blob: 0bf8187134227eb99c646a5a00314f821b0d88e2 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
*
* Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
*
* Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
*
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/microchip,lan966x.h>
/ {
model = "Microchip LAN966 family SoC";
compatible = "microchip,lan966";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
clock-frequency = <600000000>;
reg = <0x0>;
};
};
clocks {
sys_clk: sys_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <165625000>;
};
cpu_clk: cpu_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <600000000>;
};
ddr_clk: ddr_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <300000000>;
};
nic_clk: nic_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
};
};
clks: clock-controller@e00c00a8 {
compatible = "microchip,lan966x-gck";
#clock-cells = <1>;
clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
clock-names = "cpu", "ddr", "sys";
reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
};
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <37500000>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
udc: usb@200000 {
compatible = "microchip,lan9662-udc",
"atmel,sama5d3-udc";
reg = <0x00200000 0x80000>,
<0xe0808000 0x400>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
clock-names = "pclk", "hclk";
status = "disabled";
};
switch: switch@e0000000 {
compatible = "microchip,lan966x-switch";
reg = <0xe0000000 0x0100000>,
<0xe2000000 0x0800000>;
reg-names = "cpu", "gcb";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "xtr", "fdma", "ana", "ptp",
"ptp-ext";
resets = <&reset 0>;
reset-names = "switch";
status = "disabled";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
status = "disabled";
};
port1: port@1 {
reg = <1>;
status = "disabled";
};
port2: port@2 {
reg = <2>;
status = "disabled";
};
port3: port@3 {
reg = <3>;
status = "disabled";
};
port4: port@4 {
reg = <4>;
status = "disabled";
};
port5: port@5 {
reg = <5>;
status = "disabled";
};
port6: port@6 {
reg = <6>;
status = "disabled";
};
port7: port@7 {
reg = <7>;
status = "disabled";
};
};
};
flx0: flexcom@e0040000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0040000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM0>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0040000 0x800>;
status = "disabled";
usart0: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
<&dma0 AT91_XDMAC_DT_PERID(2)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
spi0: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
<&dma0 AT91_XDMAC_DT_PERID(2)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "spi_clk";
atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c0: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
<&dma0 AT91_XDMAC_DT_PERID(2)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
flx1: flexcom@e0044000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0044000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0044000 0x800>;
status = "disabled";
usart1: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
<&dma0 AT91_XDMAC_DT_PERID(4)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
spi1: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
<&dma0 AT91_XDMAC_DT_PERID(4)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "spi_clk";
atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
<&dma0 AT91_XDMAC_DT_PERID(4)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
trng: rng@e0048000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xe0048000 0x100>;
clocks = <&nic_clk>;
};
aes: crypto@e004c000 {
compatible = "atmel,at91sam9g46-aes";
reg = <0xe004c000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
<&dma0 AT91_XDMAC_DT_PERID(13)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "aes_clk";
};
flx2: flexcom@e0060000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0060000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM2>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0060000 0x800>;
status = "disabled";
usart2: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(6)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
spi2: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(6)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "spi_clk";
atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(6)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
flx3: flexcom@e0064000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0064000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM3>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0064000 0x800>;
status = "disabled";
usart3: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
spi3: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "spi_clk";
atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
dma0: dma-controller@e0068000 {
compatible = "microchip,sama7g5-dma";
reg = <0xe0068000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
clocks = <&nic_clk>;
clock-names = "dma_clk";
};
sha: crypto@e006c000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xe006c000 0xec>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
dma-names = "tx";
clocks = <&nic_clk>;
clock-names = "sha_clk";
};
flx4: flexcom@e0070000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0070000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM4>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0070000 0x800>;
status = "disabled";
usart4: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
<&dma0 AT91_XDMAC_DT_PERID(10)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
spi4: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
<&dma0 AT91_XDMAC_DT_PERID(10)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "spi_clk";
atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
<&dma0 AT91_XDMAC_DT_PERID(10)>;
dma-names = "tx", "rx";
clocks = <&nic_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
timer0: timer@e008c000 {
compatible = "snps,dw-apb-timer";
reg = <0xe008c000 0x400>;
clocks = <&nic_clk>;
clock-names = "timer";
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
};
watchdog: watchdog@e0090000 {
compatible = "snps,dw-wdt";
reg = <0xe0090000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&nic_clk>;
status = "disabled";
};
cpu_ctrl: syscon@e00c0000 {
compatible = "microchip,lan966x-cpu-syscon", "syscon";
reg = <0xe00c0000 0x350>;
};
can0: can@e081c000 {
compatible = "bosch,m_can";
reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
reg-names = "m_can", "message_ram";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
clock-names = "hclk", "cclk";
assigned-clocks = <&clks GCK_ID_MCAN0>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
status = "disabled";
};
can1: can@e0820000 {
compatible = "bosch,m_can";
reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
reg-names = "m_can", "message_ram";
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
clock-names = "hclk", "cclk";
assigned-clocks = <&clks GCK_ID_MCAN1>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
status = "disabled";
};
reset: reset-controller@e200400c {
compatible = "microchip,lan966x-switch-reset";
reg = <0xe200400c 0x4>;
reg-names = "gcb";
#reset-cells = <1>;
cpu-syscon = <&cpu_ctrl>;
};
gpio: pinctrl@e2004064 {
compatible = "microchip,lan966x-pinctrl";
reg = <0xe2004064 0xb4>,
<0xe2010024 0x138>;
resets = <&reset 0>;
reset-names = "switch";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 78>;
interrupt-controller;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
mdio0: mdio@e2004118 {
compatible = "microchip,lan966x-miim";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xe2004118 0x24>;
clocks = <&sys_clk>;
status = "disabled";
};
mdio1: mdio@e200413c {
compatible = "microchip,lan966x-miim";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xe200413c 0x24>,
<0xe2010020 0x4>;
clocks = <&sys_clk>;
status = "disabled";
phy0: ethernet-phy@1 {
reg = <1>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
phy1: ethernet-phy@2 {
reg = <2>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
sgpio: gpio@e2004190 {
compatible = "microchip,sparx5-sgpio";
reg = <0xe2004190 0x118>;
clocks = <&sys_clk>;
resets = <&reset 0>;
reset-names = "switch";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sgpio_in: gpio@0 {
compatible = "microchip,sparx5-sgpio-bank";
reg = <0>;
gpio-controller;
#gpio-cells = <3>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
sgpio_out: gpio@1 {
compatible = "microchip,sparx5-sgpio-bank";
reg = <1>;
gpio-controller;
#gpio-cells = <3>;
};
};
hwmon: hwmon@e2010180 {
compatible = "microchip,lan9668-hwmon";
reg = <0xe2010180 0xc>,
<0xe20042a8 0xc>;
reg-names = "pvt", "fan";
clocks = <&sys_clk>;
};
serdes: serdes@e202c000 {
compatible = "microchip,lan966x-serdes";
reg = <0xe202c000 0x9c>,
<0xe2004010 0x4>;
#phy-cells = <2>;
status = "disabled";
};
gic: interrupt-controller@e8c11000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
reg = <0xe8c11000 0x1000>,
<0xe8c12000 0x2000>,
<0xe8c14000 0x2000>,
<0xe8c16000 0x2000>;
};
};
};