| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * VHT handling | |
| * | |
| * Portions of this file | |
| * Copyright(c) 2015 - 2016 Intel Deutschland GmbH | |
| * Copyright (C) 2018 - 2024 Intel Corporation | |
| */ | |
| #include <linux/ieee80211.h> | |
| #include <linux/export.h> | |
| #include <net/mac80211.h> | |
| #include "ieee80211_i.h" | |
| #include "rate.h" | |
| static void __check_vhtcap_disable(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_sta_vht_cap *vht_cap, | |
| u32 flag) | |
| { | |
| __le32 le_flag = cpu_to_le32(flag); | |
| if (sdata->u.mgd.vht_capa_mask.vht_cap_info & le_flag && | |
| !(sdata->u.mgd.vht_capa.vht_cap_info & le_flag)) | |
| vht_cap->cap &= ~flag; | |
| } | |
| void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_sta_vht_cap *vht_cap) | |
| { | |
| int i; | |
| u16 rxmcs_mask, rxmcs_cap, rxmcs_n, txmcs_mask, txmcs_cap, txmcs_n; | |
| if (!vht_cap->vht_supported) | |
| return; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return; | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_RXLDPC); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_SHORT_GI_80); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_SHORT_GI_160); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_TXSTBC); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN); | |
| __check_vhtcap_disable(sdata, vht_cap, | |
| IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN); | |
| /* Allow user to decrease AMPDU length exponent */ | |
| if (sdata->u.mgd.vht_capa_mask.vht_cap_info & | |
| cpu_to_le32(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK)) { | |
| u32 cap, n; | |
| n = le32_to_cpu(sdata->u.mgd.vht_capa.vht_cap_info) & | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | |
| n >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | |
| cap = vht_cap->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | |
| cap >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | |
| if (n < cap) { | |
| vht_cap->cap &= | |
| ~IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; | |
| vht_cap->cap |= | |
| n << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | |
| } | |
| } | |
| /* Allow the user to decrease MCSes */ | |
| rxmcs_mask = | |
| le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.rx_mcs_map); | |
| rxmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.rx_mcs_map); | |
| rxmcs_n &= rxmcs_mask; | |
| rxmcs_cap = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | |
| txmcs_mask = | |
| le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.tx_mcs_map); | |
| txmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.tx_mcs_map); | |
| txmcs_n &= txmcs_mask; | |
| txmcs_cap = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); | |
| for (i = 0; i < 8; i++) { | |
| u8 m, n, c; | |
| m = (rxmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| n = (rxmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| c = (rxmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || | |
| n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { | |
| rxmcs_cap &= ~(3 << 2*i); | |
| rxmcs_cap |= (rxmcs_n & (3 << 2*i)); | |
| } | |
| m = (txmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| n = (txmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| c = (txmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || | |
| n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { | |
| txmcs_cap &= ~(3 << 2*i); | |
| txmcs_cap |= (txmcs_n & (3 << 2*i)); | |
| } | |
| } | |
| vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(rxmcs_cap); | |
| vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(txmcs_cap); | |
| } | |
| void | |
| ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_supported_band *sband, | |
| const struct ieee80211_vht_cap *vht_cap_ie, | |
| const struct ieee80211_vht_cap *vht_cap_ie2, | |
| struct link_sta_info *link_sta) | |
| { | |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; | |
| struct ieee80211_sta_vht_cap own_cap; | |
| u32 cap_info, i; | |
| bool have_80mhz; | |
| u32 mpdu_len; | |
| memset(vht_cap, 0, sizeof(*vht_cap)); | |
| if (!link_sta->pub->ht_cap.ht_supported) | |
| return; | |
| if (!vht_cap_ie || !sband->vht_cap.vht_supported) | |
| return; | |
| /* Allow VHT if at least one channel on the sband supports 80 MHz */ | |
| have_80mhz = false; | |
| for (i = 0; i < sband->n_channels; i++) { | |
| if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | | |
| IEEE80211_CHAN_NO_80MHZ)) | |
| continue; | |
| have_80mhz = true; | |
| break; | |
| } | |
| if (!have_80mhz) | |
| return; | |
| /* | |
| * A VHT STA must support 40 MHz, but if we verify that here | |
| * then we break a few things - some APs (e.g. Netgear R6300v2 | |
| * and others based on the BCM4360 chipset) will unset this | |
| * capability bit when operating in 20 MHz. | |
| */ | |
| vht_cap->vht_supported = true; | |
| own_cap = sband->vht_cap; | |
| /* | |
| * If user has specified capability overrides, take care | |
| * of that if the station we're setting up is the AP that | |
| * we advertised a restricted capability set to. Override | |
| * our own capabilities and then use those below. | |
| */ | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && | |
| !test_sta_flag(link_sta->sta, WLAN_STA_TDLS_PEER)) | |
| ieee80211_apply_vhtcap_overrides(sdata, &own_cap); | |
| /* take some capabilities as-is */ | |
| cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info); | |
| vht_cap->cap = cap_info; | |
| vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC | | |
| IEEE80211_VHT_CAP_VHT_TXOP_PS | | |
| IEEE80211_VHT_CAP_HTC_VHT | | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | | |
| IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB | | |
| IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB | | |
| IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | | |
| IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN; | |
| vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK, | |
| own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK); | |
| /* and some based on our own capabilities */ | |
| switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { | |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: | |
| vht_cap->cap |= cap_info & | |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; | |
| break; | |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: | |
| vht_cap->cap |= cap_info & | |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | |
| break; | |
| default: | |
| /* nothing */ | |
| break; | |
| } | |
| /* symmetric capabilities */ | |
| vht_cap->cap |= cap_info & own_cap.cap & | |
| (IEEE80211_VHT_CAP_SHORT_GI_80 | | |
| IEEE80211_VHT_CAP_SHORT_GI_160); | |
| /* remaining ones */ | |
| if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | |
| vht_cap->cap |= cap_info & | |
| (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK); | |
| if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | |
| vht_cap->cap |= cap_info & | |
| (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK); | |
| if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | |
| vht_cap->cap |= cap_info & | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; | |
| if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | |
| vht_cap->cap |= cap_info & | |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; | |
| if (own_cap.cap & IEEE80211_VHT_CAP_TXSTBC) | |
| vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_RXSTBC_MASK; | |
| if (own_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK) | |
| vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_TXSTBC; | |
| /* Copy peer MCS info, the driver might need them. */ | |
| memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, | |
| sizeof(struct ieee80211_vht_mcs_info)); | |
| /* copy EXT_NSS_BW Support value or remove the capability */ | |
| if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_VHT_EXT_NSS_BW)) | |
| vht_cap->cap |= (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK); | |
| else | |
| vht_cap->vht_mcs.tx_highest &= | |
| ~cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); | |
| /* but also restrict MCSes */ | |
| for (i = 0; i < 8; i++) { | |
| u16 own_rx, own_tx, peer_rx, peer_tx; | |
| own_rx = le16_to_cpu(own_cap.vht_mcs.rx_mcs_map); | |
| own_rx = (own_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| own_tx = le16_to_cpu(own_cap.vht_mcs.tx_mcs_map); | |
| own_tx = (own_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| peer_rx = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | |
| peer_rx = (peer_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| peer_tx = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); | |
| peer_tx = (peer_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| if (peer_tx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | |
| if (own_rx == IEEE80211_VHT_MCS_NOT_SUPPORTED) | |
| peer_tx = IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| else if (own_rx < peer_tx) | |
| peer_tx = own_rx; | |
| } | |
| if (peer_rx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | |
| if (own_tx == IEEE80211_VHT_MCS_NOT_SUPPORTED) | |
| peer_rx = IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| else if (own_tx < peer_rx) | |
| peer_rx = own_tx; | |
| } | |
| vht_cap->vht_mcs.rx_mcs_map &= | |
| ~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); | |
| vht_cap->vht_mcs.rx_mcs_map |= cpu_to_le16(peer_rx << i * 2); | |
| vht_cap->vht_mcs.tx_mcs_map &= | |
| ~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); | |
| vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2); | |
| } | |
| /* | |
| * This is a workaround for VHT-enabled STAs which break the spec | |
| * and have the VHT-MCS Rx map filled in with value 3 for all eight | |
| * spatial streams, an example is AR9462. | |
| * | |
| * As per spec, in section 22.1.1 Introduction to the VHT PHY | |
| * A VHT STA shall support at least single spatial stream VHT-MCSs | |
| * 0 to 7 (transmit and receive) in all supported channel widths. | |
| */ | |
| if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) { | |
| vht_cap->vht_supported = false; | |
| sdata_info(sdata, | |
| "Ignoring VHT IE from %pM (link:%pM) due to invalid rx_mcs_map\n", | |
| link_sta->sta->addr, link_sta->addr); | |
| return; | |
| } | |
| /* finally set up the bandwidth */ | |
| switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { | |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: | |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | |
| break; | |
| default: | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; | |
| if (!(vht_cap->vht_mcs.tx_highest & | |
| cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE))) | |
| break; | |
| /* | |
| * If this is non-zero, then it does support 160 MHz after all, | |
| * in one form or the other. We don't distinguish here (or even | |
| * above) between 160 and 80+80 yet. | |
| */ | |
| if (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) | |
| link_sta->cur_max_bandwidth = | |
| IEEE80211_STA_RX_BW_160; | |
| } | |
| link_sta->pub->bandwidth = ieee80211_sta_cur_vht_bw(link_sta); | |
| /* | |
| * Work around the Cisco 9115 FW 17.3 bug by taking the min of | |
| * both reported MPDU lengths. | |
| */ | |
| mpdu_len = vht_cap->cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK; | |
| if (vht_cap_ie2) | |
| mpdu_len = min_t(u32, mpdu_len, | |
| le32_get_bits(vht_cap_ie2->vht_cap_info, | |
| IEEE80211_VHT_CAP_MAX_MPDU_MASK)); | |
| /* | |
| * FIXME - should the amsdu len be per link? store per link | |
| * and maintain a minimum? | |
| */ | |
| switch (mpdu_len) { | |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454: | |
| link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_11454; | |
| break; | |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991: | |
| link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_7991; | |
| break; | |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895: | |
| default: | |
| link_sta->pub->agg.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_3895; | |
| break; | |
| } | |
| ieee80211_sta_recalc_aggregates(&link_sta->sta->sta); | |
| } | |
| /* FIXME: move this to some better location - parses HE/EHT now */ | |
| static enum ieee80211_sta_rx_bandwidth | |
| __ieee80211_sta_cap_rx_bw(struct link_sta_info *link_sta, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| unsigned int link_id = link_sta->link_id; | |
| struct ieee80211_sub_if_data *sdata = link_sta->sta->sdata; | |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; | |
| struct ieee80211_sta_he_cap *he_cap = &link_sta->pub->he_cap; | |
| struct ieee80211_sta_eht_cap *eht_cap = &link_sta->pub->eht_cap; | |
| u32 cap_width; | |
| if (he_cap->has_he) { | |
| enum nl80211_band band; | |
| u8 info; | |
| if (chandef) { | |
| band = chandef->chan->band; | |
| } else { | |
| struct ieee80211_bss_conf *link_conf; | |
| rcu_read_lock(); | |
| link_conf = rcu_dereference(sdata->vif.link_conf[link_id]); | |
| band = link_conf->chanreq.oper.chan->band; | |
| rcu_read_unlock(); | |
| } | |
| if (eht_cap->has_eht && band == NL80211_BAND_6GHZ) { | |
| info = eht_cap->eht_cap_elem.phy_cap_info[0]; | |
| if (info & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) | |
| return IEEE80211_STA_RX_BW_320; | |
| } | |
| info = he_cap->he_cap_elem.phy_cap_info[0]; | |
| if (band == NL80211_BAND_2GHZ) { | |
| if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G) | |
| return IEEE80211_STA_RX_BW_40; | |
| return IEEE80211_STA_RX_BW_20; | |
| } | |
| if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G || | |
| info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) | |
| return IEEE80211_STA_RX_BW_160; | |
| if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G) | |
| return IEEE80211_STA_RX_BW_80; | |
| return IEEE80211_STA_RX_BW_20; | |
| } | |
| if (!vht_cap->vht_supported) | |
| return link_sta->pub->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | |
| IEEE80211_STA_RX_BW_40 : | |
| IEEE80211_STA_RX_BW_20; | |
| cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || | |
| cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) | |
| return IEEE80211_STA_RX_BW_160; | |
| /* | |
| * If this is non-zero, then it does support 160 MHz after all, | |
| * in one form or the other. We don't distinguish here (or even | |
| * above) between 160 and 80+80 yet. | |
| */ | |
| if (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) | |
| return IEEE80211_STA_RX_BW_160; | |
| return IEEE80211_STA_RX_BW_80; | |
| } | |
| enum ieee80211_sta_rx_bandwidth | |
| _ieee80211_sta_cap_rx_bw(struct link_sta_info *link_sta, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| /* | |
| * With RX OMI, also pretend that the STA's capability changed. | |
| * Of course this isn't really true, it didn't change, only our | |
| * RX capability was changed by notifying RX OMI to the STA. | |
| * The purpose, however, is to save power, and that requires | |
| * changing also transmissions to the AP and the chanctx. The | |
| * transmissions depend on link_sta->bandwidth which is set in | |
| * _ieee80211_sta_cur_vht_bw() below, but the chanctx depends | |
| * on the result of this function which is also called by | |
| * _ieee80211_sta_cur_vht_bw(), so we need to do that here as | |
| * well. This is sufficient for the steady state, but during | |
| * the transition we already need to change TX/RX separately, | |
| * so _ieee80211_sta_cur_vht_bw() below applies the _tx one. | |
| */ | |
| return min(__ieee80211_sta_cap_rx_bw(link_sta, chandef), | |
| link_sta->rx_omi_bw_rx); | |
| } | |
| enum nl80211_chan_width | |
| ieee80211_sta_cap_chan_bw(struct link_sta_info *link_sta) | |
| { | |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; | |
| u32 cap_width; | |
| if (!vht_cap->vht_supported) { | |
| if (!link_sta->pub->ht_cap.ht_supported) | |
| return NL80211_CHAN_WIDTH_20_NOHT; | |
| return link_sta->pub->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? | |
| NL80211_CHAN_WIDTH_40 : NL80211_CHAN_WIDTH_20; | |
| } | |
| cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) | |
| return NL80211_CHAN_WIDTH_160; | |
| else if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) | |
| return NL80211_CHAN_WIDTH_80P80; | |
| return NL80211_CHAN_WIDTH_80; | |
| } | |
| enum nl80211_chan_width | |
| ieee80211_sta_rx_bw_to_chan_width(struct link_sta_info *link_sta) | |
| { | |
| enum ieee80211_sta_rx_bandwidth cur_bw = | |
| link_sta->pub->bandwidth; | |
| struct ieee80211_sta_vht_cap *vht_cap = | |
| &link_sta->pub->vht_cap; | |
| u32 cap_width; | |
| switch (cur_bw) { | |
| case IEEE80211_STA_RX_BW_20: | |
| if (!link_sta->pub->ht_cap.ht_supported) | |
| return NL80211_CHAN_WIDTH_20_NOHT; | |
| else | |
| return NL80211_CHAN_WIDTH_20; | |
| case IEEE80211_STA_RX_BW_40: | |
| return NL80211_CHAN_WIDTH_40; | |
| case IEEE80211_STA_RX_BW_80: | |
| return NL80211_CHAN_WIDTH_80; | |
| case IEEE80211_STA_RX_BW_160: | |
| cap_width = | |
| vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; | |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) | |
| return NL80211_CHAN_WIDTH_160; | |
| return NL80211_CHAN_WIDTH_80P80; | |
| default: | |
| return NL80211_CHAN_WIDTH_20; | |
| } | |
| } | |
| /* FIXME: rename/move - this deals with everything not just VHT */ | |
| enum ieee80211_sta_rx_bandwidth | |
| _ieee80211_sta_cur_vht_bw(struct link_sta_info *link_sta, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct sta_info *sta = link_sta->sta; | |
| enum nl80211_chan_width bss_width; | |
| enum ieee80211_sta_rx_bandwidth bw; | |
| if (chandef) { | |
| bss_width = chandef->width; | |
| } else { | |
| struct ieee80211_bss_conf *link_conf; | |
| rcu_read_lock(); | |
| link_conf = rcu_dereference(sta->sdata->vif.link_conf[link_sta->link_id]); | |
| if (WARN_ON_ONCE(!link_conf)) { | |
| rcu_read_unlock(); | |
| return IEEE80211_STA_RX_BW_20; | |
| } | |
| bss_width = link_conf->chanreq.oper.width; | |
| rcu_read_unlock(); | |
| } | |
| /* intentionally do not take rx_bw_omi_rx into account */ | |
| bw = __ieee80211_sta_cap_rx_bw(link_sta, chandef); | |
| bw = min(bw, link_sta->cur_max_bandwidth); | |
| /* but do apply rx_omi_bw_tx */ | |
| bw = min(bw, link_sta->rx_omi_bw_tx); | |
| /* Don't consider AP's bandwidth for TDLS peers, section 11.23.1 of | |
| * IEEE80211-2016 specification makes higher bandwidth operation | |
| * possible on the TDLS link if the peers have wider bandwidth | |
| * capability. | |
| * | |
| * However, in this case, and only if the TDLS peer is authorized, | |
| * limit to the tdls_chandef so that the configuration here isn't | |
| * wider than what's actually requested on the channel context. | |
| */ | |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && | |
| test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW) && | |
| test_sta_flag(sta, WLAN_STA_AUTHORIZED) && | |
| sta->tdls_chandef.chan) | |
| bw = min(bw, ieee80211_chan_width_to_rx_bw(sta->tdls_chandef.width)); | |
| else | |
| bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); | |
| return bw; | |
| } | |
| void ieee80211_sta_init_nss(struct link_sta_info *link_sta) | |
| { | |
| u8 ht_rx_nss = 0, vht_rx_nss = 0, he_rx_nss = 0, eht_rx_nss = 0, rx_nss; | |
| bool support_160; | |
| if (link_sta->pub->eht_cap.has_eht) { | |
| int i; | |
| const u8 *rx_nss_mcs = (void *)&link_sta->pub->eht_cap.eht_mcs_nss_supp; | |
| /* get the max nss for EHT over all possible bandwidths and mcs */ | |
| for (i = 0; i < sizeof(struct ieee80211_eht_mcs_nss_supp); i++) | |
| eht_rx_nss = max_t(u8, eht_rx_nss, | |
| u8_get_bits(rx_nss_mcs[i], | |
| IEEE80211_EHT_MCS_NSS_RX)); | |
| } | |
| if (link_sta->pub->he_cap.has_he) { | |
| int i; | |
| u8 rx_mcs_80 = 0, rx_mcs_160 = 0; | |
| const struct ieee80211_sta_he_cap *he_cap = &link_sta->pub->he_cap; | |
| u16 mcs_160_map = | |
| le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_160); | |
| u16 mcs_80_map = le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_80); | |
| for (i = 7; i >= 0; i--) { | |
| u8 mcs_160 = (mcs_160_map >> (2 * i)) & 3; | |
| if (mcs_160 != IEEE80211_HE_MCS_NOT_SUPPORTED) { | |
| rx_mcs_160 = i + 1; | |
| break; | |
| } | |
| } | |
| for (i = 7; i >= 0; i--) { | |
| u8 mcs_80 = (mcs_80_map >> (2 * i)) & 3; | |
| if (mcs_80 != IEEE80211_HE_MCS_NOT_SUPPORTED) { | |
| rx_mcs_80 = i + 1; | |
| break; | |
| } | |
| } | |
| support_160 = he_cap->he_cap_elem.phy_cap_info[0] & | |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G; | |
| if (support_160) | |
| he_rx_nss = min(rx_mcs_80, rx_mcs_160); | |
| else | |
| he_rx_nss = rx_mcs_80; | |
| } | |
| if (link_sta->pub->ht_cap.ht_supported) { | |
| if (link_sta->pub->ht_cap.mcs.rx_mask[0]) | |
| ht_rx_nss++; | |
| if (link_sta->pub->ht_cap.mcs.rx_mask[1]) | |
| ht_rx_nss++; | |
| if (link_sta->pub->ht_cap.mcs.rx_mask[2]) | |
| ht_rx_nss++; | |
| if (link_sta->pub->ht_cap.mcs.rx_mask[3]) | |
| ht_rx_nss++; | |
| /* FIXME: consider rx_highest? */ | |
| } | |
| if (link_sta->pub->vht_cap.vht_supported) { | |
| int i; | |
| u16 rx_mcs_map; | |
| rx_mcs_map = le16_to_cpu(link_sta->pub->vht_cap.vht_mcs.rx_mcs_map); | |
| for (i = 7; i >= 0; i--) { | |
| u8 mcs = (rx_mcs_map >> (2 * i)) & 3; | |
| if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { | |
| vht_rx_nss = i + 1; | |
| break; | |
| } | |
| } | |
| /* FIXME: consider rx_highest? */ | |
| } | |
| rx_nss = max(vht_rx_nss, ht_rx_nss); | |
| rx_nss = max(he_rx_nss, rx_nss); | |
| rx_nss = max(eht_rx_nss, rx_nss); | |
| rx_nss = max_t(u8, 1, rx_nss); | |
| link_sta->capa_nss = rx_nss; | |
| /* that shouldn't be set yet, but we can handle it anyway */ | |
| if (link_sta->op_mode_nss) | |
| link_sta->pub->rx_nss = | |
| min_t(u8, rx_nss, link_sta->op_mode_nss); | |
| else | |
| link_sta->pub->rx_nss = rx_nss; | |
| } | |
| u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, | |
| struct link_sta_info *link_sta, | |
| u8 opmode, enum nl80211_band band) | |
| { | |
| enum ieee80211_sta_rx_bandwidth new_bw; | |
| struct sta_opmode_info sta_opmode = {}; | |
| u32 changed = 0; | |
| u8 nss; | |
| /* ignore - no support for BF yet */ | |
| if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) | |
| return 0; | |
| nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; | |
| nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; | |
| nss += 1; | |
| if (link_sta->op_mode_nss != nss) { | |
| if (nss <= link_sta->capa_nss) { | |
| link_sta->op_mode_nss = nss; | |
| if (nss != link_sta->pub->rx_nss) { | |
| link_sta->pub->rx_nss = nss; | |
| changed |= IEEE80211_RC_NSS_CHANGED; | |
| sta_opmode.rx_nss = link_sta->pub->rx_nss; | |
| sta_opmode.changed |= STA_OPMODE_N_SS_CHANGED; | |
| } | |
| } else { | |
| sdata_dbg(sdata, | |
| "Ignore NSS change to invalid %d in VHT opmode notif from %pM", | |
| nss, link_sta->pub->addr); | |
| } | |
| } | |
| switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { | |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: | |
| /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */ | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; | |
| break; | |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: | |
| /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */ | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; | |
| break; | |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: | |
| if (opmode & IEEE80211_OPMODE_NOTIF_BW_160_80P80) | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | |
| else | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; | |
| break; | |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: | |
| /* legacy only, no longer used by newer spec */ | |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; | |
| break; | |
| } | |
| new_bw = ieee80211_sta_cur_vht_bw(link_sta); | |
| if (new_bw != link_sta->pub->bandwidth) { | |
| link_sta->pub->bandwidth = new_bw; | |
| sta_opmode.bw = ieee80211_sta_rx_bw_to_chan_width(link_sta); | |
| changed |= IEEE80211_RC_BW_CHANGED; | |
| sta_opmode.changed |= STA_OPMODE_MAX_BW_CHANGED; | |
| } | |
| if (sta_opmode.changed) | |
| cfg80211_sta_opmode_change_notify(sdata->dev, link_sta->addr, | |
| &sta_opmode, GFP_KERNEL); | |
| return changed; | |
| } | |
| void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_link_data *link, | |
| struct ieee80211_mgmt *mgmt) | |
| { | |
| struct ieee80211_bss_conf *link_conf = link->conf; | |
| if (!link_conf->mu_mimo_owner) | |
| return; | |
| if (!memcmp(mgmt->u.action.u.vht_group_notif.position, | |
| link_conf->mu_group.position, WLAN_USER_POSITION_LEN) && | |
| !memcmp(mgmt->u.action.u.vht_group_notif.membership, | |
| link_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN)) | |
| return; | |
| memcpy(link_conf->mu_group.membership, | |
| mgmt->u.action.u.vht_group_notif.membership, | |
| WLAN_MEMBERSHIP_LEN); | |
| memcpy(link_conf->mu_group.position, | |
| mgmt->u.action.u.vht_group_notif.position, | |
| WLAN_USER_POSITION_LEN); | |
| ieee80211_link_info_change_notify(sdata, link, | |
| BSS_CHANGED_MU_GROUPS); | |
| } | |
| void ieee80211_update_mu_groups(struct ieee80211_vif *vif, unsigned int link_id, | |
| const u8 *membership, const u8 *position) | |
| { | |
| struct ieee80211_bss_conf *link_conf; | |
| rcu_read_lock(); | |
| link_conf = rcu_dereference(vif->link_conf[link_id]); | |
| if (!WARN_ON_ONCE(!link_conf || !link_conf->mu_mimo_owner)) { | |
| memcpy(link_conf->mu_group.membership, membership, | |
| WLAN_MEMBERSHIP_LEN); | |
| memcpy(link_conf->mu_group.position, position, | |
| WLAN_USER_POSITION_LEN); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| EXPORT_SYMBOL_GPL(ieee80211_update_mu_groups); | |
| void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, | |
| struct link_sta_info *link_sta, | |
| u8 opmode, enum nl80211_band band) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; | |
| u32 changed = __ieee80211_vht_handle_opmode(sdata, link_sta, | |
| opmode, band); | |
| if (changed > 0) { | |
| ieee80211_recalc_min_chandef(sdata, link_sta->link_id); | |
| rate_control_rate_update(local, sband, link_sta, changed); | |
| } | |
| } | |
| void ieee80211_get_vht_mask_from_cap(__le16 vht_cap, | |
| u16 vht_mask[NL80211_VHT_NSS_MAX]) | |
| { | |
| int i; | |
| u16 mask, cap = le16_to_cpu(vht_cap); | |
| for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { | |
| mask = (cap >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; | |
| switch (mask) { | |
| case IEEE80211_VHT_MCS_SUPPORT_0_7: | |
| vht_mask[i] = 0x00FF; | |
| break; | |
| case IEEE80211_VHT_MCS_SUPPORT_0_8: | |
| vht_mask[i] = 0x01FF; | |
| break; | |
| case IEEE80211_VHT_MCS_SUPPORT_0_9: | |
| vht_mask[i] = 0x03FF; | |
| break; | |
| case IEEE80211_VHT_MCS_NOT_SUPPORTED: | |
| default: | |
| vht_mask[i] = 0; | |
| break; | |
| } | |
| } | |
| } |