blob: 5ff6c588e16ec35136db6957b7e09e6f51a39565 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WXR-1900DHP
*
* Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
*/
/dts-v1/;
#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
model = "Buffalo WXR-1900DHP";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>,
<0x88000000 0x18000000>;
};
leds {
compatible = "gpio-leds";
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
router-amber {
label = "bcm53xx:amber:router";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
};
router-white {
label = "bcm53xx:white:router";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
};
wireless-amber {
label = "bcm53xx:amber:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
wireless-white {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
button-power {
label = "Power";
linux,code = <KEY_POWER>;
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
button-sw-ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
&spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};