| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for K2G SOC |
| * |
| * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/keystone.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "ti,k2g","ti,keystone"; |
| model = "Texas Instruments K2G SoC"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| |
| chosen { }; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| rproc0 = &dsp0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| gic: interrupt-controller@2561000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x02561000 0x0 0x1000>, |
| <0x0 0x02562000 0x0 0x2000>, |
| <0x0 0x02564000 0x0 0x2000>, |
| <0x0 0x02566000 0x0 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = |
| <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a15-pmu"; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| usbphy { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "simple-bus"; |
| |
| usb0_phy: usb-phy@0 { |
| compatible = "usb-nop-xceiv"; |
| reg = <0>; |
| status = "disabled"; |
| }; |
| |
| usb1_phy: usb-phy@1 { |
| compatible = "usb-nop-xceiv"; |
| reg = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| soc0: soc@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #pinctrl-cells = <1>; |
| compatible = "ti,keystone","simple-bus"; |
| ranges = <0x0 0x0 0x0 0xc0000000>; |
| dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; |
| |
| msm_ram: msmram@c000000 { |
| compatible = "mmio-sram"; |
| reg = <0x0c000000 0x100000>; |
| ranges = <0x0 0x0c000000 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| sram-bm@f7000 { |
| reg = <0x000f7000 0x8000>; |
| }; |
| }; |
| |
| k2g_pinctrl: pinmux@2621000 { |
| compatible = "pinctrl-single"; |
| reg = <0x02621000 0x410>; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0x001b0007>; |
| }; |
| |
| devctrl: device-state-control@2620000 { |
| compatible = "ti,keystone-devctrl", "syscon", "simple-mfd"; |
| reg = <0x02620000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x02620000 0x1000>; |
| |
| kirq0: keystone_irq@2a0 { |
| compatible = "ti,keystone-irq"; |
| reg = <0x2a0 0x10>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| ti,syscon-dev = <&devctrl 0x2a0>; |
| }; |
| |
| dspgpio0: keystone_dsp_gpio@240 { |
| compatible = "ti,keystone-dsp-gpio"; |
| reg = <0x240 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio,syscon-dev = <&devctrl 0x240>; |
| }; |
| }; |
| |
| uart0: serial@2530c00 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| current-speed = <115200>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| reg = <0x02530c00 0x100>; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&k2g_clks 0x2c 0>; |
| power-domains = <&k2g_pds 0x2c>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@2531000 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| current-speed = <115200>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| reg = <0x02531000 0x100>; |
| interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&k2g_clks 0x2d 0>; |
| power-domains = <&k2g_pds 0x2d>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@2531400 { |
| compatible = "ti,da830-uart", "ns16550a"; |
| current-speed = <115200>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| reg = <0x02531400 0x100>; |
| interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&k2g_clks 0x2e 0>; |
| power-domains = <&k2g_pds 0x2e>; |
| status = "disabled"; |
| }; |
| |
| dcan0: can@260b200 { |
| compatible = "ti,am4372-d_can", "ti,am3352-d_can"; |
| reg = <0x0260B200 0x200>; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| power-domains = <&k2g_pds 0x0008>; |
| clocks = <&k2g_clks 0x0008 1>; |
| }; |
| |
| dcan1: can@260b400 { |
| compatible = "ti,am4372-d_can", "ti,am3352-d_can"; |
| reg = <0x0260B400 0x200>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| power-domains = <&k2g_pds 0x0009>; |
| clocks = <&k2g_clks 0x0009 1>; |
| }; |
| |
| i2c0: i2c@2530000 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530000 0x400>; |
| clocks = <&k2g_clks 0x003a 0>; |
| power-domains = <&k2g_pds 0x003a>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2530400 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530400 0x400>; |
| clocks = <&k2g_clks 0x003b 0>; |
| power-domains = <&k2g_pds 0x003b>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2530800 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530800 0x400>; |
| clocks = <&k2g_clks 0x003c 0>; |
| power-domains = <&k2g_pds 0x003c>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| dsp0: dsp@10800000 { |
| compatible = "ti,k2g-dsp"; |
| reg = <0x10800000 0x00100000>, |
| <0x10e00000 0x00008000>, |
| <0x10f00000 0x00008000>; |
| reg-names = "l2sram", "l1pram", "l1dram"; |
| power-domains = <&k2g_pds 0x0046>; |
| ti,syscon-dev = <&devctrl 0x844>; |
| resets = <&k2g_reset 0x0046 0x1>; |
| interrupt-parent = <&kirq0>; |
| interrupts = <0 8>; |
| interrupt-names = "vring", "exception"; |
| kick-gpios = <&dspgpio0 27 0>; |
| status = "disabled"; |
| }; |
| |
| msgmgr: msgmgr@2a00000 { |
| compatible = "ti,k2g-message-manager"; |
| #mbox-cells = <2>; |
| reg-names = "queue_proxy_region", |
| "queue_state_debug_region"; |
| reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; |
| interrupt-names = "rx_005", |
| "rx_057"; |
| interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmmc: pmmc@2921c00 { |
| compatible = "ti,k2g-sci"; |
| /* |
| * In case of rare platforms that does not use k2g as |
| * system master, use /delete-property/ |
| */ |
| ti,system-reboot-controller; |
| mbox-names = "rx", "tx"; |
| mboxes= <&msgmgr 5 2>, |
| <&msgmgr 0 0>; |
| reg-names = "debug_messages"; |
| reg = <0x02921c00 0x400>; |
| |
| k2g_pds: power-controller { |
| compatible = "ti,sci-pm-domain"; |
| #power-domain-cells = <1>; |
| }; |
| |
| k2g_clks: clocks { |
| compatible = "ti,k2g-sci-clk"; |
| #clock-cells = <2>; |
| }; |
| |
| k2g_reset: reset-controller { |
| compatible = "ti,sci-reset"; |
| #reset-cells = <2>; |
| }; |
| }; |
| |
| gpio0: gpio@2603000 { |
| compatible = "ti,k2g-gpio", "ti,keystone-gpio"; |
| reg = <0x02603000 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <144>; |
| ti,davinci-gpio-unbanked = <0>; |
| clocks = <&k2g_clks 0x001b 0x0>; |
| clock-names = "gpio"; |
| }; |
| |
| gpio1: gpio@260a000 { |
| compatible = "ti,k2g-gpio", "ti,keystone-gpio"; |
| reg = <0x0260a000 0x100>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 443 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 444 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 445 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 446 IRQ_TYPE_EDGE_RISING>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ti,ngpio = <68>; |
| ti,davinci-gpio-unbanked = <0>; |
| clocks = <&k2g_clks 0x001c 0x0>; |
| clock-names = "gpio"; |
| }; |
| |
| edma0: edma@2700000 { |
| compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; |
| reg = <0x02700000 0x8000>; |
| reg-names = "edma3_cc"; |
| interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "edma3_ccint", "emda3_mperr", |
| "edma3_ccerrint"; |
| dma-requests = <64>; |
| #dma-cells = <2>; |
| |
| ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; |
| |
| ti,edma-memcpy-channels = <32 33 34 35>; |
| |
| power-domains = <&k2g_pds 0x3f>; |
| }; |
| |
| edma0_tptc0: tptc@2760000 { |
| compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; |
| reg = <0x02760000 0x400>; |
| power-domains = <&k2g_pds 0x3f>; |
| }; |
| |
| edma0_tptc1: tptc@2768000 { |
| compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; |
| reg = <0x02768000 0x400>; |
| power-domains = <&k2g_pds 0x3f>; |
| }; |
| |
| edma1: edma@2728000 { |
| compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; |
| reg = <0x02728000 0x8000>; |
| reg-names = "edma3_cc"; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "edma3_ccint", "emda3_mperr", |
| "edma3_ccerrint"; |
| dma-requests = <64>; |
| #dma-cells = <2>; |
| |
| ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>; |
| |
| /* |
| * memcpy is disabled, can be enabled with: |
| * ti,edma-memcpy-channels = <12 13 14 15>; |
| * for example. |
| */ |
| |
| power-domains = <&k2g_pds 0x4f>; |
| }; |
| |
| edma1_tptc0: tptc@27b0000 { |
| compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; |
| reg = <0x027b0000 0x400>; |
| power-domains = <&k2g_pds 0x4f>; |
| }; |
| |
| edma1_tptc1: tptc@27b8000 { |
| compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; |
| reg = <0x027b8000 0x400>; |
| power-domains = <&k2g_pds 0x4f>; |
| }; |
| |
| mmc0: mmc@23000000 { |
| compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; |
| reg = <0x23000000 0x400>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; |
| dmas = <&edma1 24 0>, <&edma1 25 0>; |
| dma-names = "tx", "rx"; |
| bus-width = <4>; |
| ti,needs-special-reset; |
| no-1-8-v; |
| max-frequency = <96000000>; |
| power-domains = <&k2g_pds 0xb>; |
| clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>; |
| clock-names = "fck", "mmchsdb_fck"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@23100000 { |
| compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; |
| reg = <0x23100000 0x400>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; |
| dmas = <&edma1 26 0>, <&edma1 27 0>; |
| dma-names = "tx", "rx"; |
| bus-width = <8>; |
| ti,needs-special-reset; |
| max-frequency = <96000000>; |
| power-domains = <&k2g_pds 0xc>; |
| clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; |
| clock-names = "fck", "mmchsdb_fck"; |
| }; |
| |
| qspi: qspi@2940000 { |
| compatible = "ti,k2g-qspi", "cdns,qspi-nor"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x02940000 0x1000>, |
| <0x24000000 0x4000000>; |
| interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; |
| cdns,fifo-depth = <256>; |
| cdns,fifo-width = <4>; |
| cdns,trigger-address = <0x24000000>; |
| clocks = <&k2g_clks 0x43 0x0>; |
| power-domains = <&k2g_pds 0x43>; |
| status = "disabled"; |
| }; |
| |
| mcasp0: mcasp@2340000 { |
| compatible = "ti,am33xx-mcasp-audio"; |
| reg = <0x02340000 0x2000>, |
| <0x21804000 0x1000>; |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma0 24 1>, <&edma0 25 1>; |
| dma-names = "tx", "rx"; |
| power-domains = <&k2g_pds 0x4>; |
| clocks = <&k2g_clks 0x4 0>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| mcasp1: mcasp@2342000 { |
| compatible = "ti,am33xx-mcasp-audio"; |
| reg = <0x02342000 0x2000>, |
| <0x21804400 0x1000>; |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma1 48 1>, <&edma1 49 1>; |
| dma-names = "tx", "rx"; |
| power-domains = <&k2g_pds 0x5>; |
| clocks = <&k2g_clks 0x5 0>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| mcasp2: mcasp@2344000 { |
| compatible = "ti,am33xx-mcasp-audio"; |
| reg = <0x02344000 0x2000>, |
| <0x21804800 0x1000>; |
| reg-names = "mpu","dat"; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| dmas = <&edma1 50 1>, <&edma1 51 1>; |
| dma-names = "tx", "rx"; |
| power-domains = <&k2g_pds 0x6>; |
| clocks = <&k2g_clks 0x6 0>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| keystone_usb0: keystone-dwc3@2680000 { |
| compatible = "ti,keystone-dwc3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x2680000 0x10000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| ranges; |
| dma-coherent; |
| dma-ranges; |
| status = "disabled"; |
| power-domains = <&k2g_pds 0x0016>; |
| |
| usb0: usb@2690000 { |
| compatible = "snps,dwc3"; |
| reg = <0x2690000 0x10000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| usb-phy = <&usb0_phy>; |
| status = "disabled"; |
| }; |
| }; |
| |
| keystone_usb1: keystone-dwc3@2580000 { |
| compatible = "ti,keystone-dwc3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x2580000 0x10000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| ranges; |
| dma-coherent; |
| dma-ranges; |
| status = "disabled"; |
| power-domains = <&k2g_pds 0x0017>; |
| |
| usb1: usb@2590000 { |
| compatible = "snps,dwc3"; |
| reg = <0x2590000 0x10000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| usb-phy = <&usb1_phy>; |
| status = "disabled"; |
| }; |
| }; |
| |
| ecap0: pwm@21d1800 { |
| compatible = "ti,k2g-ecap", "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x021d1800 0x60>; |
| power-domains = <&k2g_pds 0x38>; |
| clocks = <&k2g_clks 0x38 0>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| ecap1: pwm@21d1c00 { |
| compatible = "ti,k2g-ecap", "ti,am3352-ecap"; |
| #pwm-cells = <3>; |
| reg = <0x021d1c00 0x60>; |
| power-domains = <&k2g_pds 0x39>; |
| clocks = <&k2g_clks 0x39 0x0>; |
| clock-names = "fck"; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@21805400 { |
| compatible = "ti,keystone-spi"; |
| reg = <0x21805400 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&k2g_pds 0x0010>; |
| clocks = <&k2g_clks 0x0010 0>; |
| }; |
| |
| spi1: spi@21805800 { |
| compatible = "ti,keystone-spi"; |
| reg = <0x21805800 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&k2g_pds 0x0011>; |
| clocks = <&k2g_clks 0x0011 0>; |
| }; |
| |
| spi2: spi@21805c00 { |
| compatible = "ti,keystone-spi"; |
| reg = <0x21805C00 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&k2g_pds 0x0012>; |
| clocks = <&k2g_clks 0x0012 0>; |
| }; |
| |
| spi3: spi@21806000 { |
| compatible = "ti,keystone-spi"; |
| reg = <0x21806000 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&k2g_pds 0x0013>; |
| clocks = <&k2g_clks 0x0013 0>; |
| }; |
| |
| wdt: wdt@02250000 { |
| compatible = "ti,keystone-wdt", "ti,davinci-wdt"; |
| reg = <0x02250000 0x80>; |
| power-domains = <&k2g_pds 0x22>; |
| clocks = <&k2g_clks 0x22 0>; |
| }; |
| |
| emif: emif@21010000 { |
| compatible = "ti,emif-keystone"; |
| reg = <0x21010000 0x200>; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| }; |
