blob: 63a501c63cf8e1a1e6ebe2b12e5b7439032aec9d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Qualcomm MSM8660";
compatible = "qcom,msm8660";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "qcom,scorpion";
enable-method = "qcom,gcc-msm8660";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "qcom,scorpion";
enable-method = "qcom,gcc-msm8660";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
cpu-pmu {
compatible = "qcom,scorpion-mp-pmu";
interrupts = <1 9 0x304>;
};
clocks {
cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
pxo_board: pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
/*
* These channels from the ADC are simply hardware monitors.
* That is why the ADC is referred to as "HKADC" - HouseKeeping
* ADC.
*/
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&xoadc 0x00 0x01>, /* Battery */
<&xoadc 0x00 0x02>, /* DC in (charger) */
<&xoadc 0x00 0x04>, /* VPH the main system voltage */
<&xoadc 0x00 0x0b>, /* Die temperature */
<&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
<&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
<&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 0 0x301>,
<1 1 0x301>,
<1 2 0x301>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x40000>;
};
tlmm: pinctrl@800000 {
compatible = "qcom,msm8660-pinctrl";
reg = <0x800000 0x4000>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 173>;
#gpio-cells = <2>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8660";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
gsbi6: gsbi@16500000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <12>;
reg = <0x16500000 0x100>;
clocks = <&gcc GSBI6_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
syscon-tcsr = <&tcsr>;
gsbi6_serial: serial@16540000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x1000>,
<0x16500000 0x1000>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
gsbi6_i2c: i2c@16580000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16580000 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gsbi7: gsbi@16600000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <12>;
reg = <0x16600000 0x100>;
clocks = <&gcc GSBI7_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
syscon-tcsr = <&tcsr>;
gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
gsbi7_i2c: i2c@16680000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16680000 0x1000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gsbi8: gsbi@19800000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <12>;
reg = <0x19800000 0x100>;
clocks = <&gcc GSBI8_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
status = "disabled";
gsbi8_i2c: i2c@19880000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19880000 0x1000>;
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gsbi12: gsbi@19c00000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <12>;
reg = <0x19c00000 0x100>;
clocks = <&gcc GSBI12_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
gsbi12_serial: serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
gsbi12_i2c: i2c@19c80000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x19c80000 0x1000>;
interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
external-bus@1a100000 {
compatible = "qcom,msm8660-ebi2";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0x0 0x1a800000 0x00800000>,
<1 0x0 0x1b000000 0x00800000>,
<2 0x0 0x1b800000 0x00800000>,
<3 0x0 0x1d000000 0x08000000>,
<4 0x0 0x1c800000 0x00800000>,
<5 0x0 0x1c000000 0x00800000>;
reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
reg-names = "ebi2", "xmem";
clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
clock-names = "ebi2x", "ebi2";
status = "disabled";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
pm8058: pmic@0 {
compatible = "qcom,pm8058";
interrupt-parent = <&tlmm>;
interrupts = <88 8>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
pm8058_gpio: gpio@150 {
compatible = "qcom,pm8058-gpio",
"qcom,ssbi-gpio";
reg = <0x150>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
gpio-ranges = <&pm8058_gpio 0 0 44>;
#gpio-cells = <2>;
};
pm8058_mpps: mpps@50 {
compatible = "qcom,pm8058-mpp",
"qcom,ssbi-mpp";
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pm8058_mpps 0 0 12>;
interrupt-controller;
#interrupt-cells = <2>;
};
pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
interrupt-parent = <&pm8058>;
interrupts = <50 1>, <51 1>;
debounce = <15625>;
pull-up;
};
keypad@148 {
compatible = "qcom,pm8058-keypad";
reg = <0x148>;
interrupt-parent = <&pm8058>;
interrupts = <74 1>, <75 1>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
};
xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
#address-cells = <2>;
#size-cells = <0>;
#io-channel-cells = <2>;
vcoin: adc-channel@0 {
reg = <0x00 0x00>;
};
vbat: adc-channel@1 {
reg = <0x00 0x01>;
};
dcin: adc-channel@2 {
reg = <0x00 0x02>;
};
ichg: adc-channel@3 {
reg = <0x00 0x03>;
};
vph_pwr: adc-channel@4 {
reg = <0x00 0x04>;
};
usb_vbus: adc-channel@a {
reg = <0x00 0x0a>;
};
die_temp: adc-channel@b {
reg = <0x00 0x0b>;
};
ref_625mv: adc-channel@c {
reg = <0x00 0x0c>;
};
ref_1250mv: adc-channel@d {
reg = <0x00 0x0d>;
};
ref_325mv: adc-channel@e {
reg = <0x00 0x0e>;
};
ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
};
};
rtc@1e8 {
compatible = "qcom,pm8058-rtc";
reg = <0x1e8>;
interrupt-parent = <&pm8058>;
interrupts = <39 1>;
allow-set-time;
};
vibrator@4a {
compatible = "qcom,pm8058-vib";
reg = <0x4a>;
};
};
};
l2cc: clock-controller@2082000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x02082000 0x1000>;
};
rpm: rpm@104000 {
compatible = "qcom,rpm-msm8660";
reg = <0x00104000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
clock-names = "ram";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&pxo_board>;
clock-names = "pxo";
};
pm8901-regulators {
compatible = "qcom,rpm-pm8901-regulators";
pm8901_l0: l0 {};
pm8901_l1: l1 {};
pm8901_l2: l2 {};
pm8901_l3: l3 {};
pm8901_l4: l4 {};
pm8901_l5: l5 {};
pm8901_l6: l6 {};
/* S0 and S1 Handled as SAW regulators by SPM */
pm8901_s2: s2 {};
pm8901_s3: s3 {};
pm8901_s4: s4 {};
pm8901_lvs0: lvs0 {};
pm8901_lvs1: lvs1 {};
pm8901_lvs2: lvs2 {};
pm8901_lvs3: lvs3 {};
pm8901_mvs: mvs {};
};
pm8058-regulators {
compatible = "qcom,rpm-pm8058-regulators";
pm8058_l0: l0 {};
pm8058_l1: l1 {};
pm8058_l2: l2 {};
pm8058_l3: l3 {};
pm8058_l4: l4 {};
pm8058_l5: l5 {};
pm8058_l6: l6 {};
pm8058_l7: l7 {};
pm8058_l8: l8 {};
pm8058_l9: l9 {};
pm8058_l10: l10 {};
pm8058_l11: l11 {};
pm8058_l12: l12 {};
pm8058_l13: l13 {};
pm8058_l14: l14 {};
pm8058_l15: l15 {};
pm8058_l16: l16 {};
pm8058_l17: l17 {};
pm8058_l18: l18 {};
pm8058_l19: l19 {};
pm8058_l20: l20 {};
pm8058_l21: l21 {};
pm8058_l22: l22 {};
pm8058_l23: l23 {};
pm8058_l24: l24 {};
pm8058_l25: l25 {};
pm8058_s0: s0 {};
pm8058_s1: s1 {};
pm8058_s2: s2 {};
pm8058_s3: s3 {};
pm8058_s4: s4 {};
pm8058_lvs0: lvs0 {};
pm8058_lvs1: lvs1 {};
pm8058_ncp: ncp {};
};
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc2: mmc@12140000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12140000 0x8000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
no-1-8-v;
};
sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x121c0000 0x8000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc5: mmc@12200000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12200000 0x8000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
};
};
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-msm8660", "syscon";
reg = <0x1a400000 0x100>;
};
};
};