| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * RTC driver for the Micro Crystal RV3032 | |
| * | |
| * Copyright (C) 2020 Micro Crystal SA | |
| * | |
| * Alexandre Belloni <alexandre.belloni@bootlin.com> | |
| * | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/bcd.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/log2.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/regmap.h> | |
| #include <linux/rtc.h> | |
| #define RV3032_SEC 0x01 | |
| #define RV3032_MIN 0x02 | |
| #define RV3032_HOUR 0x03 | |
| #define RV3032_WDAY 0x04 | |
| #define RV3032_DAY 0x05 | |
| #define RV3032_MONTH 0x06 | |
| #define RV3032_YEAR 0x07 | |
| #define RV3032_ALARM_MIN 0x08 | |
| #define RV3032_ALARM_HOUR 0x09 | |
| #define RV3032_ALARM_DAY 0x0A | |
| #define RV3032_STATUS 0x0D | |
| #define RV3032_TLSB 0x0E | |
| #define RV3032_TMSB 0x0F | |
| #define RV3032_CTRL1 0x10 | |
| #define RV3032_CTRL2 0x11 | |
| #define RV3032_CTRL3 0x12 | |
| #define RV3032_TS_CTRL 0x13 | |
| #define RV3032_CLK_IRQ 0x14 | |
| #define RV3032_EEPROM_ADDR 0x3D | |
| #define RV3032_EEPROM_DATA 0x3E | |
| #define RV3032_EEPROM_CMD 0x3F | |
| #define RV3032_RAM1 0x40 | |
| #define RV3032_PMU 0xC0 | |
| #define RV3032_OFFSET 0xC1 | |
| #define RV3032_CLKOUT1 0xC2 | |
| #define RV3032_CLKOUT2 0xC3 | |
| #define RV3032_TREF0 0xC4 | |
| #define RV3032_TREF1 0xC5 | |
| #define RV3032_STATUS_VLF BIT(0) | |
| #define RV3032_STATUS_PORF BIT(1) | |
| #define RV3032_STATUS_EVF BIT(2) | |
| #define RV3032_STATUS_AF BIT(3) | |
| #define RV3032_STATUS_TF BIT(4) | |
| #define RV3032_STATUS_UF BIT(5) | |
| #define RV3032_STATUS_TLF BIT(6) | |
| #define RV3032_STATUS_THF BIT(7) | |
| #define RV3032_TLSB_CLKF BIT(1) | |
| #define RV3032_TLSB_EEBUSY BIT(2) | |
| #define RV3032_TLSB_TEMP GENMASK(7, 4) | |
| #define RV3032_CLKOUT2_HFD_MSK GENMASK(4, 0) | |
| #define RV3032_CLKOUT2_FD_MSK GENMASK(6, 5) | |
| #define RV3032_CLKOUT2_OS BIT(7) | |
| #define RV3032_CTRL1_EERD BIT(2) | |
| #define RV3032_CTRL2_STOP BIT(0) | |
| #define RV3032_CTRL2_EIE BIT(2) | |
| #define RV3032_CTRL2_AIE BIT(3) | |
| #define RV3032_CTRL2_TIE BIT(4) | |
| #define RV3032_CTRL2_UIE BIT(5) | |
| #define RV3032_CTRL2_CLKIE BIT(6) | |
| #define RV3032_CTRL2_TSE BIT(7) | |
| #define RV3032_PMU_TCM GENMASK(1, 0) | |
| #define RV3032_PMU_TCR GENMASK(3, 2) | |
| #define RV3032_PMU_BSM GENMASK(5, 4) | |
| #define RV3032_PMU_NCLKE BIT(6) | |
| #define RV3032_PMU_BSM_DSM 1 | |
| #define RV3032_PMU_BSM_LSM 2 | |
| #define RV3032_OFFSET_MSK GENMASK(5, 0) | |
| #define RV3032_EVT_CTRL_TSR BIT(2) | |
| #define RV3032_EEPROM_CMD_UPDATE 0x11 | |
| #define RV3032_EEPROM_CMD_WRITE 0x21 | |
| #define RV3032_EEPROM_CMD_READ 0x22 | |
| #define RV3032_EEPROM_USER 0xCB | |
| #define RV3032_EEBUSY_POLL 10000 | |
| #define RV3032_EEBUSY_TIMEOUT 100000 | |
| #define OFFSET_STEP_PPT 238419 | |
| struct rv3032_data { | |
| struct regmap *regmap; | |
| struct rtc_device *rtc; | |
| bool trickle_charger_set; | |
| #ifdef CONFIG_COMMON_CLK | |
| struct clk_hw clkout_hw; | |
| #endif | |
| }; | |
| static u16 rv3032_trickle_resistors[] = {1000, 2000, 7000, 11000}; | |
| static u16 rv3032_trickle_voltages[] = {0, 1750, 3000, 4400}; | |
| static int rv3032_exit_eerd(struct rv3032_data *rv3032, u32 eerd) | |
| { | |
| if (eerd) | |
| return 0; | |
| return regmap_update_bits(rv3032->regmap, RV3032_CTRL1, RV3032_CTRL1_EERD, 0); | |
| } | |
| static int rv3032_enter_eerd(struct rv3032_data *rv3032, u32 *eerd) | |
| { | |
| u32 ctrl1, status; | |
| int ret; | |
| ret = regmap_read(rv3032->regmap, RV3032_CTRL1, &ctrl1); | |
| if (ret) | |
| return ret; | |
| *eerd = ctrl1 & RV3032_CTRL1_EERD; | |
| if (*eerd) | |
| return 0; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL1, | |
| RV3032_CTRL1_EERD, RV3032_CTRL1_EERD); | |
| if (ret) | |
| return ret; | |
| ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status, | |
| !(status & RV3032_TLSB_EEBUSY), | |
| RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| if (ret) { | |
| rv3032_exit_eerd(rv3032, *eerd); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int rv3032_update_cfg(struct rv3032_data *rv3032, unsigned int reg, | |
| unsigned int mask, unsigned int val) | |
| { | |
| u32 status, eerd; | |
| int ret; | |
| ret = rv3032_enter_eerd(rv3032, &eerd); | |
| if (ret) | |
| return ret; | |
| ret = regmap_update_bits(rv3032->regmap, reg, mask, val); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE); | |
| if (ret) | |
| goto exit_eerd; | |
| usleep_range(46000, RV3032_EEBUSY_TIMEOUT); | |
| ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status, | |
| !(status & RV3032_TLSB_EEBUSY), | |
| RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| exit_eerd: | |
| rv3032_exit_eerd(rv3032, eerd); | |
| return ret; | |
| } | |
| static irqreturn_t rv3032_handle_irq(int irq, void *dev_id) | |
| { | |
| struct rv3032_data *rv3032 = dev_id; | |
| unsigned long events = 0; | |
| u32 status = 0, ctrl = 0; | |
| if (regmap_read(rv3032->regmap, RV3032_STATUS, &status) < 0 || | |
| status == 0) { | |
| return IRQ_NONE; | |
| } | |
| if (status & RV3032_STATUS_TF) { | |
| status |= RV3032_STATUS_TF; | |
| ctrl |= RV3032_CTRL2_TIE; | |
| events |= RTC_PF; | |
| } | |
| if (status & RV3032_STATUS_AF) { | |
| status |= RV3032_STATUS_AF; | |
| ctrl |= RV3032_CTRL2_AIE; | |
| events |= RTC_AF; | |
| } | |
| if (status & RV3032_STATUS_UF) { | |
| status |= RV3032_STATUS_UF; | |
| ctrl |= RV3032_CTRL2_UIE; | |
| events |= RTC_UF; | |
| } | |
| if (events) { | |
| rtc_update_irq(rv3032->rtc, 1, events); | |
| regmap_update_bits(rv3032->regmap, RV3032_STATUS, status, 0); | |
| regmap_update_bits(rv3032->regmap, RV3032_CTRL2, ctrl, 0); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int rv3032_get_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| u8 date[7]; | |
| int ret, status; | |
| ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status); | |
| if (ret < 0) | |
| return ret; | |
| if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF)) | |
| return -EINVAL; | |
| ret = regmap_bulk_read(rv3032->regmap, RV3032_SEC, date, sizeof(date)); | |
| if (ret) | |
| return ret; | |
| tm->tm_sec = bcd2bin(date[0] & 0x7f); | |
| tm->tm_min = bcd2bin(date[1] & 0x7f); | |
| tm->tm_hour = bcd2bin(date[2] & 0x3f); | |
| tm->tm_wday = date[3] & 0x7; | |
| tm->tm_mday = bcd2bin(date[4] & 0x3f); | |
| tm->tm_mon = bcd2bin(date[5] & 0x1f) - 1; | |
| tm->tm_year = bcd2bin(date[6]) + 100; | |
| return 0; | |
| } | |
| static int rv3032_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| u8 date[7]; | |
| int ret; | |
| date[0] = bin2bcd(tm->tm_sec); | |
| date[1] = bin2bcd(tm->tm_min); | |
| date[2] = bin2bcd(tm->tm_hour); | |
| date[3] = tm->tm_wday; | |
| date[4] = bin2bcd(tm->tm_mday); | |
| date[5] = bin2bcd(tm->tm_mon + 1); | |
| date[6] = bin2bcd(tm->tm_year - 100); | |
| ret = regmap_bulk_write(rv3032->regmap, RV3032_SEC, date, | |
| sizeof(date)); | |
| if (ret) | |
| return ret; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS, | |
| RV3032_STATUS_PORF | RV3032_STATUS_VLF, 0); | |
| return ret; | |
| } | |
| static int rv3032_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| u8 alarmvals[3]; | |
| int status, ctrl, ret; | |
| ret = regmap_bulk_read(rv3032->regmap, RV3032_ALARM_MIN, alarmvals, | |
| sizeof(alarmvals)); | |
| if (ret) | |
| return ret; | |
| ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_read(rv3032->regmap, RV3032_CTRL2, &ctrl); | |
| if (ret < 0) | |
| return ret; | |
| alrm->time.tm_sec = 0; | |
| alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); | |
| alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); | |
| alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); | |
| alrm->enabled = !!(ctrl & RV3032_CTRL2_AIE); | |
| alrm->pending = (status & RV3032_STATUS_AF) && alrm->enabled; | |
| return 0; | |
| } | |
| static int rv3032_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| u8 alarmvals[3]; | |
| u8 ctrl = 0; | |
| int ret; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, | |
| RV3032_CTRL2_AIE | RV3032_CTRL2_UIE, 0); | |
| if (ret) | |
| return ret; | |
| alarmvals[0] = bin2bcd(alrm->time.tm_min); | |
| alarmvals[1] = bin2bcd(alrm->time.tm_hour); | |
| alarmvals[2] = bin2bcd(alrm->time.tm_mday); | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS, | |
| RV3032_STATUS_AF, 0); | |
| if (ret) | |
| return ret; | |
| ret = regmap_bulk_write(rv3032->regmap, RV3032_ALARM_MIN, alarmvals, | |
| sizeof(alarmvals)); | |
| if (ret) | |
| return ret; | |
| if (alrm->enabled) { | |
| if (rv3032->rtc->uie_rtctimer.enabled) | |
| ctrl |= RV3032_CTRL2_UIE; | |
| if (rv3032->rtc->aie_timer.enabled) | |
| ctrl |= RV3032_CTRL2_AIE; | |
| } | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, | |
| RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl); | |
| return ret; | |
| } | |
| static int rv3032_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| int ctrl = 0, ret; | |
| if (enabled) { | |
| if (rv3032->rtc->uie_rtctimer.enabled) | |
| ctrl |= RV3032_CTRL2_UIE; | |
| if (rv3032->rtc->aie_timer.enabled) | |
| ctrl |= RV3032_CTRL2_AIE; | |
| } | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS, | |
| RV3032_STATUS_AF | RV3032_STATUS_UF, 0); | |
| if (ret) | |
| return ret; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, | |
| RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static int rv3032_read_offset(struct device *dev, long *offset) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| int ret, value, steps; | |
| ret = regmap_read(rv3032->regmap, RV3032_OFFSET, &value); | |
| if (ret < 0) | |
| return ret; | |
| steps = sign_extend32(FIELD_GET(RV3032_OFFSET_MSK, value), 5); | |
| *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000); | |
| return 0; | |
| } | |
| static int rv3032_set_offset(struct device *dev, long offset) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| offset = clamp(offset, -7629L, 7391L) * 1000; | |
| offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT); | |
| return rv3032_update_cfg(rv3032, RV3032_OFFSET, RV3032_OFFSET_MSK, | |
| FIELD_PREP(RV3032_OFFSET_MSK, offset)); | |
| } | |
| static int rv3032_param_get(struct device *dev, struct rtc_param *param) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| int ret; | |
| switch(param->param) { | |
| u32 value; | |
| case RTC_PARAM_BACKUP_SWITCH_MODE: | |
| ret = regmap_read(rv3032->regmap, RV3032_PMU, &value); | |
| if (ret < 0) | |
| return ret; | |
| value = FIELD_GET(RV3032_PMU_BSM, value); | |
| switch(value) { | |
| case RV3032_PMU_BSM_DSM: | |
| param->uvalue = RTC_BSM_DIRECT; | |
| break; | |
| case RV3032_PMU_BSM_LSM: | |
| param->uvalue = RTC_BSM_LEVEL; | |
| break; | |
| default: | |
| param->uvalue = RTC_BSM_DISABLED; | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int rv3032_param_set(struct device *dev, struct rtc_param *param) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| switch(param->param) { | |
| u8 mode; | |
| case RTC_PARAM_BACKUP_SWITCH_MODE: | |
| if (rv3032->trickle_charger_set) | |
| return -EINVAL; | |
| switch (param->uvalue) { | |
| case RTC_BSM_DISABLED: | |
| mode = 0; | |
| break; | |
| case RTC_BSM_DIRECT: | |
| mode = RV3032_PMU_BSM_DSM; | |
| break; | |
| case RTC_BSM_LEVEL: | |
| mode = RV3032_PMU_BSM_LSM; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_BSM, | |
| FIELD_PREP(RV3032_PMU_BSM, mode)); | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int rv3032_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| int status, val = 0, ret = 0; | |
| switch (cmd) { | |
| case RTC_VL_READ: | |
| ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status); | |
| if (ret < 0) | |
| return ret; | |
| if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF)) | |
| val = RTC_VL_DATA_INVALID; | |
| return put_user(val, (unsigned int __user *)arg); | |
| default: | |
| return -ENOIOCTLCMD; | |
| } | |
| } | |
| static int rv3032_nvram_write(void *priv, unsigned int offset, void *val, size_t bytes) | |
| { | |
| return regmap_bulk_write(priv, RV3032_RAM1 + offset, val, bytes); | |
| } | |
| static int rv3032_nvram_read(void *priv, unsigned int offset, void *val, size_t bytes) | |
| { | |
| return regmap_bulk_read(priv, RV3032_RAM1 + offset, val, bytes); | |
| } | |
| static int rv3032_eeprom_write(void *priv, unsigned int offset, void *val, size_t bytes) | |
| { | |
| struct rv3032_data *rv3032 = priv; | |
| u32 status, eerd; | |
| int i, ret; | |
| u8 *buf = val; | |
| ret = rv3032_enter_eerd(rv3032, &eerd); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < bytes; i++) { | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR, | |
| RV3032_EEPROM_USER + offset + i); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_DATA, buf[i]); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, | |
| RV3032_EEPROM_CMD_WRITE); | |
| if (ret) | |
| goto exit_eerd; | |
| usleep_range(RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status, | |
| !(status & RV3032_TLSB_EEBUSY), | |
| RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| if (ret) | |
| goto exit_eerd; | |
| } | |
| exit_eerd: | |
| rv3032_exit_eerd(rv3032, eerd); | |
| return ret; | |
| } | |
| static int rv3032_eeprom_read(void *priv, unsigned int offset, void *val, size_t bytes) | |
| { | |
| struct rv3032_data *rv3032 = priv; | |
| u32 status, eerd, data; | |
| int i, ret; | |
| u8 *buf = val; | |
| ret = rv3032_enter_eerd(rv3032, &eerd); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < bytes; i++) { | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR, | |
| RV3032_EEPROM_USER + offset + i); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, | |
| RV3032_EEPROM_CMD_READ); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status, | |
| !(status & RV3032_TLSB_EEBUSY), | |
| RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_read(rv3032->regmap, RV3032_EEPROM_DATA, &data); | |
| if (ret) | |
| goto exit_eerd; | |
| buf[i] = data; | |
| } | |
| exit_eerd: | |
| rv3032_exit_eerd(rv3032, eerd); | |
| return ret; | |
| } | |
| static int rv3032_trickle_charger_setup(struct device *dev, struct rv3032_data *rv3032) | |
| { | |
| u32 val, ohms, voltage; | |
| int i; | |
| val = FIELD_PREP(RV3032_PMU_TCM, 1) | FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_DSM); | |
| if (!device_property_read_u32(dev, "trickle-voltage-millivolt", &voltage)) { | |
| for (i = 0; i < ARRAY_SIZE(rv3032_trickle_voltages); i++) | |
| if (voltage == rv3032_trickle_voltages[i]) | |
| break; | |
| if (i < ARRAY_SIZE(rv3032_trickle_voltages)) | |
| val = FIELD_PREP(RV3032_PMU_TCM, i) | | |
| FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_LSM); | |
| } | |
| if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms)) | |
| return 0; | |
| for (i = 0; i < ARRAY_SIZE(rv3032_trickle_resistors); i++) | |
| if (ohms == rv3032_trickle_resistors[i]) | |
| break; | |
| if (i >= ARRAY_SIZE(rv3032_trickle_resistors)) { | |
| dev_warn(dev, "invalid trickle resistor value\n"); | |
| return 0; | |
| } | |
| rv3032->trickle_charger_set = true; | |
| return rv3032_update_cfg(rv3032, RV3032_PMU, | |
| RV3032_PMU_TCR | RV3032_PMU_TCM | RV3032_PMU_BSM, | |
| val | FIELD_PREP(RV3032_PMU_TCR, i)); | |
| } | |
| #ifdef CONFIG_COMMON_CLK | |
| #define clkout_hw_to_rv3032(hw) container_of(hw, struct rv3032_data, clkout_hw) | |
| static int clkout_xtal_rates[] = { | |
| 32768, | |
| 1024, | |
| 64, | |
| 1, | |
| }; | |
| #define RV3032_HFD_STEP 8192 | |
| static unsigned long rv3032_clkout_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| int clkout, ret; | |
| struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw); | |
| ret = regmap_read(rv3032->regmap, RV3032_CLKOUT2, &clkout); | |
| if (ret < 0) | |
| return 0; | |
| if (clkout & RV3032_CLKOUT2_OS) { | |
| unsigned long rate = FIELD_GET(RV3032_CLKOUT2_HFD_MSK, clkout) << 8; | |
| ret = regmap_read(rv3032->regmap, RV3032_CLKOUT1, &clkout); | |
| if (ret < 0) | |
| return 0; | |
| rate += clkout + 1; | |
| return rate * RV3032_HFD_STEP; | |
| } | |
| return clkout_xtal_rates[FIELD_GET(RV3032_CLKOUT2_FD_MSK, clkout)]; | |
| } | |
| static int rv3032_clkout_determine_rate(struct clk_hw *hw, | |
| struct clk_rate_request *req) | |
| { | |
| int i, hfd; | |
| if (req->rate < RV3032_HFD_STEP) | |
| for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++) | |
| if (clkout_xtal_rates[i] <= req->rate) { | |
| req->rate = clkout_xtal_rates[i]; | |
| return 0; | |
| } | |
| hfd = DIV_ROUND_CLOSEST(req->rate, RV3032_HFD_STEP); | |
| req->rate = RV3032_HFD_STEP * clamp(hfd, 0, 8192); | |
| return 0; | |
| } | |
| static int rv3032_clkout_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw); | |
| u32 status, eerd; | |
| int i, hfd, ret; | |
| for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++) { | |
| if (clkout_xtal_rates[i] == rate) { | |
| return rv3032_update_cfg(rv3032, RV3032_CLKOUT2, 0xff, | |
| FIELD_PREP(RV3032_CLKOUT2_FD_MSK, i)); | |
| } | |
| } | |
| hfd = DIV_ROUND_CLOSEST(rate, RV3032_HFD_STEP); | |
| hfd = clamp(hfd, 1, 8192) - 1; | |
| ret = rv3032_enter_eerd(rv3032, &eerd); | |
| if (ret) | |
| return ret; | |
| ret = regmap_write(rv3032->regmap, RV3032_CLKOUT1, hfd & 0xff); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_CLKOUT2, RV3032_CLKOUT2_OS | | |
| FIELD_PREP(RV3032_CLKOUT2_HFD_MSK, hfd >> 8)); | |
| if (ret) | |
| goto exit_eerd; | |
| ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE); | |
| if (ret) | |
| goto exit_eerd; | |
| usleep_range(46000, RV3032_EEBUSY_TIMEOUT); | |
| ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status, | |
| !(status & RV3032_TLSB_EEBUSY), | |
| RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT); | |
| exit_eerd: | |
| rv3032_exit_eerd(rv3032, eerd); | |
| return ret; | |
| } | |
| static int rv3032_clkout_prepare(struct clk_hw *hw) | |
| { | |
| struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw); | |
| return rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, 0); | |
| } | |
| static void rv3032_clkout_unprepare(struct clk_hw *hw) | |
| { | |
| struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw); | |
| rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, RV3032_PMU_NCLKE); | |
| } | |
| static int rv3032_clkout_is_prepared(struct clk_hw *hw) | |
| { | |
| int val, ret; | |
| struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw); | |
| ret = regmap_read(rv3032->regmap, RV3032_PMU, &val); | |
| if (ret < 0) | |
| return ret; | |
| return !(val & RV3032_PMU_NCLKE); | |
| } | |
| static const struct clk_ops rv3032_clkout_ops = { | |
| .prepare = rv3032_clkout_prepare, | |
| .unprepare = rv3032_clkout_unprepare, | |
| .is_prepared = rv3032_clkout_is_prepared, | |
| .recalc_rate = rv3032_clkout_recalc_rate, | |
| .determine_rate = rv3032_clkout_determine_rate, | |
| .set_rate = rv3032_clkout_set_rate, | |
| }; | |
| static int rv3032_clkout_register_clk(struct rv3032_data *rv3032, | |
| struct i2c_client *client) | |
| { | |
| int ret; | |
| struct clk *clk; | |
| struct clk_init_data init; | |
| struct device_node *node = client->dev.of_node; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_TLSB, RV3032_TLSB_CLKF, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, RV3032_CTRL2_CLKIE, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_write(rv3032->regmap, RV3032_CLK_IRQ, 0); | |
| if (ret < 0) | |
| return ret; | |
| init.name = "rv3032-clkout"; | |
| init.ops = &rv3032_clkout_ops; | |
| init.flags = 0; | |
| init.parent_names = NULL; | |
| init.num_parents = 0; | |
| rv3032->clkout_hw.init = &init; | |
| of_property_read_string(node, "clock-output-names", &init.name); | |
| clk = devm_clk_register(&client->dev, &rv3032->clkout_hw); | |
| if (!IS_ERR(clk)) | |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); | |
| return 0; | |
| } | |
| #endif | |
| static int rv3032_hwmon_read_temp(struct device *dev, long *mC) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| u8 buf[2]; | |
| int temp, prev = 0; | |
| int ret; | |
| ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf)); | |
| if (ret) | |
| return ret; | |
| temp = sign_extend32(buf[1], 7) << 4; | |
| temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]); | |
| /* No blocking or shadowing on RV3032_TLSB and RV3032_TMSB */ | |
| do { | |
| prev = temp; | |
| ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf)); | |
| if (ret) | |
| return ret; | |
| temp = sign_extend32(buf[1], 7) << 4; | |
| temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]); | |
| } while (temp != prev); | |
| *mC = (temp * 1000) / 16; | |
| return 0; | |
| } | |
| static umode_t rv3032_hwmon_is_visible(const void *data, enum hwmon_sensor_types type, | |
| u32 attr, int channel) | |
| { | |
| if (type != hwmon_temp) | |
| return 0; | |
| switch (attr) { | |
| case hwmon_temp_input: | |
| return 0444; | |
| default: | |
| return 0; | |
| } | |
| } | |
| static int rv3032_hwmon_read(struct device *dev, enum hwmon_sensor_types type, | |
| u32 attr, int channel, long *temp) | |
| { | |
| int err; | |
| switch (attr) { | |
| case hwmon_temp_input: | |
| err = rv3032_hwmon_read_temp(dev, temp); | |
| break; | |
| default: | |
| err = -EOPNOTSUPP; | |
| break; | |
| } | |
| return err; | |
| } | |
| static const struct hwmon_channel_info * const rv3032_hwmon_info[] = { | |
| HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), | |
| HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), | |
| NULL | |
| }; | |
| static const struct hwmon_ops rv3032_hwmon_hwmon_ops = { | |
| .is_visible = rv3032_hwmon_is_visible, | |
| .read = rv3032_hwmon_read, | |
| }; | |
| static const struct hwmon_chip_info rv3032_hwmon_chip_info = { | |
| .ops = &rv3032_hwmon_hwmon_ops, | |
| .info = rv3032_hwmon_info, | |
| }; | |
| static void rv3032_hwmon_register(struct device *dev) | |
| { | |
| struct rv3032_data *rv3032 = dev_get_drvdata(dev); | |
| if (!IS_REACHABLE(CONFIG_HWMON)) | |
| return; | |
| devm_hwmon_device_register_with_info(dev, "rv3032", rv3032, &rv3032_hwmon_chip_info, NULL); | |
| } | |
| static const struct rtc_class_ops rv3032_rtc_ops = { | |
| .read_time = rv3032_get_time, | |
| .set_time = rv3032_set_time, | |
| .read_offset = rv3032_read_offset, | |
| .set_offset = rv3032_set_offset, | |
| .ioctl = rv3032_ioctl, | |
| .read_alarm = rv3032_get_alarm, | |
| .set_alarm = rv3032_set_alarm, | |
| .alarm_irq_enable = rv3032_alarm_irq_enable, | |
| .param_get = rv3032_param_get, | |
| .param_set = rv3032_param_set, | |
| }; | |
| static const struct regmap_config regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = 0xCA, | |
| }; | |
| static int rv3032_probe(struct i2c_client *client) | |
| { | |
| struct rv3032_data *rv3032; | |
| int ret, status; | |
| struct nvmem_config nvmem_cfg = { | |
| .name = "rv3032_nvram", | |
| .word_size = 1, | |
| .stride = 1, | |
| .size = 16, | |
| .type = NVMEM_TYPE_BATTERY_BACKED, | |
| .reg_read = rv3032_nvram_read, | |
| .reg_write = rv3032_nvram_write, | |
| }; | |
| struct nvmem_config eeprom_cfg = { | |
| .name = "rv3032_eeprom", | |
| .word_size = 1, | |
| .stride = 1, | |
| .size = 32, | |
| .type = NVMEM_TYPE_EEPROM, | |
| .reg_read = rv3032_eeprom_read, | |
| .reg_write = rv3032_eeprom_write, | |
| }; | |
| rv3032 = devm_kzalloc(&client->dev, sizeof(struct rv3032_data), | |
| GFP_KERNEL); | |
| if (!rv3032) | |
| return -ENOMEM; | |
| rv3032->regmap = devm_regmap_init_i2c(client, ®map_config); | |
| if (IS_ERR(rv3032->regmap)) | |
| return PTR_ERR(rv3032->regmap); | |
| i2c_set_clientdata(client, rv3032); | |
| ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status); | |
| if (ret < 0) | |
| return ret; | |
| rv3032->rtc = devm_rtc_allocate_device(&client->dev); | |
| if (IS_ERR(rv3032->rtc)) | |
| return PTR_ERR(rv3032->rtc); | |
| if (client->irq > 0) { | |
| unsigned long irqflags = IRQF_TRIGGER_LOW; | |
| if (dev_fwnode(&client->dev)) | |
| irqflags = 0; | |
| ret = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, rv3032_handle_irq, | |
| irqflags | IRQF_ONESHOT, | |
| "rv3032", rv3032); | |
| if (ret) { | |
| dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); | |
| client->irq = 0; | |
| } | |
| } | |
| if (!client->irq) | |
| clear_bit(RTC_FEATURE_ALARM, rv3032->rtc->features); | |
| rv3032_trickle_charger_setup(&client->dev, rv3032); | |
| set_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rv3032->rtc->features); | |
| set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rv3032->rtc->features); | |
| rv3032->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; | |
| rv3032->rtc->range_max = RTC_TIMESTAMP_END_2099; | |
| rv3032->rtc->ops = &rv3032_rtc_ops; | |
| ret = devm_rtc_register_device(rv3032->rtc); | |
| if (ret) | |
| return ret; | |
| nvmem_cfg.priv = rv3032->regmap; | |
| devm_rtc_nvmem_register(rv3032->rtc, &nvmem_cfg); | |
| eeprom_cfg.priv = rv3032; | |
| devm_rtc_nvmem_register(rv3032->rtc, &eeprom_cfg); | |
| #ifdef CONFIG_COMMON_CLK | |
| rv3032_clkout_register_clk(rv3032, client); | |
| #endif | |
| rv3032_hwmon_register(&client->dev); | |
| return 0; | |
| } | |
| static const struct acpi_device_id rv3032_i2c_acpi_match[] = { | |
| { "MCRY3032" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, rv3032_i2c_acpi_match); | |
| static const __maybe_unused struct of_device_id rv3032_of_match[] = { | |
| { .compatible = "microcrystal,rv3032", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, rv3032_of_match); | |
| static struct i2c_driver rv3032_driver = { | |
| .driver = { | |
| .name = "rtc-rv3032", | |
| .acpi_match_table = rv3032_i2c_acpi_match, | |
| .of_match_table = of_match_ptr(rv3032_of_match), | |
| }, | |
| .probe = rv3032_probe, | |
| }; | |
| module_i2c_driver(rv3032_driver); | |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); | |
| MODULE_DESCRIPTION("Micro Crystal RV3032 RTC driver"); | |
| MODULE_LICENSE("GPL v2"); |