| /* |
| * User address space access functions. |
| * |
| * Copyright 1997 Andi Kleen <ak@muc.de> |
| * Copyright 1997 Linus Torvalds |
| * Copyright 2002 Andi Kleen <ak@suse.de> |
| */ |
| #include <linux/export.h> |
| #include <linux/uaccess.h> |
| #include <linux/highmem.h> |
| |
| /* |
| * Zero Userspace |
| */ |
| |
| unsigned long __clear_user(void __user *addr, unsigned long size) |
| { |
| long __d0; |
| might_fault(); |
| /* no memory constraint because it doesn't change any memory gcc knows |
| about */ |
| stac(); |
| asm volatile( |
| " testq %[size8],%[size8]\n" |
| " jz 4f\n" |
| "0: movq $0,(%[dst])\n" |
| " addq $8,%[dst]\n" |
| " decl %%ecx ; jnz 0b\n" |
| "4: movq %[size1],%%rcx\n" |
| " testl %%ecx,%%ecx\n" |
| " jz 2f\n" |
| "1: movb $0,(%[dst])\n" |
| " incq %[dst]\n" |
| " decl %%ecx ; jnz 1b\n" |
| "2:\n" |
| ".section .fixup,\"ax\"\n" |
| "3: lea 0(%[size1],%[size8],8),%[size8]\n" |
| " jmp 2b\n" |
| ".previous\n" |
| _ASM_EXTABLE(0b,3b) |
| _ASM_EXTABLE(1b,2b) |
| : [size8] "=&c"(size), [dst] "=&D" (__d0) |
| : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr)); |
| clac(); |
| return size; |
| } |
| EXPORT_SYMBOL(__clear_user); |
| |
| unsigned long clear_user(void __user *to, unsigned long n) |
| { |
| if (access_ok(VERIFY_WRITE, to, n)) |
| return __clear_user(to, n); |
| return n; |
| } |
| EXPORT_SYMBOL(clear_user); |
| |
| /* |
| * Try to copy last bytes and clear the rest if needed. |
| * Since protection fault in copy_from/to_user is not a normal situation, |
| * it is not necessary to optimize tail handling. |
| */ |
| __visible unsigned long |
| copy_user_handle_tail(char *to, char *from, unsigned len) |
| { |
| for (; len; --len, to++) { |
| char c; |
| |
| if (__get_user_nocheck(c, from++, sizeof(char))) |
| break; |
| if (__put_user_nocheck(c, to, sizeof(char))) |
| break; |
| } |
| clac(); |
| return len; |
| } |
| |
| /* |
| * Similar to copy_user_handle_tail, probe for the write fault point, |
| * but reuse __memcpy_mcsafe in case a new read error is encountered. |
| * clac() is handled in _copy_to_iter_mcsafe(). |
| */ |
| __visible unsigned long |
| mcsafe_handle_tail(char *to, char *from, unsigned len) |
| { |
| for (; len; --len, to++, from++) { |
| /* |
| * Call the assembly routine back directly since |
| * memcpy_mcsafe() may silently fallback to memcpy. |
| */ |
| unsigned long rem = __memcpy_mcsafe(to, from, 1); |
| |
| if (rem) |
| break; |
| } |
| return len; |
| } |
| |
| #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE |
| /** |
| * clean_cache_range - write back a cache range with CLWB |
| * @vaddr: virtual start address |
| * @size: number of bytes to write back |
| * |
| * Write back a cache range using the CLWB (cache line write back) |
| * instruction. Note that @size is internally rounded up to be cache |
| * line size aligned. |
| */ |
| static void clean_cache_range(void *addr, size_t size) |
| { |
| u16 x86_clflush_size = boot_cpu_data.x86_clflush_size; |
| unsigned long clflush_mask = x86_clflush_size - 1; |
| void *vend = addr + size; |
| void *p; |
| |
| for (p = (void *)((unsigned long)addr & ~clflush_mask); |
| p < vend; p += x86_clflush_size) |
| clwb(p); |
| } |
| |
| void arch_wb_cache_pmem(void *addr, size_t size) |
| { |
| clean_cache_range(addr, size); |
| } |
| EXPORT_SYMBOL_GPL(arch_wb_cache_pmem); |
| |
| long __copy_user_flushcache(void *dst, const void __user *src, unsigned size) |
| { |
| unsigned long flushed, dest = (unsigned long) dst; |
| long rc = __copy_user_nocache(dst, src, size, 0); |
| |
| /* |
| * __copy_user_nocache() uses non-temporal stores for the bulk |
| * of the transfer, but we need to manually flush if the |
| * transfer is unaligned. A cached memory copy is used when |
| * destination or size is not naturally aligned. That is: |
| * - Require 8-byte alignment when size is 8 bytes or larger. |
| * - Require 4-byte alignment when size is 4 bytes. |
| */ |
| if (size < 8) { |
| if (!IS_ALIGNED(dest, 4) || size != 4) |
| clean_cache_range(dst, 1); |
| } else { |
| if (!IS_ALIGNED(dest, 8)) { |
| dest = ALIGN(dest, boot_cpu_data.x86_clflush_size); |
| clean_cache_range(dst, 1); |
| } |
| |
| flushed = dest - (unsigned long) dst; |
| if (size > flushed && !IS_ALIGNED(size - flushed, 8)) |
| clean_cache_range(dst + size - 1, 1); |
| } |
| |
| return rc; |
| } |
| |
| void memcpy_flushcache(void *_dst, const void *_src, size_t size) |
| { |
| unsigned long dest = (unsigned long) _dst; |
| unsigned long source = (unsigned long) _src; |
| |
| /* cache copy and flush to align dest */ |
| if (!IS_ALIGNED(dest, 8)) { |
| unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest); |
| |
| memcpy((void *) dest, (void *) source, len); |
| clean_cache_range((void *) dest, len); |
| dest += len; |
| source += len; |
| size -= len; |
| if (!size) |
| return; |
| } |
| |
| /* 4x8 movnti loop */ |
| while (size >= 32) { |
| asm("movq (%0), %%r8\n" |
| "movq 8(%0), %%r9\n" |
| "movq 16(%0), %%r10\n" |
| "movq 24(%0), %%r11\n" |
| "movnti %%r8, (%1)\n" |
| "movnti %%r9, 8(%1)\n" |
| "movnti %%r10, 16(%1)\n" |
| "movnti %%r11, 24(%1)\n" |
| :: "r" (source), "r" (dest) |
| : "memory", "r8", "r9", "r10", "r11"); |
| dest += 32; |
| source += 32; |
| size -= 32; |
| } |
| |
| /* 1x8 movnti loop */ |
| while (size >= 8) { |
| asm("movq (%0), %%r8\n" |
| "movnti %%r8, (%1)\n" |
| :: "r" (source), "r" (dest) |
| : "memory", "r8"); |
| dest += 8; |
| source += 8; |
| size -= 8; |
| } |
| |
| /* 1x4 movnti loop */ |
| while (size >= 4) { |
| asm("movl (%0), %%r8d\n" |
| "movnti %%r8d, (%1)\n" |
| :: "r" (source), "r" (dest) |
| : "memory", "r8"); |
| dest += 4; |
| source += 4; |
| size -= 4; |
| } |
| |
| /* cache copy for remaining bytes */ |
| if (size) { |
| memcpy((void *) dest, (void *) source, size); |
| clean_cache_range((void *) dest, size); |
| } |
| } |
| EXPORT_SYMBOL_GPL(memcpy_flushcache); |
| |
| void memcpy_page_flushcache(char *to, struct page *page, size_t offset, |
| size_t len) |
| { |
| char *from = kmap_atomic(page); |
| |
| memcpy_flushcache(to, from + offset, len); |
| kunmap_atomic(from); |
| } |
| #endif |