedlbauer_cs", |
| .probe = sedlbauer_probe, |
| .remove = sedlbauer_detach, |
| .id_table = sedlbauer_ids, |
| .suspend = sedlbauer_suspend, |
| .resume = sedlbauer_resume, |
| }; |
| module_pcmcia_driver(sedlbauer_driver); |