| // SPDX-License-Identifier: GPL-2.0-or-later |
| /******************************************************************************* |
| * IBM Virtual SCSI Target Driver |
| * Copyright (C) 2003-2005 Dave Boutcher (boutcher@us.ibm.com) IBM Corp. |
| * Santiago Leon (santil@us.ibm.com) IBM Corp. |
| * Linda Xie (lxie@us.ibm.com) IBM Corp. |
| * |
| * Copyright (C) 2005-2011 FUJITA Tomonori <tomof@acm.org> |
| * Copyright (C) 2010 Nicholas A. Bellinger <nab@kernel.org> |
| * |
| * Authors: Bryant G. Ly <bryantly@linux.vnet.ibm.com> |
| * Authors: Michael Cyr <mikecyr@linux.vnet.ibm.com> |
| * |
| ****************************************************************************/ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/list.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| |
| #include <target/target_core_base.h> |
| #include <target/target_core_fabric.h> |
| |
| #include <asm/hvcall.h> |
| #include <asm/vio.h> |
| |
| #include <scsi/viosrp.h> |
| |
| #include "ibmvscsi_tgt.h" |
| |
| #define IBMVSCSIS_VERSION "v0.2" |
| |
| #define INITIAL_SRP_LIMIT 1024 |
| #define DEFAULT_MAX_SECTORS 256 |
| #define MAX_TXU 1024 * 1024 |
| |
| static uint max_vdma_size = MAX_H_COPY_RDMA; |
| |
| static char system_id[SYS_ID_NAME_LEN] = ""; |
| static char partition_name[PARTITION_NAMELEN] = "UNKNOWN"; |
| static uint partition_number = -1; |
| |
| /* Adapter list and lock to control it */ |
| static DEFINE_SPINLOCK(ibmvscsis_dev_lock); |
| static LIST_HEAD(ibmvscsis_dev_list); |
| |
| static long ibmvscsis_parse_command(struct scsi_info *vscsi, |
| struct viosrp_crq *crq); |
| |
| static void ibmvscsis_adapter_idle(struct scsi_info *vscsi); |
| |
| static void ibmvscsis_determine_resid(struct se_cmd *se_cmd, |
| struct srp_rsp *rsp) |
| { |
| u32 residual_count = se_cmd->residual_count; |
| |
| if (!residual_count) |
| return; |
| |
| if (se_cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) { |
| if (se_cmd->data_direction == DMA_TO_DEVICE) { |
| /* residual data from an underflow write */ |
| rsp->flags = SRP_RSP_FLAG_DOUNDER; |
| rsp->data_out_res_cnt = cpu_to_be32(residual_count); |
| } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { |
| /* residual data from an underflow read */ |
| rsp->flags = SRP_RSP_FLAG_DIUNDER; |
| rsp->data_in_res_cnt = cpu_to_be32(residual_count); |
| } |
| } else if (se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { |
| if (se_cmd->data_direction == DMA_TO_DEVICE) { |
| /* residual data from an overflow write */ |
| rsp->flags = SRP_RSP_FLAG_DOOVER; |
| rsp->data_out_res_cnt = cpu_to_be32(residual_count); |
| } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { |
| /* residual data from an overflow read */ |
| rsp->flags = SRP_RSP_FLAG_DIOVER; |
| rsp->data_in_res_cnt = cpu_to_be32(residual_count); |
| } |
| } |
| } |
| |
| /** |
| * connection_broken() - Determine if the connection to the client is good |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function attempts to send a ping MAD to the client. If the call to |
| * queue the request returns H_CLOSED then the connection has been broken |
| * and the function returns TRUE. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt or Process environment |
| */ |
| static bool connection_broken(struct scsi_info *vscsi) |
| { |
| struct viosrp_crq *crq; |
| u64 buffer[2] = { 0, 0 }; |
| long h_return_code; |
| bool rc = false; |
| |
| /* create a PING crq */ |
| crq = (struct viosrp_crq *)&buffer; |
| crq->valid = VALID_CMD_RESP_EL; |
| crq->format = MESSAGE_IN_CRQ; |
| crq->status = PING; |
| |
| h_return_code = h_send_crq(vscsi->dds.unit_id, |
| cpu_to_be64(buffer[MSG_HI]), |
| cpu_to_be64(buffer[MSG_LOW])); |
| |
| dev_dbg(&vscsi->dev, "Connection_broken: rc %ld\n", h_return_code); |
| |
| if (h_return_code == H_CLOSED) |
| rc = true; |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_unregister_command_q() - Helper Function-Unregister Command Queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function calls h_free_q then frees the interrupt bit etc. |
| * It must release the lock before doing so because of the time it can take |
| * for h_free_crq in PHYP |
| * NOTE: * the caller must make sure that state and or flags will prevent |
| * interrupt handler from scheduling work. |
| * * anyone calling this function may need to set the CRQ_CLOSED flag |
| * we can't do it here, because we don't have the lock |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level |
| */ |
| static long ibmvscsis_unregister_command_q(struct scsi_info *vscsi) |
| { |
| long qrc; |
| long rc = ADAPT_SUCCESS; |
| int ticks = 0; |
| |
| do { |
| qrc = h_free_crq(vscsi->dds.unit_id); |
| switch (qrc) { |
| case H_SUCCESS: |
| spin_lock_bh(&vscsi->intr_lock); |
| vscsi->flags &= ~PREP_FOR_SUSPEND_FLAGS; |
| spin_unlock_bh(&vscsi->intr_lock); |
| break; |
| |
| case H_HARDWARE: |
| case H_PARAMETER: |
| dev_err(&vscsi->dev, "unregister_command_q: error from h_free_crq %ld\n", |
| qrc); |
| rc = ERROR; |
| break; |
| |
| case H_BUSY: |
| case H_LONG_BUSY_ORDER_1_MSEC: |
| /* msleep not good for small values */ |
| usleep_range(1000, 2000); |
| ticks += 1; |
| break; |
| case H_LONG_BUSY_ORDER_10_MSEC: |
| usleep_range(10000, 20000); |
| ticks += 10; |
| break; |
| case H_LONG_BUSY_ORDER_100_MSEC: |
| msleep(100); |
| ticks += 100; |
| break; |
| case H_LONG_BUSY_ORDER_1_SEC: |
| ssleep(1); |
| ticks += 1000; |
| break; |
| case H_LONG_BUSY_ORDER_10_SEC: |
| ssleep(10); |
| ticks += 10000; |
| break; |
| case H_LONG_BUSY_ORDER_100_SEC: |
| ssleep(100); |
| ticks += 100000; |
| break; |
| default: |
| dev_err(&vscsi->dev, "unregister_command_q: unknown error %ld from h_free_crq\n", |
| qrc); |
| rc = ERROR; |
| break; |
| } |
| |
| /* |
| * dont wait more then 300 seconds |
| * ticks are in milliseconds more or less |
| */ |
| if (ticks > 300000 && qrc != H_SUCCESS) { |
| rc = ERROR; |
| dev_err(&vscsi->dev, "Excessive wait for h_free_crq\n"); |
| } |
| } while (qrc != H_SUCCESS && rc == ADAPT_SUCCESS); |
| |
| dev_dbg(&vscsi->dev, "Freeing CRQ: phyp rc %ld, rc %ld\n", qrc, rc); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_delete_client_info() - Helper function to Delete Client Info |
| * @vscsi: Pointer to our adapter structure |
| * @client_closed: True if client closed its queue |
| * |
| * Deletes information specific to the client when the client goes away |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt or Process |
| */ |
| static void ibmvscsis_delete_client_info(struct scsi_info *vscsi, |
| bool client_closed) |
| { |
| vscsi->client_cap = 0; |
| |
| /* |
| * Some things we don't want to clear if we're closing the queue, |
| * because some clients don't resend the host handshake when they |
| * get a transport event. |
| */ |
| if (client_closed) |
| vscsi->client_data.os_type = 0; |
| } |
| |
| /** |
| * ibmvscsis_free_command_q() - Free Command Queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function calls unregister_command_q, then clears interrupts and |
| * any pending interrupt acknowledgments associated with the command q. |
| * It also clears memory if there is no error. |
| * |
| * PHYP did not meet the PAPR architecture so that we must give up the |
| * lock. This causes a timing hole regarding state change. To close the |
| * hole this routine does accounting on any change that occurred during |
| * the time the lock is not held. |
| * NOTE: must give up and then acquire the interrupt lock, the caller must |
| * make sure that state and or flags will prevent interrupt handler from |
| * scheduling work. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level, interrupt lock is held |
| */ |
| static long ibmvscsis_free_command_q(struct scsi_info *vscsi) |
| { |
| int bytes; |
| u32 flags_under_lock; |
| u16 state_under_lock; |
| long rc = ADAPT_SUCCESS; |
| |
| if (!(vscsi->flags & CRQ_CLOSED)) { |
| vio_disable_interrupts(vscsi->dma_dev); |
| |
| state_under_lock = vscsi->new_state; |
| flags_under_lock = vscsi->flags; |
| vscsi->phyp_acr_state = 0; |
| vscsi->phyp_acr_flags = 0; |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| rc = ibmvscsis_unregister_command_q(vscsi); |
| spin_lock_bh(&vscsi->intr_lock); |
| |
| if (state_under_lock != vscsi->new_state) |
| vscsi->phyp_acr_state = vscsi->new_state; |
| |
| vscsi->phyp_acr_flags = ((~flags_under_lock) & vscsi->flags); |
| |
| if (rc == ADAPT_SUCCESS) { |
| bytes = vscsi->cmd_q.size * PAGE_SIZE; |
| memset(vscsi->cmd_q.base_addr, 0, bytes); |
| vscsi->cmd_q.index = 0; |
| vscsi->flags |= CRQ_CLOSED; |
| |
| ibmvscsis_delete_client_info(vscsi, false); |
| } |
| |
| dev_dbg(&vscsi->dev, "free_command_q: flags 0x%x, state 0x%hx, acr_flags 0x%x, acr_state 0x%hx\n", |
| vscsi->flags, vscsi->state, vscsi->phyp_acr_flags, |
| vscsi->phyp_acr_state); |
| } |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_cmd_q_dequeue() - Get valid Command element |
| * @mask: Mask to use in case index wraps |
| * @current_index: Current index into command queue |
| * @base_addr: Pointer to start of command queue |
| * |
| * Returns a pointer to a valid command element or NULL, if the command |
| * queue is empty |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt environment, interrupt lock held |
| */ |
| static struct viosrp_crq *ibmvscsis_cmd_q_dequeue(uint mask, |
| uint *current_index, |
| struct viosrp_crq *base_addr) |
| { |
| struct viosrp_crq *ptr; |
| |
| ptr = base_addr + *current_index; |
| |
| if (ptr->valid) { |
| *current_index = (*current_index + 1) & mask; |
| dma_rmb(); |
| } else { |
| ptr = NULL; |
| } |
| |
| return ptr; |
| } |
| |
| /** |
| * ibmvscsis_send_init_message() - send initialize message to the client |
| * @vscsi: Pointer to our adapter structure |
| * @format: Which Init Message format to send |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt environment interrupt lock held |
| */ |
| static long ibmvscsis_send_init_message(struct scsi_info *vscsi, u8 format) |
| { |
| struct viosrp_crq *crq; |
| u64 buffer[2] = { 0, 0 }; |
| long rc; |
| |
| crq = (struct viosrp_crq *)&buffer; |
| crq->valid = VALID_INIT_MSG; |
| crq->format = format; |
| rc = h_send_crq(vscsi->dds.unit_id, cpu_to_be64(buffer[MSG_HI]), |
| cpu_to_be64(buffer[MSG_LOW])); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_check_init_msg() - Check init message valid |
| * @vscsi: Pointer to our adapter structure |
| * @format: Pointer to return format of Init Message, if any. |
| * Set to UNUSED_FORMAT if no Init Message in queue. |
| * |
| * Checks if an initialize message was queued by the initiatior |
| * after the queue was created and before the interrupt was enabled. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level only, interrupt lock held |
| */ |
| static long ibmvscsis_check_init_msg(struct scsi_info *vscsi, uint *format) |
| { |
| struct viosrp_crq *crq; |
| long rc = ADAPT_SUCCESS; |
| |
| crq = ibmvscsis_cmd_q_dequeue(vscsi->cmd_q.mask, &vscsi->cmd_q.index, |
| vscsi->cmd_q.base_addr); |
| if (!crq) { |
| *format = (uint)UNUSED_FORMAT; |
| } else if (crq->valid == VALID_INIT_MSG && crq->format == INIT_MSG) { |
| *format = (uint)INIT_MSG; |
| crq->valid = INVALIDATE_CMD_RESP_EL; |
| dma_rmb(); |
| |
| /* |
| * the caller has ensured no initialize message was |
| * sent after the queue was |
| * created so there should be no other message on the queue. |
| */ |
| crq = ibmvscsis_cmd_q_dequeue(vscsi->cmd_q.mask, |
| &vscsi->cmd_q.index, |
| vscsi->cmd_q.base_addr); |
| if (crq) { |
| *format = (uint)(crq->format); |
| rc = ERROR; |
| crq->valid = INVALIDATE_CMD_RESP_EL; |
| dma_rmb(); |
| } |
| } else { |
| *format = (uint)(crq->format); |
| rc = ERROR; |
| crq->valid = INVALIDATE_CMD_RESP_EL; |
| dma_rmb(); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_disconnect() - Helper function to disconnect |
| * @work: Pointer to work_struct, gives access to our adapter structure |
| * |
| * An error has occurred or the driver received a Transport event, |
| * and the driver is requesting that the command queue be de-registered |
| * in a safe manner. If there is no outstanding I/O then we can stop the |
| * queue. If we are restarting the queue it will be reflected in the |
| * the state of the adapter. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process environment |
| */ |
| static void ibmvscsis_disconnect(struct work_struct *work) |
| { |
| struct scsi_info *vscsi = container_of(work, struct scsi_info, |
| proc_work); |
| u16 new_state; |
| bool wait_idle = false; |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| new_state = vscsi->new_state; |
| vscsi->new_state = 0; |
| |
| vscsi->flags |= DISCONNECT_SCHEDULED; |
| vscsi->flags &= ~SCHEDULE_DISCONNECT; |
| |
| dev_dbg(&vscsi->dev, "disconnect: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| |
| /* |
| * check which state we are in and see if we |
| * should transitition to the new state |
| */ |
| switch (vscsi->state) { |
| /* Should never be called while in this state. */ |
| case NO_QUEUE: |
| /* |
| * Can never transition from this state; |
| * igonore errors and logout. |
| */ |
| case UNCONFIGURING: |
| break; |
| |
| /* can transition from this state to UNCONFIGURING */ |
| case ERR_DISCONNECT: |
| if (new_state == UNCONFIGURING) |
| vscsi->state = new_state; |
| break; |
| |
| /* |
| * Can transition from this state to unconfiguring |
| * or err disconnect. |
| */ |
| case ERR_DISCONNECT_RECONNECT: |
| switch (new_state) { |
| case UNCONFIGURING: |
| case ERR_DISCONNECT: |
| vscsi->state = new_state; |
| break; |
| |
| case WAIT_IDLE: |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| /* can transition from this state to UNCONFIGURING */ |
| case ERR_DISCONNECTED: |
| if (new_state == UNCONFIGURING) |
| vscsi->state = new_state; |
| break; |
| |
| case WAIT_ENABLED: |
| switch (new_state) { |
| case UNCONFIGURING: |
| vscsi->state = new_state; |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| vscsi->flags &= ~(SCHEDULE_DISCONNECT | |
| DISCONNECT_SCHEDULED); |
| dma_rmb(); |
| if (vscsi->flags & CFG_SLEEPING) { |
| vscsi->flags &= ~CFG_SLEEPING; |
| complete(&vscsi->unconfig); |
| } |
| break; |
| |
| /* should never happen */ |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case WAIT_IDLE: |
| dev_err(&vscsi->dev, "disconnect: invalid state %d for WAIT_IDLE\n", |
| vscsi->state); |
| break; |
| } |
| break; |
| |
| case WAIT_IDLE: |
| switch (new_state) { |
| case UNCONFIGURING: |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| vscsi->state = new_state; |
| vscsi->flags &= ~(SCHEDULE_DISCONNECT | |
| DISCONNECT_SCHEDULED); |
| ibmvscsis_free_command_q(vscsi); |
| break; |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| vscsi->state = new_state; |
| break; |
| } |
| break; |
| |
| /* |
| * Initiator has not done a successful srp login |
| * or has done a successful srp logout ( adapter was not |
| * busy). In the first case there can be responses queued |
| * waiting for space on the initiators response queue (MAD) |
| * The second case the adapter is idle. Assume the worse case, |
| * i.e. the second case. |
| */ |
| case WAIT_CONNECTION: |
| case CONNECTED: |
| case SRP_PROCESSING: |
| wait_idle = true; |
| vscsi->state = new_state; |
| break; |
| |
| /* can transition from this state to UNCONFIGURING */ |
| case UNDEFINED: |
| if (new_state == UNCONFIGURING) |
| vscsi->state = new_state; |
| break; |
| default: |
| break; |
| } |
| |
| if (wait_idle) { |
| dev_dbg(&vscsi->dev, "disconnect start wait, active %d, sched %d\n", |
| (int)list_empty(&vscsi->active_q), |
| (int)list_empty(&vscsi->schedule_q)); |
| if (!list_empty(&vscsi->active_q) || |
| !list_empty(&vscsi->schedule_q)) { |
| vscsi->flags |= WAIT_FOR_IDLE; |
| dev_dbg(&vscsi->dev, "disconnect flags 0x%x\n", |
| vscsi->flags); |
| /* |
| * This routine is can not be called with the interrupt |
| * lock held. |
| */ |
| spin_unlock_bh(&vscsi->intr_lock); |
| wait_for_completion(&vscsi->wait_idle); |
| spin_lock_bh(&vscsi->intr_lock); |
| } |
| dev_dbg(&vscsi->dev, "disconnect stop wait\n"); |
| |
| ibmvscsis_adapter_idle(vscsi); |
| } |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| /** |
| * ibmvscsis_post_disconnect() - Schedule the disconnect |
| * @vscsi: Pointer to our adapter structure |
| * @new_state: State to move to after disconnecting |
| * @flag_bits: Flags to turn on in adapter structure |
| * |
| * If it's already been scheduled, then see if we need to "upgrade" |
| * the new state (if the one passed in is more "severe" than the |
| * previous one). |
| * |
| * PRECONDITION: |
| * interrupt lock is held |
| */ |
| static void ibmvscsis_post_disconnect(struct scsi_info *vscsi, uint new_state, |
| uint flag_bits) |
| { |
| uint state; |
| |
| /* check the validity of the new state */ |
| switch (new_state) { |
| case UNCONFIGURING: |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case WAIT_IDLE: |
| break; |
| |
| default: |
| dev_err(&vscsi->dev, "post_disconnect: Invalid new state %d\n", |
| new_state); |
| return; |
| } |
| |
| vscsi->flags |= flag_bits; |
| |
| dev_dbg(&vscsi->dev, "post_disconnect: new_state 0x%x, flag_bits 0x%x, vscsi->flags 0x%x, state %hx\n", |
| new_state, flag_bits, vscsi->flags, vscsi->state); |
| |
| if (!(vscsi->flags & (DISCONNECT_SCHEDULED | SCHEDULE_DISCONNECT))) { |
| vscsi->flags |= SCHEDULE_DISCONNECT; |
| vscsi->new_state = new_state; |
| |
| INIT_WORK(&vscsi->proc_work, ibmvscsis_disconnect); |
| (void)queue_work(vscsi->work_q, &vscsi->proc_work); |
| } else { |
| if (vscsi->new_state) |
| state = vscsi->new_state; |
| else |
| state = vscsi->state; |
| |
| switch (state) { |
| case NO_QUEUE: |
| case UNCONFIGURING: |
| break; |
| |
| case ERR_DISCONNECTED: |
| case ERR_DISCONNECT: |
| case UNDEFINED: |
| if (new_state == UNCONFIGURING) |
| vscsi->new_state = new_state; |
| break; |
| |
| case ERR_DISCONNECT_RECONNECT: |
| switch (new_state) { |
| case UNCONFIGURING: |
| case ERR_DISCONNECT: |
| vscsi->new_state = new_state; |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case WAIT_ENABLED: |
| case WAIT_IDLE: |
| case WAIT_CONNECTION: |
| case CONNECTED: |
| case SRP_PROCESSING: |
| vscsi->new_state = new_state; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving post_disconnect: flags 0x%x, new_state 0x%x\n", |
| vscsi->flags, vscsi->new_state); |
| } |
| |
| /** |
| * ibmvscsis_handle_init_compl_msg() - Respond to an Init Complete Message |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static long ibmvscsis_handle_init_compl_msg(struct scsi_info *vscsi) |
| { |
| long rc = ADAPT_SUCCESS; |
| |
| switch (vscsi->state) { |
| case NO_QUEUE: |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case ERR_DISCONNECTED: |
| case UNCONFIGURING: |
| case UNDEFINED: |
| rc = ERROR; |
| break; |
| |
| case WAIT_CONNECTION: |
| vscsi->state = CONNECTED; |
| break; |
| |
| case WAIT_IDLE: |
| case SRP_PROCESSING: |
| case CONNECTED: |
| case WAIT_ENABLED: |
| default: |
| rc = ERROR; |
| dev_err(&vscsi->dev, "init_msg: invalid state %d to get init compl msg\n", |
| vscsi->state); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_handle_init_msg() - Respond to an Init Message |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static long ibmvscsis_handle_init_msg(struct scsi_info *vscsi) |
| { |
| long rc = ADAPT_SUCCESS; |
| |
| switch (vscsi->state) { |
| case WAIT_CONNECTION: |
| rc = ibmvscsis_send_init_message(vscsi, INIT_COMPLETE_MSG); |
| switch (rc) { |
| case H_SUCCESS: |
| vscsi->state = CONNECTED; |
| break; |
| |
| case H_PARAMETER: |
| dev_err(&vscsi->dev, "init_msg: failed to send, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT, 0); |
| break; |
| |
| case H_DROPPED: |
| dev_err(&vscsi->dev, "init_msg: failed to send, rc %ld\n", |
| rc); |
| rc = ERROR; |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| |
| case H_CLOSED: |
| dev_warn(&vscsi->dev, "init_msg: failed to send, rc %ld\n", |
| rc); |
| rc = 0; |
| break; |
| } |
| break; |
| |
| case UNDEFINED: |
| rc = ERROR; |
| break; |
| |
| case UNCONFIGURING: |
| break; |
| |
| case WAIT_ENABLED: |
| case CONNECTED: |
| case SRP_PROCESSING: |
| case WAIT_IDLE: |
| case NO_QUEUE: |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case ERR_DISCONNECTED: |
| default: |
| rc = ERROR; |
| dev_err(&vscsi->dev, "init_msg: invalid state %d to get init msg\n", |
| vscsi->state); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_init_msg() - Respond to an init message |
| * @vscsi: Pointer to our adapter structure |
| * @crq: Pointer to CRQ element containing the Init Message |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_init_msg(struct scsi_info *vscsi, struct viosrp_crq *crq) |
| { |
| long rc = ADAPT_SUCCESS; |
| |
| dev_dbg(&vscsi->dev, "init_msg: state 0x%hx\n", vscsi->state); |
| |
| rc = h_vioctl(vscsi->dds.unit_id, H_GET_PARTNER_INFO, |
| (u64)vscsi->map_ioba | ((u64)PAGE_SIZE << 32), 0, 0, 0, |
| 0); |
| if (rc == H_SUCCESS) { |
| vscsi->client_data.partition_number = |
| be64_to_cpu(*(u64 *)vscsi->map_buf); |
| dev_dbg(&vscsi->dev, "init_msg, part num %d\n", |
| vscsi->client_data.partition_number); |
| } else { |
| dev_dbg(&vscsi->dev, "init_msg h_vioctl rc %ld\n", rc); |
| rc = ADAPT_SUCCESS; |
| } |
| |
| if (crq->format == INIT_MSG) { |
| rc = ibmvscsis_handle_init_msg(vscsi); |
| } else if (crq->format == INIT_COMPLETE_MSG) { |
| rc = ibmvscsis_handle_init_compl_msg(vscsi); |
| } else { |
| rc = ERROR; |
| dev_err(&vscsi->dev, "init_msg: invalid format %d\n", |
| (uint)crq->format); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_establish_new_q() - Establish new CRQ queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static long ibmvscsis_establish_new_q(struct scsi_info *vscsi) |
| { |
| long rc = ADAPT_SUCCESS; |
| uint format; |
| |
| rc = h_vioctl(vscsi->dds.unit_id, H_ENABLE_PREPARE_FOR_SUSPEND, 30000, |
| 0, 0, 0, 0); |
| if (rc == H_SUCCESS) |
| vscsi->flags |= PREP_FOR_SUSPEND_ENABLED; |
| else if (rc != H_NOT_FOUND) |
| dev_err(&vscsi->dev, "Error from Enable Prepare for Suspend: %ld\n", |
| rc); |
| |
| vscsi->flags &= PRESERVE_FLAG_FIELDS; |
| vscsi->rsp_q_timer.timer_pops = 0; |
| vscsi->debit = 0; |
| vscsi->credit = 0; |
| |
| rc = vio_enable_interrupts(vscsi->dma_dev); |
| if (rc) { |
| dev_warn(&vscsi->dev, "establish_new_q: failed to enable interrupts, rc %ld\n", |
| rc); |
| return rc; |
| } |
| |
| rc = ibmvscsis_check_init_msg(vscsi, &format); |
| if (rc) { |
| dev_err(&vscsi->dev, "establish_new_q: check_init_msg failed, rc %ld\n", |
| rc); |
| return rc; |
| } |
| |
| if (format == UNUSED_FORMAT) { |
| rc = ibmvscsis_send_init_message(vscsi, INIT_MSG); |
| switch (rc) { |
| case H_SUCCESS: |
| case H_DROPPED: |
| case H_CLOSED: |
| rc = ADAPT_SUCCESS; |
| break; |
| |
| case H_PARAMETER: |
| case H_HARDWARE: |
| break; |
| |
| default: |
| vscsi->state = UNDEFINED; |
| rc = H_HARDWARE; |
| break; |
| } |
| } else if (format == INIT_MSG) { |
| rc = ibmvscsis_handle_init_msg(vscsi); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_reset_queue() - Reset CRQ Queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function calls h_free_q and then calls h_reg_q and does all |
| * of the bookkeeping to get us back to where we can communicate. |
| * |
| * Actually, we don't always call h_free_crq. A problem was discovered |
| * where one partition would close and reopen his queue, which would |
| * cause his partner to get a transport event, which would cause him to |
| * close and reopen his queue, which would cause the original partition |
| * to get a transport event, etc., etc. To prevent this, we don't |
| * actually close our queue if the client initiated the reset, (i.e. |
| * either we got a transport event or we have detected that the client's |
| * queue is gone) |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process environment, called with interrupt lock held |
| */ |
| static void ibmvscsis_reset_queue(struct scsi_info *vscsi) |
| { |
| int bytes; |
| long rc = ADAPT_SUCCESS; |
| |
| dev_dbg(&vscsi->dev, "reset_queue: flags 0x%x\n", vscsi->flags); |
| |
| /* don't reset, the client did it for us */ |
| if (vscsi->flags & (CLIENT_FAILED | TRANS_EVENT)) { |
| vscsi->flags &= PRESERVE_FLAG_FIELDS; |
| vscsi->rsp_q_timer.timer_pops = 0; |
| vscsi->debit = 0; |
| vscsi->credit = 0; |
| vscsi->state = WAIT_CONNECTION; |
| vio_enable_interrupts(vscsi->dma_dev); |
| } else { |
| rc = ibmvscsis_free_command_q(vscsi); |
| if (rc == ADAPT_SUCCESS) { |
| vscsi->state = WAIT_CONNECTION; |
| |
| bytes = vscsi->cmd_q.size * PAGE_SIZE; |
| rc = h_reg_crq(vscsi->dds.unit_id, |
| vscsi->cmd_q.crq_token, bytes); |
| if (rc == H_CLOSED || rc == H_SUCCESS) { |
| rc = ibmvscsis_establish_new_q(vscsi); |
| } |
| |
| if (rc != ADAPT_SUCCESS) { |
| dev_dbg(&vscsi->dev, "reset_queue: reg_crq rc %ld\n", |
| rc); |
| |
| vscsi->state = ERR_DISCONNECTED; |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| ibmvscsis_free_command_q(vscsi); |
| } |
| } else { |
| vscsi->state = ERR_DISCONNECTED; |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| } |
| } |
| } |
| |
| /** |
| * ibmvscsis_free_cmd_resources() - Free command resources |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Command which is not longer in use |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static void ibmvscsis_free_cmd_resources(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd) |
| { |
| struct iu_entry *iue = cmd->iue; |
| |
| switch (cmd->type) { |
| case TASK_MANAGEMENT: |
| case SCSI_CDB: |
| /* |
| * When the queue goes down this value is cleared, so it |
| * cannot be cleared in this general purpose function. |
| */ |
| if (vscsi->debit) |
| vscsi->debit -= 1; |
| break; |
| case ADAPTER_MAD: |
| vscsi->flags &= ~PROCESSING_MAD; |
| break; |
| case UNSET_TYPE: |
| break; |
| default: |
| dev_err(&vscsi->dev, "free_cmd_resources unknown type %d\n", |
| cmd->type); |
| break; |
| } |
| |
| cmd->iue = NULL; |
| list_add_tail(&cmd->list, &vscsi->free_cmd); |
| srp_iu_put(iue); |
| |
| if (list_empty(&vscsi->active_q) && list_empty(&vscsi->schedule_q) && |
| list_empty(&vscsi->waiting_rsp) && (vscsi->flags & WAIT_FOR_IDLE)) { |
| vscsi->flags &= ~WAIT_FOR_IDLE; |
| complete(&vscsi->wait_idle); |
| } |
| } |
| |
| /** |
| * ibmvscsis_ready_for_suspend() - Helper function to call VIOCTL |
| * @vscsi: Pointer to our adapter structure |
| * @idle: Indicates whether we were called from adapter_idle. This |
| * is important to know if we need to do a disconnect, since if |
| * we're called from adapter_idle, we're still processing the |
| * current disconnect, so we can't just call post_disconnect. |
| * |
| * This function is called when the adapter is idle when phyp has sent |
| * us a Prepare for Suspend Transport Event. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process or interrupt environment called with interrupt lock held |
| */ |
| static long ibmvscsis_ready_for_suspend(struct scsi_info *vscsi, bool idle) |
| { |
| long rc = 0; |
| struct viosrp_crq *crq; |
| |
| /* See if there is a Resume event in the queue */ |
| crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index; |
| |
| dev_dbg(&vscsi->dev, "ready_suspend: flags 0x%x, state 0x%hx crq_valid:%x\n", |
| vscsi->flags, vscsi->state, (int)crq->valid); |
| |
| if (!(vscsi->flags & PREP_FOR_SUSPEND_ABORTED) && !(crq->valid)) { |
| rc = h_vioctl(vscsi->dds.unit_id, H_READY_FOR_SUSPEND, 0, 0, 0, |
| 0, 0); |
| if (rc) { |
| dev_err(&vscsi->dev, "Ready for Suspend Vioctl failed: %ld\n", |
| rc); |
| rc = 0; |
| } |
| } else if (((vscsi->flags & PREP_FOR_SUSPEND_OVERWRITE) && |
| (vscsi->flags & PREP_FOR_SUSPEND_ABORTED)) || |
| ((crq->valid) && ((crq->valid != VALID_TRANS_EVENT) || |
| (crq->format != RESUME_FROM_SUSP)))) { |
| if (idle) { |
| vscsi->state = ERR_DISCONNECT_RECONNECT; |
| ibmvscsis_reset_queue(vscsi); |
| rc = -1; |
| } else if (vscsi->state == CONNECTED) { |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| } |
| |
| vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE; |
| |
| if ((crq->valid) && ((crq->valid != VALID_TRANS_EVENT) || |
| (crq->format != RESUME_FROM_SUSP))) |
| dev_err(&vscsi->dev, "Invalid element in CRQ after Prepare for Suspend"); |
| } |
| |
| vscsi->flags &= ~(PREP_FOR_SUSPEND_PENDING | PREP_FOR_SUSPEND_ABORTED); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_trans_event() - Handle a Transport Event |
| * @vscsi: Pointer to our adapter structure |
| * @crq: Pointer to CRQ entry containing the Transport Event |
| * |
| * Do the logic to close the I_T nexus. This function may not |
| * behave to specification. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_trans_event(struct scsi_info *vscsi, |
| struct viosrp_crq *crq) |
| { |
| long rc = ADAPT_SUCCESS; |
| |
| dev_dbg(&vscsi->dev, "trans_event: format %d, flags 0x%x, state 0x%hx\n", |
| (int)crq->format, vscsi->flags, vscsi->state); |
| |
| switch (crq->format) { |
| case MIGRATED: |
| case PARTNER_FAILED: |
| case PARTNER_DEREGISTER: |
| ibmvscsis_delete_client_info(vscsi, true); |
| if (crq->format == MIGRATED) |
| vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE; |
| switch (vscsi->state) { |
| case NO_QUEUE: |
| case ERR_DISCONNECTED: |
| case UNDEFINED: |
| break; |
| |
| case UNCONFIGURING: |
| vscsi->flags |= (RESPONSE_Q_DOWN | TRANS_EVENT); |
| break; |
| |
| case WAIT_ENABLED: |
| break; |
| |
| case WAIT_CONNECTION: |
| break; |
| |
| case CONNECTED: |
| ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, |
| (RESPONSE_Q_DOWN | |
| TRANS_EVENT)); |
| break; |
| |
| case SRP_PROCESSING: |
| if ((vscsi->debit > 0) || |
| !list_empty(&vscsi->schedule_q) || |
| !list_empty(&vscsi->waiting_rsp) || |
| !list_empty(&vscsi->active_q)) { |
| dev_dbg(&vscsi->dev, "debit %d, sched %d, wait %d, active %d\n", |
| vscsi->debit, |
| (int)list_empty(&vscsi->schedule_q), |
| (int)list_empty(&vscsi->waiting_rsp), |
| (int)list_empty(&vscsi->active_q)); |
| dev_warn(&vscsi->dev, "connection lost with outstanding work\n"); |
| } else { |
| dev_dbg(&vscsi->dev, "trans_event: SRP Processing, but no outstanding work\n"); |
| } |
| |
| ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, |
| (RESPONSE_Q_DOWN | |
| TRANS_EVENT)); |
| break; |
| |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case WAIT_IDLE: |
| vscsi->flags |= (RESPONSE_Q_DOWN | TRANS_EVENT); |
| break; |
| } |
| break; |
| |
| case PREPARE_FOR_SUSPEND: |
| dev_dbg(&vscsi->dev, "Prep for Suspend, crq status = 0x%x\n", |
| (int)crq->status); |
| switch (vscsi->state) { |
| case ERR_DISCONNECTED: |
| case WAIT_CONNECTION: |
| case CONNECTED: |
| ibmvscsis_ready_for_suspend(vscsi, false); |
| break; |
| case SRP_PROCESSING: |
| vscsi->resume_state = vscsi->state; |
| vscsi->flags |= PREP_FOR_SUSPEND_PENDING; |
| if (crq->status == CRQ_ENTRY_OVERWRITTEN) |
| vscsi->flags |= PREP_FOR_SUSPEND_OVERWRITE; |
| ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, 0); |
| break; |
| case NO_QUEUE: |
| case UNDEFINED: |
| case UNCONFIGURING: |
| case WAIT_ENABLED: |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| case WAIT_IDLE: |
| dev_err(&vscsi->dev, "Invalid state for Prepare for Suspend Trans Event: 0x%x\n", |
| vscsi->state); |
| break; |
| } |
| break; |
| |
| case RESUME_FROM_SUSP: |
| dev_dbg(&vscsi->dev, "Resume from Suspend, crq status = 0x%x\n", |
| (int)crq->status); |
| if (vscsi->flags & PREP_FOR_SUSPEND_PENDING) { |
| vscsi->flags |= PREP_FOR_SUSPEND_ABORTED; |
| } else { |
| if ((crq->status == CRQ_ENTRY_OVERWRITTEN) || |
| (vscsi->flags & PREP_FOR_SUSPEND_OVERWRITE)) { |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| 0); |
| vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE; |
| } |
| } |
| break; |
| |
| default: |
| rc = ERROR; |
| dev_err(&vscsi->dev, "trans_event: invalid format %d\n", |
| (uint)crq->format); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT, |
| RESPONSE_Q_DOWN); |
| break; |
| } |
| |
| rc = vscsi->flags & SCHEDULE_DISCONNECT; |
| |
| dev_dbg(&vscsi->dev, "Leaving trans_event: flags 0x%x, state 0x%hx, rc %ld\n", |
| vscsi->flags, vscsi->state, rc); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_poll_cmd_q() - Poll Command Queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Called to handle command elements that may have arrived while |
| * interrupts were disabled. |
| * |
| * EXECUTION ENVIRONMENT: |
| * intr_lock must be held |
| */ |
| static void ibmvscsis_poll_cmd_q(struct scsi_info *vscsi) |
| { |
| struct viosrp_crq *crq; |
| long rc; |
| bool ack = true; |
| volatile u8 valid; |
| |
| dev_dbg(&vscsi->dev, "poll_cmd_q: flags 0x%x, state 0x%hx, q index %ud\n", |
| vscsi->flags, vscsi->state, vscsi->cmd_q.index); |
| |
| rc = vscsi->flags & SCHEDULE_DISCONNECT; |
| crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index; |
| valid = crq->valid; |
| dma_rmb(); |
| |
| while (valid) { |
| poll_work: |
| vscsi->cmd_q.index = |
| (vscsi->cmd_q.index + 1) & vscsi->cmd_q.mask; |
| |
| if (!rc) { |
| rc = ibmvscsis_parse_command(vscsi, crq); |
| } else { |
| if ((uint)crq->valid == VALID_TRANS_EVENT) { |
| /* |
| * must service the transport layer events even |
| * in an error state, dont break out until all |
| * the consecutive transport events have been |
| * processed |
| */ |
| rc = ibmvscsis_trans_event(vscsi, crq); |
| } else if (vscsi->flags & TRANS_EVENT) { |
| /* |
| * if a tranport event has occurred leave |
| * everything but transport events on the queue |
| */ |
| dev_dbg(&vscsi->dev, "poll_cmd_q, ignoring\n"); |
| |
| /* |
| * need to decrement the queue index so we can |
| * look at the elment again |
| */ |
| if (vscsi->cmd_q.index) |
| vscsi->cmd_q.index -= 1; |
| else |
| /* |
| * index is at 0 it just wrapped. |
| * have it index last element in q |
| */ |
| vscsi->cmd_q.index = vscsi->cmd_q.mask; |
| break; |
| } |
| } |
| |
| crq->valid = INVALIDATE_CMD_RESP_EL; |
| |
| crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index; |
| valid = crq->valid; |
| dma_rmb(); |
| } |
| |
| if (!rc) { |
| if (ack) { |
| vio_enable_interrupts(vscsi->dma_dev); |
| ack = false; |
| dev_dbg(&vscsi->dev, "poll_cmd_q, reenabling interrupts\n"); |
| } |
| valid = crq->valid; |
| dma_rmb(); |
| if (valid) |
| goto poll_work; |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving poll_cmd_q: rc %ld\n", rc); |
| } |
| |
| /** |
| * ibmvscsis_free_cmd_qs() - Free elements in queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Free all of the elements on all queues that are waiting for |
| * whatever reason. |
| * |
| * PRECONDITION: |
| * Called with interrupt lock held |
| */ |
| static void ibmvscsis_free_cmd_qs(struct scsi_info *vscsi) |
| { |
| struct ibmvscsis_cmd *cmd, *nxt; |
| |
| dev_dbg(&vscsi->dev, "free_cmd_qs: waiting_rsp empty %d, timer starter %d\n", |
| (int)list_empty(&vscsi->waiting_rsp), |
| vscsi->rsp_q_timer.started); |
| |
| list_for_each_entry_safe(cmd, nxt, &vscsi->waiting_rsp, list) { |
| list_del(&cmd->list); |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| } |
| } |
| |
| /** |
| * ibmvscsis_get_free_cmd() - Get free command from list |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static struct ibmvscsis_cmd *ibmvscsis_get_free_cmd(struct scsi_info *vscsi) |
| { |
| struct ibmvscsis_cmd *cmd = NULL; |
| struct iu_entry *iue; |
| |
| iue = srp_iu_get(&vscsi->target); |
| if (iue) { |
| cmd = list_first_entry_or_null(&vscsi->free_cmd, |
| struct ibmvscsis_cmd, list); |
| if (cmd) { |
| if (cmd->abort_cmd) |
| cmd->abort_cmd = NULL; |
| cmd->flags &= ~(DELAY_SEND); |
| list_del(&cmd->list); |
| cmd->iue = iue; |
| cmd->type = UNSET_TYPE; |
| memset(&cmd->se_cmd, 0, sizeof(cmd->se_cmd)); |
| } else { |
| srp_iu_put(iue); |
| } |
| } |
| |
| return cmd; |
| } |
| |
| /** |
| * ibmvscsis_adapter_idle() - Helper function to handle idle adapter |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function is called when the adapter is idle when the driver |
| * is attempting to clear an error condition. |
| * The adapter is considered busy if any of its cmd queues |
| * are non-empty. This function can be invoked |
| * from the off level disconnect function. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process environment called with interrupt lock held |
| */ |
| static void ibmvscsis_adapter_idle(struct scsi_info *vscsi) |
| { |
| int free_qs = false; |
| long rc = 0; |
| |
| dev_dbg(&vscsi->dev, "adapter_idle: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| |
| /* Only need to free qs if we're disconnecting from client */ |
| if (vscsi->state != WAIT_CONNECTION || vscsi->flags & TRANS_EVENT) |
| free_qs = true; |
| |
| switch (vscsi->state) { |
| case UNCONFIGURING: |
| ibmvscsis_free_command_q(vscsi); |
| dma_rmb(); |
| isync(); |
| if (vscsi->flags & CFG_SLEEPING) { |
| vscsi->flags &= ~CFG_SLEEPING; |
| complete(&vscsi->unconfig); |
| } |
| break; |
| case ERR_DISCONNECT_RECONNECT: |
| ibmvscsis_reset_queue(vscsi); |
| dev_dbg(&vscsi->dev, "adapter_idle, disc_rec: flags 0x%x\n", |
| vscsi->flags); |
| break; |
| |
| case ERR_DISCONNECT: |
| ibmvscsis_free_command_q(vscsi); |
| vscsi->flags &= ~(SCHEDULE_DISCONNECT | DISCONNECT_SCHEDULED); |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| if (vscsi->tport.enabled) |
| vscsi->state = ERR_DISCONNECTED; |
| else |
| vscsi->state = WAIT_ENABLED; |
| dev_dbg(&vscsi->dev, "adapter_idle, disc: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| break; |
| |
| case WAIT_IDLE: |
| vscsi->rsp_q_timer.timer_pops = 0; |
| vscsi->debit = 0; |
| vscsi->credit = 0; |
| if (vscsi->flags & PREP_FOR_SUSPEND_PENDING) { |
| vscsi->state = vscsi->resume_state; |
| vscsi->resume_state = 0; |
| rc = ibmvscsis_ready_for_suspend(vscsi, true); |
| vscsi->flags &= ~DISCONNECT_SCHEDULED; |
| if (rc) |
| break; |
| } else if (vscsi->flags & TRANS_EVENT) { |
| vscsi->state = WAIT_CONNECTION; |
| vscsi->flags &= PRESERVE_FLAG_FIELDS; |
| } else { |
| vscsi->state = CONNECTED; |
| vscsi->flags &= ~DISCONNECT_SCHEDULED; |
| } |
| |
| dev_dbg(&vscsi->dev, "adapter_idle, wait: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| ibmvscsis_poll_cmd_q(vscsi); |
| break; |
| |
| case ERR_DISCONNECTED: |
| vscsi->flags &= ~DISCONNECT_SCHEDULED; |
| dev_dbg(&vscsi->dev, "adapter_idle, disconnected: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| break; |
| |
| default: |
| dev_err(&vscsi->dev, "adapter_idle: in invalid state %d\n", |
| vscsi->state); |
| break; |
| } |
| |
| if (free_qs) |
| ibmvscsis_free_cmd_qs(vscsi); |
| |
| /* |
| * There is a timing window where we could lose a disconnect request. |
| * The known path to this window occurs during the DISCONNECT_RECONNECT |
| * case above: reset_queue calls free_command_q, which will release the |
| * interrupt lock. During that time, a new post_disconnect call can be |
| * made with a "more severe" state (DISCONNECT or UNCONFIGURING). |
| * Because the DISCONNECT_SCHEDULED flag is already set, post_disconnect |
| * will only set the new_state. Now free_command_q reacquires the intr |
| * lock and clears the DISCONNECT_SCHEDULED flag (using PRESERVE_FLAG_ |
| * FIELDS), and the disconnect is lost. This is particularly bad when |
| * the new disconnect was for UNCONFIGURING, since the unconfigure hangs |
| * forever. |
| * Fix is that free command queue sets acr state and acr flags if there |
| * is a change under the lock |
| * note free command queue writes to this state it clears it |
| * before releasing the lock, different drivers call the free command |
| * queue different times so dont initialize above |
| */ |
| if (vscsi->phyp_acr_state != 0) { |
| /* |
| * set any bits in flags that may have been cleared by |
| * a call to free command queue in switch statement |
| * or reset queue |
| */ |
| vscsi->flags |= vscsi->phyp_acr_flags; |
| ibmvscsis_post_disconnect(vscsi, vscsi->phyp_acr_state, 0); |
| vscsi->phyp_acr_state = 0; |
| vscsi->phyp_acr_flags = 0; |
| |
| dev_dbg(&vscsi->dev, "adapter_idle: flags 0x%x, state 0x%hx, acr_flags 0x%x, acr_state 0x%hx\n", |
| vscsi->flags, vscsi->state, vscsi->phyp_acr_flags, |
| vscsi->phyp_acr_state); |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving adapter_idle: flags 0x%x, state 0x%hx, new_state 0x%x\n", |
| vscsi->flags, vscsi->state, vscsi->new_state); |
| } |
| |
| /** |
| * ibmvscsis_copy_crq_packet() - Copy CRQ Packet |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to command element to use to process the request |
| * @crq: Pointer to CRQ entry containing the request |
| * |
| * Copy the srp information unit from the hosted |
| * partition using remote dma |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_copy_crq_packet(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, |
| struct viosrp_crq *crq) |
| { |
| struct iu_entry *iue = cmd->iue; |
| long rc = 0; |
| u16 len; |
| |
| len = be16_to_cpu(crq->IU_length); |
| if ((len > SRP_MAX_IU_LEN) || (len == 0)) { |
| dev_err(&vscsi->dev, "copy_crq: Invalid len %d passed", len); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| return SRP_VIOLATION; |
| } |
| |
| rc = h_copy_rdma(len, vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(crq->IU_data_ptr), |
| vscsi->dds.window[LOCAL].liobn, iue->sbuf->dma); |
| |
| switch (rc) { |
| case H_SUCCESS: |
| cmd->init_time = mftb(); |
| iue->remote_token = crq->IU_data_ptr; |
| iue->iu_len = len; |
| dev_dbg(&vscsi->dev, "copy_crq: ioba 0x%llx, init_time 0x%llx\n", |
| be64_to_cpu(crq->IU_data_ptr), cmd->init_time); |
| break; |
| case H_PERMISSION: |
| if (connection_broken(vscsi)) |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| (RESPONSE_Q_DOWN | |
| CLIENT_FAILED)); |
| else |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| |
| dev_err(&vscsi->dev, "copy_crq: h_copy_rdma failed, rc %ld\n", |
| rc); |
| break; |
| case H_DEST_PARM: |
| case H_SOURCE_PARM: |
| default: |
| dev_err(&vscsi->dev, "copy_crq: h_copy_rdma failed, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_adapter_info - Service an Adapter Info MAnagement Data gram |
| * @vscsi: Pointer to our adapter structure |
| * @iue: Information Unit containing the Adapter Info MAD request |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt adapter lock is held |
| */ |
| static long ibmvscsis_adapter_info(struct scsi_info *vscsi, |
| struct iu_entry *iue) |
| { |
| struct viosrp_adapter_info *mad = &vio_iu(iue)->mad.adapter_info; |
| struct mad_adapter_info_data *info; |
| uint flag_bits = 0; |
| dma_addr_t token; |
| long rc; |
| |
| mad->common.status = cpu_to_be16(VIOSRP_MAD_SUCCESS); |
| |
| if (be16_to_cpu(mad->common.length) > sizeof(*info)) { |
| mad->common.status = cpu_to_be16(VIOSRP_MAD_FAILED); |
| return 0; |
| } |
| |
| info = dma_alloc_coherent(&vscsi->dma_dev->dev, sizeof(*info), &token, |
| GFP_ATOMIC); |
| if (!info) { |
| dev_err(&vscsi->dev, "bad dma_alloc_coherent %p\n", |
| iue->target); |
| mad->common.status = cpu_to_be16(VIOSRP_MAD_FAILED); |
| return 0; |
| } |
| |
| /* Get remote info */ |
| rc = h_copy_rdma(be16_to_cpu(mad->common.length), |
| vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(mad->buffer), |
| vscsi->dds.window[LOCAL].liobn, token); |
| |
| if (rc != H_SUCCESS) { |
| if (rc == H_PERMISSION) { |
| if (connection_broken(vscsi)) |
| flag_bits = (RESPONSE_Q_DOWN | CLIENT_FAILED); |
| } |
| dev_warn(&vscsi->dev, "adapter_info: h_copy_rdma from client failed, rc %ld\n", |
| rc); |
| dev_dbg(&vscsi->dev, "adapter_info: ioba 0x%llx, flags 0x%x, flag_bits 0x%x\n", |
| be64_to_cpu(mad->buffer), vscsi->flags, flag_bits); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| goto free_dma; |
| } |
| |
| /* |
| * Copy client info, but ignore partition number, which we |
| * already got from phyp - unless we failed to get it from |
| * phyp (e.g. if we're running on a p5 system). |
| */ |
| if (vscsi->client_data.partition_number == 0) |
| vscsi->client_data.partition_number = |
| be32_to_cpu(info->partition_number); |
| strncpy(vscsi->client_data.srp_version, info->srp_version, |
| sizeof(vscsi->client_data.srp_version)); |
| strncpy(vscsi->client_data.partition_name, info->partition_name, |
| sizeof(vscsi->client_data.partition_name)); |
| vscsi->client_data.mad_version = be32_to_cpu(info->mad_version); |
| vscsi->client_data.os_type = be32_to_cpu(info->os_type); |
| |
| /* Copy our info */ |
| strncpy(info->srp_version, SRP_VERSION, |
| sizeof(info->srp_version)); |
| strncpy(info->partition_name, vscsi->dds.partition_name, |
| sizeof(info->partition_name)); |
| info->partition_number = cpu_to_be32(vscsi->dds.partition_num); |
| info->mad_version = cpu_to_be32(MAD_VERSION_1); |
| info->os_type = cpu_to_be32(LINUX); |
| memset(&info->port_max_txu[0], 0, sizeof(info->port_max_txu)); |
| info->port_max_txu[0] = cpu_to_be32(MAX_TXU); |
| |
| dma_wmb(); |
| rc = h_copy_rdma(sizeof(*info), vscsi->dds.window[LOCAL].liobn, |
| token, vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(mad->buffer)); |
| switch (rc) { |
| case H_SUCCESS: |
| break; |
| |
| case H_SOURCE_PARM: |
| case H_DEST_PARM: |
| case H_PERMISSION: |
| if (connection_broken(vscsi)) |
| flag_bits = (RESPONSE_Q_DOWN | CLIENT_FAILED); |
| fallthrough; |
| default: |
| dev_err(&vscsi->dev, "adapter_info: h_copy_rdma to client failed, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| break; |
| } |
| |
| free_dma: |
| dma_free_coherent(&vscsi->dma_dev->dev, sizeof(*info), info, token); |
| dev_dbg(&vscsi->dev, "Leaving adapter_info, rc %ld\n", rc); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_cap_mad() - Service a Capabilities MAnagement Data gram |
| * @vscsi: Pointer to our adapter structure |
| * @iue: Information Unit containing the Capabilities MAD request |
| * |
| * NOTE: if you return an error from this routine you must be |
| * disconnecting or you will cause a hang |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt called with adapter lock held |
| */ |
| static int ibmvscsis_cap_mad(struct scsi_info *vscsi, struct iu_entry *iue) |
| { |
| struct viosrp_capabilities *mad = &vio_iu(iue)->mad.capabilities; |
| struct capabilities *cap; |
| struct mad_capability_common *common; |
| dma_addr_t token; |
| u16 olen, len, status, min_len, cap_len; |
| u32 flag; |
| uint flag_bits = 0; |
| long rc = 0; |
| |
| olen = be16_to_cpu(mad->common.length); |
| /* |
| * struct capabilities hardcodes a couple capabilities after the |
| * header, but the capabilities can actually be in any order. |
| */ |
| min_len = offsetof(struct capabilities, migration); |
| if ((olen < min_len) || (olen > PAGE_SIZE)) { |
| dev_warn(&vscsi->dev, "cap_mad: invalid len %d\n", olen); |
| mad->common.status = cpu_to_be16(VIOSRP_MAD_FAILED); |
| return 0; |
| } |
| |
| cap = dma_alloc_coherent(&vscsi->dma_dev->dev, olen, &token, |
| GFP_ATOMIC); |
| if (!cap) { |
| dev_err(&vscsi->dev, "bad dma_alloc_coherent %p\n", |
| iue->target); |
| mad->common.status = cpu_to_be16(VIOSRP_MAD_FAILED); |
| return 0; |
| } |
| rc = h_copy_rdma(olen, vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(mad->buffer), |
| vscsi->dds.window[LOCAL].liobn, token); |
| if (rc == H_SUCCESS) { |
| strncpy(cap->name, dev_name(&vscsi->dma_dev->dev), |
| SRP_MAX_LOC_LEN); |
| |
| len = olen - min_len; |
| status = VIOSRP_MAD_SUCCESS; |
| common = (struct mad_capability_common *)&cap->migration; |
| |
| while ((len > 0) && (status == VIOSRP_MAD_SUCCESS) && !rc) { |
| dev_dbg(&vscsi->dev, "cap_mad: len left %hd, cap type %d, cap len %hd\n", |
| len, be32_to_cpu(common->cap_type), |
| be16_to_cpu(common->length)); |
| |
| cap_len = be16_to_cpu(common->length); |
| if (cap_len > len) { |
| dev_err(&vscsi->dev, "cap_mad: cap len mismatch with total len\n"); |
| status = VIOSRP_MAD_FAILED; |
| break; |
| } |
| |
| if (cap_len == 0) { |
| dev_err(&vscsi->dev, "cap_mad: cap len is 0\n"); |
| status = VIOSRP_MAD_FAILED; |
| break; |
| } |
| |
| switch (common->cap_type) { |
| default: |
| dev_dbg(&vscsi->dev, "cap_mad: unsupported capability\n"); |
| common->server_support = 0; |
| flag = cpu_to_be32((u32)CAP_LIST_SUPPORTED); |
| cap->flags &= ~flag; |
| break; |
| } |
| |
| len = len - cap_len; |
| common = (struct mad_capability_common *) |
| ((char *)common + cap_len); |
| } |
| |
| mad->common.status = cpu_to_be16(status); |
| |
| dma_wmb(); |
| rc = h_copy_rdma(olen, vscsi->dds.window[LOCAL].liobn, token, |
| vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(mad->buffer)); |
| |
| if (rc != H_SUCCESS) { |
| dev_dbg(&vscsi->dev, "cap_mad: failed to copy to client, rc %ld\n", |
| rc); |
| |
| if (rc == H_PERMISSION) { |
| if (connection_broken(vscsi)) |
| flag_bits = (RESPONSE_Q_DOWN | |
| CLIENT_FAILED); |
| } |
| |
| dev_warn(&vscsi->dev, "cap_mad: error copying data to client, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| } |
| } |
| |
| dma_free_coherent(&vscsi->dma_dev->dev, olen, cap, token); |
| |
| dev_dbg(&vscsi->dev, "Leaving cap_mad, rc %ld, client_cap 0x%x\n", |
| rc, vscsi->client_cap); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_process_mad() - Service a MAnagement Data gram |
| * @vscsi: Pointer to our adapter structure |
| * @iue: Information Unit containing the MAD request |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static long ibmvscsis_process_mad(struct scsi_info *vscsi, struct iu_entry *iue) |
| { |
| struct mad_common *mad = (struct mad_common *)&vio_iu(iue)->mad; |
| struct viosrp_empty_iu *empty; |
| long rc = ADAPT_SUCCESS; |
| |
| switch (be32_to_cpu(mad->type)) { |
| case VIOSRP_EMPTY_IU_TYPE: |
| empty = &vio_iu(iue)->mad.empty_iu; |
| vscsi->empty_iu_id = be64_to_cpu(empty->buffer); |
| vscsi->empty_iu_tag = be64_to_cpu(empty->common.tag); |
| mad->status = cpu_to_be16(VIOSRP_MAD_SUCCESS); |
| break; |
| case VIOSRP_ADAPTER_INFO_TYPE: |
| rc = ibmvscsis_adapter_info(vscsi, iue); |
| break; |
| case VIOSRP_CAPABILITIES_TYPE: |
| rc = ibmvscsis_cap_mad(vscsi, iue); |
| break; |
| case VIOSRP_ENABLE_FAST_FAIL: |
| if (vscsi->state == CONNECTED) { |
| vscsi->fast_fail = true; |
| mad->status = cpu_to_be16(VIOSRP_MAD_SUCCESS); |
| } else { |
| dev_warn(&vscsi->dev, "fast fail mad sent after login\n"); |
| mad->status = cpu_to_be16(VIOSRP_MAD_FAILED); |
| } |
| break; |
| default: |
| mad->status = cpu_to_be16(VIOSRP_MAD_NOT_SUPPORTED); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * srp_snd_msg_failed() - Handle an error when sending a response |
| * @vscsi: Pointer to our adapter structure |
| * @rc: The return code from the h_send_crq command |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static void srp_snd_msg_failed(struct scsi_info *vscsi, long rc) |
| { |
| ktime_t kt; |
| |
| if (rc != H_DROPPED) { |
| ibmvscsis_free_cmd_qs(vscsi); |
| |
| if (rc == H_CLOSED) |
| vscsi->flags |= CLIENT_FAILED; |
| |
| /* don't flag the same problem multiple times */ |
| if (!(vscsi->flags & RESPONSE_Q_DOWN)) { |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| if (!(vscsi->state & (ERR_DISCONNECT | |
| ERR_DISCONNECT_RECONNECT | |
| ERR_DISCONNECTED | UNDEFINED))) { |
| dev_err(&vscsi->dev, "snd_msg_failed: setting RESPONSE_Q_DOWN, state 0x%hx, flags 0x%x, rc %ld\n", |
| vscsi->state, vscsi->flags, rc); |
| } |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| } |
| return; |
| } |
| |
| /* |
| * The response queue is full. |
| * If the server is processing SRP requests, i.e. |
| * the client has successfully done an |
| * SRP_LOGIN, then it will wait forever for room in |
| * the queue. However if the system admin |
| * is attempting to unconfigure the server then one |
| * or more children will be in a state where |
| * they are being removed. So if there is even one |
| * child being removed then the driver assumes |
| * the system admin is attempting to break the |
| * connection with the client and MAX_TIMER_POPS |
| * is honored. |
| */ |
| if ((vscsi->rsp_q_timer.timer_pops < MAX_TIMER_POPS) || |
| (vscsi->state == SRP_PROCESSING)) { |
| dev_dbg(&vscsi->dev, "snd_msg_failed: response queue full, flags 0x%x, timer started %d, pops %d\n", |
| vscsi->flags, (int)vscsi->rsp_q_timer.started, |
| vscsi->rsp_q_timer.timer_pops); |
| |
| /* |
| * Check if the timer is running; if it |
| * is not then start it up. |
| */ |
| if (!vscsi->rsp_q_timer.started) { |
| if (vscsi->rsp_q_timer.timer_pops < |
| MAX_TIMER_POPS) { |
| kt = WAIT_NANO_SECONDS; |
| } else { |
| /* |
| * slide the timeslice if the maximum |
| * timer pops have already happened |
| */ |
| kt = ktime_set(WAIT_SECONDS, 0); |
| } |
| |
| vscsi->rsp_q_timer.started = true; |
| hrtimer_start(&vscsi->rsp_q_timer.timer, kt, |
| HRTIMER_MODE_REL); |
| } |
| } else { |
| /* |
| * TBD: Do we need to worry about this? Need to get |
| * remove working. |
| */ |
| /* |
| * waited a long time and it appears the system admin |
| * is bring this driver down |
| */ |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| ibmvscsis_free_cmd_qs(vscsi); |
| /* |
| * if the driver is already attempting to disconnect |
| * from the client and has already logged an error |
| * trace this event but don't put it in the error log |
| */ |
| if (!(vscsi->state & (ERR_DISCONNECT | |
| ERR_DISCONNECT_RECONNECT | |
| ERR_DISCONNECTED | UNDEFINED))) { |
| dev_err(&vscsi->dev, "client crq full too long\n"); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| 0); |
| } |
| } |
| } |
| |
| /** |
| * ibmvscsis_send_messages() - Send a Response |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Send a response, first checking the waiting queue. Responses are |
| * sent in order they are received. If the response cannot be sent, |
| * because the client queue is full, it stays on the waiting queue. |
| * |
| * PRECONDITION: |
| * Called with interrupt lock held |
| */ |
| static void ibmvscsis_send_messages(struct scsi_info *vscsi) |
| { |
| struct viosrp_crq empty_crq = { }; |
| struct viosrp_crq *crq = &empty_crq; |
| struct ibmvscsis_cmd *cmd, *nxt; |
| long rc = ADAPT_SUCCESS; |
| bool retry = false; |
| |
| if (!(vscsi->flags & RESPONSE_Q_DOWN)) { |
| do { |
| retry = false; |
| list_for_each_entry_safe(cmd, nxt, &vscsi->waiting_rsp, |
| list) { |
| /* |
| * Check to make sure abort cmd gets processed |
| * prior to the abort tmr cmd |
| */ |
| if (cmd->flags & DELAY_SEND) |
| continue; |
| |
| if (cmd->abort_cmd) { |
| retry = true; |
| cmd->abort_cmd->flags &= ~(DELAY_SEND); |
| cmd->abort_cmd = NULL; |
| } |
| |
| /* |
| * If CMD_T_ABORTED w/o CMD_T_TAS scenarios and |
| * the case where LIO issued a |
| * ABORT_TASK: Sending TMR_TASK_DOES_NOT_EXIST |
| * case then we dont send a response, since it |
| * was already done. |
| */ |
| if (cmd->se_cmd.transport_state & CMD_T_ABORTED && |
| !(cmd->se_cmd.transport_state & CMD_T_TAS)) { |
| list_del(&cmd->list); |
| ibmvscsis_free_cmd_resources(vscsi, |
| cmd); |
| /* |
| * With a successfully aborted op |
| * through LIO we want to increment the |
| * the vscsi credit so that when we dont |
| * send a rsp to the original scsi abort |
| * op (h_send_crq), but the tm rsp to |
| * the abort is sent, the credit is |
| * correctly sent with the abort tm rsp. |
| * We would need 1 for the abort tm rsp |
| * and 1 credit for the aborted scsi op. |
| * Thus we need to increment here. |
| * Also we want to increment the credit |
| * here because we want to make sure |
| * cmd is actually released first |
| * otherwise the client will think it |
| * it can send a new cmd, and we could |
| * find ourselves short of cmd elements. |
| */ |
| vscsi->credit += 1; |
| } else { |
| crq->valid = VALID_CMD_RESP_EL; |
| crq->format = cmd->rsp.format; |
| |
| if (cmd->flags & CMD_FAST_FAIL) |
| crq->status = VIOSRP_ADAPTER_FAIL; |
| |
| crq->IU_length = cpu_to_be16(cmd->rsp.len); |
| |
| rc = h_send_crq(vscsi->dma_dev->unit_address, |
| be64_to_cpu(crq->high), |
| be64_to_cpu(cmd->rsp.tag)); |
| |
| dev_dbg(&vscsi->dev, "send_messages: cmd %p, tag 0x%llx, rc %ld\n", |
| cmd, be64_to_cpu(cmd->rsp.tag), |
| rc); |
| |
| /* if all ok free up the command |
| * element resources |
| */ |
| if (rc == H_SUCCESS) { |
| /* some movement has occurred */ |
| vscsi->rsp_q_timer.timer_pops = 0; |
| list_del(&cmd->list); |
| |
| ibmvscsis_free_cmd_resources(vscsi, |
| cmd); |
| } else { |
| srp_snd_msg_failed(vscsi, rc); |
| break; |
| } |
| } |
| } |
| } while (retry); |
| |
| if (!rc) { |
| /* |
| * The timer could pop with the queue empty. If |
| * this happens, rc will always indicate a |
| * success; clear the pop count. |
| */ |
| vscsi->rsp_q_timer.timer_pops = 0; |
| } |
| } else { |
| ibmvscsis_free_cmd_qs(vscsi); |
| } |
| } |
| |
| /* Called with intr lock held */ |
| static void ibmvscsis_send_mad_resp(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, |
| struct viosrp_crq *crq) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct mad_common *mad = (struct mad_common *)&vio_iu(iue)->mad; |
| uint flag_bits = 0; |
| long rc; |
| |
| dma_wmb(); |
| rc = h_copy_rdma(sizeof(struct mad_common), |
| vscsi->dds.window[LOCAL].liobn, iue->sbuf->dma, |
| vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(crq->IU_data_ptr)); |
| if (!rc) { |
| cmd->rsp.format = VIOSRP_MAD_FORMAT; |
| cmd->rsp.len = sizeof(struct mad_common); |
| cmd->rsp.tag = mad->tag; |
| list_add_tail(&cmd->list, &vscsi->waiting_rsp); |
| ibmvscsis_send_messages(vscsi); |
| } else { |
| dev_dbg(&vscsi->dev, "Error sending mad response, rc %ld\n", |
| rc); |
| if (rc == H_PERMISSION) { |
| if (connection_broken(vscsi)) |
| flag_bits = (RESPONSE_Q_DOWN | CLIENT_FAILED); |
| } |
| dev_err(&vscsi->dev, "mad: failed to copy to client, rc %ld\n", |
| rc); |
| |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| } |
| } |
| |
| /** |
| * ibmvscsis_mad() - Service a MAnagement Data gram. |
| * @vscsi: Pointer to our adapter structure |
| * @crq: Pointer to the CRQ entry containing the MAD request |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, called with adapter lock held |
| */ |
| static long ibmvscsis_mad(struct scsi_info *vscsi, struct viosrp_crq *crq) |
| { |
| struct iu_entry *iue; |
| struct ibmvscsis_cmd *cmd; |
| struct mad_common *mad; |
| long rc = ADAPT_SUCCESS; |
| |
| switch (vscsi->state) { |
| /* |
| * We have not exchanged Init Msgs yet, so this MAD was sent |
| * before the last Transport Event; client will not be |
| * expecting a response. |
| */ |
| case WAIT_CONNECTION: |
| dev_dbg(&vscsi->dev, "mad: in Wait Connection state, ignoring MAD, flags %d\n", |
| vscsi->flags); |
| return ADAPT_SUCCESS; |
| |
| case SRP_PROCESSING: |
| case CONNECTED: |
| break; |
| |
| /* |
| * We should never get here while we're in these states. |
| * Just log an error and get out. |
| */ |
| case UNCONFIGURING: |
| case WAIT_IDLE: |
| case ERR_DISCONNECT: |
| case ERR_DISCONNECT_RECONNECT: |
| default: |
| dev_err(&vscsi->dev, "mad: invalid adapter state %d for mad\n", |
| vscsi->state); |
| return ADAPT_SUCCESS; |
| } |
| |
| cmd = ibmvscsis_get_free_cmd(vscsi); |
| if (!cmd) { |
| dev_err(&vscsi->dev, "mad: failed to get cmd, debit %d\n", |
| vscsi->debit); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| return ERROR; |
| } |
| iue = cmd->iue; |
| cmd->type = ADAPTER_MAD; |
| |
| rc = ibmvscsis_copy_crq_packet(vscsi, cmd, crq); |
| if (!rc) { |
| mad = (struct mad_common *)&vio_iu(iue)->mad; |
| |
| dev_dbg(&vscsi->dev, "mad: type %d\n", be32_to_cpu(mad->type)); |
| |
| rc = ibmvscsis_process_mad(vscsi, iue); |
| |
| dev_dbg(&vscsi->dev, "mad: status %hd, rc %ld\n", |
| be16_to_cpu(mad->status), rc); |
| |
| if (!rc) |
| ibmvscsis_send_mad_resp(vscsi, cmd, crq); |
| } else { |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving mad, rc %ld\n", rc); |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_login_rsp() - Create/copy a login response notice to the client |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to the command for the SRP Login request |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_login_rsp(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_login_rsp *rsp = &vio_iu(iue)->srp.login_rsp; |
| struct format_code *fmt; |
| uint flag_bits = 0; |
| long rc = ADAPT_SUCCESS; |
| |
| memset(rsp, 0, sizeof(struct srp_login_rsp)); |
| |
| rsp->opcode = SRP_LOGIN_RSP; |
| rsp->req_lim_delta = cpu_to_be32(vscsi->request_limit); |
| rsp->tag = cmd->rsp.tag; |
| rsp->max_it_iu_len = cpu_to_be32(SRP_MAX_IU_LEN); |
| rsp->max_ti_iu_len = cpu_to_be32(SRP_MAX_IU_LEN); |
| fmt = (struct format_code *)&rsp->buf_fmt; |
| fmt->buffers = SUPPORTED_FORMATS; |
| vscsi->credit = 0; |
| |
| cmd->rsp.len = sizeof(struct srp_login_rsp); |
| |
| dma_wmb(); |
| rc = h_copy_rdma(cmd->rsp.len, vscsi->dds.window[LOCAL].liobn, |
| iue->sbuf->dma, vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(iue->remote_token)); |
| |
| switch (rc) { |
| case H_SUCCESS: |
| break; |
| |
| case H_PERMISSION: |
| if (connection_broken(vscsi)) |
| flag_bits = RESPONSE_Q_DOWN | CLIENT_FAILED; |
| dev_err(&vscsi->dev, "login_rsp: error copying to client, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| break; |
| case H_SOURCE_PARM: |
| case H_DEST_PARM: |
| default: |
| dev_err(&vscsi->dev, "login_rsp: error copying to client, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_srp_login_rej() - Create/copy a login rejection notice to client |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to the command for the SRP Login request |
| * @reason: The reason the SRP Login is being rejected, per SRP protocol |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_srp_login_rej(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, u32 reason) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_login_rej *rej = &vio_iu(iue)->srp.login_rej; |
| struct format_code *fmt; |
| uint flag_bits = 0; |
| long rc = ADAPT_SUCCESS; |
| |
| memset(rej, 0, sizeof(*rej)); |
| |
| rej->opcode = SRP_LOGIN_REJ; |
| rej->reason = cpu_to_be32(reason); |
| rej->tag = cmd->rsp.tag; |
| fmt = (struct format_code *)&rej->buf_fmt; |
| fmt->buffers = SUPPORTED_FORMATS; |
| |
| cmd->rsp.len = sizeof(*rej); |
| |
| dma_wmb(); |
| rc = h_copy_rdma(cmd->rsp.len, vscsi->dds.window[LOCAL].liobn, |
| iue->sbuf->dma, vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(iue->remote_token)); |
| |
| switch (rc) { |
| case H_SUCCESS: |
| break; |
| case H_PERMISSION: |
| if (connection_broken(vscsi)) |
| flag_bits = RESPONSE_Q_DOWN | CLIENT_FAILED; |
| dev_err(&vscsi->dev, "login_rej: error copying to client, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, |
| flag_bits); |
| break; |
| case H_SOURCE_PARM: |
| case H_DEST_PARM: |
| default: |
| dev_err(&vscsi->dev, "login_rej: error copying to client, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static int ibmvscsis_make_nexus(struct ibmvscsis_tport *tport) |
| { |
| char *name = tport->tport_name; |
| struct ibmvscsis_nexus *nexus; |
| struct scsi_info *vscsi = container_of(tport, struct scsi_info, tport); |
| int rc; |
| |
| if (tport->ibmv_nexus) { |
| dev_dbg(&vscsi->dev, "tport->ibmv_nexus already exists\n"); |
| return 0; |
| } |
| |
| nexus = kzalloc(sizeof(*nexus), GFP_KERNEL); |
| if (!nexus) { |
| dev_err(&vscsi->dev, "Unable to allocate struct ibmvscsis_nexus\n"); |
| return -ENOMEM; |
| } |
| |
| nexus->se_sess = target_setup_session(&tport->se_tpg, 0, 0, |
| TARGET_PROT_NORMAL, name, nexus, |
| NULL); |
| if (IS_ERR(nexus->se_sess)) { |
| rc = PTR_ERR(nexus->se_sess); |
| goto transport_init_fail; |
| } |
| |
| tport->ibmv_nexus = nexus; |
| |
| return 0; |
| |
| transport_init_fail: |
| kfree(nexus); |
| return rc; |
| } |
| |
| static int ibmvscsis_drop_nexus(struct ibmvscsis_tport *tport) |
| { |
| struct se_session *se_sess; |
| struct ibmvscsis_nexus *nexus; |
| |
| nexus = tport->ibmv_nexus; |
| if (!nexus) |
| return -ENODEV; |
| |
| se_sess = nexus->se_sess; |
| if (!se_sess) |
| return -ENODEV; |
| |
| /* |
| * Release the SCSI I_T Nexus to the emulated ibmvscsis Target Port |
| */ |
| target_remove_session(se_sess); |
| tport->ibmv_nexus = NULL; |
| kfree(nexus); |
| |
| return 0; |
| } |
| |
| /** |
| * ibmvscsis_srp_login() - Process an SRP Login Request |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Command element to use to process the SRP Login request |
| * @crq: Pointer to CRQ entry containing the SRP Login request |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, called with interrupt lock held |
| */ |
| static long ibmvscsis_srp_login(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, |
| struct viosrp_crq *crq) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_login_req *req = &vio_iu(iue)->srp.login_req; |
| struct port_id { |
| __be64 id_extension; |
| __be64 io_guid; |
| } *iport, *tport; |
| struct format_code *fmt; |
| u32 reason = 0x0; |
| long rc = ADAPT_SUCCESS; |
| |
| iport = (struct port_id *)req->initiator_port_id; |
| tport = (struct port_id *)req->target_port_id; |
| fmt = (struct format_code *)&req->req_buf_fmt; |
| if (be32_to_cpu(req->req_it_iu_len) > SRP_MAX_IU_LEN) |
| reason = SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE; |
| else if (be32_to_cpu(req->req_it_iu_len) < 64) |
| reason = SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL; |
| else if ((be64_to_cpu(iport->id_extension) > (MAX_NUM_PORTS - 1)) || |
| (be64_to_cpu(tport->id_extension) > (MAX_NUM_PORTS - 1))) |
| reason = SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL; |
| else if (req->req_flags & SRP_MULTICHAN_MULTI) |
| reason = SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED; |
| else if (fmt->buffers & (~SUPPORTED_FORMATS)) |
| reason = SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT; |
| else if ((fmt->buffers & SUPPORTED_FORMATS) == 0) |
| reason = SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT; |
| |
| if (vscsi->state == SRP_PROCESSING) |
| reason = SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED; |
| |
| rc = ibmvscsis_make_nexus(&vscsi->tport); |
| if (rc) |
| reason = SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL; |
| |
| cmd->rsp.format = VIOSRP_SRP_FORMAT; |
| cmd->rsp.tag = req->tag; |
| |
| dev_dbg(&vscsi->dev, "srp_login: reason 0x%x\n", reason); |
| |
| if (reason) |
| rc = ibmvscsis_srp_login_rej(vscsi, cmd, reason); |
| else |
| rc = ibmvscsis_login_rsp(vscsi, cmd); |
| |
| if (!rc) { |
| if (!reason) |
| vscsi->state = SRP_PROCESSING; |
| |
| list_add_tail(&cmd->list, &vscsi->waiting_rsp); |
| ibmvscsis_send_messages(vscsi); |
| } else { |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving srp_login, rc %ld\n", rc); |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_srp_i_logout() - Helper Function to close I_T Nexus |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Command element to use to process the Implicit Logout request |
| * @crq: Pointer to CRQ entry containing the Implicit Logout request |
| * |
| * Do the logic to close the I_T nexus. This function may not |
| * behave to specification. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_srp_i_logout(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, |
| struct viosrp_crq *crq) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_i_logout *log_out = &vio_iu(iue)->srp.i_logout; |
| |
| if ((vscsi->debit > 0) || !list_empty(&vscsi->schedule_q) || |
| !list_empty(&vscsi->waiting_rsp)) { |
| dev_err(&vscsi->dev, "i_logout: outstanding work\n"); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT, 0); |
| } else { |
| cmd->rsp.format = SRP_FORMAT; |
| cmd->rsp.tag = log_out->tag; |
| cmd->rsp.len = sizeof(struct mad_common); |
| list_add_tail(&cmd->list, &vscsi->waiting_rsp); |
| ibmvscsis_send_messages(vscsi); |
| |
| ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, 0); |
| } |
| |
| return ADAPT_SUCCESS; |
| } |
| |
| /* Called with intr lock held */ |
| static void ibmvscsis_srp_cmd(struct scsi_info *vscsi, struct viosrp_crq *crq) |
| { |
| struct ibmvscsis_cmd *cmd; |
| struct iu_entry *iue; |
| struct srp_cmd *srp; |
| struct srp_tsk_mgmt *tsk; |
| long rc; |
| |
| if (vscsi->request_limit - vscsi->debit <= 0) { |
| /* Client has exceeded request limit */ |
| dev_err(&vscsi->dev, "Client exceeded the request limit (%d), debit %d\n", |
| vscsi->request_limit, vscsi->debit); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| return; |
| } |
| |
| cmd = ibmvscsis_get_free_cmd(vscsi); |
| if (!cmd) { |
| dev_err(&vscsi->dev, "srp_cmd failed to get cmd, debit %d\n", |
| vscsi->debit); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| return; |
| } |
| iue = cmd->iue; |
| srp = &vio_iu(iue)->srp.cmd; |
| |
| rc = ibmvscsis_copy_crq_packet(vscsi, cmd, crq); |
| if (rc) { |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| return; |
| } |
| |
| if (vscsi->state == SRP_PROCESSING) { |
| switch (srp->opcode) { |
| case SRP_LOGIN_REQ: |
| rc = ibmvscsis_srp_login(vscsi, cmd, crq); |
| break; |
| |
| case SRP_TSK_MGMT: |
| tsk = &vio_iu(iue)->srp.tsk_mgmt; |
| dev_dbg(&vscsi->dev, "tsk_mgmt tag: %llu (0x%llx)\n", |
| tsk->tag, tsk->tag); |
| cmd->rsp.tag = tsk->tag; |
| vscsi->debit += 1; |
| cmd->type = TASK_MANAGEMENT; |
| list_add_tail(&cmd->list, &vscsi->schedule_q); |
| queue_work(vscsi->work_q, &cmd->work); |
| break; |
| |
| case SRP_CMD: |
| dev_dbg(&vscsi->dev, "srp_cmd tag: %llu (0x%llx)\n", |
| srp->tag, srp->tag); |
| cmd->rsp.tag = srp->tag; |
| vscsi->debit += 1; |
| cmd->type = SCSI_CDB; |
| /* |
| * We want to keep track of work waiting for |
| * the workqueue. |
| */ |
| list_add_tail(&cmd->list, &vscsi->schedule_q); |
| queue_work(vscsi->work_q, &cmd->work); |
| break; |
| |
| case SRP_I_LOGOUT: |
| rc = ibmvscsis_srp_i_logout(vscsi, cmd, crq); |
| break; |
| |
| case SRP_CRED_RSP: |
| case SRP_AER_RSP: |
| default: |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| dev_err(&vscsi->dev, "invalid srp cmd, opcode %d\n", |
| (uint)srp->opcode); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| } else if (srp->opcode == SRP_LOGIN_REQ && vscsi->state == CONNECTED) { |
| rc = ibmvscsis_srp_login(vscsi, cmd, crq); |
| } else { |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| dev_err(&vscsi->dev, "Invalid state %d to handle srp cmd\n", |
| vscsi->state); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| } |
| } |
| |
| /** |
| * ibmvscsis_ping_response() - Respond to a ping request |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Let the client know that the server is alive and waiting on |
| * its native I/O stack. |
| * If any type of error occurs from the call to queue a ping |
| * response then the client is either not accepting or receiving |
| * interrupts. Disconnect with an error. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, interrupt lock held |
| */ |
| static long ibmvscsis_ping_response(struct scsi_info *vscsi) |
| { |
| struct viosrp_crq *crq; |
| u64 buffer[2] = { 0, 0 }; |
| long rc; |
| |
| crq = (struct viosrp_crq *)&buffer; |
| crq->valid = VALID_CMD_RESP_EL; |
| crq->format = (u8)MESSAGE_IN_CRQ; |
| crq->status = PING_RESPONSE; |
| |
| rc = h_send_crq(vscsi->dds.unit_id, cpu_to_be64(buffer[MSG_HI]), |
| cpu_to_be64(buffer[MSG_LOW])); |
| |
| switch (rc) { |
| case H_SUCCESS: |
| break; |
| case H_CLOSED: |
| vscsi->flags |= CLIENT_FAILED; |
| fallthrough; |
| case H_DROPPED: |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| fallthrough; |
| case H_REMOTE_PARM: |
| dev_err(&vscsi->dev, "ping_response: h_send_crq failed, rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| default: |
| dev_err(&vscsi->dev, "ping_response: h_send_crq returned unknown rc %ld\n", |
| rc); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT, 0); |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_parse_command() - Parse an element taken from the cmd rsp queue. |
| * @vscsi: Pointer to our adapter structure |
| * @crq: Pointer to CRQ element containing the SRP request |
| * |
| * This function will return success if the command queue element is valid |
| * and the srp iu or MAD request it pointed to was also valid. That does |
| * not mean that an error was not returned to the client. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Interrupt, intr lock held |
| */ |
| static long ibmvscsis_parse_command(struct scsi_info *vscsi, |
| struct viosrp_crq *crq) |
| { |
| long rc = ADAPT_SUCCESS; |
| |
| switch (crq->valid) { |
| case VALID_CMD_RESP_EL: |
| switch (crq->format) { |
| case OS400_FORMAT: |
| case AIX_FORMAT: |
| case LINUX_FORMAT: |
| case MAD_FORMAT: |
| if (vscsi->flags & PROCESSING_MAD) { |
| rc = ERROR; |
| dev_err(&vscsi->dev, "parse_command: already processing mad\n"); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, |
| 0); |
| } else { |
| vscsi->flags |= PROCESSING_MAD; |
| rc = ibmvscsis_mad(vscsi, crq); |
| } |
| break; |
| |
| case SRP_FORMAT: |
| ibmvscsis_srp_cmd(vscsi, crq); |
| break; |
| |
| case MESSAGE_IN_CRQ: |
| if (crq->status == PING) |
| ibmvscsis_ping_response(vscsi); |
| break; |
| |
| default: |
| dev_err(&vscsi->dev, "parse_command: invalid format %d\n", |
| (uint)crq->format); |
| ibmvscsis_post_disconnect(vscsi, |
| ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| break; |
| |
| case VALID_TRANS_EVENT: |
| rc = ibmvscsis_trans_event(vscsi, crq); |
| break; |
| |
| case VALID_INIT_MSG: |
| rc = ibmvscsis_init_msg(vscsi, crq); |
| break; |
| |
| default: |
| dev_err(&vscsi->dev, "parse_command: invalid valid field %d\n", |
| (uint)crq->valid); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| break; |
| } |
| |
| /* |
| * Return only what the interrupt handler cares |
| * about. Most errors we keep right on trucking. |
| */ |
| rc = vscsi->flags & SCHEDULE_DISCONNECT; |
| |
| return rc; |
| } |
| |
| static int read_dma_window(struct scsi_info *vscsi) |
| { |
| struct vio_dev *vdev = vscsi->dma_dev; |
| const __be32 *dma_window; |
| const __be32 *prop; |
| |
| /* TODO Using of_parse_dma_window would be better, but it doesn't give |
| * a way to read multiple windows without already knowing the size of |
| * a window or the number of windows. |
| */ |
| dma_window = (const __be32 *)vio_get_attribute(vdev, |
| "ibm,my-dma-window", |
| NULL); |
| if (!dma_window) { |
| dev_err(&vscsi->dev, "Couldn't find ibm,my-dma-window property\n"); |
| return -1; |
| } |
| |
| vscsi->dds.window[LOCAL].liobn = be32_to_cpu(*dma_window); |
| dma_window++; |
| |
| prop = (const __be32 *)vio_get_attribute(vdev, "ibm,#dma-address-cells", |
| NULL); |
| if (!prop) { |
| dev_warn(&vscsi->dev, "Couldn't find ibm,#dma-address-cells property\n"); |
| dma_window++; |
| } else { |
| dma_window += be32_to_cpu(*prop); |
| } |
| |
| prop = (const __be32 *)vio_get_attribute(vdev, "ibm,#dma-size-cells", |
| NULL); |
| if (!prop) { |
| dev_warn(&vscsi->dev, "Couldn't find ibm,#dma-size-cells property\n"); |
| dma_window++; |
| } else { |
| dma_window += be32_to_cpu(*prop); |
| } |
| |
| /* dma_window should point to the second window now */ |
| vscsi->dds.window[REMOTE].liobn = be32_to_cpu(*dma_window); |
| |
| return 0; |
| } |
| |
| static struct ibmvscsis_tport *ibmvscsis_lookup_port(const char *name) |
| { |
| struct ibmvscsis_tport *tport = NULL; |
| struct vio_dev *vdev; |
| struct scsi_info *vscsi; |
| |
| spin_lock_bh(&ibmvscsis_dev_lock); |
| list_for_each_entry(vscsi, &ibmvscsis_dev_list, list) { |
| vdev = vscsi->dma_dev; |
| if (!strcmp(dev_name(&vdev->dev), name)) { |
| tport = &vscsi->tport; |
| break; |
| } |
| } |
| spin_unlock_bh(&ibmvscsis_dev_lock); |
| |
| return tport; |
| } |
| |
| /** |
| * ibmvscsis_parse_cmd() - Parse SRP Command |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to command element with SRP command |
| * |
| * Parse the srp command; if it is valid then submit it to tcm. |
| * Note: The return code does not reflect the status of the SCSI CDB. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level |
| */ |
| static void ibmvscsis_parse_cmd(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_cmd *srp = (struct srp_cmd *)iue->sbuf->buf; |
| struct ibmvscsis_nexus *nexus; |
| u64 data_len = 0; |
| enum dma_data_direction dir; |
| int attr = 0; |
| |
| nexus = vscsi->tport.ibmv_nexus; |
| /* |
| * additional length in bytes. Note that the SRP spec says that |
| * additional length is in 4-byte words, but technically the |
| * additional length field is only the upper 6 bits of the byte. |
| * The lower 2 bits are reserved. If the lower 2 bits are 0 (as |
| * all reserved fields should be), then interpreting the byte as |
| * an int will yield the length in bytes. |
| */ |
| if (srp->add_cdb_len & 0x03) { |
| dev_err(&vscsi->dev, "parse_cmd: reserved bits set in IU\n"); |
| spin_lock_bh(&vscsi->intr_lock); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| spin_unlock_bh(&vscsi->intr_lock); |
| return; |
| } |
| |
| if (srp_get_desc_table(srp, &dir, &data_len)) { |
| dev_err(&vscsi->dev, "0x%llx: parsing SRP descriptor table failed.\n", |
| srp->tag); |
| goto fail; |
| } |
| |
| cmd->rsp.sol_not = srp->sol_not; |
| |
| switch (srp->task_attr) { |
| case SRP_SIMPLE_TASK: |
| attr = TCM_SIMPLE_TAG; |
| break; |
| case SRP_ORDERED_TASK: |
| attr = TCM_ORDERED_TAG; |
| break; |
| case SRP_HEAD_TASK: |
| attr = TCM_HEAD_TAG; |
| break; |
| case SRP_ACA_TASK: |
| attr = TCM_ACA_TAG; |
| break; |
| default: |
| dev_err(&vscsi->dev, "Invalid task attribute %d\n", |
| srp->task_attr); |
| goto fail; |
| } |
| |
| cmd->se_cmd.tag = be64_to_cpu(srp->tag); |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| list_add_tail(&cmd->list, &vscsi->active_q); |
| spin_unlock_bh(&vscsi->intr_lock); |
| |
| srp->lun.scsi_lun[0] &= 0x3f; |
| |
| target_submit_cmd(&cmd->se_cmd, nexus->se_sess, srp->cdb, |
| cmd->sense_buf, scsilun_to_int(&srp->lun), |
| data_len, attr, dir, 0); |
| return; |
| |
| fail: |
| spin_lock_bh(&vscsi->intr_lock); |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT_RECONNECT, 0); |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| /** |
| * ibmvscsis_parse_task() - Parse SRP Task Management Request |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to command element with SRP task management request |
| * |
| * Parse the srp task management request; if it is valid then submit it to tcm. |
| * Note: The return code does not reflect the status of the task management |
| * request. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Processor level |
| */ |
| static void ibmvscsis_parse_task(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_tsk_mgmt *srp_tsk = &vio_iu(iue)->srp.tsk_mgmt; |
| int tcm_type; |
| u64 tag_to_abort = 0; |
| int rc = 0; |
| struct ibmvscsis_nexus *nexus; |
| |
| nexus = vscsi->tport.ibmv_nexus; |
| |
| cmd->rsp.sol_not = srp_tsk->sol_not; |
| |
| switch (srp_tsk->tsk_mgmt_func) { |
| case SRP_TSK_ABORT_TASK: |
| tcm_type = TMR_ABORT_TASK; |
| tag_to_abort = be64_to_cpu(srp_tsk->task_tag); |
| break; |
| case SRP_TSK_ABORT_TASK_SET: |
| tcm_type = TMR_ABORT_TASK_SET; |
| break; |
| case SRP_TSK_CLEAR_TASK_SET: |
| tcm_type = TMR_CLEAR_TASK_SET; |
| break; |
| case SRP_TSK_LUN_RESET: |
| tcm_type = TMR_LUN_RESET; |
| break; |
| case SRP_TSK_CLEAR_ACA: |
| tcm_type = TMR_CLEAR_ACA; |
| break; |
| default: |
| dev_err(&vscsi->dev, "unknown task mgmt func %d\n", |
| srp_tsk->tsk_mgmt_func); |
| cmd->se_cmd.se_tmr_req->response = |
| TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED; |
| rc = -1; |
| break; |
| } |
| |
| if (!rc) { |
| cmd->se_cmd.tag = be64_to_cpu(srp_tsk->tag); |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| list_add_tail(&cmd->list, &vscsi->active_q); |
| spin_unlock_bh(&vscsi->intr_lock); |
| |
| srp_tsk->lun.scsi_lun[0] &= 0x3f; |
| |
| dev_dbg(&vscsi->dev, "calling submit_tmr, func %d\n", |
| srp_tsk->tsk_mgmt_func); |
| rc = target_submit_tmr(&cmd->se_cmd, nexus->se_sess, NULL, |
| scsilun_to_int(&srp_tsk->lun), srp_tsk, |
| tcm_type, GFP_KERNEL, tag_to_abort, 0); |
| if (rc) { |
| dev_err(&vscsi->dev, "target_submit_tmr failed, rc %d\n", |
| rc); |
| spin_lock_bh(&vscsi->intr_lock); |
| list_del(&cmd->list); |
| spin_unlock_bh(&vscsi->intr_lock); |
| cmd->se_cmd.se_tmr_req->response = |
| TMR_FUNCTION_REJECTED; |
| } |
| } |
| |
| if (rc) |
| transport_send_check_condition_and_sense(&cmd->se_cmd, 0, 0); |
| } |
| |
| static void ibmvscsis_scheduler(struct work_struct *work) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(work, struct ibmvscsis_cmd, |
| work); |
| struct scsi_info *vscsi = cmd->adapter; |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| |
| /* Remove from schedule_q */ |
| list_del(&cmd->list); |
| |
| /* Don't submit cmd if we're disconnecting */ |
| if (vscsi->flags & (SCHEDULE_DISCONNECT | DISCONNECT_SCHEDULED)) { |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| |
| /* ibmvscsis_disconnect might be waiting for us */ |
| if (list_empty(&vscsi->active_q) && |
| list_empty(&vscsi->schedule_q) && |
| (vscsi->flags & WAIT_FOR_IDLE)) { |
| vscsi->flags &= ~WAIT_FOR_IDLE; |
| complete(&vscsi->wait_idle); |
| } |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| return; |
| } |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| |
| switch (cmd->type) { |
| case SCSI_CDB: |
| ibmvscsis_parse_cmd(vscsi, cmd); |
| break; |
| case TASK_MANAGEMENT: |
| ibmvscsis_parse_task(vscsi, cmd); |
| break; |
| default: |
| dev_err(&vscsi->dev, "scheduler, invalid cmd type %d\n", |
| cmd->type); |
| spin_lock_bh(&vscsi->intr_lock); |
| ibmvscsis_free_cmd_resources(vscsi, cmd); |
| spin_unlock_bh(&vscsi->intr_lock); |
| break; |
| } |
| } |
| |
| static int ibmvscsis_alloc_cmds(struct scsi_info *vscsi, int num) |
| { |
| struct ibmvscsis_cmd *cmd; |
| int i; |
| |
| INIT_LIST_HEAD(&vscsi->free_cmd); |
| vscsi->cmd_pool = kcalloc(num, sizeof(struct ibmvscsis_cmd), |
| GFP_KERNEL); |
| if (!vscsi->cmd_pool) |
| return -ENOMEM; |
| |
| for (i = 0, cmd = (struct ibmvscsis_cmd *)vscsi->cmd_pool; i < num; |
| i++, cmd++) { |
| cmd->abort_cmd = NULL; |
| cmd->adapter = vscsi; |
| INIT_WORK(&cmd->work, ibmvscsis_scheduler); |
| list_add_tail(&cmd->list, &vscsi->free_cmd); |
| } |
| |
| return 0; |
| } |
| |
| static void ibmvscsis_free_cmds(struct scsi_info *vscsi) |
| { |
| kfree(vscsi->cmd_pool); |
| vscsi->cmd_pool = NULL; |
| INIT_LIST_HEAD(&vscsi->free_cmd); |
| } |
| |
| /** |
| * ibmvscsis_service_wait_q() - Service Waiting Queue |
| * @timer: Pointer to timer which has expired |
| * |
| * This routine is called when the timer pops to service the waiting |
| * queue. Elements on the queue have completed, their responses have been |
| * copied to the client, but the client's response queue was full so |
| * the queue message could not be sent. The routine grabs the proper locks |
| * and calls send messages. |
| * |
| * EXECUTION ENVIRONMENT: |
| * called at interrupt level |
| */ |
| static enum hrtimer_restart ibmvscsis_service_wait_q(struct hrtimer *timer) |
| { |
| struct timer_cb *p_timer = container_of(timer, struct timer_cb, timer); |
| struct scsi_info *vscsi = container_of(p_timer, struct scsi_info, |
| rsp_q_timer); |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| p_timer->timer_pops += 1; |
| p_timer->started = false; |
| ibmvscsis_send_messages(vscsi); |
| spin_unlock_bh(&vscsi->intr_lock); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| static long ibmvscsis_alloctimer(struct scsi_info *vscsi) |
| { |
| struct timer_cb *p_timer; |
| |
| p_timer = &vscsi->rsp_q_timer; |
| hrtimer_init(&p_timer->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| |
| p_timer->timer.function = ibmvscsis_service_wait_q; |
| p_timer->started = false; |
| p_timer->timer_pops = 0; |
| |
| return ADAPT_SUCCESS; |
| } |
| |
| static void ibmvscsis_freetimer(struct scsi_info *vscsi) |
| { |
| struct timer_cb *p_timer; |
| |
| p_timer = &vscsi->rsp_q_timer; |
| |
| (void)hrtimer_cancel(&p_timer->timer); |
| |
| p_timer->started = false; |
| p_timer->timer_pops = 0; |
| } |
| |
| static irqreturn_t ibmvscsis_interrupt(int dummy, void *data) |
| { |
| struct scsi_info *vscsi = data; |
| |
| vio_disable_interrupts(vscsi->dma_dev); |
| tasklet_schedule(&vscsi->work_task); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ibmvscsis_enable_change_state() - Set new state based on enabled status |
| * @vscsi: Pointer to our adapter structure |
| * |
| * This function determines our new state now that we are enabled. This |
| * may involve sending an Init Complete message to the client. |
| * |
| * Must be called with interrupt lock held. |
| */ |
| static long ibmvscsis_enable_change_state(struct scsi_info *vscsi) |
| { |
| int bytes; |
| long rc = ADAPT_SUCCESS; |
| |
| bytes = vscsi->cmd_q.size * PAGE_SIZE; |
| rc = h_reg_crq(vscsi->dds.unit_id, vscsi->cmd_q.crq_token, bytes); |
| if (rc == H_CLOSED || rc == H_SUCCESS) { |
| vscsi->state = WAIT_CONNECTION; |
| rc = ibmvscsis_establish_new_q(vscsi); |
| } |
| |
| if (rc != ADAPT_SUCCESS) { |
| vscsi->state = ERR_DISCONNECTED; |
| vscsi->flags |= RESPONSE_Q_DOWN; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_create_command_q() - Create Command Queue |
| * @vscsi: Pointer to our adapter structure |
| * @num_cmds: Currently unused. In the future, may be used to determine |
| * the size of the CRQ. |
| * |
| * Allocates memory for command queue maps remote memory into an ioba |
| * initializes the command response queue |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level only |
| */ |
| static long ibmvscsis_create_command_q(struct scsi_info *vscsi, int num_cmds) |
| { |
| int pages; |
| struct vio_dev *vdev = vscsi->dma_dev; |
| |
| /* We might support multiple pages in the future, but just 1 for now */ |
| pages = 1; |
| |
| vscsi->cmd_q.size = pages; |
| |
| vscsi->cmd_q.base_addr = |
| (struct viosrp_crq *)get_zeroed_page(GFP_KERNEL); |
| if (!vscsi->cmd_q.base_addr) |
| return -ENOMEM; |
| |
| vscsi->cmd_q.mask = ((uint)pages * CRQ_PER_PAGE) - 1; |
| |
| vscsi->cmd_q.crq_token = dma_map_single(&vdev->dev, |
| vscsi->cmd_q.base_addr, |
| PAGE_SIZE, DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(&vdev->dev, vscsi->cmd_q.crq_token)) { |
| free_page((unsigned long)vscsi->cmd_q.base_addr); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ibmvscsis_destroy_command_q - Destroy Command Queue |
| * @vscsi: Pointer to our adapter structure |
| * |
| * Releases memory for command queue and unmaps mapped remote memory. |
| * |
| * EXECUTION ENVIRONMENT: |
| * Process level only |
| */ |
| static void ibmvscsis_destroy_command_q(struct scsi_info *vscsi) |
| { |
| dma_unmap_single(&vscsi->dma_dev->dev, vscsi->cmd_q.crq_token, |
| PAGE_SIZE, DMA_BIDIRECTIONAL); |
| free_page((unsigned long)vscsi->cmd_q.base_addr); |
| vscsi->cmd_q.base_addr = NULL; |
| vscsi->state = NO_QUEUE; |
| } |
| |
| static u8 ibmvscsis_fast_fail(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct se_cmd *se_cmd = &cmd->se_cmd; |
| struct srp_cmd *srp = (struct srp_cmd *)iue->sbuf->buf; |
| struct scsi_sense_hdr sshdr; |
| u8 rc = se_cmd->scsi_status; |
| |
| if (vscsi->fast_fail && (READ_CMD(srp->cdb) || WRITE_CMD(srp->cdb))) |
| if (scsi_normalize_sense(se_cmd->sense_buffer, |
| se_cmd->scsi_sense_length, &sshdr)) |
| if (sshdr.sense_key == HARDWARE_ERROR && |
| (se_cmd->residual_count == 0 || |
| se_cmd->residual_count == se_cmd->data_length)) { |
| rc = NO_SENSE; |
| cmd->flags |= CMD_FAST_FAIL; |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * srp_build_response() - Build an SRP response buffer |
| * @vscsi: Pointer to our adapter structure |
| * @cmd: Pointer to command for which to send the response |
| * @len_p: Where to return the length of the IU response sent. This |
| * is needed to construct the CRQ response. |
| * |
| * Build the SRP response buffer and copy it to the client's memory space. |
| */ |
| static long srp_build_response(struct scsi_info *vscsi, |
| struct ibmvscsis_cmd *cmd, uint *len_p) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct se_cmd *se_cmd = &cmd->se_cmd; |
| struct srp_rsp *rsp; |
| uint len; |
| u32 rsp_code; |
| char *data; |
| u32 *tsk_status; |
| long rc = ADAPT_SUCCESS; |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| |
| rsp = &vio_iu(iue)->srp.rsp; |
| len = sizeof(*rsp); |
| memset(rsp, 0, len); |
| data = rsp->data; |
| |
| rsp->opcode = SRP_RSP; |
| |
| rsp->req_lim_delta = cpu_to_be32(1 + vscsi->credit); |
| rsp->tag = cmd->rsp.tag; |
| rsp->flags = 0; |
| |
| if (cmd->type == SCSI_CDB) { |
| rsp->status = ibmvscsis_fast_fail(vscsi, cmd); |
| if (rsp->status) { |
| dev_dbg(&vscsi->dev, "build_resp: cmd %p, scsi status %d\n", |
| cmd, (int)rsp->status); |
| ibmvscsis_determine_resid(se_cmd, rsp); |
| if (se_cmd->scsi_sense_length && se_cmd->sense_buffer) { |
| rsp->sense_data_len = |
| cpu_to_be32(se_cmd->scsi_sense_length); |
| rsp->flags |= SRP_RSP_FLAG_SNSVALID; |
| len += se_cmd->scsi_sense_length; |
| memcpy(data, se_cmd->sense_buffer, |
| se_cmd->scsi_sense_length); |
| } |
| rsp->sol_not = (cmd->rsp.sol_not & UCSOLNT) >> |
| UCSOLNT_RESP_SHIFT; |
| } else if (cmd->flags & CMD_FAST_FAIL) { |
| dev_dbg(&vscsi->dev, "build_resp: cmd %p, fast fail\n", |
| cmd); |
| rsp->sol_not = (cmd->rsp.sol_not & UCSOLNT) >> |
| UCSOLNT_RESP_SHIFT; |
| } else { |
| rsp->sol_not = (cmd->rsp.sol_not & SCSOLNT) >> |
| SCSOLNT_RESP_SHIFT; |
| } |
| } else { |
| /* this is task management */ |
| rsp->status = 0; |
| rsp->resp_data_len = cpu_to_be32(4); |
| rsp->flags |= SRP_RSP_FLAG_RSPVALID; |
| |
| switch (se_cmd->se_tmr_req->response) { |
| case TMR_FUNCTION_COMPLETE: |
| case TMR_TASK_DOES_NOT_EXIST: |
| rsp_code = SRP_TASK_MANAGEMENT_FUNCTION_COMPLETE; |
| rsp->sol_not = (cmd->rsp.sol_not & SCSOLNT) >> |
| SCSOLNT_RESP_SHIFT; |
| break; |
| case TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED: |
| case TMR_LUN_DOES_NOT_EXIST: |
| rsp_code = SRP_TASK_MANAGEMENT_FUNCTION_NOT_SUPPORTED; |
| rsp->sol_not = (cmd->rsp.sol_not & UCSOLNT) >> |
| UCSOLNT_RESP_SHIFT; |
| break; |
| case TMR_FUNCTION_FAILED: |
| case TMR_FUNCTION_REJECTED: |
| default: |
| rsp_code = SRP_TASK_MANAGEMENT_FUNCTION_FAILED; |
| rsp->sol_not = (cmd->rsp.sol_not & UCSOLNT) >> |
| UCSOLNT_RESP_SHIFT; |
| break; |
| } |
| |
| tsk_status = (u32 *)data; |
| *tsk_status = cpu_to_be32(rsp_code); |
| data = (char *)(tsk_status + 1); |
| len += 4; |
| } |
| |
| dma_wmb(); |
| rc = h_copy_rdma(len, vscsi->dds.window[LOCAL].liobn, iue->sbuf->dma, |
| vscsi->dds.window[REMOTE].liobn, |
| be64_to_cpu(iue->remote_token)); |
| |
| switch (rc) { |
| case H_SUCCESS: |
| vscsi->credit = 0; |
| *len_p = len; |
| break; |
| case H_PERMISSION: |
| if (connection_broken(vscsi)) |
| vscsi->flags |= RESPONSE_Q_DOWN | CLIENT_FAILED; |
| |
| dev_err(&vscsi->dev, "build_response: error copying to client, rc %ld, flags 0x%x, state 0x%hx\n", |
| rc, vscsi->flags, vscsi->state); |
| break; |
| case H_SOURCE_PARM: |
| case H_DEST_PARM: |
| default: |
| dev_err(&vscsi->dev, "build_response: error copying to client, rc %ld\n", |
| rc); |
| break; |
| } |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| |
| return rc; |
| } |
| |
| static int ibmvscsis_rdma(struct ibmvscsis_cmd *cmd, struct scatterlist *sg, |
| int nsg, struct srp_direct_buf *md, int nmd, |
| enum dma_data_direction dir, unsigned int bytes) |
| { |
| struct iu_entry *iue = cmd->iue; |
| struct srp_target *target = iue->target; |
| struct scsi_info *vscsi = target->ldata; |
| struct scatterlist *sgp; |
| dma_addr_t client_ioba, server_ioba; |
| ulong buf_len; |
| ulong client_len, server_len; |
| int md_idx; |
| long tx_len; |
| long rc = 0; |
| |
| if (bytes == 0) |
| return 0; |
| |
| sgp = sg; |
| client_len = 0; |
| server_len = 0; |
| md_idx = 0; |
| tx_len = bytes; |
| |
| do { |
| if (client_len == 0) { |
| if (md_idx >= nmd) { |
| dev_err(&vscsi->dev, "rdma: ran out of client memory descriptors\n"); |
| rc = -EIO; |
| break; |
| } |
| client_ioba = be64_to_cpu(md[md_idx].va); |
| client_len = be32_to_cpu(md[md_idx].len); |
| } |
| if (server_len == 0) { |
| if (!sgp) { |
| dev_err(&vscsi->dev, "rdma: ran out of scatter/gather list\n"); |
| rc = -EIO; |
| break; |
| } |
| server_ioba = sg_dma_address(sgp); |
| server_len = sg_dma_len(sgp); |
| } |
| |
| buf_len = tx_len; |
| |
| if (buf_len > client_len) |
| buf_len = client_len; |
| |
| if (buf_len > server_len) |
| buf_len = server_len; |
| |
| if (buf_len > max_vdma_size) |
| buf_len = max_vdma_size; |
| |
| if (dir == DMA_TO_DEVICE) { |
| /* read from client */ |
| rc = h_copy_rdma(buf_len, |
| vscsi->dds.window[REMOTE].liobn, |
| client_ioba, |
| vscsi->dds.window[LOCAL].liobn, |
| server_ioba); |
| } else { |
| /* The h_copy_rdma will cause phyp, running in another |
| * partition, to read memory, so we need to make sure |
| * the data has been written out, hence these syncs. |
| */ |
| /* ensure that everything is in memory */ |
| isync(); |
| /* ensure that memory has been made visible */ |
| dma_wmb(); |
| rc = h_copy_rdma(buf_len, |
| vscsi->dds.window[LOCAL].liobn, |
| server_ioba, |
| vscsi->dds.window[REMOTE].liobn, |
| client_ioba); |
| } |
| switch (rc) { |
| case H_SUCCESS: |
| break; |
| case H_PERMISSION: |
| case H_SOURCE_PARM: |
| case H_DEST_PARM: |
| if (connection_broken(vscsi)) { |
| spin_lock_bh(&vscsi->intr_lock); |
| vscsi->flags |= |
| (RESPONSE_Q_DOWN | CLIENT_FAILED); |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| dev_err(&vscsi->dev, "rdma: h_copy_rdma failed, rc %ld\n", |
| rc); |
| break; |
| |
| default: |
| dev_err(&vscsi->dev, "rdma: unknown error %ld from h_copy_rdma\n", |
| rc); |
| break; |
| } |
| |
| if (!rc) { |
| tx_len -= buf_len; |
| if (tx_len) { |
| client_len -= buf_len; |
| if (client_len == 0) |
| md_idx++; |
| else |
| client_ioba += buf_len; |
| |
| server_len -= buf_len; |
| if (server_len == 0) |
| sgp = sg_next(sgp); |
| else |
| server_ioba += buf_len; |
| } else { |
| break; |
| } |
| } |
| } while (!rc); |
| |
| return rc; |
| } |
| |
| /** |
| * ibmvscsis_handle_crq() - Handle CRQ |
| * @data: Pointer to our adapter structure |
| * |
| * Read the command elements from the command queue and copy the payloads |
| * associated with the command elements to local memory and execute the |
| * SRP requests. |
| * |
| * Note: this is an edge triggered interrupt. It can not be shared. |
| */ |
| static void ibmvscsis_handle_crq(unsigned long data) |
| { |
| struct scsi_info *vscsi = (struct scsi_info *)data; |
| struct viosrp_crq *crq; |
| long rc; |
| bool ack = true; |
| volatile u8 valid; |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| |
| dev_dbg(&vscsi->dev, "got interrupt\n"); |
| |
| /* |
| * if we are in a path where we are waiting for all pending commands |
| * to complete because we received a transport event and anything in |
| * the command queue is for a new connection, do nothing |
| */ |
| if (TARGET_STOP(vscsi)) { |
| vio_enable_interrupts(vscsi->dma_dev); |
| |
| dev_dbg(&vscsi->dev, "handle_crq, don't process: flags 0x%x, state 0x%hx\n", |
| vscsi->flags, vscsi->state); |
| spin_unlock_bh(&vscsi->intr_lock); |
| return; |
| } |
| |
| rc = vscsi->flags & SCHEDULE_DISCONNECT; |
| crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index; |
| valid = crq->valid; |
| dma_rmb(); |
| |
| while (valid) { |
| /* |
| * These are edege triggered interrupts. After dropping out of |
| * the while loop, the code must check for work since an |
| * interrupt could be lost, and an elment be left on the queue, |
| * hence the label. |
| */ |
| cmd_work: |
| vscsi->cmd_q.index = |
| (vscsi->cmd_q.index + 1) & vscsi->cmd_q.mask; |
| |
| if (!rc) { |
| rc = ibmvscsis_parse_command(vscsi, crq); |
| } else { |
| if ((uint)crq->valid == VALID_TRANS_EVENT) { |
| /* |
| * must service the transport layer events even |
| * in an error state, dont break out until all |
| * the consecutive transport events have been |
| * processed |
| */ |
| rc = ibmvscsis_trans_event(vscsi, crq); |
| } else if (vscsi->flags & TRANS_EVENT) { |
| /* |
| * if a transport event has occurred leave |
| * everything but transport events on the queue |
| * |
| * need to decrement the queue index so we can |
| * look at the element again |
| */ |
| if (vscsi->cmd_q.index) |
| vscsi->cmd_q.index -= 1; |
| else |
| /* |
| * index is at 0 it just wrapped. |
| * have it index last element in q |
| */ |
| vscsi->cmd_q.index = vscsi->cmd_q.mask; |
| break; |
| } |
| } |
| |
| crq->valid = INVALIDATE_CMD_RESP_EL; |
| |
| crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index; |
| valid = crq->valid; |
| dma_rmb(); |
| } |
| |
| if (!rc) { |
| if (ack) { |
| vio_enable_interrupts(vscsi->dma_dev); |
| ack = false; |
| dev_dbg(&vscsi->dev, "handle_crq, reenabling interrupts\n"); |
| } |
| valid = crq->valid; |
| dma_rmb(); |
| if (valid) |
| goto cmd_work; |
| } else { |
| dev_dbg(&vscsi->dev, "handle_crq, error: flags 0x%x, state 0x%hx, crq index 0x%x\n", |
| vscsi->flags, vscsi->state, vscsi->cmd_q.index); |
| } |
| |
| dev_dbg(&vscsi->dev, "Leaving handle_crq: schedule_q empty %d, flags 0x%x, state 0x%hx\n", |
| (int)list_empty(&vscsi->schedule_q), vscsi->flags, |
| vscsi->state); |
| |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| static int ibmvscsis_probe(struct vio_dev *vdev, |
| const struct vio_device_id *id) |
| { |
| struct scsi_info *vscsi; |
| int rc = 0; |
| long hrc = 0; |
| char wq_name[24]; |
| |
| vscsi = kzalloc(sizeof(*vscsi), GFP_KERNEL); |
| if (!vscsi) { |
| rc = -ENOMEM; |
| dev_err(&vdev->dev, "probe: allocation of adapter failed\n"); |
| return rc; |
| } |
| |
| vscsi->dma_dev = vdev; |
| vscsi->dev = vdev->dev; |
| INIT_LIST_HEAD(&vscsi->schedule_q); |
| INIT_LIST_HEAD(&vscsi->waiting_rsp); |
| INIT_LIST_HEAD(&vscsi->active_q); |
| |
| snprintf(vscsi->tport.tport_name, IBMVSCSIS_NAMELEN, "%s", |
| dev_name(&vdev->dev)); |
| |
| dev_dbg(&vscsi->dev, "probe tport_name: %s\n", vscsi->tport.tport_name); |
| |
| rc = read_dma_window(vscsi); |
| if (rc) |
| goto free_adapter; |
| dev_dbg(&vscsi->dev, "Probe: liobn 0x%x, riobn 0x%x\n", |
| vscsi->dds.window[LOCAL].liobn, |
| vscsi->dds.window[REMOTE].liobn); |
| |
| snprintf(vscsi->eye, sizeof(vscsi->eye), "VSCSI %s", vdev->name); |
| |
| vscsi->dds.unit_id = vdev->unit_address; |
| strscpy(vscsi->dds.partition_name, partition_name, |
| sizeof(vscsi->dds.partition_name)); |
| vscsi->dds.partition_num = partition_number; |
| |
| spin_lock_bh(&ibmvscsis_dev_lock); |
| list_add_tail(&vscsi->list, &ibmvscsis_dev_list); |
| spin_unlock_bh(&ibmvscsis_dev_lock); |
| |
| /* |
| * TBD: How do we determine # of cmds to request? Do we know how |
| * many "children" we have? |
| */ |
| vscsi->request_limit = INITIAL_SRP_LIMIT; |
| rc = srp_target_alloc(&vscsi->target, &vdev->dev, vscsi->request_limit, |
| SRP_MAX_IU_LEN); |
| if (rc) |
| goto rem_list; |
| |
| vscsi->target.ldata = vscsi; |
| |
| rc = ibmvscsis_alloc_cmds(vscsi, vscsi->request_limit); |
| if (rc) { |
| dev_err(&vscsi->dev, "alloc_cmds failed, rc %d, num %d\n", |
| rc, vscsi->request_limit); |
| goto free_target; |
| } |
| |
| /* |
| * Note: the lock is used in freeing timers, so must initialize |
| * first so that ordering in case of error is correct. |
| */ |
| spin_lock_init(&vscsi->intr_lock); |
| |
| rc = ibmvscsis_alloctimer(vscsi); |
| if (rc) { |
| dev_err(&vscsi->dev, "probe: alloctimer failed, rc %d\n", rc); |
| goto free_cmds; |
| } |
| |
| rc = ibmvscsis_create_command_q(vscsi, 256); |
| if (rc) { |
| dev_err(&vscsi->dev, "probe: create_command_q failed, rc %d\n", |
| rc); |
| goto free_timer; |
| } |
| |
| vscsi->map_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!vscsi->map_buf) { |
| rc = -ENOMEM; |
| dev_err(&vscsi->dev, "probe: allocating cmd buffer failed\n"); |
| goto destroy_queue; |
| } |
| |
| vscsi->map_ioba = dma_map_single(&vdev->dev, vscsi->map_buf, PAGE_SIZE, |
| DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(&vdev->dev, vscsi->map_ioba)) { |
| rc = -ENOMEM; |
| dev_err(&vscsi->dev, "probe: error mapping command buffer\n"); |
| goto free_buf; |
| } |
| |
| hrc = h_vioctl(vscsi->dds.unit_id, H_GET_PARTNER_INFO, |
| (u64)vscsi->map_ioba | ((u64)PAGE_SIZE << 32), 0, 0, 0, |
| 0); |
| if (hrc == H_SUCCESS) |
| vscsi->client_data.partition_number = |
| be64_to_cpu(*(u64 *)vscsi->map_buf); |
| /* |
| * We expect the VIOCTL to fail if we're configured as "any |
| * client can connect" and the client isn't activated yet. |
| * We'll make the call again when he sends an init msg. |
| */ |
| dev_dbg(&vscsi->dev, "probe hrc %ld, client partition num %d\n", |
| hrc, vscsi->client_data.partition_number); |
| |
| tasklet_init(&vscsi->work_task, ibmvscsis_handle_crq, |
| (unsigned long)vscsi); |
| |
| init_completion(&vscsi->wait_idle); |
| init_completion(&vscsi->unconfig); |
| |
| snprintf(wq_name, 24, "ibmvscsis%s", dev_name(&vdev->dev)); |
| vscsi->work_q = create_workqueue(wq_name); |
| if (!vscsi->work_q) { |
| rc = -ENOMEM; |
| dev_err(&vscsi->dev, "create_workqueue failed\n"); |
| goto unmap_buf; |
| } |
| |
| rc = request_irq(vdev->irq, ibmvscsis_interrupt, 0, "ibmvscsis", vscsi); |
| if (rc) { |
| rc = -EPERM; |
| dev_err(&vscsi->dev, "probe: request_irq failed, rc %d\n", rc); |
| goto destroy_WQ; |
| } |
| |
| vscsi->state = WAIT_ENABLED; |
| |
| dev_set_drvdata(&vdev->dev, vscsi); |
| |
| return 0; |
| |
| destroy_WQ: |
| destroy_workqueue(vscsi->work_q); |
| unmap_buf: |
| dma_unmap_single(&vdev->dev, vscsi->map_ioba, PAGE_SIZE, |
| DMA_BIDIRECTIONAL); |
| free_buf: |
| kfree(vscsi->map_buf); |
| destroy_queue: |
| tasklet_kill(&vscsi->work_task); |
| ibmvscsis_unregister_command_q(vscsi); |
| ibmvscsis_destroy_command_q(vscsi); |
| free_timer: |
| ibmvscsis_freetimer(vscsi); |
| free_cmds: |
| ibmvscsis_free_cmds(vscsi); |
| free_target: |
| srp_target_free(&vscsi->target); |
| rem_list: |
| spin_lock_bh(&ibmvscsis_dev_lock); |
| list_del(&vscsi->list); |
| spin_unlock_bh(&ibmvscsis_dev_lock); |
| free_adapter: |
| kfree(vscsi); |
| |
| return rc; |
| } |
| |
| static void ibmvscsis_remove(struct vio_dev *vdev) |
| { |
| struct scsi_info *vscsi = dev_get_drvdata(&vdev->dev); |
| |
| dev_dbg(&vscsi->dev, "remove (%s)\n", dev_name(&vscsi->dma_dev->dev)); |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| ibmvscsis_post_disconnect(vscsi, UNCONFIGURING, 0); |
| vscsi->flags |= CFG_SLEEPING; |
| spin_unlock_bh(&vscsi->intr_lock); |
| wait_for_completion(&vscsi->unconfig); |
| |
| vio_disable_interrupts(vdev); |
| free_irq(vdev->irq, vscsi); |
| destroy_workqueue(vscsi->work_q); |
| dma_unmap_single(&vdev->dev, vscsi->map_ioba, PAGE_SIZE, |
| DMA_BIDIRECTIONAL); |
| kfree(vscsi->map_buf); |
| tasklet_kill(&vscsi->work_task); |
| ibmvscsis_destroy_command_q(vscsi); |
| ibmvscsis_freetimer(vscsi); |
| ibmvscsis_free_cmds(vscsi); |
| srp_target_free(&vscsi->target); |
| spin_lock_bh(&ibmvscsis_dev_lock); |
| list_del(&vscsi->list); |
| spin_unlock_bh(&ibmvscsis_dev_lock); |
| kfree(vscsi); |
| } |
| |
| static ssize_t system_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%s\n", system_id); |
| } |
| |
| static ssize_t partition_number_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%x\n", partition_number); |
| } |
| |
| static ssize_t unit_address_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_info *vscsi = container_of(dev, struct scsi_info, dev); |
| |
| return snprintf(buf, PAGE_SIZE, "%x\n", vscsi->dma_dev->unit_address); |
| } |
| |
| static int ibmvscsis_get_system_info(void) |
| { |
| struct device_node *rootdn, *vdevdn; |
| const char *id, *model, *name; |
| const uint *num; |
| |
| rootdn = of_find_node_by_path("/"); |
| if (!rootdn) |
| return -ENOENT; |
| |
| model = of_get_property(rootdn, "model", NULL); |
| id = of_get_property(rootdn, "system-id", NULL); |
| if (model && id) |
| snprintf(system_id, sizeof(system_id), "%s-%s", model, id); |
| |
| name = of_get_property(rootdn, "ibm,partition-name", NULL); |
| if (name) |
| strncpy(partition_name, name, sizeof(partition_name)); |
| |
| num = of_get_property(rootdn, "ibm,partition-no", NULL); |
| if (num) |
| partition_number = of_read_number(num, 1); |
| |
| of_node_put(rootdn); |
| |
| vdevdn = of_find_node_by_path("/vdevice"); |
| if (vdevdn) { |
| const uint *mvds; |
| |
| mvds = of_get_property(vdevdn, "ibm,max-virtual-dma-size", |
| NULL); |
| if (mvds) |
| max_vdma_size = *mvds; |
| of_node_put(vdevdn); |
| } |
| |
| return 0; |
| } |
| |
| static char *ibmvscsis_get_fabric_wwn(struct se_portal_group *se_tpg) |
| { |
| struct ibmvscsis_tport *tport = |
| container_of(se_tpg, struct ibmvscsis_tport, se_tpg); |
| |
| return tport->tport_name; |
| } |
| |
| static u16 ibmvscsis_get_tag(struct se_portal_group *se_tpg) |
| { |
| struct ibmvscsis_tport *tport = |
| container_of(se_tpg, struct ibmvscsis_tport, se_tpg); |
| |
| return tport->tport_tpgt; |
| } |
| |
| static u32 ibmvscsis_get_default_depth(struct se_portal_group *se_tpg) |
| { |
| return 1; |
| } |
| |
| static int ibmvscsis_check_true(struct se_portal_group *se_tpg) |
| { |
| return 1; |
| } |
| |
| static int ibmvscsis_check_stop_free(struct se_cmd *se_cmd) |
| { |
| return target_put_sess_cmd(se_cmd); |
| } |
| |
| static void ibmvscsis_release_cmd(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct scsi_info *vscsi = cmd->adapter; |
| |
| spin_lock_bh(&vscsi->intr_lock); |
| /* Remove from active_q */ |
| list_move_tail(&cmd->list, &vscsi->waiting_rsp); |
| ibmvscsis_send_messages(vscsi); |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| static int ibmvscsis_write_pending(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct scsi_info *vscsi = cmd->adapter; |
| struct iu_entry *iue = cmd->iue; |
| int rc; |
| |
| /* |
| * If CLIENT_FAILED OR RESPONSE_Q_DOWN, then just return success |
| * since LIO can't do anything about it, and we dont want to |
| * attempt an srp_transfer_data. |
| */ |
| if ((vscsi->flags & (CLIENT_FAILED | RESPONSE_Q_DOWN))) { |
| dev_err(&vscsi->dev, "write_pending failed since: %d\n", |
| vscsi->flags); |
| return -EIO; |
| |
| } |
| |
| rc = srp_transfer_data(cmd, &vio_iu(iue)->srp.cmd, ibmvscsis_rdma, |
| 1, 1); |
| if (rc) { |
| dev_err(&vscsi->dev, "srp_transfer_data() failed: %d\n", rc); |
| return -EIO; |
| } |
| /* |
| * We now tell TCM to add this WRITE CDB directly into the TCM storage |
| * object execution queue. |
| */ |
| target_execute_cmd(se_cmd); |
| return 0; |
| } |
| |
| static int ibmvscsis_queue_data_in(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct iu_entry *iue = cmd->iue; |
| struct scsi_info *vscsi = cmd->adapter; |
| uint len = 0; |
| int rc; |
| |
| rc = srp_transfer_data(cmd, &vio_iu(iue)->srp.cmd, ibmvscsis_rdma, 1, |
| 1); |
| if (rc) { |
| dev_err(&vscsi->dev, "srp_transfer_data failed: %d\n", rc); |
| se_cmd->scsi_sense_length = 18; |
| memset(se_cmd->sense_buffer, 0, se_cmd->scsi_sense_length); |
| /* Logical Unit Communication Time-out asc/ascq = 0x0801 */ |
| scsi_build_sense_buffer(0, se_cmd->sense_buffer, MEDIUM_ERROR, |
| 0x08, 0x01); |
| } |
| |
| srp_build_response(vscsi, cmd, &len); |
| cmd->rsp.format = SRP_FORMAT; |
| cmd->rsp.len = len; |
| |
| return 0; |
| } |
| |
| static int ibmvscsis_queue_status(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct scsi_info *vscsi = cmd->adapter; |
| uint len; |
| |
| dev_dbg(&vscsi->dev, "queue_status %p\n", se_cmd); |
| |
| srp_build_response(vscsi, cmd, &len); |
| cmd->rsp.format = SRP_FORMAT; |
| cmd->rsp.len = len; |
| |
| return 0; |
| } |
| |
| static void ibmvscsis_queue_tm_rsp(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct scsi_info *vscsi = cmd->adapter; |
| struct ibmvscsis_cmd *cmd_itr; |
| struct iu_entry *iue = iue = cmd->iue; |
| struct srp_tsk_mgmt *srp_tsk = &vio_iu(iue)->srp.tsk_mgmt; |
| u64 tag_to_abort = be64_to_cpu(srp_tsk->task_tag); |
| uint len; |
| |
| dev_dbg(&vscsi->dev, "queue_tm_rsp %p, status %d\n", |
| se_cmd, (int)se_cmd->se_tmr_req->response); |
| |
| if (srp_tsk->tsk_mgmt_func == SRP_TSK_ABORT_TASK && |
| cmd->se_cmd.se_tmr_req->response == TMR_TASK_DOES_NOT_EXIST) { |
| spin_lock_bh(&vscsi->intr_lock); |
| list_for_each_entry(cmd_itr, &vscsi->active_q, list) { |
| if (tag_to_abort == cmd_itr->se_cmd.tag) { |
| cmd_itr->abort_cmd = cmd; |
| cmd->flags |= DELAY_SEND; |
| break; |
| } |
| } |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| srp_build_response(vscsi, cmd, &len); |
| cmd->rsp.format = SRP_FORMAT; |
| cmd->rsp.len = len; |
| } |
| |
| static void ibmvscsis_aborted_task(struct se_cmd *se_cmd) |
| { |
| struct ibmvscsis_cmd *cmd = container_of(se_cmd, struct ibmvscsis_cmd, |
| se_cmd); |
| struct scsi_info *vscsi = cmd->adapter; |
| |
| dev_dbg(&vscsi->dev, "ibmvscsis_aborted_task %p task_tag: %llu\n", |
| se_cmd, se_cmd->tag); |
| } |
| |
| static struct se_wwn *ibmvscsis_make_tport(struct target_fabric_configfs *tf, |
| struct config_group *group, |
| const char *name) |
| { |
| struct ibmvscsis_tport *tport; |
| struct scsi_info *vscsi; |
| |
| tport = ibmvscsis_lookup_port(name); |
| if (tport) { |
| vscsi = container_of(tport, struct scsi_info, tport); |
| tport->tport_proto_id = SCSI_PROTOCOL_SRP; |
| dev_dbg(&vscsi->dev, "make_tport(%s), pointer:%p, tport_id:%x\n", |
| name, tport, tport->tport_proto_id); |
| return &tport->tport_wwn; |
| } |
| |
| return ERR_PTR(-EINVAL); |
| } |
| |
| static void ibmvscsis_drop_tport(struct se_wwn *wwn) |
| { |
| struct ibmvscsis_tport *tport = container_of(wwn, |
| struct ibmvscsis_tport, |
| tport_wwn); |
| struct scsi_info *vscsi = container_of(tport, struct scsi_info, tport); |
| |
| dev_dbg(&vscsi->dev, "drop_tport(%s)\n", |
| config_item_name(&tport->tport_wwn.wwn_group.cg_item)); |
| } |
| |
| static struct se_portal_group *ibmvscsis_make_tpg(struct se_wwn *wwn, |
| const char *name) |
| { |
| struct ibmvscsis_tport *tport = |
| container_of(wwn, struct ibmvscsis_tport, tport_wwn); |
| u16 tpgt; |
| int rc; |
| |
| if (strstr(name, "tpgt_") != name) |
| return ERR_PTR(-EINVAL); |
| rc = kstrtou16(name + 5, 0, &tpgt); |
| if (rc) |
| return ERR_PTR(rc); |
| tport->tport_tpgt = tpgt; |
| |
| tport->releasing = false; |
| |
| rc = core_tpg_register(&tport->tport_wwn, &tport->se_tpg, |
| tport->tport_proto_id); |
| if (rc) |
| return ERR_PTR(rc); |
| |
| return &tport->se_tpg; |
| } |
| |
| static void ibmvscsis_drop_tpg(struct se_portal_group *se_tpg) |
| { |
| struct ibmvscsis_tport *tport = container_of(se_tpg, |
| struct ibmvscsis_tport, |
| se_tpg); |
| |
| tport->releasing = true; |
| tport->enabled = false; |
| |
| /* |
| * Release the virtual I_T Nexus for this ibmvscsis TPG |
| */ |
| ibmvscsis_drop_nexus(tport); |
| /* |
| * Deregister the se_tpg from TCM.. |
| */ |
| core_tpg_deregister(se_tpg); |
| } |
| |
| static ssize_t ibmvscsis_wwn_version_show(struct config_item *item, |
| char *page) |
| { |
| return scnprintf(page, PAGE_SIZE, "%s\n", IBMVSCSIS_VERSION); |
| } |
| CONFIGFS_ATTR_RO(ibmvscsis_wwn_, version); |
| |
| static struct configfs_attribute *ibmvscsis_wwn_attrs[] = { |
| &ibmvscsis_wwn_attr_version, |
| NULL, |
| }; |
| |
| |
| static int ibmvscsis_enable_tpg(struct se_portal_group *se_tpg, bool enable) |
| { |
| struct ibmvscsis_tport *tport = container_of(se_tpg, |
| struct ibmvscsis_tport, |
| se_tpg); |
| struct scsi_info *vscsi = container_of(tport, struct scsi_info, tport); |
| long lrc; |
| |
| if (enable) { |
| spin_lock_bh(&vscsi->intr_lock); |
| tport->enabled = true; |
| lrc = ibmvscsis_enable_change_state(vscsi); |
| if (lrc) |
| dev_err(&vscsi->dev, "enable_change_state failed, rc %ld state %d\n", |
| lrc, vscsi->state); |
| spin_unlock_bh(&vscsi->intr_lock); |
| } else { |
| spin_lock_bh(&vscsi->intr_lock); |
| tport->enabled = false; |
| /* This simulates the server going down */ |
| ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT, 0); |
| spin_unlock_bh(&vscsi->intr_lock); |
| } |
| |
| return 0; |
| } |
| |
| static const struct target_core_fabric_ops ibmvscsis_ops = { |
| .module = THIS_MODULE, |
| .fabric_name = "ibmvscsis", |
| .max_data_sg_nents = MAX_TXU / PAGE_SIZE, |
| .tpg_get_wwn = ibmvscsis_get_fabric_wwn, |
| .tpg_get_tag = ibmvscsis_get_tag, |
| .tpg_get_default_depth = ibmvscsis_get_default_depth, |
| .tpg_check_demo_mode = ibmvscsis_check_true, |
| .tpg_check_demo_mode_cache = ibmvscsis_check_true, |
| .check_stop_free = ibmvscsis_check_stop_free, |
| .release_cmd = ibmvscsis_release_cmd, |
| .write_pending = ibmvscsis_write_pending, |
| .queue_data_in = ibmvscsis_queue_data_in, |
| .queue_status = ibmvscsis_queue_status, |
| .queue_tm_rsp = ibmvscsis_queue_tm_rsp, |
| .aborted_task = ibmvscsis_aborted_task, |
| /* |
| * Setup function pointers for logic in target_core_fabric_configfs.c |
| */ |
| .fabric_make_wwn = ibmvscsis_make_tport, |
| .fabric_drop_wwn = ibmvscsis_drop_tport, |
| .fabric_make_tpg = ibmvscsis_make_tpg, |
| .fabric_enable_tpg = ibmvscsis_enable_tpg, |
| .fabric_drop_tpg = ibmvscsis_drop_tpg, |
| |
| .tfc_wwn_attrs = ibmvscsis_wwn_attrs, |
| |
| .default_submit_type = TARGET_DIRECT_SUBMIT, |
| .direct_submit_supp = 1, |
| }; |
| |
| static void ibmvscsis_dev_release(struct device *dev) {}; |
| |
| static struct device_attribute dev_attr_system_id = |
| __ATTR(system_id, S_IRUGO, system_id_show, NULL); |
| |
| static struct device_attribute dev_attr_partition_number = |
| __ATTR(partition_number, S_IRUGO, partition_number_show, NULL); |
| |
| static struct device_attribute dev_attr_unit_address = |
| __ATTR(unit_address, S_IRUGO, unit_address_show, NULL); |
| |
| static struct attribute *ibmvscsis_dev_attrs[] = { |
| &dev_attr_system_id.attr, |
| &dev_attr_partition_number.attr, |
| &dev_attr_unit_address.attr, |
| }; |
| ATTRIBUTE_GROUPS(ibmvscsis_dev); |
| |
| static struct class ibmvscsis_class = { |
| .name = "ibmvscsis", |
| .dev_release = ibmvscsis_dev_release, |
| .dev_groups = ibmvscsis_dev_groups, |
| }; |
| |
| static const struct vio_device_id ibmvscsis_device_table[] = { |
| { "v-scsi-host", "IBM,v-scsi-host" }, |
| { "", "" } |
| }; |
| MODULE_DEVICE_TABLE(vio, ibmvscsis_device_table); |
| |
| static struct vio_driver ibmvscsis_driver = { |
| .name = "ibmvscsis", |
| .id_table = ibmvscsis_device_table, |
| .probe = ibmvscsis_probe, |
| .remove = ibmvscsis_remove, |
| }; |
| |
| /* |
| * ibmvscsis_init() - Kernel Module initialization |
| * |
| * Note: vio_register_driver() registers callback functions, and at least one |
| * of those callback functions calls TCM - Linux IO Target Subsystem, thus |
| * the SCSI Target template must be registered before vio_register_driver() |
| * is called. |
| */ |
| static int __init ibmvscsis_init(void) |
| { |
| int rc = 0; |
| |
| rc = ibmvscsis_get_system_info(); |
| if (rc) { |
| pr_err("rc %d from get_system_info\n", rc); |
| goto out; |
| } |
| |
| rc = class_register(&ibmvscsis_class); |
| if (rc) { |
| pr_err("failed class register\n"); |
| goto out; |
| } |
| |
| rc = target_register_template(&ibmvscsis_ops); |
| if (rc) { |
| pr_err("rc %d from target_register_template\n", rc); |
| goto unregister_class; |
| } |
| |
| rc = vio_register_driver(&ibmvscsis_driver); |
| if (rc) { |
| pr_err("rc %d from vio_register_driver\n", rc); |
| goto unregister_target; |
| } |
| |
| return 0; |
| |
| unregister_target: |
| target_unregister_template(&ibmvscsis_ops); |
| unregister_class: |
| class_unregister(&ibmvscsis_class); |
| out: |
| return rc; |
| } |
| |
| static void __exit ibmvscsis_exit(void) |
| { |
| pr_info("Unregister IBM virtual SCSI host driver\n"); |
| vio_unregister_driver(&ibmvscsis_driver); |
| target_unregister_template(&ibmvscsis_ops); |
| class_unregister(&ibmvscsis_class); |
| } |
| |
| MODULE_DESCRIPTION("IBMVSCSIS fabric driver"); |
| MODULE_AUTHOR("Bryant G. Ly and Michael Cyr"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(IBMVSCSIS_VERSION); |
| module_init(ibmvscsis_init); |
| module_exit(ibmvscsis_exit); |