| /* |
| * ddbridge-regs.h: Digital Devices PCIe bridge driver |
| * |
| * Copyright (C) 2010-2017 Digital Devices GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 only, as published by the Free Software Foundation. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * To obtain the license, point your browser to |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #ifndef __DDBRIDGE_REGS_H__ |
| #define __DDBRIDGE_REGS_H__ |
| |
| /* ------------------------------------------------------------------------- */ |
| /* SPI Controller */ |
| |
| #define SPI_CONTROL 0x10 |
| #define SPI_DATA 0x14 |
| |
| /* ------------------------------------------------------------------------- */ |
| /* GPIO */ |
| |
| #define GPIO_OUTPUT 0x20 |
| #define GPIO_INPUT 0x24 |
| #define GPIO_DIRECTION 0x28 |
| |
| /* ------------------------------------------------------------------------- */ |
| /* MDIO */ |
| |
| #define MDIO_CTRL 0x20 |
| #define MDIO_ADR 0x24 |
| #define MDIO_REG 0x28 |
| #define MDIO_VAL 0x2C |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #define BOARD_CONTROL 0x30 |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Interrupt controller |
| * How many MSI's are available depends on HW (Min 2 max 8) |
| * How many are usable also depends on Host platform |
| */ |
| |
| #define INTERRUPT_BASE (0x40) |
| |
| #define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00) |
| #define MSI1_ENABLE (INTERRUPT_BASE + 0x04) |
| #define MSI2_ENABLE (INTERRUPT_BASE + 0x08) |
| #define MSI3_ENABLE (INTERRUPT_BASE + 0x0C) |
| #define MSI4_ENABLE (INTERRUPT_BASE + 0x10) |
| #define MSI5_ENABLE (INTERRUPT_BASE + 0x14) |
| #define MSI6_ENABLE (INTERRUPT_BASE + 0x18) |
| #define MSI7_ENABLE (INTERRUPT_BASE + 0x1C) |
| |
| #define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20) |
| #define INTERRUPT_ACK (INTERRUPT_BASE + 0x20) |
| |
| /* Temperature Monitor ( 2x LM75A @ 0x90,0x92 I2c ) */ |
| #define TEMPMON_BASE (0x1c0) |
| #define TEMPMON_CONTROL (TEMPMON_BASE + 0x00) |
| |
| #define TEMPMON_CONTROL_AUTOSCAN (0x00000002) |
| #define TEMPMON_CONTROL_INTENABLE (0x00000004) |
| #define TEMPMON_CONTROL_OVERTEMP (0x00008000) |
| |
| /* SHORT Temperature in Celsius x 256 */ |
| #define TEMPMON_SENSOR0 (TEMPMON_BASE + 0x04) |
| #define TEMPMON_SENSOR1 (TEMPMON_BASE + 0x08) |
| |
| #define TEMPMON_FANCONTROL (TEMPMON_BASE + 0x10) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* I2C Master Controller */ |
| |
| #define I2C_COMMAND (0x00) |
| #define I2C_TIMING (0x04) |
| #define I2C_TASKLENGTH (0x08) /* High read, low write */ |
| #define I2C_TASKADDRESS (0x0C) /* High read, low write */ |
| #define I2C_MONITOR (0x1C) |
| |
| #define I2C_SPEED_400 (0x04030404) |
| #define I2C_SPEED_100 (0x13121313) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* DMA Controller */ |
| |
| #define DMA_BASE_WRITE (0x100) |
| #define DMA_BASE_READ (0x140) |
| |
| #define TS_CONTROL(_io) ((_io)->regs + 0x00) |
| #define TS_CONTROL2(_io) ((_io)->regs + 0x04) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* DMA Buffer */ |
| |
| #define DMA_BUFFER_CONTROL(_dma) ((_dma)->regs + 0x00) |
| #define DMA_BUFFER_ACK(_dma) ((_dma)->regs + 0x04) |
| #define DMA_BUFFER_CURRENT(_dma) ((_dma)->regs + 0x08) |
| #define DMA_BUFFER_SIZE(_dma) ((_dma)->regs + 0x0c) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* CI Interface (only CI-Bridge) */ |
| |
| #define CI_BASE (0x400) |
| #define CI_CONTROL(i) (CI_BASE + (i) * 32 + 0x00) |
| |
| #define CI_DO_ATTRIBUTE_RW(i) (CI_BASE + (i) * 32 + 0x04) |
| #define CI_DO_IO_RW(i) (CI_BASE + (i) * 32 + 0x08) |
| #define CI_READDATA(i) (CI_BASE + (i) * 32 + 0x0c) |
| #define CI_DO_READ_ATTRIBUTES(i) (CI_BASE + (i) * 32 + 0x10) |
| |
| #define CI_RESET_CAM (0x00000001) |
| #define CI_POWER_ON (0x00000002) |
| #define CI_ENABLE (0x00000004) |
| #define CI_BYPASS_DISABLE (0x00000010) |
| |
| #define CI_CAM_READY (0x00010000) |
| #define CI_CAM_DETECT (0x00020000) |
| #define CI_READY (0x80000000) |
| |
| #define CI_READ_CMD (0x40000000) |
| #define CI_WRITE_CMD (0x80000000) |
| |
| #define CI_BUFFER_BASE (0x3000) |
| #define CI_BUFFER_SIZE (0x0800) |
| |
| #define CI_BUFFER(i) (CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE) |
| |
| /* ------------------------------------------------------------------------- */ |
| /* LNB commands (mxl5xx / Max S8) */ |
| |
| #define LNB_BASE (0x400) |
| #define LNB_CONTROL(i) (LNB_BASE + (i) * 0x20 + 0x00) |
| |
| #define LNB_CMD (7ULL << 0) |
| #define LNB_CMD_NOP 0 |
| #define LNB_CMD_INIT 1 |
| #define LNB_CMD_LOW 3 |
| #define LNB_CMD_HIGH 4 |
| #define LNB_CMD_OFF 5 |
| #define LNB_CMD_DISEQC 6 |
| |
| #define LNB_BUSY BIT_ULL(4) |
| #define LNB_TONE BIT_ULL(15) |
| |
| #define LNB_BUF_LEVEL(i) (LNB_BASE + (i) * 0x20 + 0x10) |
| #define LNB_BUF_WRITE(i) (LNB_BASE + (i) * 0x20 + 0x14) |
| |
| #endif /* __DDBRIDGE_REGS_H__ */ |
