| * Omnivision OV2685 MIPI CSI-2 sensor |
| |
| Required Properties: |
| - compatible: shall be "ovti,ov2685" |
| - clocks: reference to the xvclk input clock |
| - clock-names: shall be "xvclk" |
| - avdd-supply: Analog voltage supply, 2.8 volts |
| - dovdd-supply: Digital I/O voltage supply, 1.8 volts |
| - dvdd-supply: Digital core voltage supply, 1.8 volts |
| - reset-gpios: Low active reset gpio |
| |
| The device node shall contain one 'port' child node with an |
| 'endpoint' subnode for its digital output video port, |
| in accordance with the video interface bindings defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. |
| The endpoint optional property 'data-lanes' shall be "<1>". |
| |
| Example: |
| &i2c7 { |
| ov2685: camera-sensor@3c { |
| compatible = "ovti,ov2685"; |
| reg = <0x3c>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&clk_24m_cam>; |
| |
| clocks = <&cru SCLK_TESTCLKOUT1>; |
| clock-names = "xvclk"; |
| |
| avdd-supply = <&pp2800_cam>; |
| dovdd-supply = <&pp1800>; |
| dvdd-supply = <&pp1800>; |
| reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; |
| |
| port { |
| ucam_out: endpoint { |
| remote-endpoint = <&mipi_in_ucam>; |
| data-lanes = <1>; |
| }; |
| }; |
| }; |
| }; |
