| /* |
| VES1820 - Single Chip Cable Channel Receiver driver module |
| |
| Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <asm/div64.h> |
| |
| #include <media/dvb_frontend.h> |
| #include "ves1820.h" |
| |
| |
| |
| struct ves1820_state { |
| struct i2c_adapter* i2c; |
| /* configuration settings */ |
| const struct ves1820_config* config; |
| struct dvb_frontend frontend; |
| |
| /* private demodulator data */ |
| u8 reg0; |
| u8 pwm; |
| }; |
| |
| |
| static int verbose; |
| |
| static u8 ves1820_inittab[] = { |
| 0x69, 0x6A, 0x93, 0x1A, 0x12, 0x46, 0x26, 0x1A, |
| 0x43, 0x6A, 0xAA, 0xAA, 0x1E, 0x85, 0x43, 0x20, |
| 0xE0, 0x00, 0xA1, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, |
| 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x40 |
| }; |
| |
| static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data) |
| { |
| u8 buf[] = { 0x00, reg, data }; |
| struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 3 }; |
| int ret; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| printk("ves1820: %s(): writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", |
| __func__, reg, data, ret); |
| |
| return (ret != 1) ? -EREMOTEIO : 0; |
| } |
| |
| static u8 ves1820_readreg(struct ves1820_state *state, u8 reg) |
| { |
| u8 b0[] = { 0x00, reg }; |
| u8 b1[] = { 0 }; |
| struct i2c_msg msg[] = { |
| {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 2}, |
| {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} |
| }; |
| int ret; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| printk("ves1820: %s(): readreg error (reg == 0x%02x, ret == %i)\n", |
| __func__, reg, ret); |
| |
| return b1[0]; |
| } |
| |
| static int ves1820_setup_reg0(struct ves1820_state *state, |
| u8 reg0, enum fe_spectral_inversion inversion) |
| { |
| reg0 |= state->reg0 & 0x62; |
| |
| if (INVERSION_ON == inversion) { |
| if (!state->config->invert) reg0 |= 0x20; |
| else reg0 &= ~0x20; |
| } else if (INVERSION_OFF == inversion) { |
| if (!state->config->invert) reg0 &= ~0x20; |
| else reg0 |= 0x20; |
| } |
| |
| ves1820_writereg(state, 0x00, reg0 & 0xfe); |
| ves1820_writereg(state, 0x00, reg0 | 0x01); |
| |
| state->reg0 = reg0; |
| |
| return 0; |
| } |
| |
| static int ves1820_set_symbolrate(struct ves1820_state *state, u32 symbolrate) |
| { |
| s32 BDR; |
| s32 BDRI; |
| s16 SFIL = 0; |
| u16 NDEC = 0; |
| u32 ratio; |
| u32 fin; |
| u32 tmp; |
| u64 fptmp; |
| u64 fpxin; |
| |
| if (symbolrate > state->config->xin / 2) |
| symbolrate = state->config->xin / 2; |
| |
| if (symbolrate < 500000) |
| symbolrate = 500000; |
| |
| if (symbolrate < state->config->xin / 16) |
| NDEC = 1; |
| if (symbolrate < state->config->xin / 32) |
| NDEC = 2; |
| if (symbolrate < state->config->xin / 64) |
| NDEC = 3; |
| |
| /* yeuch! */ |
| fpxin = state->config->xin * 10ULL; |
| fptmp = fpxin; do_div(fptmp, 123); |
| if (symbolrate < fptmp) |
| SFIL = 1; |
| fptmp = fpxin; do_div(fptmp, 160); |
| if (symbolrate < fptmp) |
| SFIL = 0; |
| fptmp = fpxin; do_div(fptmp, 246); |
| if (symbolrate < fptmp) |
| SFIL = 1; |
| fptmp = fpxin; do_div(fptmp, 320); |
| if (symbolrate < fptmp) |
| SFIL = 0; |
| fptmp = fpxin; do_div(fptmp, 492); |
| if (symbolrate < fptmp) |
| SFIL = 1; |
| fptmp = fpxin; do_div(fptmp, 640); |
| if (symbolrate < fptmp) |
| SFIL = 0; |
| fptmp = fpxin; do_div(fptmp, 984); |
| if (symbolrate < fptmp) |
| SFIL = 1; |
| |
| fin = state->config->xin >> 4; |
| symbolrate <<= NDEC; |
| ratio = (symbolrate << 4) / fin; |
| tmp = ((symbolrate << 4) % fin) << 8; |
| ratio = (ratio << 8) + tmp / fin; |
| tmp = (tmp % fin) << 8; |
| ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, fin); |
| |
| BDR = ratio; |
| BDRI = (((state->config->xin << 5) / symbolrate) + 1) / 2; |
| |
| if (BDRI > 0xFF) |
| BDRI = 0xFF; |
| |
| SFIL = (SFIL << 4) | ves1820_inittab[0x0E]; |
| |
| NDEC = (NDEC << 6) | ves1820_inittab[0x03]; |
| |
| ves1820_writereg(state, 0x03, NDEC); |
| ves1820_writereg(state, 0x0a, BDR & 0xff); |
| ves1820_writereg(state, 0x0b, (BDR >> 8) & 0xff); |
| ves1820_writereg(state, 0x0c, (BDR >> 16) & 0x3f); |
| |
| ves1820_writereg(state, 0x0d, BDRI); |
| ves1820_writereg(state, 0x0e, SFIL); |
| |
| return 0; |
| } |
| |
| static int ves1820_init(struct dvb_frontend* fe) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| int i; |
| |
| ves1820_writereg(state, 0, 0); |
| |
| for (i = 0; i < sizeof(ves1820_inittab); i++) |
| ves1820_writereg(state, i, ves1820_inittab[i]); |
| if (state->config->selagc) |
| ves1820_writereg(state, 2, ves1820_inittab[2] | 0x08); |
| |
| ves1820_writereg(state, 0x34, state->pwm); |
| |
| return 0; |
| } |
| |
| static int ves1820_set_parameters(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct ves1820_state* state = fe->demodulator_priv; |
| static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 }; |
| static const u8 reg0x01[] = { 140, 140, 106, 100, 92 }; |
| static const u8 reg0x05[] = { 135, 100, 70, 54, 38 }; |
| static const u8 reg0x08[] = { 162, 116, 67, 52, 35 }; |
| static const u8 reg0x09[] = { 145, 150, 106, 126, 107 }; |
| int real_qam = p->modulation - QAM_16; |
| |
| if (real_qam < 0 || real_qam > 4) |
| return -EINVAL; |
| |
| if (fe->ops.tuner_ops.set_params) { |
| fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| ves1820_set_symbolrate(state, p->symbol_rate); |
| ves1820_writereg(state, 0x34, state->pwm); |
| |
| ves1820_writereg(state, 0x01, reg0x01[real_qam]); |
| ves1820_writereg(state, 0x05, reg0x05[real_qam]); |
| ves1820_writereg(state, 0x08, reg0x08[real_qam]); |
| ves1820_writereg(state, 0x09, reg0x09[real_qam]); |
| |
| ves1820_setup_reg0(state, reg0x00[real_qam], p->inversion); |
| ves1820_writereg(state, 2, ves1820_inittab[2] | (state->config->selagc ? 0x08 : 0)); |
| return 0; |
| } |
| |
| static int ves1820_read_status(struct dvb_frontend *fe, |
| enum fe_status *status) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| int sync; |
| |
| *status = 0; |
| sync = ves1820_readreg(state, 0x11); |
| |
| if (sync & 1) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (sync & 2) |
| *status |= FE_HAS_CARRIER; |
| |
| if (sync & 2) /* XXX FIXME! */ |
| *status |= FE_HAS_VITERBI; |
| |
| if (sync & 4) |
| *status |= FE_HAS_SYNC; |
| |
| if (sync & 8) |
| *status |= FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| |
| u32 _ber = ves1820_readreg(state, 0x14) | |
| (ves1820_readreg(state, 0x15) << 8) | |
| ((ves1820_readreg(state, 0x16) & 0x0f) << 16); |
| *ber = 10 * _ber; |
| |
| return 0; |
| } |
| |
| static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| |
| u8 gain = ves1820_readreg(state, 0x17); |
| *strength = (gain << 8) | gain; |
| |
| return 0; |
| } |
| |
| static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| |
| u8 quality = ~ves1820_readreg(state, 0x18); |
| *snr = (quality << 8) | quality; |
| |
| return 0; |
| } |
| |
| static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| |
| *ucblocks = ves1820_readreg(state, 0x13) & 0x7f; |
| if (*ucblocks == 0x7f) |
| *ucblocks = 0xffffffff; |
| |
| /* reset uncorrected block counter */ |
| ves1820_writereg(state, 0x10, ves1820_inittab[0x10] & 0xdf); |
| ves1820_writereg(state, 0x10, ves1820_inittab[0x10]); |
| |
| return 0; |
| } |
| |
| static int ves1820_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *p) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| int sync; |
| s8 afc = 0; |
| |
| sync = ves1820_readreg(state, 0x11); |
| afc = ves1820_readreg(state, 0x19); |
| if (verbose) { |
| /* AFC only valid when carrier has been recovered */ |
| printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" : |
| "ves1820: [AFC (%d) %dHz]\n", afc, -((s32) p->symbol_rate * afc) >> 10); |
| } |
| |
| if (!state->config->invert) { |
| p->inversion = (state->reg0 & 0x20) ? INVERSION_ON : INVERSION_OFF; |
| } else { |
| p->inversion = (!(state->reg0 & 0x20)) ? INVERSION_ON : INVERSION_OFF; |
| } |
| |
| p->modulation = ((state->reg0 >> 2) & 7) + QAM_16; |
| |
| p->fec_inner = FEC_NONE; |
| |
| p->frequency = ((p->frequency + 31250) / 62500) * 62500; |
| if (sync & 2) |
| p->frequency -= ((s32) p->symbol_rate * afc) >> 10; |
| |
| return 0; |
| } |
| |
| static int ves1820_sleep(struct dvb_frontend* fe) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| |
| ves1820_writereg(state, 0x1b, 0x02); /* pdown ADC */ |
| ves1820_writereg(state, 0x00, 0x80); /* standby */ |
| |
| return 0; |
| } |
| |
| static int ves1820_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) |
| { |
| |
| fesettings->min_delay_ms = 200; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| return 0; |
| } |
| |
| static void ves1820_release(struct dvb_frontend* fe) |
| { |
| struct ves1820_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static const struct dvb_frontend_ops ves1820_ops; |
| |
| struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, |
| struct i2c_adapter* i2c, |
| u8 pwm) |
| { |
| struct ves1820_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->reg0 = ves1820_inittab[0]; |
| state->config = config; |
| state->i2c = i2c; |
| state->pwm = pwm; |
| |
| /* check if the demod is there */ |
| if ((ves1820_readreg(state, 0x1a) & 0xf0) != 0x70) |
| goto error; |
| |
| if (verbose) |
| printk("ves1820: pwm=0x%02x\n", state->pwm); |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &ves1820_ops, sizeof(struct dvb_frontend_ops)); |
| state->frontend.ops.info.symbol_rate_min = (state->config->xin / 2) / 64; /* SACLK/64 == (XIN/2)/64 */ |
| state->frontend.ops.info.symbol_rate_max = (state->config->xin / 2) / 4; /* SACLK/4 */ |
| state->frontend.demodulator_priv = state; |
| |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static const struct dvb_frontend_ops ves1820_ops = { |
| .delsys = { SYS_DVBC_ANNEX_A }, |
| .info = { |
| .name = "VLSI VES1820 DVB-C", |
| .frequency_stepsize = 62500, |
| .frequency_min = 47000000, |
| .frequency_max = 862000000, |
| .caps = FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | |
| FE_CAN_QAM_256 | |
| FE_CAN_FEC_AUTO |
| }, |
| |
| .release = ves1820_release, |
| |
| .init = ves1820_init, |
| .sleep = ves1820_sleep, |
| |
| .set_frontend = ves1820_set_parameters, |
| .get_frontend = ves1820_get_frontend, |
| .get_tune_settings = ves1820_get_tune_settings, |
| |
| .read_status = ves1820_read_status, |
| .read_ber = ves1820_read_ber, |
| .read_signal_strength = ves1820_read_signal_strength, |
| .read_snr = ves1820_read_snr, |
| .read_ucblocks = ves1820_read_ucblocks, |
| }; |
| |
| module_param(verbose, int, 0644); |
| MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting"); |
| |
| MODULE_DESCRIPTION("VLSI VES1820 DVB-C Demodulator driver"); |
| MODULE_AUTHOR("Ralph Metzler, Holger Waechtler"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(ves1820_attach); |