| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Raspberry Pi firmware based touchscreen driver | |
| * | |
| * Copyright (C) 2015, 2017 Raspberry Pi | |
| * Copyright (C) 2018 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> | |
| */ | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <linux/slab.h> | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/bitops.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/input.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/input/touchscreen.h> | |
| #include <soc/bcm2835/raspberrypi-firmware.h> | |
| #define RPI_TS_DEFAULT_WIDTH 800 | |
| #define RPI_TS_DEFAULT_HEIGHT 480 | |
| #define RPI_TS_MAX_SUPPORTED_POINTS 10 | |
| #define RPI_TS_FTS_TOUCH_DOWN 0 | |
| #define RPI_TS_FTS_TOUCH_CONTACT 2 | |
| #define RPI_TS_POLL_INTERVAL 17 /* 60fps */ | |
| #define RPI_TS_NPOINTS_REG_INVALIDATE 99 | |
| struct rpi_ts { | |
| struct platform_device *pdev; | |
| struct input_dev *input; | |
| struct touchscreen_properties prop; | |
| void __iomem *fw_regs_va; | |
| dma_addr_t fw_regs_phys; | |
| int known_ids; | |
| }; | |
| struct rpi_ts_regs { | |
| u8 device_mode; | |
| u8 gesture_id; | |
| u8 num_points; | |
| struct rpi_ts_touch { | |
| u8 xh; | |
| u8 xl; | |
| u8 yh; | |
| u8 yl; | |
| u8 pressure; /* Not supported */ | |
| u8 area; /* Not supported */ | |
| } point[RPI_TS_MAX_SUPPORTED_POINTS]; | |
| }; | |
| static void rpi_ts_poll(struct input_dev *input) | |
| { | |
| struct rpi_ts *ts = input_get_drvdata(input); | |
| struct rpi_ts_regs regs; | |
| int modified_ids = 0; | |
| long released_ids; | |
| int event_type; | |
| int touchid; | |
| int x, y; | |
| int i; | |
| memcpy_fromio(®s, ts->fw_regs_va, sizeof(regs)); | |
| /* | |
| * We poll the memory based register copy of the touchscreen chip using | |
| * the number of points register to know whether the copy has been | |
| * updated (we write 99 to the memory copy, the GPU will write between | |
| * 0 - 10 points) | |
| */ | |
| iowrite8(RPI_TS_NPOINTS_REG_INVALIDATE, | |
| ts->fw_regs_va + offsetof(struct rpi_ts_regs, num_points)); | |
| if (regs.num_points == RPI_TS_NPOINTS_REG_INVALIDATE || | |
| (regs.num_points == 0 && ts->known_ids == 0)) | |
| return; | |
| for (i = 0; i < regs.num_points; i++) { | |
| x = (((int)regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; | |
| y = (((int)regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; | |
| touchid = (regs.point[i].yh >> 4) & 0xf; | |
| event_type = (regs.point[i].xh >> 6) & 0x03; | |
| modified_ids |= BIT(touchid); | |
| if (event_type == RPI_TS_FTS_TOUCH_DOWN || | |
| event_type == RPI_TS_FTS_TOUCH_CONTACT) { | |
| input_mt_slot(input, touchid); | |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); | |
| touchscreen_report_pos(input, &ts->prop, x, y, true); | |
| } | |
| } | |
| released_ids = ts->known_ids & ~modified_ids; | |
| for_each_set_bit(i, &released_ids, RPI_TS_MAX_SUPPORTED_POINTS) { | |
| input_mt_slot(input, i); | |
| input_mt_report_slot_inactive(input); | |
| modified_ids &= ~(BIT(i)); | |
| } | |
| ts->known_ids = modified_ids; | |
| input_mt_sync_frame(input); | |
| input_sync(input); | |
| } | |
| static void rpi_ts_dma_cleanup(void *data) | |
| { | |
| struct rpi_ts *ts = data; | |
| struct device *dev = &ts->pdev->dev; | |
| dma_free_coherent(dev, PAGE_SIZE, ts->fw_regs_va, ts->fw_regs_phys); | |
| } | |
| static int rpi_ts_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct input_dev *input; | |
| struct rpi_firmware *fw; | |
| struct rpi_ts *ts; | |
| u32 touchbuf; | |
| int error; | |
| struct device_node *fw_node __free(device_node) = of_get_parent(np); | |
| if (!fw_node) { | |
| dev_err(dev, "Missing firmware node\n"); | |
| return -ENOENT; | |
| } | |
| fw = devm_rpi_firmware_get(&pdev->dev, fw_node); | |
| if (!fw) | |
| return -EPROBE_DEFER; | |
| ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); | |
| if (!ts) | |
| return -ENOMEM; | |
| ts->pdev = pdev; | |
| ts->fw_regs_va = dma_alloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys, | |
| GFP_KERNEL); | |
| if (!ts->fw_regs_va) { | |
| dev_err(dev, "failed to dma_alloc_coherent\n"); | |
| return -ENOMEM; | |
| } | |
| error = devm_add_action_or_reset(dev, rpi_ts_dma_cleanup, ts); | |
| if (error) { | |
| dev_err(dev, "failed to devm_add_action_or_reset, %d\n", error); | |
| return error; | |
| } | |
| touchbuf = (u32)ts->fw_regs_phys; | |
| error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, | |
| &touchbuf, sizeof(touchbuf)); | |
| if (error || touchbuf != 0) { | |
| dev_warn(dev, "Failed to set touchbuf, %d\n", error); | |
| return error; | |
| } | |
| input = devm_input_allocate_device(dev); | |
| if (!input) { | |
| dev_err(dev, "Failed to allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| ts->input = input; | |
| input_set_drvdata(input, ts); | |
| input->name = "raspberrypi-ts"; | |
| input->id.bustype = BUS_HOST; | |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, | |
| RPI_TS_DEFAULT_WIDTH, 0, 0); | |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, | |
| RPI_TS_DEFAULT_HEIGHT, 0, 0); | |
| touchscreen_parse_properties(input, true, &ts->prop); | |
| error = input_mt_init_slots(input, RPI_TS_MAX_SUPPORTED_POINTS, | |
| INPUT_MT_DIRECT); | |
| if (error) { | |
| dev_err(dev, "could not init mt slots, %d\n", error); | |
| return error; | |
| } | |
| error = input_setup_polling(input, rpi_ts_poll); | |
| if (error) { | |
| dev_err(dev, "could not set up polling mode, %d\n", error); | |
| return error; | |
| } | |
| input_set_poll_interval(input, RPI_TS_POLL_INTERVAL); | |
| error = input_register_device(input); | |
| if (error) { | |
| dev_err(dev, "could not register input device, %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id rpi_ts_match[] = { | |
| { .compatible = "raspberrypi,firmware-ts", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, rpi_ts_match); | |
| static struct platform_driver rpi_ts_driver = { | |
| .driver = { | |
| .name = "raspberrypi-ts", | |
| .of_match_table = rpi_ts_match, | |
| }, | |
| .probe = rpi_ts_probe, | |
| }; | |
| module_platform_driver(rpi_ts_driver); | |
| MODULE_AUTHOR("Gordon Hollingworth"); | |
| MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); | |
| MODULE_DESCRIPTION("Raspberry Pi firmware based touchscreen driver"); | |
| MODULE_LICENSE("GPL v2"); |