| /* | 
 |  * Context tracking: Probe on high level context boundaries such as kernel | 
 |  * and userspace. This includes syscalls and exceptions entry/exit. | 
 |  * | 
 |  * This is used by RCU to remove its dependency on the timer tick while a CPU | 
 |  * runs in userspace. | 
 |  * | 
 |  *  Started by Frederic Weisbecker: | 
 |  * | 
 |  * Copyright (C) 2012 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com> | 
 |  * | 
 |  * Many thanks to Gilad Ben-Yossef, Paul McKenney, Ingo Molnar, Andrew Morton, | 
 |  * Steven Rostedt, Peter Zijlstra for suggestions and improvements. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/context_tracking.h> | 
 | #include <linux/kvm_host.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/hardirq.h> | 
 | #include <linux/export.h> | 
 |  | 
 | DEFINE_PER_CPU(struct context_tracking, context_tracking) = { | 
 | #ifdef CONFIG_CONTEXT_TRACKING_FORCE | 
 | 	.active = true, | 
 | #endif | 
 | }; | 
 |  | 
 | /** | 
 |  * user_enter - Inform the context tracking that the CPU is going to | 
 |  *              enter userspace mode. | 
 |  * | 
 |  * This function must be called right before we switch from the kernel | 
 |  * to userspace, when it's guaranteed the remaining kernel instructions | 
 |  * to execute won't use any RCU read side critical section because this | 
 |  * function sets RCU in extended quiescent state. | 
 |  */ | 
 | void user_enter(void) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* | 
 | 	 * Some contexts may involve an exception occuring in an irq, | 
 | 	 * leading to that nesting: | 
 | 	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit() | 
 | 	 * This would mess up the dyntick_nesting count though. And rcu_irq_*() | 
 | 	 * helpers are enough to protect RCU uses inside the exception. So | 
 | 	 * just return immediately if we detect we are in an IRQ. | 
 | 	 */ | 
 | 	if (in_interrupt()) | 
 | 		return; | 
 |  | 
 | 	/* Kernel threads aren't supposed to go to userspace */ | 
 | 	WARN_ON_ONCE(!current->mm); | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	if (__this_cpu_read(context_tracking.active) && | 
 | 	    __this_cpu_read(context_tracking.state) != IN_USER) { | 
 | 		/* | 
 | 		 * At this stage, only low level arch entry code remains and | 
 | 		 * then we'll run in userspace. We can assume there won't be | 
 | 		 * any RCU read-side critical section until the next call to | 
 | 		 * user_exit() or rcu_irq_enter(). Let's remove RCU's dependency | 
 | 		 * on the tick. | 
 | 		 */ | 
 | 		vtime_user_enter(current); | 
 | 		rcu_user_enter(); | 
 | 		__this_cpu_write(context_tracking.state, IN_USER); | 
 | 	} | 
 | 	local_irq_restore(flags); | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * user_exit - Inform the context tracking that the CPU is | 
 |  *             exiting userspace mode and entering the kernel. | 
 |  * | 
 |  * This function must be called after we entered the kernel from userspace | 
 |  * before any use of RCU read side critical section. This potentially include | 
 |  * any high level kernel code like syscalls, exceptions, signal handling, etc... | 
 |  * | 
 |  * This call supports re-entrancy. This way it can be called from any exception | 
 |  * handler without needing to know if we came from userspace or not. | 
 |  */ | 
 | void user_exit(void) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (in_interrupt()) | 
 | 		return; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	if (__this_cpu_read(context_tracking.state) == IN_USER) { | 
 | 		/* | 
 | 		 * We are going to run code that may use RCU. Inform | 
 | 		 * RCU core about that (ie: we may need the tick again). | 
 | 		 */ | 
 | 		rcu_user_exit(); | 
 | 		vtime_user_exit(current); | 
 | 		__this_cpu_write(context_tracking.state, IN_KERNEL); | 
 | 	} | 
 | 	local_irq_restore(flags); | 
 | } | 
 |  | 
 | void guest_enter(void) | 
 | { | 
 | 	if (vtime_accounting_enabled()) | 
 | 		vtime_guest_enter(current); | 
 | 	else | 
 | 		__guest_enter(); | 
 | } | 
 | EXPORT_SYMBOL_GPL(guest_enter); | 
 |  | 
 | void guest_exit(void) | 
 | { | 
 | 	if (vtime_accounting_enabled()) | 
 | 		vtime_guest_exit(current); | 
 | 	else | 
 | 		__guest_exit(); | 
 | } | 
 | EXPORT_SYMBOL_GPL(guest_exit); | 
 |  | 
 |  | 
 | /** | 
 |  * context_tracking_task_switch - context switch the syscall callbacks | 
 |  * @prev: the task that is being switched out | 
 |  * @next: the task that is being switched in | 
 |  * | 
 |  * The context tracking uses the syscall slow path to implement its user-kernel | 
 |  * boundaries probes on syscalls. This way it doesn't impact the syscall fast | 
 |  * path on CPUs that don't do context tracking. | 
 |  * | 
 |  * But we need to clear the flag on the previous task because it may later | 
 |  * migrate to some CPU that doesn't do the context tracking. As such the TIF | 
 |  * flag may not be desired there. | 
 |  */ | 
 | void context_tracking_task_switch(struct task_struct *prev, | 
 | 			     struct task_struct *next) | 
 | { | 
 | 	if (__this_cpu_read(context_tracking.active)) { | 
 | 		clear_tsk_thread_flag(prev, TIF_NOHZ); | 
 | 		set_tsk_thread_flag(next, TIF_NOHZ); | 
 | 	} | 
 | } |