arch/arm/boot/dts/imx6q-h100.dts - third_party/linux - Git at Google

 /*
  * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;

 #include "imx6q.dtsi"
 #include "imx6qdl-sr-som.dtsi"
 #include "imx6qdl-sr-som-brcm.dtsi"

 / {
 	model = "Auvidea H100";
 	compatible = "auvidea,h100", "fsl,imx6q";

 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		reg = <0x10000000 0>;
 	};

 	aliases {
 		rtc0 = &rtc;
 		rtc1 = &snvs_rtc;
 	};

 	chosen {
 		stdout-path = &uart2;
 	};

 	hdmi_osc: hdmi-osc {
 		compatible = "fixed-clock";
 		clock-output-names = "hdmi-osc";
 		clock-frequency = <27000000>;
 		#clock-cells = <0>;
 	};

 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_leds>;

 		led0: power {
 			label = "power";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};

 		led1: stream {
 			label = "stream";
 			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};

 		led2: rec {
 			label = "rec";
 			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};

 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	reg_hdmi: regulator-hdmi {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 		regulator-name = "V_HDMI";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};

 	reg_usbh1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
 		regulator-name = "USB_H1_VBUS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};

 	reg_usbotg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
 		regulator-name = "USB_OTG_VBUS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};

 	sound-sgtl5000 {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "H100 on-board codec";
 		audio-codec = <&sgtl5000>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
 		mux-ext-port = <5>;
 		mux-int-port = <1>;
 		ssi-controller = <&ssi1>;
 	};
 };

 &audmux {
 	status = "okay";
 };

 &hdmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_h100_hdmi>;
 	ddc-i2c-bus = <&i2c2>;
 	status = "okay";
 };

 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_h100_i2c1>;
 	status = "okay";

 	eeprom: 24c02@51 {
 		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x51>;
 	};

 	rtc: pcf8523@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};

 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};

 	tc358743: tc358743@f {
 		compatible = "toshiba,tc358743";
 		reg = <0x0f>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_tc358743>;
 		clocks = <&hdmi_osc>;
 		clock-names = "refclk";
 		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
 		/* IRQ has a wrong pull resistor which renders it useless  */

 		port {
 			tc358743_out: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
 				data-lanes = <1 2 3 4>;
 				clock-lanes = <0>;
 				clock-noncontinuous;
 				link-frequencies = /bits/ 64 <297000000>;
 			};
 		};
 	};
 };

 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_h100_i2c2>;
 	status = "okay";
 };

 &iomuxc {
 	h100 {
 		pinctrl_h100_hdmi: h100-hdmi {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
 			>;
 		};

 		pinctrl_h100_i2c1: h100-i2c1 {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
 			>;
 		};

 		pinctrl_h100_i2c2: h100-i2c2 {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
 				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
 			>;
 		};

 		pinctrl_h100_leds: pinctrl-h100-leds {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
 				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
 				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
 			>;
 		};

 		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
 			>;
 		};

 		pinctrl_h100_sgtl5000: h100-sgtl5000 {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
 				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
 				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
 				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
 				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 			>;
 		};

 		pinctrl_h100_tc358743: h100-tc358743 {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
 			>;
 		};

 		pinctrl_h100_uart2: h100-uart2 {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
 				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
 			>;
 		};

 		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
 			>;
 		};

 		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
 			>;
 		};

 		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
 			>;
 		};

 		pinctrl_h100_usdhc2: h100-usdhc2 {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
 				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
 				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
 				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
 				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
 			>;
 		};

 		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
 				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
 				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
 				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
 				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
 			>;
 		};

 		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
 				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
 				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
 				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
 				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
 			>;
 		};
 	};
 };

 &mipi_csi {
 	status = "okay";

 	port {
 		mipi_csi2_in: endpoint {
 			remote-endpoint = <&tc358743_out>;
 			data-lanes = <1 2 3 4>;
 			clock-lanes = <0>;
 			clock-noncontinuous;
 			link-frequencies = /bits/ 64 <297000000>;
 		};
 	};
 };

 &ssi1 {
 	status = "okay";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_h100_uart2>;
 	status = "okay";
 };

 &usbh1 {
 	disable-over-current;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };

 &usbotg {
 	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
 	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };

 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_h100_usdhc2>;
 	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
 	vmmc-supply = <&reg_3p3v>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
	/*
	* Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;

	#include "imx6q.dtsi"
	#include "imx6qdl-sr-som.dtsi"
	#include "imx6qdl-sr-som-brcm.dtsi"

	/ {
	model = "Auvidea H100";
	compatible = "auvidea,h100", "fsl,imx6q";

	/* Will be filled by the bootloader */
	memory@10000000 {
	reg = <0x10000000 0>;
	};

	aliases {
	rtc0 = &rtc;
	rtc1 = &snvs_rtc;
	};

	chosen {
	stdout-path = &uart2;
	};

	hdmi_osc: hdmi-osc {
	compatible = "fixed-clock";
	clock-output-names = "hdmi-osc";
	clock-frequency = <27000000>;
	#clock-cells = <0>;
	};

	leds {
	compatible = "gpio-leds";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_leds>;

	led0: power {
	label = "power";
	gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	default-state = "on";
	};

	led1: stream {
	label = "stream";
	gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
	default-state = "off";
	};

	led2: rec {
	label = "rec";
	gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
	default-state = "off";
	};
	};

	reg_3p3v: regulator-3p3v {
	compatible = "regulator-fixed";
	regulator-name = "3P3V";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	reg_hdmi: regulator-hdmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
	compatible = "regulator-fixed";
	enable-active-high;
	gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
	regulator-name = "V_HDMI";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-always-on;
	};

	reg_usbh1_vbus: regulator-usb-h1-vbus {
	compatible = "regulator-fixed";
	enable-active-high;
	gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
	regulator-name = "USB_H1_VBUS";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	};

	reg_usbotg_vbus: regulator-usb-otg-vbus {
	compatible = "regulator-fixed";
	enable-active-high;
	gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
	regulator-name = "USB_OTG_VBUS";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	};

	sound-sgtl5000 {
	compatible = "fsl,imx-audio-sgtl5000";
	model = "H100 on-board codec";
	audio-codec = <&sgtl5000>;
	audio-routing =
	"MIC_IN", "Mic Jack",
	"Mic Jack", "Mic Bias",
	"Headphone Jack", "HP_OUT";
	mux-ext-port = <5>;
	mux-int-port = <1>;
	ssi-controller = <&ssi1>;
	};
	};

	&audmux {
	status = "okay";
	};

	&hdmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_hdmi>;
	ddc-i2c-bus = <&i2c2>;
	status = "okay";
	};

	&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_i2c1>;
	status = "okay";

	eeprom: 24c02@51 {
	compatible = "microchip,24c02", "atmel,24c02";
	reg = <0x51>;
	};

	rtc: pcf8523@68 {
	compatible = "nxp,pcf8523";
	reg = <0x68>;
	};

	sgtl5000: sgtl5000@a {
	compatible = "fsl,sgtl5000";
	reg = <0x0a>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_sgtl5000>;
	clocks = <&clks IMX6QDL_CLK_CKO>;
	VDDA-supply = <&reg_3p3v>;
	VDDIO-supply = <&reg_3p3v>;
	};

	tc358743: tc358743@f {
	compatible = "toshiba,tc358743";
	reg = <0x0f>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_tc358743>;
	clocks = <&hdmi_osc>;
	clock-names = "refclk";
	reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
	/* IRQ has a wrong pull resistor which renders it useless */

	port {
	tc358743_out: endpoint {
	remote-endpoint = <&mipi_csi2_in>;
	data-lanes = <1 2 3 4>;
	clock-lanes = <0>;
	clock-noncontinuous;
	link-frequencies = /bits/ 64 <297000000>;
	};
	};
	};
	};

	&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_i2c2>;
	status = "okay";
	};

	&iomuxc {
	h100 {
	pinctrl_h100_hdmi: h100-hdmi {
	fsl,pins = <
	MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
	>;
	};

	pinctrl_h100_i2c1: h100-i2c1 {
	fsl,pins = <
	MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
	MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
	>;
	};

	pinctrl_h100_i2c2: h100-i2c2 {
	fsl,pins = <
	MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
	MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
	>;
	};

	pinctrl_h100_leds: pinctrl-h100-leds {
	fsl,pins = <
	MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0
	MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
	MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
	>;
	};

	pinctrl_h100_reg_hdmi: h100-reg-hdmi {
	fsl,pins = <
	MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
	>;
	};

	pinctrl_h100_sgtl5000: h100-sgtl5000 {
	fsl,pins = <
	MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
	MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
	MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
	MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
	MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
	>;
	};

	pinctrl_h100_tc358743: h100-tc358743 {
	fsl,pins = <
	MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
	>;
	};

	pinctrl_h100_uart2: h100-uart2 {
	fsl,pins = <
	MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
	MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
	>;
	};

	pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
	fsl,pins = <
	MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
	>;
	};

	pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
	fsl,pins = <
	MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
	>;
	};

	pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
	fsl,pins = <
	MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
	>;
	};

	pinctrl_h100_usdhc2: h100-usdhc2 {
	fsl,pins = <
	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
	MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0
	>;
	};

	pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
	fsl,pins = <
	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
	MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0
	>;
	};

	pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
	fsl,pins = <
	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
	MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b0b0
	>;
	};
	};
	};

	&mipi_csi {
	status = "okay";

	port {
	mipi_csi2_in: endpoint {
	remote-endpoint = <&tc358743_out>;
	data-lanes = <1 2 3 4>;
	clock-lanes = <0>;
	clock-noncontinuous;
	link-frequencies = /bits/ 64 <297000000>;
	};
	};
	};

	&ssi1 {
	status = "okay";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_uart2>;
	status = "okay";
	};

	&usbh1 {
	disable-over-current;
	vbus-supply = <&reg_usbh1_vbus>;
	status = "okay";
	};

	&usbotg {
	disable-over-current;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
	vbus-supply = <&reg_usbotg_vbus>;
	status = "okay";
	};

	&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_h100_usdhc2>;
	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
	vmmc-supply = <&reg_3p3v>;
	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	status = "okay";
	};