blob: 702a85af2078363c06c5a65a543978686652536e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
* (Armada 370 SoC).
*
* Copyright (C) 2015 Seagate
*
* Author: Simon Guinot <simon.guinot@sequanux.org>
*/
/*
* TODO: add support for the white SATA LED.
*/
#include "armada-370.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
internal-regs {
coherency-fabric@20200 {
broken-idle;
};
serial@12000 {
status = "okay";
};
ethernet@74000 {
status = "okay";
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
usb@50000 {
status = "okay";
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button-usb {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
gpio-leds {
compatible = "gpio-leds";
red-sata0 {
label = "cumulus:red:sata0";
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
};
};
&pciec {
status = "okay";
/* USB 3.0 Bridge ASM1042A */
pcie@1,0 {
status = "okay";
};
};
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&pinctrl {
pinctrl-0 = <&sata_led_pin>;
pinctrl-names = "default";
sata_led_pin: sata-led-pin {
marvell,pins = "mpp60";
marvell,function = "sata0";
};
gpio_led_pin: gpio-led-pin {
marvell,pins = "mpp60";
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
/* MX25L8006E */
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
};
};