| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2019, Intel Corporation. */ |
| |
| #include "ice_common.h" |
| #include "ice_flex_pipe.h" |
| #include "ice_flow.h" |
| #include "ice.h" |
| |
| static const u32 ice_sect_lkup[ICE_BLK_COUNT][ICE_SECT_COUNT] = { |
| /* SWITCH */ |
| { |
| ICE_SID_XLT0_SW, |
| ICE_SID_XLT_KEY_BUILDER_SW, |
| ICE_SID_XLT1_SW, |
| ICE_SID_XLT2_SW, |
| ICE_SID_PROFID_TCAM_SW, |
| ICE_SID_PROFID_REDIR_SW, |
| ICE_SID_FLD_VEC_SW, |
| ICE_SID_CDID_KEY_BUILDER_SW, |
| ICE_SID_CDID_REDIR_SW |
| }, |
| |
| /* ACL */ |
| { |
| ICE_SID_XLT0_ACL, |
| ICE_SID_XLT_KEY_BUILDER_ACL, |
| ICE_SID_XLT1_ACL, |
| ICE_SID_XLT2_ACL, |
| ICE_SID_PROFID_TCAM_ACL, |
| ICE_SID_PROFID_REDIR_ACL, |
| ICE_SID_FLD_VEC_ACL, |
| ICE_SID_CDID_KEY_BUILDER_ACL, |
| ICE_SID_CDID_REDIR_ACL |
| }, |
| |
| /* FD */ |
| { |
| ICE_SID_XLT0_FD, |
| ICE_SID_XLT_KEY_BUILDER_FD, |
| ICE_SID_XLT1_FD, |
| ICE_SID_XLT2_FD, |
| ICE_SID_PROFID_TCAM_FD, |
| ICE_SID_PROFID_REDIR_FD, |
| ICE_SID_FLD_VEC_FD, |
| ICE_SID_CDID_KEY_BUILDER_FD, |
| ICE_SID_CDID_REDIR_FD |
| }, |
| |
| /* RSS */ |
| { |
| ICE_SID_XLT0_RSS, |
| ICE_SID_XLT_KEY_BUILDER_RSS, |
| ICE_SID_XLT1_RSS, |
| ICE_SID_XLT2_RSS, |
| ICE_SID_PROFID_TCAM_RSS, |
| ICE_SID_PROFID_REDIR_RSS, |
| ICE_SID_FLD_VEC_RSS, |
| ICE_SID_CDID_KEY_BUILDER_RSS, |
| ICE_SID_CDID_REDIR_RSS |
| }, |
| |
| /* PE */ |
| { |
| ICE_SID_XLT0_PE, |
| ICE_SID_XLT_KEY_BUILDER_PE, |
| ICE_SID_XLT1_PE, |
| ICE_SID_XLT2_PE, |
| ICE_SID_PROFID_TCAM_PE, |
| ICE_SID_PROFID_REDIR_PE, |
| ICE_SID_FLD_VEC_PE, |
| ICE_SID_CDID_KEY_BUILDER_PE, |
| ICE_SID_CDID_REDIR_PE |
| } |
| }; |
| |
| /** |
| * ice_sect_id - returns section ID |
| * @blk: block type |
| * @sect: section type |
| * |
| * This helper function returns the proper section ID given a block type and a |
| * section type. |
| */ |
| static u32 ice_sect_id(enum ice_block blk, enum ice_sect sect) |
| { |
| return ice_sect_lkup[blk][sect]; |
| } |
| |
| /** |
| * ice_hw_ptype_ena - check if the PTYPE is enabled or not |
| * @hw: pointer to the HW structure |
| * @ptype: the hardware PTYPE |
| */ |
| bool ice_hw_ptype_ena(struct ice_hw *hw, u16 ptype) |
| { |
| return ptype < ICE_FLOW_PTYPE_MAX && |
| test_bit(ptype, hw->hw_ptype); |
| } |
| |
| /* Key creation */ |
| |
| #define ICE_DC_KEY 0x1 /* don't care */ |
| #define ICE_DC_KEYINV 0x1 |
| #define ICE_NM_KEY 0x0 /* never match */ |
| #define ICE_NM_KEYINV 0x0 |
| #define ICE_0_KEY 0x1 /* match 0 */ |
| #define ICE_0_KEYINV 0x0 |
| #define ICE_1_KEY 0x0 /* match 1 */ |
| #define ICE_1_KEYINV 0x1 |
| |
| /** |
| * ice_gen_key_word - generate 16-bits of a key/mask word |
| * @val: the value |
| * @valid: valid bits mask (change only the valid bits) |
| * @dont_care: don't care mask |
| * @nvr_mtch: never match mask |
| * @key: pointer to an array of where the resulting key portion |
| * @key_inv: pointer to an array of where the resulting key invert portion |
| * |
| * This function generates 16-bits from a 8-bit value, an 8-bit don't care mask |
| * and an 8-bit never match mask. The 16-bits of output are divided into 8 bits |
| * of key and 8 bits of key invert. |
| * |
| * '0' = b01, always match a 0 bit |
| * '1' = b10, always match a 1 bit |
| * '?' = b11, don't care bit (always matches) |
| * '~' = b00, never match bit |
| * |
| * Input: |
| * val: b0 1 0 1 0 1 |
| * dont_care: b0 0 1 1 0 0 |
| * never_mtch: b0 0 0 0 1 1 |
| * ------------------------------ |
| * Result: key: b01 10 11 11 00 00 |
| */ |
| static int |
| ice_gen_key_word(u8 val, u8 valid, u8 dont_care, u8 nvr_mtch, u8 *key, |
| u8 *key_inv) |
| { |
| u8 in_key = *key, in_key_inv = *key_inv; |
| u8 i; |
| |
| /* 'dont_care' and 'nvr_mtch' masks cannot overlap */ |
| if ((dont_care ^ nvr_mtch) != (dont_care | nvr_mtch)) |
| return -EIO; |
| |
| *key = 0; |
| *key_inv = 0; |
| |
| /* encode the 8 bits into 8-bit key and 8-bit key invert */ |
| for (i = 0; i < 8; i++) { |
| *key >>= 1; |
| *key_inv >>= 1; |
| |
| if (!(valid & 0x1)) { /* change only valid bits */ |
| *key |= (in_key & 0x1) << 7; |
| *key_inv |= (in_key_inv & 0x1) << 7; |
| } else if (dont_care & 0x1) { /* don't care bit */ |
| *key |= ICE_DC_KEY << 7; |
| *key_inv |= ICE_DC_KEYINV << 7; |
| } else if (nvr_mtch & 0x1) { /* never match bit */ |
| *key |= ICE_NM_KEY << 7; |
| *key_inv |= ICE_NM_KEYINV << 7; |
| } else if (val & 0x01) { /* exact 1 match */ |
| *key |= ICE_1_KEY << 7; |
| *key_inv |= ICE_1_KEYINV << 7; |
| } else { /* exact 0 match */ |
| *key |= ICE_0_KEY << 7; |
| *key_inv |= ICE_0_KEYINV << 7; |
| } |
| |
| dont_care >>= 1; |
| nvr_mtch >>= 1; |
| valid >>= 1; |
| val >>= 1; |
| in_key >>= 1; |
| in_key_inv >>= 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_bits_max_set - determine if the number of bits set is within a maximum |
| * @mask: pointer to the byte array which is the mask |
| * @size: the number of bytes in the mask |
| * @max: the max number of set bits |
| * |
| * This function determines if there are at most 'max' number of bits set in an |
| * array. Returns true if the number for bits set is <= max or will return false |
| * otherwise. |
| */ |
| static bool ice_bits_max_set(const u8 *mask, u16 size, u16 max) |
| { |
| u16 count = 0; |
| u16 i; |
| |
| /* check each byte */ |
| for (i = 0; i < size; i++) { |
| /* if 0, go to next byte */ |
| if (!mask[i]) |
| continue; |
| |
| /* We know there is at least one set bit in this byte because of |
| * the above check; if we already have found 'max' number of |
| * bits set, then we can return failure now. |
| */ |
| if (count == max) |
| return false; |
| |
| /* count the bits in this byte, checking threshold */ |
| count += hweight8(mask[i]); |
| if (count > max) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * ice_set_key - generate a variable sized key with multiples of 16-bits |
| * @key: pointer to where the key will be stored |
| * @size: the size of the complete key in bytes (must be even) |
| * @val: array of 8-bit values that makes up the value portion of the key |
| * @upd: array of 8-bit masks that determine what key portion to update |
| * @dc: array of 8-bit masks that make up the don't care mask |
| * @nm: array of 8-bit masks that make up the never match mask |
| * @off: the offset of the first byte in the key to update |
| * @len: the number of bytes in the key update |
| * |
| * This function generates a key from a value, a don't care mask and a never |
| * match mask. |
| * upd, dc, and nm are optional parameters, and can be NULL: |
| * upd == NULL --> upd mask is all 1's (update all bits) |
| * dc == NULL --> dc mask is all 0's (no don't care bits) |
| * nm == NULL --> nm mask is all 0's (no never match bits) |
| */ |
| static int |
| ice_set_key(u8 *key, u16 size, u8 *val, u8 *upd, u8 *dc, u8 *nm, u16 off, |
| u16 len) |
| { |
| u16 half_size; |
| u16 i; |
| |
| /* size must be a multiple of 2 bytes. */ |
| if (size % 2) |
| return -EIO; |
| |
| half_size = size / 2; |
| if (off + len > half_size) |
| return -EIO; |
| |
| /* Make sure at most one bit is set in the never match mask. Having more |
| * than one never match mask bit set will cause HW to consume excessive |
| * power otherwise; this is a power management efficiency check. |
| */ |
| #define ICE_NVR_MTCH_BITS_MAX 1 |
| if (nm && !ice_bits_max_set(nm, len, ICE_NVR_MTCH_BITS_MAX)) |
| return -EIO; |
| |
| for (i = 0; i < len; i++) |
| if (ice_gen_key_word(val[i], upd ? upd[i] : 0xff, |
| dc ? dc[i] : 0, nm ? nm[i] : 0, |
| key + off + i, key + half_size + off + i)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_acquire_change_lock |
| * @hw: pointer to the HW structure |
| * @access: access type (read or write) |
| * |
| * This function will request ownership of the change lock. |
| */ |
| int |
| ice_acquire_change_lock(struct ice_hw *hw, enum ice_aq_res_access_type access) |
| { |
| return ice_acquire_res(hw, ICE_CHANGE_LOCK_RES_ID, access, |
| ICE_CHANGE_LOCK_TIMEOUT); |
| } |
| |
| /** |
| * ice_release_change_lock |
| * @hw: pointer to the HW structure |
| * |
| * This function will release the change lock using the proper Admin Command. |
| */ |
| void ice_release_change_lock(struct ice_hw *hw) |
| { |
| ice_release_res(hw, ICE_CHANGE_LOCK_RES_ID); |
| } |
| |
| /** |
| * ice_get_open_tunnel_port - retrieve an open tunnel port |
| * @hw: pointer to the HW structure |
| * @port: returns open port |
| * @type: type of tunnel, can be TNL_LAST if it doesn't matter |
| */ |
| bool |
| ice_get_open_tunnel_port(struct ice_hw *hw, u16 *port, |
| enum ice_tunnel_type type) |
| { |
| bool res = false; |
| u16 i; |
| |
| mutex_lock(&hw->tnl_lock); |
| |
| for (i = 0; i < hw->tnl.count && i < ICE_TUNNEL_MAX_ENTRIES; i++) |
| if (hw->tnl.tbl[i].valid && hw->tnl.tbl[i].port && |
| (type == TNL_LAST || type == hw->tnl.tbl[i].type)) { |
| *port = hw->tnl.tbl[i].port; |
| res = true; |
| break; |
| } |
| |
| mutex_unlock(&hw->tnl_lock); |
| |
| return res; |
| } |
| |
| /** |
| * ice_upd_dvm_boost_entry |
| * @hw: pointer to the HW structure |
| * @entry: pointer to double vlan boost entry info |
| */ |
| static int |
| ice_upd_dvm_boost_entry(struct ice_hw *hw, struct ice_dvm_entry *entry) |
| { |
| struct ice_boost_tcam_section *sect_rx, *sect_tx; |
| int status = -ENOSPC; |
| struct ice_buf_build *bld; |
| u8 val, dc, nm; |
| |
| bld = ice_pkg_buf_alloc(hw); |
| if (!bld) |
| return -ENOMEM; |
| |
| /* allocate 2 sections, one for Rx parser, one for Tx parser */ |
| if (ice_pkg_buf_reserve_section(bld, 2)) |
| goto ice_upd_dvm_boost_entry_err; |
| |
| sect_rx = ice_pkg_buf_alloc_section(bld, ICE_SID_RXPARSER_BOOST_TCAM, |
| struct_size(sect_rx, tcam, 1)); |
| if (!sect_rx) |
| goto ice_upd_dvm_boost_entry_err; |
| sect_rx->count = cpu_to_le16(1); |
| |
| sect_tx = ice_pkg_buf_alloc_section(bld, ICE_SID_TXPARSER_BOOST_TCAM, |
| struct_size(sect_tx, tcam, 1)); |
| if (!sect_tx) |
| goto ice_upd_dvm_boost_entry_err; |
| sect_tx->count = cpu_to_le16(1); |
| |
| /* copy original boost entry to update package buffer */ |
| memcpy(sect_rx->tcam, entry->boost_entry, sizeof(*sect_rx->tcam)); |
| |
| /* re-write the don't care and never match bits accordingly */ |
| if (entry->enable) { |
| /* all bits are don't care */ |
| val = 0x00; |
| dc = 0xFF; |
| nm = 0x00; |
| } else { |
| /* disable, one never match bit, the rest are don't care */ |
| val = 0x00; |
| dc = 0xF7; |
| nm = 0x08; |
| } |
| |
| ice_set_key((u8 *)§_rx->tcam[0].key, sizeof(sect_rx->tcam[0].key), |
| &val, NULL, &dc, &nm, 0, sizeof(u8)); |
| |
| /* exact copy of entry to Tx section entry */ |
| memcpy(sect_tx->tcam, sect_rx->tcam, sizeof(*sect_tx->tcam)); |
| |
| status = ice_update_pkg_no_lock(hw, ice_pkg_buf(bld), 1); |
| |
| ice_upd_dvm_boost_entry_err: |
| ice_pkg_buf_free(hw, bld); |
| |
| return status; |
| } |
| |
| /** |
| * ice_set_dvm_boost_entries |
| * @hw: pointer to the HW structure |
| * |
| * Enable double vlan by updating the appropriate boost tcam entries. |
| */ |
| int ice_set_dvm_boost_entries(struct ice_hw *hw) |
| { |
| u16 i; |
| |
| for (i = 0; i < hw->dvm_upd.count; i++) { |
| int status; |
| |
| status = ice_upd_dvm_boost_entry(hw, &hw->dvm_upd.tbl[i]); |
| if (status) |
| return status; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_tunnel_idx_to_entry - convert linear index to the sparse one |
| * @hw: pointer to the HW structure |
| * @type: type of tunnel |
| * @idx: linear index |
| * |
| * Stack assumes we have 2 linear tables with indexes [0, count_valid), |
| * but really the port table may be sprase, and types are mixed, so convert |
| * the stack index into the device index. |
| */ |
| static u16 ice_tunnel_idx_to_entry(struct ice_hw *hw, enum ice_tunnel_type type, |
| u16 idx) |
| { |
| u16 i; |
| |
| for (i = 0; i < hw->tnl.count && i < ICE_TUNNEL_MAX_ENTRIES; i++) |
| if (hw->tnl.tbl[i].valid && |
| hw->tnl.tbl[i].type == type && |
| idx-- == 0) |
| return i; |
| |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| |
| /** |
| * ice_create_tunnel |
| * @hw: pointer to the HW structure |
| * @index: device table entry |
| * @type: type of tunnel |
| * @port: port of tunnel to create |
| * |
| * Create a tunnel by updating the parse graph in the parser. We do that by |
| * creating a package buffer with the tunnel info and issuing an update package |
| * command. |
| */ |
| static int |
| ice_create_tunnel(struct ice_hw *hw, u16 index, |
| enum ice_tunnel_type type, u16 port) |
| { |
| struct ice_boost_tcam_section *sect_rx, *sect_tx; |
| struct ice_buf_build *bld; |
| int status = -ENOSPC; |
| |
| mutex_lock(&hw->tnl_lock); |
| |
| bld = ice_pkg_buf_alloc(hw); |
| if (!bld) { |
| status = -ENOMEM; |
| goto ice_create_tunnel_end; |
| } |
| |
| /* allocate 2 sections, one for Rx parser, one for Tx parser */ |
| if (ice_pkg_buf_reserve_section(bld, 2)) |
| goto ice_create_tunnel_err; |
| |
| sect_rx = ice_pkg_buf_alloc_section(bld, ICE_SID_RXPARSER_BOOST_TCAM, |
| struct_size(sect_rx, tcam, 1)); |
| if (!sect_rx) |
| goto ice_create_tunnel_err; |
| sect_rx->count = cpu_to_le16(1); |
| |
| sect_tx = ice_pkg_buf_alloc_section(bld, ICE_SID_TXPARSER_BOOST_TCAM, |
| struct_size(sect_tx, tcam, 1)); |
| if (!sect_tx) |
| goto ice_create_tunnel_err; |
| sect_tx->count = cpu_to_le16(1); |
| |
| /* copy original boost entry to update package buffer */ |
| memcpy(sect_rx->tcam, hw->tnl.tbl[index].boost_entry, |
| sizeof(*sect_rx->tcam)); |
| |
| /* over-write the never-match dest port key bits with the encoded port |
| * bits |
| */ |
| ice_set_key((u8 *)§_rx->tcam[0].key, sizeof(sect_rx->tcam[0].key), |
| (u8 *)&port, NULL, NULL, NULL, |
| (u16)offsetof(struct ice_boost_key_value, hv_dst_port_key), |
| sizeof(sect_rx->tcam[0].key.key.hv_dst_port_key)); |
| |
| /* exact copy of entry to Tx section entry */ |
| memcpy(sect_tx->tcam, sect_rx->tcam, sizeof(*sect_tx->tcam)); |
| |
| status = ice_update_pkg(hw, ice_pkg_buf(bld), 1); |
| if (!status) |
| hw->tnl.tbl[index].port = port; |
| |
| ice_create_tunnel_err: |
| ice_pkg_buf_free(hw, bld); |
| |
| ice_create_tunnel_end: |
| mutex_unlock(&hw->tnl_lock); |
| |
| return status; |
| } |
| |
| /** |
| * ice_destroy_tunnel |
| * @hw: pointer to the HW structure |
| * @index: device table entry |
| * @type: type of tunnel |
| * @port: port of tunnel to destroy (ignored if the all parameter is true) |
| * |
| * Destroys a tunnel or all tunnels by creating an update package buffer |
| * targeting the specific updates requested and then performing an update |
| * package. |
| */ |
| static int |
| ice_destroy_tunnel(struct ice_hw *hw, u16 index, enum ice_tunnel_type type, |
| u16 port) |
| { |
| struct ice_boost_tcam_section *sect_rx, *sect_tx; |
| struct ice_buf_build *bld; |
| int status = -ENOSPC; |
| |
| mutex_lock(&hw->tnl_lock); |
| |
| if (WARN_ON(!hw->tnl.tbl[index].valid || |
| hw->tnl.tbl[index].type != type || |
| hw->tnl.tbl[index].port != port)) { |
| status = -EIO; |
| goto ice_destroy_tunnel_end; |
| } |
| |
| bld = ice_pkg_buf_alloc(hw); |
| if (!bld) { |
| status = -ENOMEM; |
| goto ice_destroy_tunnel_end; |
| } |
| |
| /* allocate 2 sections, one for Rx parser, one for Tx parser */ |
| if (ice_pkg_buf_reserve_section(bld, 2)) |
| goto ice_destroy_tunnel_err; |
| |
| sect_rx = ice_pkg_buf_alloc_section(bld, ICE_SID_RXPARSER_BOOST_TCAM, |
| struct_size(sect_rx, tcam, 1)); |
| if (!sect_rx) |
| goto ice_destroy_tunnel_err; |
| sect_rx->count = cpu_to_le16(1); |
| |
| sect_tx = ice_pkg_buf_alloc_section(bld, ICE_SID_TXPARSER_BOOST_TCAM, |
| struct_size(sect_tx, tcam, 1)); |
| if (!sect_tx) |
| goto ice_destroy_tunnel_err; |
| sect_tx->count = cpu_to_le16(1); |
| |
| /* copy original boost entry to update package buffer, one copy to Rx |
| * section, another copy to the Tx section |
| */ |
| memcpy(sect_rx->tcam, hw->tnl.tbl[index].boost_entry, |
| sizeof(*sect_rx->tcam)); |
| memcpy(sect_tx->tcam, hw->tnl.tbl[index].boost_entry, |
| sizeof(*sect_tx->tcam)); |
| |
| status = ice_update_pkg(hw, ice_pkg_buf(bld), 1); |
| if (!status) |
| hw->tnl.tbl[index].port = 0; |
| |
| ice_destroy_tunnel_err: |
| ice_pkg_buf_free(hw, bld); |
| |
| ice_destroy_tunnel_end: |
| mutex_unlock(&hw->tnl_lock); |
| |
| return status; |
| } |
| |
| int ice_udp_tunnel_set_port(struct net_device *netdev, unsigned int table, |
| unsigned int idx, struct udp_tunnel_info *ti) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| enum ice_tunnel_type tnl_type; |
| int status; |
| u16 index; |
| |
| tnl_type = ti->type == UDP_TUNNEL_TYPE_VXLAN ? TNL_VXLAN : TNL_GENEVE; |
| index = ice_tunnel_idx_to_entry(&pf->hw, tnl_type, idx); |
| |
| status = ice_create_tunnel(&pf->hw, index, tnl_type, ntohs(ti->port)); |
| if (status) { |
| netdev_err(netdev, "Error adding UDP tunnel - %d\n", |
| status); |
| return -EIO; |
| } |
| |
| udp_tunnel_nic_set_port_priv(netdev, table, idx, index); |
| return 0; |
| } |
| |
| int ice_udp_tunnel_unset_port(struct net_device *netdev, unsigned int table, |
| unsigned int idx, struct udp_tunnel_info *ti) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| enum ice_tunnel_type tnl_type; |
| int status; |
| |
| tnl_type = ti->type == UDP_TUNNEL_TYPE_VXLAN ? TNL_VXLAN : TNL_GENEVE; |
| |
| status = ice_destroy_tunnel(&pf->hw, ti->hw_priv, tnl_type, |
| ntohs(ti->port)); |
| if (status) { |
| netdev_err(netdev, "Error removing UDP tunnel - %d\n", |
| status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_find_prot_off - find prot ID and offset pair, based on prof and FV index |
| * @hw: pointer to the hardware structure |
| * @blk: hardware block |
| * @prof: profile ID |
| * @fv_idx: field vector word index |
| * @prot: variable to receive the protocol ID |
| * @off: variable to receive the protocol offset |
| */ |
| int |
| ice_find_prot_off(struct ice_hw *hw, enum ice_block blk, u8 prof, u16 fv_idx, |
| u8 *prot, u16 *off) |
| { |
| struct ice_fv_word *fv_ext; |
| |
| if (prof >= hw->blk[blk].es.count) |
| return -EINVAL; |
| |
| if (fv_idx >= hw->blk[blk].es.fvw) |
| return -EINVAL; |
| |
| fv_ext = hw->blk[blk].es.t + (prof * hw->blk[blk].es.fvw); |
| |
| *prot = fv_ext[fv_idx].prot_id; |
| *off = fv_ext[fv_idx].off; |
| |
| return 0; |
| } |
| |
| /* PTG Management */ |
| |
| /** |
| * ice_ptg_find_ptype - Search for packet type group using packet type (ptype) |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @ptype: the ptype to search for |
| * @ptg: pointer to variable that receives the PTG |
| * |
| * This function will search the PTGs for a particular ptype, returning the |
| * PTG ID that contains it through the PTG parameter, with the value of |
| * ICE_DEFAULT_PTG (0) meaning it is part the default PTG. |
| */ |
| static int |
| ice_ptg_find_ptype(struct ice_hw *hw, enum ice_block blk, u16 ptype, u8 *ptg) |
| { |
| if (ptype >= ICE_XLT1_CNT || !ptg) |
| return -EINVAL; |
| |
| *ptg = hw->blk[blk].xlt1.ptypes[ptype].ptg; |
| return 0; |
| } |
| |
| /** |
| * ice_ptg_alloc_val - Allocates a new packet type group ID by value |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @ptg: the PTG to allocate |
| * |
| * This function allocates a given packet type group ID specified by the PTG |
| * parameter. |
| */ |
| static void ice_ptg_alloc_val(struct ice_hw *hw, enum ice_block blk, u8 ptg) |
| { |
| hw->blk[blk].xlt1.ptg_tbl[ptg].in_use = true; |
| } |
| |
| /** |
| * ice_ptg_remove_ptype - Removes ptype from a particular packet type group |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @ptype: the ptype to remove |
| * @ptg: the PTG to remove the ptype from |
| * |
| * This function will remove the ptype from the specific PTG, and move it to |
| * the default PTG (ICE_DEFAULT_PTG). |
| */ |
| static int |
| ice_ptg_remove_ptype(struct ice_hw *hw, enum ice_block blk, u16 ptype, u8 ptg) |
| { |
| struct ice_ptg_ptype **ch; |
| struct ice_ptg_ptype *p; |
| |
| if (ptype > ICE_XLT1_CNT - 1) |
| return -EINVAL; |
| |
| if (!hw->blk[blk].xlt1.ptg_tbl[ptg].in_use) |
| return -ENOENT; |
| |
| /* Should not happen if .in_use is set, bad config */ |
| if (!hw->blk[blk].xlt1.ptg_tbl[ptg].first_ptype) |
| return -EIO; |
| |
| /* find the ptype within this PTG, and bypass the link over it */ |
| p = hw->blk[blk].xlt1.ptg_tbl[ptg].first_ptype; |
| ch = &hw->blk[blk].xlt1.ptg_tbl[ptg].first_ptype; |
| while (p) { |
| if (ptype == (p - hw->blk[blk].xlt1.ptypes)) { |
| *ch = p->next_ptype; |
| break; |
| } |
| |
| ch = &p->next_ptype; |
| p = p->next_ptype; |
| } |
| |
| hw->blk[blk].xlt1.ptypes[ptype].ptg = ICE_DEFAULT_PTG; |
| hw->blk[blk].xlt1.ptypes[ptype].next_ptype = NULL; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_ptg_add_mv_ptype - Adds/moves ptype to a particular packet type group |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @ptype: the ptype to add or move |
| * @ptg: the PTG to add or move the ptype to |
| * |
| * This function will either add or move a ptype to a particular PTG depending |
| * on if the ptype is already part of another group. Note that using a |
| * destination PTG ID of ICE_DEFAULT_PTG (0) will move the ptype to the |
| * default PTG. |
| */ |
| static int |
| ice_ptg_add_mv_ptype(struct ice_hw *hw, enum ice_block blk, u16 ptype, u8 ptg) |
| { |
| u8 original_ptg; |
| int status; |
| |
| if (ptype > ICE_XLT1_CNT - 1) |
| return -EINVAL; |
| |
| if (!hw->blk[blk].xlt1.ptg_tbl[ptg].in_use && ptg != ICE_DEFAULT_PTG) |
| return -ENOENT; |
| |
| status = ice_ptg_find_ptype(hw, blk, ptype, &original_ptg); |
| if (status) |
| return status; |
| |
| /* Is ptype already in the correct PTG? */ |
| if (original_ptg == ptg) |
| return 0; |
| |
| /* Remove from original PTG and move back to the default PTG */ |
| if (original_ptg != ICE_DEFAULT_PTG) |
| ice_ptg_remove_ptype(hw, blk, ptype, original_ptg); |
| |
| /* Moving to default PTG? Then we're done with this request */ |
| if (ptg == ICE_DEFAULT_PTG) |
| return 0; |
| |
| /* Add ptype to PTG at beginning of list */ |
| hw->blk[blk].xlt1.ptypes[ptype].next_ptype = |
| hw->blk[blk].xlt1.ptg_tbl[ptg].first_ptype; |
| hw->blk[blk].xlt1.ptg_tbl[ptg].first_ptype = |
| &hw->blk[blk].xlt1.ptypes[ptype]; |
| |
| hw->blk[blk].xlt1.ptypes[ptype].ptg = ptg; |
| hw->blk[blk].xlt1.t[ptype] = ptg; |
| |
| return 0; |
| } |
| |
| /* Block / table size info */ |
| struct ice_blk_size_details { |
| u16 xlt1; /* # XLT1 entries */ |
| u16 xlt2; /* # XLT2 entries */ |
| u16 prof_tcam; /* # profile ID TCAM entries */ |
| u16 prof_id; /* # profile IDs */ |
| u8 prof_cdid_bits; /* # CDID one-hot bits used in key */ |
| u16 prof_redir; /* # profile redirection entries */ |
| u16 es; /* # extraction sequence entries */ |
| u16 fvw; /* # field vector words */ |
| u8 overwrite; /* overwrite existing entries allowed */ |
| u8 reverse; /* reverse FV order */ |
| }; |
| |
| static const struct ice_blk_size_details blk_sizes[ICE_BLK_COUNT] = { |
| /** |
| * Table Definitions |
| * XLT1 - Number of entries in XLT1 table |
| * XLT2 - Number of entries in XLT2 table |
| * TCAM - Number of entries Profile ID TCAM table |
| * CDID - Control Domain ID of the hardware block |
| * PRED - Number of entries in the Profile Redirection Table |
| * FV - Number of entries in the Field Vector |
| * FVW - Width (in WORDs) of the Field Vector |
| * OVR - Overwrite existing table entries |
| * REV - Reverse FV |
| */ |
| /* XLT1 , XLT2 ,TCAM, PID,CDID,PRED, FV, FVW */ |
| /* Overwrite , Reverse FV */ |
| /* SW */ { ICE_XLT1_CNT, ICE_XLT2_CNT, 512, 256, 0, 256, 256, 48, |
| false, false }, |
| /* ACL */ { ICE_XLT1_CNT, ICE_XLT2_CNT, 512, 128, 0, 128, 128, 32, |
| false, false }, |
| /* FD */ { ICE_XLT1_CNT, ICE_XLT2_CNT, 512, 128, 0, 128, 128, 24, |
| false, true }, |
| /* RSS */ { ICE_XLT1_CNT, ICE_XLT2_CNT, 512, 128, 0, 128, 128, 24, |
| true, true }, |
| /* PE */ { ICE_XLT1_CNT, ICE_XLT2_CNT, 64, 32, 0, 32, 32, 24, |
| false, false }, |
| }; |
| |
| enum ice_sid_all { |
| ICE_SID_XLT1_OFF = 0, |
| ICE_SID_XLT2_OFF, |
| ICE_SID_PR_OFF, |
| ICE_SID_PR_REDIR_OFF, |
| ICE_SID_ES_OFF, |
| ICE_SID_OFF_COUNT, |
| }; |
| |
| /* Characteristic handling */ |
| |
| /** |
| * ice_match_prop_lst - determine if properties of two lists match |
| * @list1: first properties list |
| * @list2: second properties list |
| * |
| * Count, cookies and the order must match in order to be considered equivalent. |
| */ |
| static bool |
| ice_match_prop_lst(struct list_head *list1, struct list_head *list2) |
| { |
| struct ice_vsig_prof *tmp1; |
| struct ice_vsig_prof *tmp2; |
| u16 chk_count = 0; |
| u16 count = 0; |
| |
| /* compare counts */ |
| list_for_each_entry(tmp1, list1, list) |
| count++; |
| list_for_each_entry(tmp2, list2, list) |
| chk_count++; |
| if (!count || count != chk_count) |
| return false; |
| |
| tmp1 = list_first_entry(list1, struct ice_vsig_prof, list); |
| tmp2 = list_first_entry(list2, struct ice_vsig_prof, list); |
| |
| /* profile cookies must compare, and in the exact same order to take |
| * into account priority |
| */ |
| while (count--) { |
| if (tmp2->profile_cookie != tmp1->profile_cookie) |
| return false; |
| |
| tmp1 = list_next_entry(tmp1, list); |
| tmp2 = list_next_entry(tmp2, list); |
| } |
| |
| return true; |
| } |
| |
| /* VSIG Management */ |
| |
| /** |
| * ice_vsig_find_vsi - find a VSIG that contains a specified VSI |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsi: VSI of interest |
| * @vsig: pointer to receive the VSI group |
| * |
| * This function will lookup the VSI entry in the XLT2 list and return |
| * the VSI group its associated with. |
| */ |
| static int |
| ice_vsig_find_vsi(struct ice_hw *hw, enum ice_block blk, u16 vsi, u16 *vsig) |
| { |
| if (!vsig || vsi >= ICE_MAX_VSI) |
| return -EINVAL; |
| |
| /* As long as there's a default or valid VSIG associated with the input |
| * VSI, the functions returns a success. Any handling of VSIG will be |
| * done by the following add, update or remove functions. |
| */ |
| *vsig = hw->blk[blk].xlt2.vsis[vsi].vsig; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_vsig_alloc_val - allocate a new VSIG by value |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsig: the VSIG to allocate |
| * |
| * This function will allocate a given VSIG specified by the VSIG parameter. |
| */ |
| static u16 ice_vsig_alloc_val(struct ice_hw *hw, enum ice_block blk, u16 vsig) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| |
| if (!hw->blk[blk].xlt2.vsig_tbl[idx].in_use) { |
| INIT_LIST_HEAD(&hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst); |
| hw->blk[blk].xlt2.vsig_tbl[idx].in_use = true; |
| } |
| |
| return ICE_VSIG_VALUE(idx, hw->pf_id); |
| } |
| |
| /** |
| * ice_vsig_alloc - Finds a free entry and allocates a new VSIG |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * |
| * This function will iterate through the VSIG list and mark the first |
| * unused entry for the new VSIG entry as used and return that value. |
| */ |
| static u16 ice_vsig_alloc(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 i; |
| |
| for (i = 1; i < ICE_MAX_VSIGS; i++) |
| if (!hw->blk[blk].xlt2.vsig_tbl[i].in_use) |
| return ice_vsig_alloc_val(hw, blk, i); |
| |
| return ICE_DEFAULT_VSIG; |
| } |
| |
| /** |
| * ice_find_dup_props_vsig - find VSI group with a specified set of properties |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @chs: characteristic list |
| * @vsig: returns the VSIG with the matching profiles, if found |
| * |
| * Each VSIG is associated with a characteristic set; i.e. all VSIs under |
| * a group have the same characteristic set. To check if there exists a VSIG |
| * which has the same characteristics as the input characteristics; this |
| * function will iterate through the XLT2 list and return the VSIG that has a |
| * matching configuration. In order to make sure that priorities are accounted |
| * for, the list must match exactly, including the order in which the |
| * characteristics are listed. |
| */ |
| static int |
| ice_find_dup_props_vsig(struct ice_hw *hw, enum ice_block blk, |
| struct list_head *chs, u16 *vsig) |
| { |
| struct ice_xlt2 *xlt2 = &hw->blk[blk].xlt2; |
| u16 i; |
| |
| for (i = 0; i < xlt2->count; i++) |
| if (xlt2->vsig_tbl[i].in_use && |
| ice_match_prop_lst(chs, &xlt2->vsig_tbl[i].prop_lst)) { |
| *vsig = ICE_VSIG_VALUE(i, hw->pf_id); |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| /** |
| * ice_vsig_free - free VSI group |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsig: VSIG to remove |
| * |
| * The function will remove all VSIs associated with the input VSIG and move |
| * them to the DEFAULT_VSIG and mark the VSIG available. |
| */ |
| static int ice_vsig_free(struct ice_hw *hw, enum ice_block blk, u16 vsig) |
| { |
| struct ice_vsig_prof *dtmp, *del; |
| struct ice_vsig_vsi *vsi_cur; |
| u16 idx; |
| |
| idx = vsig & ICE_VSIG_IDX_M; |
| if (idx >= ICE_MAX_VSIGS) |
| return -EINVAL; |
| |
| if (!hw->blk[blk].xlt2.vsig_tbl[idx].in_use) |
| return -ENOENT; |
| |
| hw->blk[blk].xlt2.vsig_tbl[idx].in_use = false; |
| |
| vsi_cur = hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi; |
| /* If the VSIG has at least 1 VSI then iterate through the |
| * list and remove the VSIs before deleting the group. |
| */ |
| if (vsi_cur) { |
| /* remove all vsis associated with this VSIG XLT2 entry */ |
| do { |
| struct ice_vsig_vsi *tmp = vsi_cur->next_vsi; |
| |
| vsi_cur->vsig = ICE_DEFAULT_VSIG; |
| vsi_cur->changed = 1; |
| vsi_cur->next_vsi = NULL; |
| vsi_cur = tmp; |
| } while (vsi_cur); |
| |
| /* NULL terminate head of VSI list */ |
| hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi = NULL; |
| } |
| |
| /* free characteristic list */ |
| list_for_each_entry_safe(del, dtmp, |
| &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) { |
| list_del(&del->list); |
| devm_kfree(ice_hw_to_dev(hw), del); |
| } |
| |
| /* if VSIG characteristic list was cleared for reset |
| * re-initialize the list head |
| */ |
| INIT_LIST_HEAD(&hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_vsig_remove_vsi - remove VSI from VSIG |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsi: VSI to remove |
| * @vsig: VSI group to remove from |
| * |
| * The function will remove the input VSI from its VSI group and move it |
| * to the DEFAULT_VSIG. |
| */ |
| static int |
| ice_vsig_remove_vsi(struct ice_hw *hw, enum ice_block blk, u16 vsi, u16 vsig) |
| { |
| struct ice_vsig_vsi **vsi_head, *vsi_cur, *vsi_tgt; |
| u16 idx; |
| |
| idx = vsig & ICE_VSIG_IDX_M; |
| |
| if (vsi >= ICE_MAX_VSI || idx >= ICE_MAX_VSIGS) |
| return -EINVAL; |
| |
| if (!hw->blk[blk].xlt2.vsig_tbl[idx].in_use) |
| return -ENOENT; |
| |
| /* entry already in default VSIG, don't have to remove */ |
| if (idx == ICE_DEFAULT_VSIG) |
| return 0; |
| |
| vsi_head = &hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi; |
| if (!(*vsi_head)) |
| return -EIO; |
| |
| vsi_tgt = &hw->blk[blk].xlt2.vsis[vsi]; |
| vsi_cur = (*vsi_head); |
| |
| /* iterate the VSI list, skip over the entry to be removed */ |
| while (vsi_cur) { |
| if (vsi_tgt == vsi_cur) { |
| (*vsi_head) = vsi_cur->next_vsi; |
| break; |
| } |
| vsi_head = &vsi_cur->next_vsi; |
| vsi_cur = vsi_cur->next_vsi; |
| } |
| |
| /* verify if VSI was removed from group list */ |
| if (!vsi_cur) |
| return -ENOENT; |
| |
| vsi_cur->vsig = ICE_DEFAULT_VSIG; |
| vsi_cur->changed = 1; |
| vsi_cur->next_vsi = NULL; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_vsig_add_mv_vsi - add or move a VSI to a VSI group |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsi: VSI to move |
| * @vsig: destination VSI group |
| * |
| * This function will move or add the input VSI to the target VSIG. |
| * The function will find the original VSIG the VSI belongs to and |
| * move the entry to the DEFAULT_VSIG, update the original VSIG and |
| * then move entry to the new VSIG. |
| */ |
| static int |
| ice_vsig_add_mv_vsi(struct ice_hw *hw, enum ice_block blk, u16 vsi, u16 vsig) |
| { |
| struct ice_vsig_vsi *tmp; |
| u16 orig_vsig, idx; |
| int status; |
| |
| idx = vsig & ICE_VSIG_IDX_M; |
| |
| if (vsi >= ICE_MAX_VSI || idx >= ICE_MAX_VSIGS) |
| return -EINVAL; |
| |
| /* if VSIG not in use and VSIG is not default type this VSIG |
| * doesn't exist. |
| */ |
| if (!hw->blk[blk].xlt2.vsig_tbl[idx].in_use && |
| vsig != ICE_DEFAULT_VSIG) |
| return -ENOENT; |
| |
| status = ice_vsig_find_vsi(hw, blk, vsi, &orig_vsig); |
| if (status) |
| return status; |
| |
| /* no update required if vsigs match */ |
| if (orig_vsig == vsig) |
| return 0; |
| |
| if (orig_vsig != ICE_DEFAULT_VSIG) { |
| /* remove entry from orig_vsig and add to default VSIG */ |
| status = ice_vsig_remove_vsi(hw, blk, vsi, orig_vsig); |
| if (status) |
| return status; |
| } |
| |
| if (idx == ICE_DEFAULT_VSIG) |
| return 0; |
| |
| /* Create VSI entry and add VSIG and prop_mask values */ |
| hw->blk[blk].xlt2.vsis[vsi].vsig = vsig; |
| hw->blk[blk].xlt2.vsis[vsi].changed = 1; |
| |
| /* Add new entry to the head of the VSIG list */ |
| tmp = hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi; |
| hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi = |
| &hw->blk[blk].xlt2.vsis[vsi]; |
| hw->blk[blk].xlt2.vsis[vsi].next_vsi = tmp; |
| hw->blk[blk].xlt2.t[vsi] = vsig; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_prof_has_mask_idx - determine if profile index masking is identical |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @prof: profile to check |
| * @idx: profile index to check |
| * @mask: mask to match |
| */ |
| static bool |
| ice_prof_has_mask_idx(struct ice_hw *hw, enum ice_block blk, u8 prof, u16 idx, |
| u16 mask) |
| { |
| bool expect_no_mask = false; |
| bool found = false; |
| bool match = false; |
| u16 i; |
| |
| /* If mask is 0x0000 or 0xffff, then there is no masking */ |
| if (mask == 0 || mask == 0xffff) |
| expect_no_mask = true; |
| |
| /* Scan the enabled masks on this profile, for the specified idx */ |
| for (i = hw->blk[blk].masks.first; i < hw->blk[blk].masks.first + |
| hw->blk[blk].masks.count; i++) |
| if (hw->blk[blk].es.mask_ena[prof] & BIT(i)) |
| if (hw->blk[blk].masks.masks[i].in_use && |
| hw->blk[blk].masks.masks[i].idx == idx) { |
| found = true; |
| if (hw->blk[blk].masks.masks[i].mask == mask) |
| match = true; |
| break; |
| } |
| |
| if (expect_no_mask) { |
| if (found) |
| return false; |
| } else { |
| if (!match) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * ice_prof_has_mask - determine if profile masking is identical |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @prof: profile to check |
| * @masks: masks to match |
| */ |
| static bool |
| ice_prof_has_mask(struct ice_hw *hw, enum ice_block blk, u8 prof, u16 *masks) |
| { |
| u16 i; |
| |
| /* es->mask_ena[prof] will have the mask */ |
| for (i = 0; i < hw->blk[blk].es.fvw; i++) |
| if (!ice_prof_has_mask_idx(hw, blk, prof, i, masks[i])) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * ice_find_prof_id_with_mask - find profile ID for a given field vector |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @fv: field vector to search for |
| * @masks: masks for FV |
| * @symm: symmetric setting for RSS flows |
| * @prof_id: receives the profile ID |
| */ |
| static int |
| ice_find_prof_id_with_mask(struct ice_hw *hw, enum ice_block blk, |
| struct ice_fv_word *fv, u16 *masks, bool symm, |
| u8 *prof_id) |
| { |
| struct ice_es *es = &hw->blk[blk].es; |
| u8 i; |
| |
| /* For FD, we don't want to re-use a existed profile with the same |
| * field vector and mask. This will cause rule interference. |
| */ |
| if (blk == ICE_BLK_FD) |
| return -ENOENT; |
| |
| for (i = 0; i < (u8)es->count; i++) { |
| u16 off = i * es->fvw; |
| |
| if (blk == ICE_BLK_RSS && es->symm[i] != symm) |
| continue; |
| |
| if (memcmp(&es->t[off], fv, es->fvw * sizeof(*fv))) |
| continue; |
| |
| /* check if masks settings are the same for this profile */ |
| if (masks && !ice_prof_has_mask(hw, blk, i, masks)) |
| continue; |
| |
| *prof_id = i; |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| /** |
| * ice_prof_id_rsrc_type - get profile ID resource type for a block type |
| * @blk: the block type |
| * @rsrc_type: pointer to variable to receive the resource type |
| */ |
| static bool ice_prof_id_rsrc_type(enum ice_block blk, u16 *rsrc_type) |
| { |
| switch (blk) { |
| case ICE_BLK_FD: |
| *rsrc_type = ICE_AQC_RES_TYPE_FD_PROF_BLDR_PROFID; |
| break; |
| case ICE_BLK_RSS: |
| *rsrc_type = ICE_AQC_RES_TYPE_HASH_PROF_BLDR_PROFID; |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| /** |
| * ice_tcam_ent_rsrc_type - get TCAM entry resource type for a block type |
| * @blk: the block type |
| * @rsrc_type: pointer to variable to receive the resource type |
| */ |
| static bool ice_tcam_ent_rsrc_type(enum ice_block blk, u16 *rsrc_type) |
| { |
| switch (blk) { |
| case ICE_BLK_FD: |
| *rsrc_type = ICE_AQC_RES_TYPE_FD_PROF_BLDR_TCAM; |
| break; |
| case ICE_BLK_RSS: |
| *rsrc_type = ICE_AQC_RES_TYPE_HASH_PROF_BLDR_TCAM; |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| /** |
| * ice_alloc_tcam_ent - allocate hardware TCAM entry |
| * @hw: pointer to the HW struct |
| * @blk: the block to allocate the TCAM for |
| * @btm: true to allocate from bottom of table, false to allocate from top |
| * @tcam_idx: pointer to variable to receive the TCAM entry |
| * |
| * This function allocates a new entry in a Profile ID TCAM for a specific |
| * block. |
| */ |
| static int |
| ice_alloc_tcam_ent(struct ice_hw *hw, enum ice_block blk, bool btm, |
| u16 *tcam_idx) |
| { |
| u16 res_type; |
| |
| if (!ice_tcam_ent_rsrc_type(blk, &res_type)) |
| return -EINVAL; |
| |
| return ice_alloc_hw_res(hw, res_type, 1, btm, tcam_idx); |
| } |
| |
| /** |
| * ice_free_tcam_ent - free hardware TCAM entry |
| * @hw: pointer to the HW struct |
| * @blk: the block from which to free the TCAM entry |
| * @tcam_idx: the TCAM entry to free |
| * |
| * This function frees an entry in a Profile ID TCAM for a specific block. |
| */ |
| static int |
| ice_free_tcam_ent(struct ice_hw *hw, enum ice_block blk, u16 tcam_idx) |
| { |
| u16 res_type; |
| |
| if (!ice_tcam_ent_rsrc_type(blk, &res_type)) |
| return -EINVAL; |
| |
| return ice_free_hw_res(hw, res_type, 1, &tcam_idx); |
| } |
| |
| /** |
| * ice_alloc_prof_id - allocate profile ID |
| * @hw: pointer to the HW struct |
| * @blk: the block to allocate the profile ID for |
| * @prof_id: pointer to variable to receive the profile ID |
| * |
| * This function allocates a new profile ID, which also corresponds to a Field |
| * Vector (Extraction Sequence) entry. |
| */ |
| static int ice_alloc_prof_id(struct ice_hw *hw, enum ice_block blk, u8 *prof_id) |
| { |
| u16 res_type; |
| u16 get_prof; |
| int status; |
| |
| if (!ice_prof_id_rsrc_type(blk, &res_type)) |
| return -EINVAL; |
| |
| status = ice_alloc_hw_res(hw, res_type, 1, false, &get_prof); |
| if (!status) |
| *prof_id = (u8)get_prof; |
| |
| return status; |
| } |
| |
| /** |
| * ice_free_prof_id - free profile ID |
| * @hw: pointer to the HW struct |
| * @blk: the block from which to free the profile ID |
| * @prof_id: the profile ID to free |
| * |
| * This function frees a profile ID, which also corresponds to a Field Vector. |
| */ |
| static int ice_free_prof_id(struct ice_hw *hw, enum ice_block blk, u8 prof_id) |
| { |
| u16 tmp_prof_id = (u16)prof_id; |
| u16 res_type; |
| |
| if (!ice_prof_id_rsrc_type(blk, &res_type)) |
| return -EINVAL; |
| |
| return ice_free_hw_res(hw, res_type, 1, &tmp_prof_id); |
| } |
| |
| /** |
| * ice_prof_inc_ref - increment reference count for profile |
| * @hw: pointer to the HW struct |
| * @blk: the block from which to free the profile ID |
| * @prof_id: the profile ID for which to increment the reference count |
| */ |
| static int ice_prof_inc_ref(struct ice_hw *hw, enum ice_block blk, u8 prof_id) |
| { |
| if (prof_id > hw->blk[blk].es.count) |
| return -EINVAL; |
| |
| hw->blk[blk].es.ref_count[prof_id]++; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_write_prof_mask_reg - write profile mask register |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @mask_idx: mask index |
| * @idx: index of the FV which will use the mask |
| * @mask: the 16-bit mask |
| */ |
| static void |
| ice_write_prof_mask_reg(struct ice_hw *hw, enum ice_block blk, u16 mask_idx, |
| u16 idx, u16 mask) |
| { |
| u32 offset; |
| u32 val; |
| |
| switch (blk) { |
| case ICE_BLK_RSS: |
| offset = GLQF_HMASK(mask_idx); |
| val = FIELD_PREP(GLQF_HMASK_MSK_INDEX_M, idx); |
| val |= FIELD_PREP(GLQF_HMASK_MASK_M, mask); |
| break; |
| case ICE_BLK_FD: |
| offset = GLQF_FDMASK(mask_idx); |
| val = FIELD_PREP(GLQF_FDMASK_MSK_INDEX_M, idx); |
| val |= FIELD_PREP(GLQF_FDMASK_MASK_M, mask); |
| break; |
| default: |
| ice_debug(hw, ICE_DBG_PKG, "No profile masks for block %d\n", |
| blk); |
| return; |
| } |
| |
| wr32(hw, offset, val); |
| ice_debug(hw, ICE_DBG_PKG, "write mask, blk %d (%d): %x = %x\n", |
| blk, idx, offset, val); |
| } |
| |
| /** |
| * ice_write_prof_mask_enable_res - write profile mask enable register |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @prof_id: profile ID |
| * @enable_mask: enable mask |
| */ |
| static void |
| ice_write_prof_mask_enable_res(struct ice_hw *hw, enum ice_block blk, |
| u16 prof_id, u32 enable_mask) |
| { |
| u32 offset; |
| |
| switch (blk) { |
| case ICE_BLK_RSS: |
| offset = GLQF_HMASK_SEL(prof_id); |
| break; |
| case ICE_BLK_FD: |
| offset = GLQF_FDMASK_SEL(prof_id); |
| break; |
| default: |
| ice_debug(hw, ICE_DBG_PKG, "No profile masks for block %d\n", |
| blk); |
| return; |
| } |
| |
| wr32(hw, offset, enable_mask); |
| ice_debug(hw, ICE_DBG_PKG, "write mask enable, blk %d (%d): %x = %x\n", |
| blk, prof_id, offset, enable_mask); |
| } |
| |
| /** |
| * ice_init_prof_masks - initial prof masks |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| */ |
| static void ice_init_prof_masks(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 per_pf; |
| u16 i; |
| |
| mutex_init(&hw->blk[blk].masks.lock); |
| |
| per_pf = ICE_PROF_MASK_COUNT / hw->dev_caps.num_funcs; |
| |
| hw->blk[blk].masks.count = per_pf; |
| hw->blk[blk].masks.first = hw->pf_id * per_pf; |
| |
| memset(hw->blk[blk].masks.masks, 0, sizeof(hw->blk[blk].masks.masks)); |
| |
| for (i = hw->blk[blk].masks.first; |
| i < hw->blk[blk].masks.first + hw->blk[blk].masks.count; i++) |
| ice_write_prof_mask_reg(hw, blk, i, 0, 0); |
| } |
| |
| /** |
| * ice_init_all_prof_masks - initialize all prof masks |
| * @hw: pointer to the HW struct |
| */ |
| static void ice_init_all_prof_masks(struct ice_hw *hw) |
| { |
| ice_init_prof_masks(hw, ICE_BLK_RSS); |
| ice_init_prof_masks(hw, ICE_BLK_FD); |
| } |
| |
| /** |
| * ice_alloc_prof_mask - allocate profile mask |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @idx: index of FV which will use the mask |
| * @mask: the 16-bit mask |
| * @mask_idx: variable to receive the mask index |
| */ |
| static int |
| ice_alloc_prof_mask(struct ice_hw *hw, enum ice_block blk, u16 idx, u16 mask, |
| u16 *mask_idx) |
| { |
| bool found_unused = false, found_copy = false; |
| u16 unused_idx = 0, copy_idx = 0; |
| int status = -ENOSPC; |
| u16 i; |
| |
| if (blk != ICE_BLK_RSS && blk != ICE_BLK_FD) |
| return -EINVAL; |
| |
| mutex_lock(&hw->blk[blk].masks.lock); |
| |
| for (i = hw->blk[blk].masks.first; |
| i < hw->blk[blk].masks.first + hw->blk[blk].masks.count; i++) |
| if (hw->blk[blk].masks.masks[i].in_use) { |
| /* if mask is in use and it exactly duplicates the |
| * desired mask and index, then in can be reused |
| */ |
| if (hw->blk[blk].masks.masks[i].mask == mask && |
| hw->blk[blk].masks.masks[i].idx == idx) { |
| found_copy = true; |
| copy_idx = i; |
| break; |
| } |
| } else { |
| /* save off unused index, but keep searching in case |
| * there is an exact match later on |
| */ |
| if (!found_unused) { |
| found_unused = true; |
| unused_idx = i; |
| } |
| } |
| |
| if (found_copy) |
| i = copy_idx; |
| else if (found_unused) |
| i = unused_idx; |
| else |
| goto err_ice_alloc_prof_mask; |
| |
| /* update mask for a new entry */ |
| if (found_unused) { |
| hw->blk[blk].masks.masks[i].in_use = true; |
| hw->blk[blk].masks.masks[i].mask = mask; |
| hw->blk[blk].masks.masks[i].idx = idx; |
| hw->blk[blk].masks.masks[i].ref = 0; |
| ice_write_prof_mask_reg(hw, blk, i, idx, mask); |
| } |
| |
| hw->blk[blk].masks.masks[i].ref++; |
| *mask_idx = i; |
| status = 0; |
| |
| err_ice_alloc_prof_mask: |
| mutex_unlock(&hw->blk[blk].masks.lock); |
| |
| return status; |
| } |
| |
| /** |
| * ice_free_prof_mask - free profile mask |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @mask_idx: index of mask |
| */ |
| static int |
| ice_free_prof_mask(struct ice_hw *hw, enum ice_block blk, u16 mask_idx) |
| { |
| if (blk != ICE_BLK_RSS && blk != ICE_BLK_FD) |
| return -EINVAL; |
| |
| if (!(mask_idx >= hw->blk[blk].masks.first && |
| mask_idx < hw->blk[blk].masks.first + hw->blk[blk].masks.count)) |
| return -ENOENT; |
| |
| mutex_lock(&hw->blk[blk].masks.lock); |
| |
| if (!hw->blk[blk].masks.masks[mask_idx].in_use) |
| goto exit_ice_free_prof_mask; |
| |
| if (hw->blk[blk].masks.masks[mask_idx].ref > 1) { |
| hw->blk[blk].masks.masks[mask_idx].ref--; |
| goto exit_ice_free_prof_mask; |
| } |
| |
| /* remove mask */ |
| hw->blk[blk].masks.masks[mask_idx].in_use = false; |
| hw->blk[blk].masks.masks[mask_idx].mask = 0; |
| hw->blk[blk].masks.masks[mask_idx].idx = 0; |
| |
| /* update mask as unused entry */ |
| ice_debug(hw, ICE_DBG_PKG, "Free mask, blk %d, mask %d\n", blk, |
| mask_idx); |
| ice_write_prof_mask_reg(hw, blk, mask_idx, 0, 0); |
| |
| exit_ice_free_prof_mask: |
| mutex_unlock(&hw->blk[blk].masks.lock); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_free_prof_masks - free all profile masks for a profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @prof_id: profile ID |
| */ |
| static int |
| ice_free_prof_masks(struct ice_hw *hw, enum ice_block blk, u16 prof_id) |
| { |
| u32 mask_bm; |
| u16 i; |
| |
| if (blk != ICE_BLK_RSS && blk != ICE_BLK_FD) |
| return -EINVAL; |
| |
| mask_bm = hw->blk[blk].es.mask_ena[prof_id]; |
| for (i = 0; i < BITS_PER_BYTE * sizeof(mask_bm); i++) |
| if (mask_bm & BIT(i)) |
| ice_free_prof_mask(hw, blk, i); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_shutdown_prof_masks - releases lock for masking |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * |
| * This should be called before unloading the driver |
| */ |
| static void ice_shutdown_prof_masks(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 i; |
| |
| mutex_lock(&hw->blk[blk].masks.lock); |
| |
| for (i = hw->blk[blk].masks.first; |
| i < hw->blk[blk].masks.first + hw->blk[blk].masks.count; i++) { |
| ice_write_prof_mask_reg(hw, blk, i, 0, 0); |
| |
| hw->blk[blk].masks.masks[i].in_use = false; |
| hw->blk[blk].masks.masks[i].idx = 0; |
| hw->blk[blk].masks.masks[i].mask = 0; |
| } |
| |
| mutex_unlock(&hw->blk[blk].masks.lock); |
| mutex_destroy(&hw->blk[blk].masks.lock); |
| } |
| |
| /** |
| * ice_shutdown_all_prof_masks - releases all locks for masking |
| * @hw: pointer to the HW struct |
| * |
| * This should be called before unloading the driver |
| */ |
| static void ice_shutdown_all_prof_masks(struct ice_hw *hw) |
| { |
| ice_shutdown_prof_masks(hw, ICE_BLK_RSS); |
| ice_shutdown_prof_masks(hw, ICE_BLK_FD); |
| } |
| |
| /** |
| * ice_update_prof_masking - set registers according to masking |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @prof_id: profile ID |
| * @masks: masks |
| */ |
| static int |
| ice_update_prof_masking(struct ice_hw *hw, enum ice_block blk, u16 prof_id, |
| u16 *masks) |
| { |
| bool err = false; |
| u32 ena_mask = 0; |
| u16 idx; |
| u16 i; |
| |
| /* Only support FD and RSS masking, otherwise nothing to be done */ |
| if (blk != ICE_BLK_RSS && blk != ICE_BLK_FD) |
| return 0; |
| |
| for (i = 0; i < hw->blk[blk].es.fvw; i++) |
| if (masks[i] && masks[i] != 0xFFFF) { |
| if (!ice_alloc_prof_mask(hw, blk, i, masks[i], &idx)) { |
| ena_mask |= BIT(idx); |
| } else { |
| /* not enough bitmaps */ |
| err = true; |
| break; |
| } |
| } |
| |
| if (err) { |
| /* free any bitmaps we have allocated */ |
| for (i = 0; i < BITS_PER_BYTE * sizeof(ena_mask); i++) |
| if (ena_mask & BIT(i)) |
| ice_free_prof_mask(hw, blk, i); |
| |
| return -EIO; |
| } |
| |
| /* enable the masks for this profile */ |
| ice_write_prof_mask_enable_res(hw, blk, prof_id, ena_mask); |
| |
| /* store enabled masks with profile so that they can be freed later */ |
| hw->blk[blk].es.mask_ena[prof_id] = ena_mask; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_write_es - write an extraction sequence and symmetric setting to hardware |
| * @hw: pointer to the HW struct |
| * @blk: the block in which to write the extraction sequence |
| * @prof_id: the profile ID to write |
| * @fv: pointer to the extraction sequence to write - NULL to clear extraction |
| * @symm: symmetric setting for RSS profiles |
| */ |
| static void |
| ice_write_es(struct ice_hw *hw, enum ice_block blk, u8 prof_id, |
| struct ice_fv_word *fv, bool symm) |
| { |
| u16 off; |
| |
| off = prof_id * hw->blk[blk].es.fvw; |
| if (!fv) { |
| memset(&hw->blk[blk].es.t[off], 0, |
| hw->blk[blk].es.fvw * sizeof(*fv)); |
| hw->blk[blk].es.written[prof_id] = false; |
| } else { |
| memcpy(&hw->blk[blk].es.t[off], fv, |
| hw->blk[blk].es.fvw * sizeof(*fv)); |
| } |
| |
| if (blk == ICE_BLK_RSS) |
| hw->blk[blk].es.symm[prof_id] = symm; |
| } |
| |
| /** |
| * ice_prof_dec_ref - decrement reference count for profile |
| * @hw: pointer to the HW struct |
| * @blk: the block from which to free the profile ID |
| * @prof_id: the profile ID for which to decrement the reference count |
| */ |
| static int |
| ice_prof_dec_ref(struct ice_hw *hw, enum ice_block blk, u8 prof_id) |
| { |
| if (prof_id > hw->blk[blk].es.count) |
| return -EINVAL; |
| |
| if (hw->blk[blk].es.ref_count[prof_id] > 0) { |
| if (!--hw->blk[blk].es.ref_count[prof_id]) { |
| ice_write_es(hw, blk, prof_id, NULL, false); |
| ice_free_prof_masks(hw, blk, prof_id); |
| return ice_free_prof_id(hw, blk, prof_id); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Block / table section IDs */ |
| static const u32 ice_blk_sids[ICE_BLK_COUNT][ICE_SID_OFF_COUNT] = { |
| /* SWITCH */ |
| { ICE_SID_XLT1_SW, |
| ICE_SID_XLT2_SW, |
| ICE_SID_PROFID_TCAM_SW, |
| ICE_SID_PROFID_REDIR_SW, |
| ICE_SID_FLD_VEC_SW |
| }, |
| |
| /* ACL */ |
| { ICE_SID_XLT1_ACL, |
| ICE_SID_XLT2_ACL, |
| ICE_SID_PROFID_TCAM_ACL, |
| ICE_SID_PROFID_REDIR_ACL, |
| ICE_SID_FLD_VEC_ACL |
| }, |
| |
| /* FD */ |
| { ICE_SID_XLT1_FD, |
| ICE_SID_XLT2_FD, |
| ICE_SID_PROFID_TCAM_FD, |
| ICE_SID_PROFID_REDIR_FD, |
| ICE_SID_FLD_VEC_FD |
| }, |
| |
| /* RSS */ |
| { ICE_SID_XLT1_RSS, |
| ICE_SID_XLT2_RSS, |
| ICE_SID_PROFID_TCAM_RSS, |
| ICE_SID_PROFID_REDIR_RSS, |
| ICE_SID_FLD_VEC_RSS |
| }, |
| |
| /* PE */ |
| { ICE_SID_XLT1_PE, |
| ICE_SID_XLT2_PE, |
| ICE_SID_PROFID_TCAM_PE, |
| ICE_SID_PROFID_REDIR_PE, |
| ICE_SID_FLD_VEC_PE |
| } |
| }; |
| |
| /** |
| * ice_init_sw_xlt1_db - init software XLT1 database from HW tables |
| * @hw: pointer to the hardware structure |
| * @blk: the HW block to initialize |
| */ |
| static void ice_init_sw_xlt1_db(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 pt; |
| |
| for (pt = 0; pt < hw->blk[blk].xlt1.count; pt++) { |
| u8 ptg; |
| |
| ptg = hw->blk[blk].xlt1.t[pt]; |
| if (ptg != ICE_DEFAULT_PTG) { |
| ice_ptg_alloc_val(hw, blk, ptg); |
| ice_ptg_add_mv_ptype(hw, blk, pt, ptg); |
| } |
| } |
| } |
| |
| /** |
| * ice_init_sw_xlt2_db - init software XLT2 database from HW tables |
| * @hw: pointer to the hardware structure |
| * @blk: the HW block to initialize |
| */ |
| static void ice_init_sw_xlt2_db(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 vsi; |
| |
| for (vsi = 0; vsi < hw->blk[blk].xlt2.count; vsi++) { |
| u16 vsig; |
| |
| vsig = hw->blk[blk].xlt2.t[vsi]; |
| if (vsig) { |
| ice_vsig_alloc_val(hw, blk, vsig); |
| ice_vsig_add_mv_vsi(hw, blk, vsi, vsig); |
| /* no changes at this time, since this has been |
| * initialized from the original package |
| */ |
| hw->blk[blk].xlt2.vsis[vsi].changed = 0; |
| } |
| } |
| } |
| |
| /** |
| * ice_init_sw_db - init software database from HW tables |
| * @hw: pointer to the hardware structure |
| */ |
| static void ice_init_sw_db(struct ice_hw *hw) |
| { |
| u16 i; |
| |
| for (i = 0; i < ICE_BLK_COUNT; i++) { |
| ice_init_sw_xlt1_db(hw, (enum ice_block)i); |
| ice_init_sw_xlt2_db(hw, (enum ice_block)i); |
| } |
| } |
| |
| /** |
| * ice_fill_tbl - Reads content of a single table type into database |
| * @hw: pointer to the hardware structure |
| * @block_id: Block ID of the table to copy |
| * @sid: Section ID of the table to copy |
| * |
| * Will attempt to read the entire content of a given table of a single block |
| * into the driver database. We assume that the buffer will always |
| * be as large or larger than the data contained in the package. If |
| * this condition is not met, there is most likely an error in the package |
| * contents. |
| */ |
| static void ice_fill_tbl(struct ice_hw *hw, enum ice_block block_id, u32 sid) |
| { |
| u32 dst_len, sect_len, offset = 0; |
| struct ice_prof_redir_section *pr; |
| struct ice_prof_id_section *pid; |
| struct ice_xlt1_section *xlt1; |
| struct ice_xlt2_section *xlt2; |
| struct ice_sw_fv_section *es; |
| struct ice_pkg_enum state; |
| u8 *src, *dst; |
| void *sect; |
| |
| /* if the HW segment pointer is null then the first iteration of |
| * ice_pkg_enum_section() will fail. In this case the HW tables will |
| * not be filled and return success. |
| */ |
| if (!hw->seg) { |
| ice_debug(hw, ICE_DBG_PKG, "hw->seg is NULL, tables are not filled\n"); |
| return; |
| } |
| |
| memset(&state, 0, sizeof(state)); |
| |
| sect = ice_pkg_enum_section(hw->seg, &state, sid); |
| |
| while (sect) { |
| switch (sid) { |
| case ICE_SID_XLT1_SW: |
| case ICE_SID_XLT1_FD: |
| case ICE_SID_XLT1_RSS: |
| case ICE_SID_XLT1_ACL: |
| case ICE_SID_XLT1_PE: |
| xlt1 = sect; |
| src = xlt1->value; |
| sect_len = le16_to_cpu(xlt1->count) * |
| sizeof(*hw->blk[block_id].xlt1.t); |
| dst = hw->blk[block_id].xlt1.t; |
| dst_len = hw->blk[block_id].xlt1.count * |
| sizeof(*hw->blk[block_id].xlt1.t); |
| break; |
| case ICE_SID_XLT2_SW: |
| case ICE_SID_XLT2_FD: |
| case ICE_SID_XLT2_RSS: |
| case ICE_SID_XLT2_ACL: |
| case ICE_SID_XLT2_PE: |
| xlt2 = sect; |
| src = (__force u8 *)xlt2->value; |
| sect_len = le16_to_cpu(xlt2->count) * |
| sizeof(*hw->blk[block_id].xlt2.t); |
| dst = (u8 *)hw->blk[block_id].xlt2.t; |
| dst_len = hw->blk[block_id].xlt2.count * |
| sizeof(*hw->blk[block_id].xlt2.t); |
| break; |
| case ICE_SID_PROFID_TCAM_SW: |
| case ICE_SID_PROFID_TCAM_FD: |
| case ICE_SID_PROFID_TCAM_RSS: |
| case ICE_SID_PROFID_TCAM_ACL: |
| case ICE_SID_PROFID_TCAM_PE: |
| pid = sect; |
| src = (u8 *)pid->entry; |
| sect_len = le16_to_cpu(pid->count) * |
| sizeof(*hw->blk[block_id].prof.t); |
| dst = (u8 *)hw->blk[block_id].prof.t; |
| dst_len = hw->blk[block_id].prof.count * |
| sizeof(*hw->blk[block_id].prof.t); |
| break; |
| case ICE_SID_PROFID_REDIR_SW: |
| case ICE_SID_PROFID_REDIR_FD: |
| case ICE_SID_PROFID_REDIR_RSS: |
| case ICE_SID_PROFID_REDIR_ACL: |
| case ICE_SID_PROFID_REDIR_PE: |
| pr = sect; |
| src = pr->redir_value; |
| sect_len = le16_to_cpu(pr->count) * |
| sizeof(*hw->blk[block_id].prof_redir.t); |
| dst = hw->blk[block_id].prof_redir.t; |
| dst_len = hw->blk[block_id].prof_redir.count * |
| sizeof(*hw->blk[block_id].prof_redir.t); |
| break; |
| case ICE_SID_FLD_VEC_SW: |
| case ICE_SID_FLD_VEC_FD: |
| case ICE_SID_FLD_VEC_RSS: |
| case ICE_SID_FLD_VEC_ACL: |
| case ICE_SID_FLD_VEC_PE: |
| es = sect; |
| src = (u8 *)es->fv; |
| sect_len = (u32)(le16_to_cpu(es->count) * |
| hw->blk[block_id].es.fvw) * |
| sizeof(*hw->blk[block_id].es.t); |
| dst = (u8 *)hw->blk[block_id].es.t; |
| dst_len = (u32)(hw->blk[block_id].es.count * |
| hw->blk[block_id].es.fvw) * |
| sizeof(*hw->blk[block_id].es.t); |
| break; |
| default: |
| return; |
| } |
| |
| /* if the section offset exceeds destination length, terminate |
| * table fill. |
| */ |
| if (offset > dst_len) |
| return; |
| |
| /* if the sum of section size and offset exceed destination size |
| * then we are out of bounds of the HW table size for that PF. |
| * Changing section length to fill the remaining table space |
| * of that PF. |
| */ |
| if ((offset + sect_len) > dst_len) |
| sect_len = dst_len - offset; |
| |
| memcpy(dst + offset, src, sect_len); |
| offset += sect_len; |
| sect = ice_pkg_enum_section(NULL, &state, sid); |
| } |
| } |
| |
| /** |
| * ice_fill_blk_tbls - Read package context for tables |
| * @hw: pointer to the hardware structure |
| * |
| * Reads the current package contents and populates the driver |
| * database with the data iteratively for all advanced feature |
| * blocks. Assume that the HW tables have been allocated. |
| */ |
| void ice_fill_blk_tbls(struct ice_hw *hw) |
| { |
| u8 i; |
| |
| for (i = 0; i < ICE_BLK_COUNT; i++) { |
| enum ice_block blk_id = (enum ice_block)i; |
| |
| ice_fill_tbl(hw, blk_id, hw->blk[blk_id].xlt1.sid); |
| ice_fill_tbl(hw, blk_id, hw->blk[blk_id].xlt2.sid); |
| ice_fill_tbl(hw, blk_id, hw->blk[blk_id].prof.sid); |
| ice_fill_tbl(hw, blk_id, hw->blk[blk_id].prof_redir.sid); |
| ice_fill_tbl(hw, blk_id, hw->blk[blk_id].es.sid); |
| } |
| |
| ice_init_sw_db(hw); |
| } |
| |
| /** |
| * ice_free_prof_map - free profile map |
| * @hw: pointer to the hardware structure |
| * @blk_idx: HW block index |
| */ |
| static void ice_free_prof_map(struct ice_hw *hw, u8 blk_idx) |
| { |
| struct ice_es *es = &hw->blk[blk_idx].es; |
| struct ice_prof_map *del, *tmp; |
| |
| mutex_lock(&es->prof_map_lock); |
| list_for_each_entry_safe(del, tmp, &es->prof_map, list) { |
| list_del(&del->list); |
| devm_kfree(ice_hw_to_dev(hw), del); |
| } |
| INIT_LIST_HEAD(&es->prof_map); |
| mutex_unlock(&es->prof_map_lock); |
| } |
| |
| /** |
| * ice_free_flow_profs - free flow profile entries |
| * @hw: pointer to the hardware structure |
| * @blk_idx: HW block index |
| */ |
| static void ice_free_flow_profs(struct ice_hw *hw, u8 blk_idx) |
| { |
| struct ice_flow_prof *p, *tmp; |
| |
| mutex_lock(&hw->fl_profs_locks[blk_idx]); |
| list_for_each_entry_safe(p, tmp, &hw->fl_profs[blk_idx], l_entry) { |
| struct ice_flow_entry *e, *t; |
| |
| list_for_each_entry_safe(e, t, &p->entries, l_entry) |
| ice_flow_rem_entry(hw, (enum ice_block)blk_idx, |
| ICE_FLOW_ENTRY_HNDL(e)); |
| |
| list_del(&p->l_entry); |
| |
| mutex_destroy(&p->entries_lock); |
| devm_kfree(ice_hw_to_dev(hw), p); |
| } |
| mutex_unlock(&hw->fl_profs_locks[blk_idx]); |
| |
| /* if driver is in reset and tables are being cleared |
| * re-initialize the flow profile list heads |
| */ |
| INIT_LIST_HEAD(&hw->fl_profs[blk_idx]); |
| } |
| |
| /** |
| * ice_free_vsig_tbl - free complete VSIG table entries |
| * @hw: pointer to the hardware structure |
| * @blk: the HW block on which to free the VSIG table entries |
| */ |
| static void ice_free_vsig_tbl(struct ice_hw *hw, enum ice_block blk) |
| { |
| u16 i; |
| |
| if (!hw->blk[blk].xlt2.vsig_tbl) |
| return; |
| |
| for (i = 1; i < ICE_MAX_VSIGS; i++) |
| if (hw->blk[blk].xlt2.vsig_tbl[i].in_use) |
| ice_vsig_free(hw, blk, i); |
| } |
| |
| /** |
| * ice_free_hw_tbls - free hardware table memory |
| * @hw: pointer to the hardware structure |
| */ |
| void ice_free_hw_tbls(struct ice_hw *hw) |
| { |
| struct ice_rss_cfg *r, *rt; |
| u8 i; |
| |
| for (i = 0; i < ICE_BLK_COUNT; i++) { |
| if (hw->blk[i].is_list_init) { |
| struct ice_es *es = &hw->blk[i].es; |
| |
| ice_free_prof_map(hw, i); |
| mutex_destroy(&es->prof_map_lock); |
| |
| ice_free_flow_profs(hw, i); |
| mutex_destroy(&hw->fl_profs_locks[i]); |
| |
| hw->blk[i].is_list_init = false; |
| } |
| ice_free_vsig_tbl(hw, (enum ice_block)i); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt1.ptypes); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt1.ptg_tbl); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt1.t); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt2.t); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt2.vsig_tbl); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].xlt2.vsis); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].prof.t); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].prof_redir.t); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].es.t); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].es.ref_count); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].es.symm); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].es.written); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].es.mask_ena); |
| devm_kfree(ice_hw_to_dev(hw), hw->blk[i].prof_id.id); |
| } |
| |
| list_for_each_entry_safe(r, rt, &hw->rss_list_head, l_entry) { |
| list_del(&r->l_entry); |
| devm_kfree(ice_hw_to_dev(hw), r); |
| } |
| mutex_destroy(&hw->rss_locks); |
| ice_shutdown_all_prof_masks(hw); |
| memset(hw->blk, 0, sizeof(hw->blk)); |
| } |
| |
| /** |
| * ice_init_flow_profs - init flow profile locks and list heads |
| * @hw: pointer to the hardware structure |
| * @blk_idx: HW block index |
| */ |
| static void ice_init_flow_profs(struct ice_hw *hw, u8 blk_idx) |
| { |
| mutex_init(&hw->fl_profs_locks[blk_idx]); |
| INIT_LIST_HEAD(&hw->fl_profs[blk_idx]); |
| } |
| |
| /** |
| * ice_clear_hw_tbls - clear HW tables and flow profiles |
| * @hw: pointer to the hardware structure |
| */ |
| void ice_clear_hw_tbls(struct ice_hw *hw) |
| { |
| u8 i; |
| |
| for (i = 0; i < ICE_BLK_COUNT; i++) { |
| struct ice_prof_redir *prof_redir = &hw->blk[i].prof_redir; |
| struct ice_prof_id *prof_id = &hw->blk[i].prof_id; |
| struct ice_prof_tcam *prof = &hw->blk[i].prof; |
| struct ice_xlt1 *xlt1 = &hw->blk[i].xlt1; |
| struct ice_xlt2 *xlt2 = &hw->blk[i].xlt2; |
| struct ice_es *es = &hw->blk[i].es; |
| |
| if (hw->blk[i].is_list_init) { |
| ice_free_prof_map(hw, i); |
| ice_free_flow_profs(hw, i); |
| } |
| |
| ice_free_vsig_tbl(hw, (enum ice_block)i); |
| |
| memset(xlt1->ptypes, 0, xlt1->count * sizeof(*xlt1->ptypes)); |
| memset(xlt1->ptg_tbl, 0, |
| ICE_MAX_PTGS * sizeof(*xlt1->ptg_tbl)); |
| memset(xlt1->t, 0, xlt1->count * sizeof(*xlt1->t)); |
| |
| memset(xlt2->vsis, 0, xlt2->count * sizeof(*xlt2->vsis)); |
| memset(xlt2->vsig_tbl, 0, |
| xlt2->count * sizeof(*xlt2->vsig_tbl)); |
| memset(xlt2->t, 0, xlt2->count * sizeof(*xlt2->t)); |
| |
| memset(prof->t, 0, prof->count * sizeof(*prof->t)); |
| memset(prof_redir->t, 0, |
| prof_redir->count * sizeof(*prof_redir->t)); |
| |
| memset(es->t, 0, es->count * sizeof(*es->t) * es->fvw); |
| memset(es->ref_count, 0, es->count * sizeof(*es->ref_count)); |
| memset(es->symm, 0, es->count * sizeof(*es->symm)); |
| memset(es->written, 0, es->count * sizeof(*es->written)); |
| memset(es->mask_ena, 0, es->count * sizeof(*es->mask_ena)); |
| |
| memset(prof_id->id, 0, prof_id->count * sizeof(*prof_id->id)); |
| } |
| } |
| |
| /** |
| * ice_init_hw_tbls - init hardware table memory |
| * @hw: pointer to the hardware structure |
| */ |
| int ice_init_hw_tbls(struct ice_hw *hw) |
| { |
| u8 i; |
| |
| mutex_init(&hw->rss_locks); |
| INIT_LIST_HEAD(&hw->rss_list_head); |
| ice_init_all_prof_masks(hw); |
| for (i = 0; i < ICE_BLK_COUNT; i++) { |
| struct ice_prof_redir *prof_redir = &hw->blk[i].prof_redir; |
| struct ice_prof_id *prof_id = &hw->blk[i].prof_id; |
| struct ice_prof_tcam *prof = &hw->blk[i].prof; |
| struct ice_xlt1 *xlt1 = &hw->blk[i].xlt1; |
| struct ice_xlt2 *xlt2 = &hw->blk[i].xlt2; |
| struct ice_es *es = &hw->blk[i].es; |
| u16 j; |
| |
| if (hw->blk[i].is_list_init) |
| continue; |
| |
| ice_init_flow_profs(hw, i); |
| mutex_init(&es->prof_map_lock); |
| INIT_LIST_HEAD(&es->prof_map); |
| hw->blk[i].is_list_init = true; |
| |
| hw->blk[i].overwrite = blk_sizes[i].overwrite; |
| es->reverse = blk_sizes[i].reverse; |
| |
| xlt1->sid = ice_blk_sids[i][ICE_SID_XLT1_OFF]; |
| xlt1->count = blk_sizes[i].xlt1; |
| |
| xlt1->ptypes = devm_kcalloc(ice_hw_to_dev(hw), xlt1->count, |
| sizeof(*xlt1->ptypes), GFP_KERNEL); |
| |
| if (!xlt1->ptypes) |
| goto err; |
| |
| xlt1->ptg_tbl = devm_kcalloc(ice_hw_to_dev(hw), ICE_MAX_PTGS, |
| sizeof(*xlt1->ptg_tbl), |
| GFP_KERNEL); |
| |
| if (!xlt1->ptg_tbl) |
| goto err; |
| |
| xlt1->t = devm_kcalloc(ice_hw_to_dev(hw), xlt1->count, |
| sizeof(*xlt1->t), GFP_KERNEL); |
| if (!xlt1->t) |
| goto err; |
| |
| xlt2->sid = ice_blk_sids[i][ICE_SID_XLT2_OFF]; |
| xlt2->count = blk_sizes[i].xlt2; |
| |
| xlt2->vsis = devm_kcalloc(ice_hw_to_dev(hw), xlt2->count, |
| sizeof(*xlt2->vsis), GFP_KERNEL); |
| |
| if (!xlt2->vsis) |
| goto err; |
| |
| xlt2->vsig_tbl = devm_kcalloc(ice_hw_to_dev(hw), xlt2->count, |
| sizeof(*xlt2->vsig_tbl), |
| GFP_KERNEL); |
| if (!xlt2->vsig_tbl) |
| goto err; |
| |
| for (j = 0; j < xlt2->count; j++) |
| INIT_LIST_HEAD(&xlt2->vsig_tbl[j].prop_lst); |
| |
| xlt2->t = devm_kcalloc(ice_hw_to_dev(hw), xlt2->count, |
| sizeof(*xlt2->t), GFP_KERNEL); |
| if (!xlt2->t) |
| goto err; |
| |
| prof->sid = ice_blk_sids[i][ICE_SID_PR_OFF]; |
| prof->count = blk_sizes[i].prof_tcam; |
| prof->max_prof_id = blk_sizes[i].prof_id; |
| prof->cdid_bits = blk_sizes[i].prof_cdid_bits; |
| prof->t = devm_kcalloc(ice_hw_to_dev(hw), prof->count, |
| sizeof(*prof->t), GFP_KERNEL); |
| |
| if (!prof->t) |
| goto err; |
| |
| prof_redir->sid = ice_blk_sids[i][ICE_SID_PR_REDIR_OFF]; |
| prof_redir->count = blk_sizes[i].prof_redir; |
| prof_redir->t = devm_kcalloc(ice_hw_to_dev(hw), |
| prof_redir->count, |
| sizeof(*prof_redir->t), |
| GFP_KERNEL); |
| |
| if (!prof_redir->t) |
| goto err; |
| |
| es->sid = ice_blk_sids[i][ICE_SID_ES_OFF]; |
| es->count = blk_sizes[i].es; |
| es->fvw = blk_sizes[i].fvw; |
| es->t = devm_kcalloc(ice_hw_to_dev(hw), |
| (u32)(es->count * es->fvw), |
| sizeof(*es->t), GFP_KERNEL); |
| if (!es->t) |
| goto err; |
| |
| es->ref_count = devm_kcalloc(ice_hw_to_dev(hw), es->count, |
| sizeof(*es->ref_count), |
| GFP_KERNEL); |
| if (!es->ref_count) |
| goto err; |
| |
| es->symm = devm_kcalloc(ice_hw_to_dev(hw), es->count, |
| sizeof(*es->symm), GFP_KERNEL); |
| if (!es->symm) |
| goto err; |
| |
| es->written = devm_kcalloc(ice_hw_to_dev(hw), es->count, |
| sizeof(*es->written), GFP_KERNEL); |
| if (!es->written) |
| goto err; |
| |
| es->mask_ena = devm_kcalloc(ice_hw_to_dev(hw), es->count, |
| sizeof(*es->mask_ena), GFP_KERNEL); |
| if (!es->mask_ena) |
| goto err; |
| |
| prof_id->count = blk_sizes[i].prof_id; |
| prof_id->id = devm_kcalloc(ice_hw_to_dev(hw), prof_id->count, |
| sizeof(*prof_id->id), GFP_KERNEL); |
| if (!prof_id->id) |
| goto err; |
| } |
| return 0; |
| |
| err: |
| ice_free_hw_tbls(hw); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ice_prof_gen_key - generate profile ID key |
| * @hw: pointer to the HW struct |
| * @blk: the block in which to write profile ID to |
| * @ptg: packet type group (PTG) portion of key |
| * @vsig: VSIG portion of key |
| * @cdid: CDID portion of key |
| * @flags: flag portion of key |
| * @vl_msk: valid mask |
| * @dc_msk: don't care mask |
| * @nm_msk: never match mask |
| * @key: output of profile ID key |
| */ |
| static int |
| ice_prof_gen_key(struct ice_hw *hw, enum ice_block blk, u8 ptg, u16 vsig, |
| u8 cdid, u16 flags, u8 vl_msk[ICE_TCAM_KEY_VAL_SZ], |
| u8 dc_msk[ICE_TCAM_KEY_VAL_SZ], u8 nm_msk[ICE_TCAM_KEY_VAL_SZ], |
| u8 key[ICE_TCAM_KEY_SZ]) |
| { |
| struct ice_prof_id_key inkey; |
| |
| inkey.xlt1 = ptg; |
| inkey.xlt2_cdid = cpu_to_le16(vsig); |
| inkey.flags = cpu_to_le16(flags); |
| |
| switch (hw->blk[blk].prof.cdid_bits) { |
| case 0: |
| break; |
| case 2: |
| #define ICE_CD_2_M 0xC000U |
| #define ICE_CD_2_S 14 |
| inkey.xlt2_cdid &= ~cpu_to_le16(ICE_CD_2_M); |
| inkey.xlt2_cdid |= cpu_to_le16(BIT(cdid) << ICE_CD_2_S); |
| break; |
| case 4: |
| #define ICE_CD_4_M 0xF000U |
| #define ICE_CD_4_S 12 |
| inkey.xlt2_cdid &= ~cpu_to_le16(ICE_CD_4_M); |
| inkey.xlt2_cdid |= cpu_to_le16(BIT(cdid) << ICE_CD_4_S); |
| break; |
| case 8: |
| #define ICE_CD_8_M 0xFF00U |
| #define ICE_CD_8_S 16 |
| inkey.xlt2_cdid &= ~cpu_to_le16(ICE_CD_8_M); |
| inkey.xlt2_cdid |= cpu_to_le16(BIT(cdid) << ICE_CD_8_S); |
| break; |
| default: |
| ice_debug(hw, ICE_DBG_PKG, "Error in profile config\n"); |
| break; |
| } |
| |
| return ice_set_key(key, ICE_TCAM_KEY_SZ, (u8 *)&inkey, vl_msk, dc_msk, |
| nm_msk, 0, ICE_TCAM_KEY_SZ / 2); |
| } |
| |
| /** |
| * ice_tcam_write_entry - write TCAM entry |
| * @hw: pointer to the HW struct |
| * @blk: the block in which to write profile ID to |
| * @idx: the entry index to write to |
| * @prof_id: profile ID |
| * @ptg: packet type group (PTG) portion of key |
| * @vsig: VSIG portion of key |
| * @cdid: CDID portion of key |
| * @flags: flag portion of key |
| * @vl_msk: valid mask |
| * @dc_msk: don't care mask |
| * @nm_msk: never match mask |
| */ |
| static int |
| ice_tcam_write_entry(struct ice_hw *hw, enum ice_block blk, u16 idx, |
| u8 prof_id, u8 ptg, u16 vsig, u8 cdid, u16 flags, |
| u8 vl_msk[ICE_TCAM_KEY_VAL_SZ], |
| u8 dc_msk[ICE_TCAM_KEY_VAL_SZ], |
| u8 nm_msk[ICE_TCAM_KEY_VAL_SZ]) |
| { |
| struct ice_prof_tcam_entry; |
| int status; |
| |
| status = ice_prof_gen_key(hw, blk, ptg, vsig, cdid, flags, vl_msk, |
| dc_msk, nm_msk, hw->blk[blk].prof.t[idx].key); |
| if (!status) { |
| hw->blk[blk].prof.t[idx].addr = cpu_to_le16(idx); |
| hw->blk[blk].prof.t[idx].prof_id = prof_id; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_vsig_get_ref - returns number of VSIs belong to a VSIG |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsig: VSIG to query |
| * @refs: pointer to variable to receive the reference count |
| */ |
| static int |
| ice_vsig_get_ref(struct ice_hw *hw, enum ice_block blk, u16 vsig, u16 *refs) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| struct ice_vsig_vsi *ptr; |
| |
| *refs = 0; |
| |
| if (!hw->blk[blk].xlt2.vsig_tbl[idx].in_use) |
| return -ENOENT; |
| |
| ptr = hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi; |
| while (ptr) { |
| (*refs)++; |
| ptr = ptr->next_vsi; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_has_prof_vsig - check to see if VSIG has a specific profile |
| * @hw: pointer to the hardware structure |
| * @blk: HW block |
| * @vsig: VSIG to check against |
| * @hdl: profile handle |
| */ |
| static bool |
| ice_has_prof_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsig, u64 hdl) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| struct ice_vsig_prof *ent; |
| |
| list_for_each_entry(ent, &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) |
| if (ent->profile_cookie == hdl) |
| return true; |
| |
| ice_debug(hw, ICE_DBG_INIT, "Characteristic list for VSI group %d not found.\n", |
| vsig); |
| return false; |
| } |
| |
| /** |
| * ice_prof_bld_es - build profile ID extraction sequence changes |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @bld: the update package buffer build to add to |
| * @chgs: the list of changes to make in hardware |
| */ |
| static int |
| ice_prof_bld_es(struct ice_hw *hw, enum ice_block blk, |
| struct ice_buf_build *bld, struct list_head *chgs) |
| { |
| u16 vec_size = hw->blk[blk].es.fvw * sizeof(struct ice_fv_word); |
| struct ice_chs_chg *tmp; |
| |
| list_for_each_entry(tmp, chgs, list_entry) |
| if (tmp->type == ICE_PTG_ES_ADD && tmp->add_prof) { |
| u16 off = tmp->prof_id * hw->blk[blk].es.fvw; |
| struct ice_pkg_es *p; |
| u32 id; |
| |
| id = ice_sect_id(blk, ICE_VEC_TBL); |
| p = ice_pkg_buf_alloc_section(bld, id, |
| struct_size(p, es, 1) + |
| vec_size - |
| sizeof(p->es[0])); |
| |
| if (!p) |
| return -ENOSPC; |
| |
| p->count = cpu_to_le16(1); |
| p->offset = cpu_to_le16(tmp->prof_id); |
| |
| memcpy(p->es, &hw->blk[blk].es.t[off], vec_size); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_prof_bld_tcam - build profile ID TCAM changes |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @bld: the update package buffer build to add to |
| * @chgs: the list of changes to make in hardware |
| */ |
| static int |
| ice_prof_bld_tcam(struct ice_hw *hw, enum ice_block blk, |
| struct ice_buf_build *bld, struct list_head *chgs) |
| { |
| struct ice_chs_chg *tmp; |
| |
| list_for_each_entry(tmp, chgs, list_entry) |
| if (tmp->type == ICE_TCAM_ADD && tmp->add_tcam_idx) { |
| struct ice_prof_id_section *p; |
| u32 id; |
| |
| id = ice_sect_id(blk, ICE_PROF_TCAM); |
| p = ice_pkg_buf_alloc_section(bld, id, |
| struct_size(p, entry, 1)); |
| |
| if (!p) |
| return -ENOSPC; |
| |
| p->count = cpu_to_le16(1); |
| p->entry[0].addr = cpu_to_le16(tmp->tcam_idx); |
| p->entry[0].prof_id = tmp->prof_id; |
| |
| memcpy(p->entry[0].key, |
| &hw->blk[blk].prof.t[tmp->tcam_idx].key, |
| sizeof(hw->blk[blk].prof.t->key)); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_prof_bld_xlt1 - build XLT1 changes |
| * @blk: hardware block |
| * @bld: the update package buffer build to add to |
| * @chgs: the list of changes to make in hardware |
| */ |
| static int |
| ice_prof_bld_xlt1(enum ice_block blk, struct ice_buf_build *bld, |
| struct list_head *chgs) |
| { |
| struct ice_chs_chg *tmp; |
| |
| list_for_each_entry(tmp, chgs, list_entry) |
| if (tmp->type == ICE_PTG_ES_ADD && tmp->add_ptg) { |
| struct ice_xlt1_section *p; |
| u32 id; |
| |
| id = ice_sect_id(blk, ICE_XLT1); |
| p = ice_pkg_buf_alloc_section(bld, id, |
| struct_size(p, value, 1)); |
| |
| if (!p) |
| return -ENOSPC; |
| |
| p->count = cpu_to_le16(1); |
| p->offset = cpu_to_le16(tmp->ptype); |
| p->value[0] = tmp->ptg; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_prof_bld_xlt2 - build XLT2 changes |
| * @blk: hardware block |
| * @bld: the update package buffer build to add to |
| * @chgs: the list of changes to make in hardware |
| */ |
| static int |
| ice_prof_bld_xlt2(enum ice_block blk, struct ice_buf_build *bld, |
| struct list_head *chgs) |
| { |
| struct ice_chs_chg *tmp; |
| |
| list_for_each_entry(tmp, chgs, list_entry) { |
| struct ice_xlt2_section *p; |
| u32 id; |
| |
| switch (tmp->type) { |
| case ICE_VSIG_ADD: |
| case ICE_VSI_MOVE: |
| case ICE_VSIG_REM: |
| id = ice_sect_id(blk, ICE_XLT2); |
| p = ice_pkg_buf_alloc_section(bld, id, |
| struct_size(p, value, 1)); |
| |
| if (!p) |
| return -ENOSPC; |
| |
| p->count = cpu_to_le16(1); |
| p->offset = cpu_to_le16(tmp->vsi); |
| p->value[0] = cpu_to_le16(tmp->vsig); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_upd_prof_hw - update hardware using the change list |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @chgs: the list of changes to make in hardware |
| */ |
| static int |
| ice_upd_prof_hw(struct ice_hw *hw, enum ice_block blk, |
| struct list_head *chgs) |
| { |
| struct ice_buf_build *b; |
| struct ice_chs_chg *tmp; |
| u16 pkg_sects; |
| u16 xlt1 = 0; |
| u16 xlt2 = 0; |
| u16 tcam = 0; |
| u16 es = 0; |
| int status; |
| u16 sects; |
| |
| /* count number of sections we need */ |
| list_for_each_entry(tmp, chgs, list_entry) { |
| switch (tmp->type) { |
| case ICE_PTG_ES_ADD: |
| if (tmp->add_ptg) |
| xlt1++; |
| if (tmp->add_prof) |
| es++; |
| break; |
| case ICE_TCAM_ADD: |
| tcam++; |
| break; |
| case ICE_VSIG_ADD: |
| case ICE_VSI_MOVE: |
| case ICE_VSIG_REM: |
| xlt2++; |
| break; |
| default: |
| break; |
| } |
| } |
| sects = xlt1 + xlt2 + tcam + es; |
| |
| if (!sects) |
| return 0; |
| |
| /* Build update package buffer */ |
| b = ice_pkg_buf_alloc(hw); |
| if (!b) |
| return -ENOMEM; |
| |
| status = ice_pkg_buf_reserve_section(b, sects); |
| if (status) |
| goto error_tmp; |
| |
| /* Preserve order of table update: ES, TCAM, PTG, VSIG */ |
| if (es) { |
| status = ice_prof_bld_es(hw, blk, b, chgs); |
| if (status) |
| goto error_tmp; |
| } |
| |
| if (tcam) { |
| status = ice_prof_bld_tcam(hw, blk, b, chgs); |
| if (status) |
| goto error_tmp; |
| } |
| |
| if (xlt1) { |
| status = ice_prof_bld_xlt1(blk, b, chgs); |
| if (status) |
| goto error_tmp; |
| } |
| |
| if (xlt2) { |
| status = ice_prof_bld_xlt2(blk, b, chgs); |
| if (status) |
| goto error_tmp; |
| } |
| |
| /* After package buffer build check if the section count in buffer is |
| * non-zero and matches the number of sections detected for package |
| * update. |
| */ |
| pkg_sects = ice_pkg_buf_get_active_sections(b); |
| if (!pkg_sects || pkg_sects != sects) { |
| status = -EINVAL; |
| goto error_tmp; |
| } |
| |
| /* update package */ |
| status = ice_update_pkg(hw, ice_pkg_buf(b), 1); |
| if (status == -EIO) |
| ice_debug(hw, ICE_DBG_INIT, "Unable to update HW profile\n"); |
| |
| error_tmp: |
| ice_pkg_buf_free(hw, b); |
| return status; |
| } |
| |
| /** |
| * ice_update_fd_mask - set Flow Director Field Vector mask for a profile |
| * @hw: pointer to the HW struct |
| * @prof_id: profile ID |
| * @mask_sel: mask select |
| * |
| * This function enable any of the masks selected by the mask select parameter |
| * for the profile specified. |
| */ |
| static void ice_update_fd_mask(struct ice_hw *hw, u16 prof_id, u32 mask_sel) |
| { |
| wr32(hw, GLQF_FDMASK_SEL(prof_id), mask_sel); |
| |
| ice_debug(hw, ICE_DBG_INIT, "fd mask(%d): %x = %x\n", prof_id, |
| GLQF_FDMASK_SEL(prof_id), mask_sel); |
| } |
| |
| struct ice_fd_src_dst_pair { |
| u8 prot_id; |
| u8 count; |
| u16 off; |
| }; |
| |
| static const struct ice_fd_src_dst_pair ice_fd_pairs[] = { |
| /* These are defined in pairs */ |
| { ICE_PROT_IPV4_OF_OR_S, 2, 12 }, |
| { ICE_PROT_IPV4_OF_OR_S, 2, 16 }, |
| |
| { ICE_PROT_IPV4_IL, 2, 12 }, |
| { ICE_PROT_IPV4_IL, 2, 16 }, |
| |
| { ICE_PROT_IPV6_OF_OR_S, 8, 8 }, |
| { ICE_PROT_IPV6_OF_OR_S, 8, 24 }, |
| |
| { ICE_PROT_IPV6_IL, 8, 8 }, |
| { ICE_PROT_IPV6_IL, 8, 24 }, |
| |
| { ICE_PROT_TCP_IL, 1, 0 }, |
| { ICE_PROT_TCP_IL, 1, 2 }, |
| |
| { ICE_PROT_UDP_OF, 1, 0 }, |
| { ICE_PROT_UDP_OF, 1, 2 }, |
| |
| { ICE_PROT_UDP_IL_OR_S, 1, 0 }, |
| { ICE_PROT_UDP_IL_OR_S, 1, 2 }, |
| |
| { ICE_PROT_SCTP_IL, 1, 0 }, |
| { ICE_PROT_SCTP_IL, 1, 2 } |
| }; |
| |
| #define ICE_FD_SRC_DST_PAIR_COUNT ARRAY_SIZE(ice_fd_pairs) |
| |
| /** |
| * ice_update_fd_swap - set register appropriately for a FD FV extraction |
| * @hw: pointer to the HW struct |
| * @prof_id: profile ID |
| * @es: extraction sequence (length of array is determined by the block) |
| */ |
| static int |
| ice_update_fd_swap(struct ice_hw *hw, u16 prof_id, struct ice_fv_word *es) |
| { |
| DECLARE_BITMAP(pair_list, ICE_FD_SRC_DST_PAIR_COUNT); |
| u8 pair_start[ICE_FD_SRC_DST_PAIR_COUNT] = { 0 }; |
| #define ICE_FD_FV_NOT_FOUND (-2) |
| s8 first_free = ICE_FD_FV_NOT_FOUND; |
| u8 used[ICE_MAX_FV_WORDS] = { 0 }; |
| s8 orig_free, si; |
| u32 mask_sel = 0; |
| u8 i, j, k; |
| |
| bitmap_zero(pair_list, ICE_FD_SRC_DST_PAIR_COUNT); |
| |
| /* This code assumes that the Flow Director field vectors are assigned |
| * from the end of the FV indexes working towards the zero index, that |
| * only complete fields will be included and will be consecutive, and |
| * that there are no gaps between valid indexes. |
| */ |
| |
| /* Determine swap fields present */ |
| for (i = 0; i < hw->blk[ICE_BLK_FD].es.fvw; i++) { |
| /* Find the first free entry, assuming right to left population. |
| * This is where we can start adding additional pairs if needed. |
| */ |
| if (first_free == ICE_FD_FV_NOT_FOUND && es[i].prot_id != |
| ICE_PROT_INVALID) |
| first_free = i - 1; |
| |
| for (j = 0; j < ICE_FD_SRC_DST_PAIR_COUNT; j++) |
| if (es[i].prot_id == ice_fd_pairs[j].prot_id && |
| es[i].off == ice_fd_pairs[j].off) { |
| __set_bit(j, pair_list); |
| pair_start[j] = i; |
| } |
| } |
| |
| orig_free = first_free; |
| |
| /* determine missing swap fields that need to be added */ |
| for (i = 0; i < ICE_FD_SRC_DST_PAIR_COUNT; i += 2) { |
| u8 bit1 = test_bit(i + 1, pair_list); |
| u8 bit0 = test_bit(i, pair_list); |
| |
| if (bit0 ^ bit1) { |
| u8 index; |
| |
| /* add the appropriate 'paired' entry */ |
| if (!bit0) |
| index = i; |
| else |
| index = i + 1; |
| |
| /* check for room */ |
| if (first_free + 1 < (s8)ice_fd_pairs[index].count) |
| return -ENOSPC; |
| |
| /* place in extraction sequence */ |
| for (k = 0; k < ice_fd_pairs[index].count; k++) { |
| es[first_free - k].prot_id = |
| ice_fd_pairs[index].prot_id; |
| es[first_free - k].off = |
| ice_fd_pairs[index].off + (k * 2); |
| |
| if (k > first_free) |
| return -EIO; |
| |
| /* keep track of non-relevant fields */ |
| mask_sel |= BIT(first_free - k); |
| } |
| |
| pair_start[index] = first_free; |
| first_free -= ice_fd_pairs[index].count; |
| } |
| } |
| |
| /* fill in the swap array */ |
| si = hw->blk[ICE_BLK_FD].es.fvw - 1; |
| while (si >= 0) { |
| u8 indexes_used = 1; |
| |
| /* assume flat at this index */ |
| #define ICE_SWAP_VALID 0x80 |
| used[si] = si | ICE_SWAP_VALID; |
| |
| if (orig_free == ICE_FD_FV_NOT_FOUND || si <= orig_free) { |
| si -= indexes_used; |
| continue; |
| } |
| |
| /* check for a swap location */ |
| for (j = 0; j < ICE_FD_SRC_DST_PAIR_COUNT; j++) |
| if (es[si].prot_id == ice_fd_pairs[j].prot_id && |
| es[si].off == ice_fd_pairs[j].off) { |
| u8 idx; |
| |
| /* determine the appropriate matching field */ |
| idx = j + ((j % 2) ? -1 : 1); |
| |
| indexes_used = ice_fd_pairs[idx].count; |
| for (k = 0; k < indexes_used; k++) { |
| used[si - k] = (pair_start[idx] - k) | |
| ICE_SWAP_VALID; |
| } |
| |
| break; |
| } |
| |
| si -= indexes_used; |
| } |
| |
| /* for each set of 4 swap and 4 inset indexes, write the appropriate |
| * register |
| */ |
| for (j = 0; j < hw->blk[ICE_BLK_FD].es.fvw / 4; j++) { |
| u32 raw_swap = 0; |
| u32 raw_in = 0; |
| |
| for (k = 0; k < 4; k++) { |
| u8 idx; |
| |
| idx = (j * 4) + k; |
| if (used[idx] && !(mask_sel & BIT(idx))) { |
| raw_swap |= used[idx] << (k * BITS_PER_BYTE); |
| #define ICE_INSET_DFLT 0x9f |
| raw_in |= ICE_INSET_DFLT << (k * BITS_PER_BYTE); |
| } |
| } |
| |
| /* write the appropriate swap register set */ |
| wr32(hw, GLQF_FDSWAP(prof_id, j), raw_swap); |
| |
| ice_debug(hw, ICE_DBG_INIT, "swap wr(%d, %d): %x = %08x\n", |
| prof_id, j, GLQF_FDSWAP(prof_id, j), raw_swap); |
| |
| /* write the appropriate inset register set */ |
| wr32(hw, GLQF_FDINSET(prof_id, j), raw_in); |
| |
| ice_debug(hw, ICE_DBG_INIT, "inset wr(%d, %d): %x = %08x\n", |
| prof_id, j, GLQF_FDINSET(prof_id, j), raw_in); |
| } |
| |
| /* initially clear the mask select for this profile */ |
| ice_update_fd_mask(hw, prof_id, 0); |
| |
| return 0; |
| } |
| |
| /* The entries here needs to match the order of enum ice_ptype_attrib */ |
| static const struct ice_ptype_attrib_info ice_ptype_attributes[] = { |
| { ICE_GTP_PDU_EH, ICE_GTP_PDU_FLAG_MASK }, |
| { ICE_GTP_SESSION, ICE_GTP_FLAGS_MASK }, |
| { ICE_GTP_DOWNLINK, ICE_GTP_FLAGS_MASK }, |
| { ICE_GTP_UPLINK, ICE_GTP_FLAGS_MASK }, |
| }; |
| |
| /** |
| * ice_get_ptype_attrib_info - get PTYPE attribute information |
| * @type: attribute type |
| * @info: pointer to variable to the attribute information |
| */ |
| static void |
| ice_get_ptype_attrib_info(enum ice_ptype_attrib_type type, |
| struct ice_ptype_attrib_info *info) |
| { |
| *info = ice_ptype_attributes[type]; |
| } |
| |
| /** |
| * ice_add_prof_attrib - add any PTG with attributes to profile |
| * @prof: pointer to the profile to which PTG entries will be added |
| * @ptg: PTG to be added |
| * @ptype: PTYPE that needs to be looked up |
| * @attr: array of attributes that will be considered |
| * @attr_cnt: number of elements in the attribute array |
| */ |
| static int |
| ice_add_prof_attrib(struct ice_prof_map *prof, u8 ptg, u16 ptype, |
| const struct ice_ptype_attributes *attr, u16 attr_cnt) |
| { |
| bool found = false; |
| u16 i; |
| |
| for (i = 0; i < attr_cnt; i++) |
| if (attr[i].ptype == ptype) { |
| found = true; |
| |
| prof->ptg[prof->ptg_cnt] = ptg; |
| ice_get_ptype_attrib_info(attr[i].attrib, |
| &prof->attr[prof->ptg_cnt]); |
| |
| if (++prof->ptg_cnt >= ICE_MAX_PTG_PER_PROFILE) |
| return -ENOSPC; |
| } |
| |
| if (!found) |
| return -ENOENT; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_prof - add profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @id: profile tracking ID |
| * @ptypes: array of bitmaps indicating ptypes (ICE_FLOW_PTYPE_MAX bits) |
| * @attr: array of attributes |
| * @attr_cnt: number of elements in attr array |
| * @es: extraction sequence (length of array is determined by the block) |
| * @masks: mask for extraction sequence |
| * @symm: symmetric setting for RSS profiles |
| * |
| * This function registers a profile, which matches a set of PTYPES with a |
| * particular extraction sequence. While the hardware profile is allocated |
| * it will not be written until the first call to ice_add_flow that specifies |
| * the ID value used here. |
| */ |
| int |
| ice_add_prof(struct ice_hw *hw, enum ice_block blk, u64 id, u8 ptypes[], |
| const struct ice_ptype_attributes *attr, u16 attr_cnt, |
| struct ice_fv_word *es, u16 *masks, bool symm) |
| { |
| u32 bytes = DIV_ROUND_UP(ICE_FLOW_PTYPE_MAX, BITS_PER_BYTE); |
| DECLARE_BITMAP(ptgs_used, ICE_XLT1_CNT); |
| struct ice_prof_map *prof; |
| u8 byte = 0; |
| u8 prof_id; |
| int status; |
| |
| bitmap_zero(ptgs_used, ICE_XLT1_CNT); |
| |
| mutex_lock(&hw->blk[blk].es.prof_map_lock); |
| |
| /* search for existing profile */ |
| status = ice_find_prof_id_with_mask(hw, blk, es, masks, symm, &prof_id); |
| if (status) { |
| /* allocate profile ID */ |
| status = ice_alloc_prof_id(hw, blk, &prof_id); |
| if (status) |
| goto err_ice_add_prof; |
| if (blk == ICE_BLK_FD) { |
| /* For Flow Director block, the extraction sequence may |
| * need to be altered in the case where there are paired |
| * fields that have no match. This is necessary because |
| * for Flow Director, src and dest fields need to paired |
| * for filter programming and these values are swapped |
| * during Tx. |
| */ |
| status = ice_update_fd_swap(hw, prof_id, es); |
| if (status) |
| goto err_ice_add_prof; |
| } |
| status = ice_update_prof_masking(hw, blk, prof_id, masks); |
| if (status) |
| goto err_ice_add_prof; |
| |
| /* and write new es */ |
| ice_write_es(hw, blk, prof_id, es, symm); |
| } |
| |
| ice_prof_inc_ref(hw, blk, prof_id); |
| |
| /* add profile info */ |
| prof = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*prof), GFP_KERNEL); |
| if (!prof) { |
| status = -ENOMEM; |
| goto err_ice_add_prof; |
| } |
| |
| prof->profile_cookie = id; |
| prof->prof_id = prof_id; |
| prof->ptg_cnt = 0; |
| prof->context = 0; |
| |
| /* build list of ptgs */ |
| while (bytes && prof->ptg_cnt < ICE_MAX_PTG_PER_PROFILE) { |
| u8 bit; |
| |
| if (!ptypes[byte]) { |
| bytes--; |
| byte++; |
| continue; |
| } |
| |
| /* Examine 8 bits per byte */ |
| for_each_set_bit(bit, (unsigned long *)&ptypes[byte], |
| BITS_PER_BYTE) { |
| u16 ptype; |
| u8 ptg; |
| |
| ptype = byte * BITS_PER_BYTE + bit; |
| |
| /* The package should place all ptypes in a non-zero |
| * PTG, so the following call should never fail. |
| */ |
| if (ice_ptg_find_ptype(hw, blk, ptype, &ptg)) |
| continue; |
| |
| /* If PTG is already added, skip and continue */ |
| if (test_bit(ptg, ptgs_used)) |
| continue; |
| |
| __set_bit(ptg, ptgs_used); |
| /* Check to see there are any attributes for |
| * this PTYPE, and add them if found. |
| */ |
| status = ice_add_prof_attrib(prof, ptg, ptype, |
| attr, attr_cnt); |
| if (status == -ENOSPC) |
| break; |
| if (status) { |
| /* This is simple a PTYPE/PTG with no |
| * attribute |
| */ |
| prof->ptg[prof->ptg_cnt] = ptg; |
| prof->attr[prof->ptg_cnt].flags = 0; |
| prof->attr[prof->ptg_cnt].mask = 0; |
| |
| if (++prof->ptg_cnt >= |
| ICE_MAX_PTG_PER_PROFILE) |
| break; |
| } |
| } |
| |
| bytes--; |
| byte++; |
| } |
| |
| list_add(&prof->list, &hw->blk[blk].es.prof_map); |
| status = 0; |
| |
| err_ice_add_prof: |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| return status; |
| } |
| |
| /** |
| * ice_search_prof_id - Search for a profile tracking ID |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @id: profile tracking ID |
| * |
| * This will search for a profile tracking ID which was previously added. |
| * The profile map lock should be held before calling this function. |
| */ |
| struct ice_prof_map * |
| ice_search_prof_id(struct ice_hw *hw, enum ice_block blk, u64 id) |
| { |
| struct ice_prof_map *entry = NULL; |
| struct ice_prof_map *map; |
| |
| list_for_each_entry(map, &hw->blk[blk].es.prof_map, list) |
| if (map->profile_cookie == id) { |
| entry = map; |
| break; |
| } |
| |
| return entry; |
| } |
| |
| /** |
| * ice_vsig_prof_id_count - count profiles in a VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: VSIG to remove the profile from |
| */ |
| static u16 |
| ice_vsig_prof_id_count(struct ice_hw *hw, enum ice_block blk, u16 vsig) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M, count = 0; |
| struct ice_vsig_prof *p; |
| |
| list_for_each_entry(p, &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) |
| count++; |
| |
| return count; |
| } |
| |
| /** |
| * ice_rel_tcam_idx - release a TCAM index |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @idx: the index to release |
| */ |
| static int ice_rel_tcam_idx(struct ice_hw *hw, enum ice_block blk, u16 idx) |
| { |
| /* Masks to invoke a never match entry */ |
| u8 vl_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| u8 dc_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFE, 0xFF, 0xFF, 0xFF, 0xFF }; |
| u8 nm_msk[ICE_TCAM_KEY_VAL_SZ] = { 0x01, 0x00, 0x00, 0x00, 0x00 }; |
| int status; |
| |
| /* write the TCAM entry */ |
| status = ice_tcam_write_entry(hw, blk, idx, 0, 0, 0, 0, 0, vl_msk, |
| dc_msk, nm_msk); |
| if (status) |
| return status; |
| |
| /* release the TCAM entry */ |
| status = ice_free_tcam_ent(hw, blk, idx); |
| |
| return status; |
| } |
| |
| /** |
| * ice_rem_prof_id - remove one profile from a VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @prof: pointer to profile structure to remove |
| */ |
| static int |
| ice_rem_prof_id(struct ice_hw *hw, enum ice_block blk, |
| struct ice_vsig_prof *prof) |
| { |
| int status; |
| u16 i; |
| |
| for (i = 0; i < prof->tcam_count; i++) |
| if (prof->tcam[i].in_use) { |
| prof->tcam[i].in_use = false; |
| status = ice_rel_tcam_idx(hw, blk, |
| prof->tcam[i].tcam_idx); |
| if (status) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_rem_vsig - remove VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: the VSIG to remove |
| * @chg: the change list |
| */ |
| static int |
| ice_rem_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsig, |
| struct list_head *chg) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| struct ice_vsig_vsi *vsi_cur; |
| struct ice_vsig_prof *d, *t; |
| |
| /* remove TCAM entries */ |
| list_for_each_entry_safe(d, t, |
| &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) { |
| int status; |
| |
| status = ice_rem_prof_id(hw, blk, d); |
| if (status) |
| return status; |
| |
| list_del(&d->list); |
| devm_kfree(ice_hw_to_dev(hw), d); |
| } |
| |
| /* Move all VSIS associated with this VSIG to the default VSIG */ |
| vsi_cur = hw->blk[blk].xlt2.vsig_tbl[idx].first_vsi; |
| /* If the VSIG has at least 1 VSI then iterate through the list |
| * and remove the VSIs before deleting the group. |
| */ |
| if (vsi_cur) |
| do { |
| struct ice_vsig_vsi *tmp = vsi_cur->next_vsi; |
| struct ice_chs_chg *p; |
| |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), |
| GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| |
| p->type = ICE_VSIG_REM; |
| p->orig_vsig = vsig; |
| p->vsig = ICE_DEFAULT_VSIG; |
| p->vsi = vsi_cur - hw->blk[blk].xlt2.vsis; |
| |
| list_add(&p->list_entry, chg); |
| |
| vsi_cur = tmp; |
| } while (vsi_cur); |
| |
| return ice_vsig_free(hw, blk, vsig); |
| } |
| |
| /** |
| * ice_rem_prof_id_vsig - remove a specific profile from a VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: VSIG to remove the profile from |
| * @hdl: profile handle indicating which profile to remove |
| * @chg: list to receive a record of changes |
| */ |
| static int |
| ice_rem_prof_id_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsig, u64 hdl, |
| struct list_head *chg) |
| { |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| struct ice_vsig_prof *p, *t; |
| |
| list_for_each_entry_safe(p, t, |
| &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) |
| if (p->profile_cookie == hdl) { |
| int status; |
| |
| if (ice_vsig_prof_id_count(hw, blk, vsig) == 1) |
| /* this is the last profile, remove the VSIG */ |
| return ice_rem_vsig(hw, blk, vsig, chg); |
| |
| status = ice_rem_prof_id(hw, blk, p); |
| if (!status) { |
| list_del(&p->list); |
| devm_kfree(ice_hw_to_dev(hw), p); |
| } |
| return status; |
| } |
| |
| return -ENOENT; |
| } |
| |
| /** |
| * ice_rem_flow_all - remove all flows with a particular profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @id: profile tracking ID |
| */ |
| static int ice_rem_flow_all(struct ice_hw *hw, enum ice_block blk, u64 id) |
| { |
| struct ice_chs_chg *del, *tmp; |
| struct list_head chg; |
| int status; |
| u16 i; |
| |
| INIT_LIST_HEAD(&chg); |
| |
| for (i = 1; i < ICE_MAX_VSIGS; i++) |
| if (hw->blk[blk].xlt2.vsig_tbl[i].in_use) { |
| if (ice_has_prof_vsig(hw, blk, i, id)) { |
| status = ice_rem_prof_id_vsig(hw, blk, i, id, |
| &chg); |
| if (status) |
| goto err_ice_rem_flow_all; |
| } |
| } |
| |
| status = ice_upd_prof_hw(hw, blk, &chg); |
| |
| err_ice_rem_flow_all: |
| list_for_each_entry_safe(del, tmp, &chg, list_entry) { |
| list_del(&del->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), del); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_rem_prof - remove profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @id: profile tracking ID |
| * |
| * This will remove the profile specified by the ID parameter, which was |
| * previously created through ice_add_prof. If any existing entries |
| * are associated with this profile, they will be removed as well. |
| */ |
| int ice_rem_prof(struct ice_hw *hw, enum ice_block blk, u64 id) |
| { |
| struct ice_prof_map *pmap; |
| int status; |
| |
| mutex_lock(&hw->blk[blk].es.prof_map_lock); |
| |
| pmap = ice_search_prof_id(hw, blk, id); |
| if (!pmap) { |
| status = -ENOENT; |
| goto err_ice_rem_prof; |
| } |
| |
| /* remove all flows with this profile */ |
| status = ice_rem_flow_all(hw, blk, pmap->profile_cookie); |
| if (status) |
| goto err_ice_rem_prof; |
| |
| /* dereference profile, and possibly remove */ |
| ice_prof_dec_ref(hw, blk, pmap->prof_id); |
| |
| list_del(&pmap->list); |
| devm_kfree(ice_hw_to_dev(hw), pmap); |
| |
| err_ice_rem_prof: |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| return status; |
| } |
| |
| /** |
| * ice_get_prof - get profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @hdl: profile handle |
| * @chg: change list |
| */ |
| static int |
| ice_get_prof(struct ice_hw *hw, enum ice_block blk, u64 hdl, |
| struct list_head *chg) |
| { |
| struct ice_prof_map *map; |
| struct ice_chs_chg *p; |
| int status = 0; |
| u16 i; |
| |
| mutex_lock(&hw->blk[blk].es.prof_map_lock); |
| /* Get the details on the profile specified by the handle ID */ |
| map = ice_search_prof_id(hw, blk, hdl); |
| if (!map) { |
| status = -ENOENT; |
| goto err_ice_get_prof; |
| } |
| |
| for (i = 0; i < map->ptg_cnt; i++) |
| if (!hw->blk[blk].es.written[map->prof_id]) { |
| /* add ES to change list */ |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), |
| GFP_KERNEL); |
| if (!p) { |
| status = -ENOMEM; |
| goto err_ice_get_prof; |
| } |
| |
| p->type = ICE_PTG_ES_ADD; |
| p->ptype = 0; |
| p->ptg = map->ptg[i]; |
| p->add_ptg = 0; |
| |
| p->add_prof = 1; |
| p->prof_id = map->prof_id; |
| |
| hw->blk[blk].es.written[map->prof_id] = true; |
| |
| list_add(&p->list_entry, chg); |
| } |
| |
| err_ice_get_prof: |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| /* let caller clean up the change list */ |
| return status; |
| } |
| |
| /** |
| * ice_get_profs_vsig - get a copy of the list of profiles from a VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: VSIG from which to copy the list |
| * @lst: output list |
| * |
| * This routine makes a copy of the list of profiles in the specified VSIG. |
| */ |
| static int |
| ice_get_profs_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsig, |
| struct list_head *lst) |
| { |
| struct ice_vsig_prof *ent1, *ent2; |
| u16 idx = vsig & ICE_VSIG_IDX_M; |
| |
| list_for_each_entry(ent1, &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) { |
| struct ice_vsig_prof *p; |
| |
| /* copy to the input list */ |
| p = devm_kmemdup(ice_hw_to_dev(hw), ent1, sizeof(*p), |
| GFP_KERNEL); |
| if (!p) |
| goto err_ice_get_profs_vsig; |
| |
| list_add_tail(&p->list, lst); |
| } |
| |
| return 0; |
| |
| err_ice_get_profs_vsig: |
| list_for_each_entry_safe(ent1, ent2, lst, list) { |
| list_del(&ent1->list); |
| devm_kfree(ice_hw_to_dev(hw), ent1); |
| } |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * ice_add_prof_to_lst - add profile entry to a list |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @lst: the list to be added to |
| * @hdl: profile handle of entry to add |
| */ |
| static int |
| ice_add_prof_to_lst(struct ice_hw *hw, enum ice_block blk, |
| struct list_head *lst, u64 hdl) |
| { |
| struct ice_prof_map *map; |
| struct ice_vsig_prof *p; |
| int status = 0; |
| u16 i; |
| |
| mutex_lock(&hw->blk[blk].es.prof_map_lock); |
| map = ice_search_prof_id(hw, blk, hdl); |
| if (!map) { |
| status = -ENOENT; |
| goto err_ice_add_prof_to_lst; |
| } |
| |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), GFP_KERNEL); |
| if (!p) { |
| status = -ENOMEM; |
| goto err_ice_add_prof_to_lst; |
| } |
| |
| p->profile_cookie = map->profile_cookie; |
| p->prof_id = map->prof_id; |
| p->tcam_count = map->ptg_cnt; |
| |
| for (i = 0; i < map->ptg_cnt; i++) { |
| p->tcam[i].prof_id = map->prof_id; |
| p->tcam[i].tcam_idx = ICE_INVALID_TCAM; |
| p->tcam[i].ptg = map->ptg[i]; |
| } |
| |
| list_add(&p->list, lst); |
| |
| err_ice_add_prof_to_lst: |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| return status; |
| } |
| |
| /** |
| * ice_move_vsi - move VSI to another VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsi: the VSI to move |
| * @vsig: the VSIG to move the VSI to |
| * @chg: the change list |
| */ |
| static int |
| ice_move_vsi(struct ice_hw *hw, enum ice_block blk, u16 vsi, u16 vsig, |
| struct list_head *chg) |
| { |
| struct ice_chs_chg *p; |
| u16 orig_vsig; |
| int status; |
| |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| |
| status = ice_vsig_find_vsi(hw, blk, vsi, &orig_vsig); |
| if (!status) |
| status = ice_vsig_add_mv_vsi(hw, blk, vsi, vsig); |
| |
| if (status) { |
| devm_kfree(ice_hw_to_dev(hw), p); |
| return status; |
| } |
| |
| p->type = ICE_VSI_MOVE; |
| p->vsi = vsi; |
| p->orig_vsig = orig_vsig; |
| p->vsig = vsig; |
| |
| list_add(&p->list_entry, chg); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_rem_chg_tcam_ent - remove a specific TCAM entry from change list |
| * @hw: pointer to the HW struct |
| * @idx: the index of the TCAM entry to remove |
| * @chg: the list of change structures to search |
| */ |
| static void |
| ice_rem_chg_tcam_ent(struct ice_hw *hw, u16 idx, struct list_head *chg) |
| { |
| struct ice_chs_chg *pos, *tmp; |
| |
| list_for_each_entry_safe(tmp, pos, chg, list_entry) |
| if (tmp->type == ICE_TCAM_ADD && tmp->tcam_idx == idx) { |
| list_del(&tmp->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), tmp); |
| } |
| } |
| |
| /** |
| * ice_prof_tcam_ena_dis - add enable or disable TCAM change |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @enable: true to enable, false to disable |
| * @vsig: the VSIG of the TCAM entry |
| * @tcam: pointer the TCAM info structure of the TCAM to disable |
| * @chg: the change list |
| * |
| * This function appends an enable or disable TCAM entry in the change log |
| */ |
| static int |
| ice_prof_tcam_ena_dis(struct ice_hw *hw, enum ice_block blk, bool enable, |
| u16 vsig, struct ice_tcam_inf *tcam, |
| struct list_head *chg) |
| { |
| struct ice_chs_chg *p; |
| int status; |
| |
| u8 vl_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| u8 dc_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFF, 0xFF, 0x00, 0x00, 0x00 }; |
| u8 nm_msk[ICE_TCAM_KEY_VAL_SZ] = { 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| |
| /* if disabling, free the TCAM */ |
| if (!enable) { |
| status = ice_rel_tcam_idx(hw, blk, tcam->tcam_idx); |
| |
| /* if we have already created a change for this TCAM entry, then |
| * we need to remove that entry, in order to prevent writing to |
| * a TCAM entry we no longer will have ownership of. |
| */ |
| ice_rem_chg_tcam_ent(hw, tcam->tcam_idx, chg); |
| tcam->tcam_idx = 0; |
| tcam->in_use = 0; |
| return status; |
| } |
| |
| /* for re-enabling, reallocate a TCAM */ |
| /* for entries with empty attribute masks, allocate entry from |
| * the bottom of the TCAM table; otherwise, allocate from the |
| * top of the table in order to give it higher priority |
| */ |
| status = ice_alloc_tcam_ent(hw, blk, tcam->attr.mask == 0, |
| &tcam->tcam_idx); |
| if (status) |
| return status; |
| |
| /* add TCAM to change list */ |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| |
| status = ice_tcam_write_entry(hw, blk, tcam->tcam_idx, tcam->prof_id, |
| tcam->ptg, vsig, 0, tcam->attr.flags, |
| vl_msk, dc_msk, nm_msk); |
| if (status) |
| goto err_ice_prof_tcam_ena_dis; |
| |
| tcam->in_use = 1; |
| |
| p->type = ICE_TCAM_ADD; |
| p->add_tcam_idx = true; |
| p->prof_id = tcam->prof_id; |
| p->ptg = tcam->ptg; |
| p->vsig = 0; |
| p->tcam_idx = tcam->tcam_idx; |
| |
| /* log change */ |
| list_add(&p->list_entry, chg); |
| |
| return 0; |
| |
| err_ice_prof_tcam_ena_dis: |
| devm_kfree(ice_hw_to_dev(hw), p); |
| return status; |
| } |
| |
| /** |
| * ice_adj_prof_priorities - adjust profile based on priorities |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: the VSIG for which to adjust profile priorities |
| * @chg: the change list |
| */ |
| static int |
| ice_adj_prof_priorities(struct ice_hw *hw, enum ice_block blk, u16 vsig, |
| struct list_head *chg) |
| { |
| DECLARE_BITMAP(ptgs_used, ICE_XLT1_CNT); |
| struct ice_vsig_prof *t; |
| int status; |
| u16 idx; |
| |
| bitmap_zero(ptgs_used, ICE_XLT1_CNT); |
| idx = vsig & ICE_VSIG_IDX_M; |
| |
| /* Priority is based on the order in which the profiles are added. The |
| * newest added profile has highest priority and the oldest added |
| * profile has the lowest priority. Since the profile property list for |
| * a VSIG is sorted from newest to oldest, this code traverses the list |
| * in order and enables the first of each PTG that it finds (that is not |
| * already enabled); it also disables any duplicate PTGs that it finds |
| * in the older profiles (that are currently enabled). |
| */ |
| |
| list_for_each_entry(t, &hw->blk[blk].xlt2.vsig_tbl[idx].prop_lst, |
| list) { |
| u16 i; |
| |
| for (i = 0; i < t->tcam_count; i++) { |
| /* Scan the priorities from newest to oldest. |
| * Make sure that the newest profiles take priority. |
| */ |
| if (test_bit(t->tcam[i].ptg, ptgs_used) && |
| t->tcam[i].in_use) { |
| /* need to mark this PTG as never match, as it |
| * was already in use and therefore duplicate |
| * (and lower priority) |
| */ |
| status = ice_prof_tcam_ena_dis(hw, blk, false, |
| vsig, |
| &t->tcam[i], |
| chg); |
| if (status) |
| return status; |
| } else if (!test_bit(t->tcam[i].ptg, ptgs_used) && |
| !t->tcam[i].in_use) { |
| /* need to enable this PTG, as it in not in use |
| * and not enabled (highest priority) |
| */ |
| status = ice_prof_tcam_ena_dis(hw, blk, true, |
| vsig, |
| &t->tcam[i], |
| chg); |
| if (status) |
| return status; |
| } |
| |
| /* keep track of used ptgs */ |
| __set_bit(t->tcam[i].ptg, ptgs_used); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_prof_id_vsig - add profile to VSIG |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsig: the VSIG to which this profile is to be added |
| * @hdl: the profile handle indicating the profile to add |
| * @rev: true to add entries to the end of the list |
| * @chg: the change list |
| */ |
| static int |
| ice_add_prof_id_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsig, u64 hdl, |
| bool rev, struct list_head *chg) |
| { |
| /* Masks that ignore flags */ |
| u8 vl_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| u8 dc_msk[ICE_TCAM_KEY_VAL_SZ] = { 0xFF, 0xFF, 0x00, 0x00, 0x00 }; |
| u8 nm_msk[ICE_TCAM_KEY_VAL_SZ] = { 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| struct ice_prof_map *map; |
| struct ice_vsig_prof *t; |
| struct ice_chs_chg *p; |
| u16 vsig_idx, i; |
| int status = 0; |
| |
| /* Error, if this VSIG already has this profile */ |
| if (ice_has_prof_vsig(hw, blk, vsig, hdl)) |
| return -EEXIST; |
| |
| /* new VSIG profile structure */ |
| t = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*t), GFP_KERNEL); |
| if (!t) |
| return -ENOMEM; |
| |
| mutex_lock(&hw->blk[blk].es.prof_map_lock); |
| /* Get the details on the profile specified by the handle ID */ |
| map = ice_search_prof_id(hw, blk, hdl); |
| if (!map) { |
| status = -ENOENT; |
| goto err_ice_add_prof_id_vsig; |
| } |
| |
| t->profile_cookie = map->profile_cookie; |
| t->prof_id = map->prof_id; |
| t->tcam_count = map->ptg_cnt; |
| |
| /* create TCAM entries */ |
| for (i = 0; i < map->ptg_cnt; i++) { |
| u16 tcam_idx; |
| |
| /* add TCAM to change list */ |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), GFP_KERNEL); |
| if (!p) { |
| status = -ENOMEM; |
| goto err_ice_add_prof_id_vsig; |
| } |
| |
| /* allocate the TCAM entry index */ |
| /* for entries with empty attribute masks, allocate entry from |
| * the bottom of the TCAM table; otherwise, allocate from the |
| * top of the table in order to give it higher priority |
| */ |
| status = ice_alloc_tcam_ent(hw, blk, map->attr[i].mask == 0, |
| &tcam_idx); |
| if (status) { |
| devm_kfree(ice_hw_to_dev(hw), p); |
| goto err_ice_add_prof_id_vsig; |
| } |
| |
| t->tcam[i].ptg = map->ptg[i]; |
| t->tcam[i].prof_id = map->prof_id; |
| t->tcam[i].tcam_idx = tcam_idx; |
| t->tcam[i].attr = map->attr[i]; |
| t->tcam[i].in_use = true; |
| |
| p->type = ICE_TCAM_ADD; |
| p->add_tcam_idx = true; |
| p->prof_id = t->tcam[i].prof_id; |
| p->ptg = t->tcam[i].ptg; |
| p->vsig = vsig; |
| p->tcam_idx = t->tcam[i].tcam_idx; |
| |
| /* write the TCAM entry */ |
| status = ice_tcam_write_entry(hw, blk, t->tcam[i].tcam_idx, |
| t->tcam[i].prof_id, |
| t->tcam[i].ptg, vsig, 0, 0, |
| vl_msk, dc_msk, nm_msk); |
| if (status) { |
| devm_kfree(ice_hw_to_dev(hw), p); |
| goto err_ice_add_prof_id_vsig; |
| } |
| |
| /* log change */ |
| list_add(&p->list_entry, chg); |
| } |
| |
| /* add profile to VSIG */ |
| vsig_idx = vsig & ICE_VSIG_IDX_M; |
| if (rev) |
| list_add_tail(&t->list, |
| &hw->blk[blk].xlt2.vsig_tbl[vsig_idx].prop_lst); |
| else |
| list_add(&t->list, |
| &hw->blk[blk].xlt2.vsig_tbl[vsig_idx].prop_lst); |
| |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| return status; |
| |
| err_ice_add_prof_id_vsig: |
| mutex_unlock(&hw->blk[blk].es.prof_map_lock); |
| /* let caller clean up the change list */ |
| devm_kfree(ice_hw_to_dev(hw), t); |
| return status; |
| } |
| |
| /** |
| * ice_create_prof_id_vsig - add a new VSIG with a single profile |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsi: the initial VSI that will be in VSIG |
| * @hdl: the profile handle of the profile that will be added to the VSIG |
| * @chg: the change list |
| */ |
| static int |
| ice_create_prof_id_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsi, u64 hdl, |
| struct list_head *chg) |
| { |
| struct ice_chs_chg *p; |
| u16 new_vsig; |
| int status; |
| |
| p = devm_kzalloc(ice_hw_to_dev(hw), sizeof(*p), GFP_KERNEL); |
| if (!p) |
| return -ENOMEM; |
| |
| new_vsig = ice_vsig_alloc(hw, blk); |
| if (!new_vsig) { |
| status = -EIO; |
| goto err_ice_create_prof_id_vsig; |
| } |
| |
| status = ice_move_vsi(hw, blk, vsi, new_vsig, chg); |
| if (status) |
| goto err_ice_create_prof_id_vsig; |
| |
| status = ice_add_prof_id_vsig(hw, blk, new_vsig, hdl, false, chg); |
| if (status) |
| goto err_ice_create_prof_id_vsig; |
| |
| p->type = ICE_VSIG_ADD; |
| p->vsi = vsi; |
| p->orig_vsig = ICE_DEFAULT_VSIG; |
| p->vsig = new_vsig; |
| |
| list_add(&p->list_entry, chg); |
| |
| return 0; |
| |
| err_ice_create_prof_id_vsig: |
| /* let caller clean up the change list */ |
| devm_kfree(ice_hw_to_dev(hw), p); |
| return status; |
| } |
| |
| /** |
| * ice_create_vsig_from_lst - create a new VSIG with a list of profiles |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsi: the initial VSI that will be in VSIG |
| * @lst: the list of profile that will be added to the VSIG |
| * @new_vsig: return of new VSIG |
| * @chg: the change list |
| */ |
| static int |
| ice_create_vsig_from_lst(struct ice_hw *hw, enum ice_block blk, u16 vsi, |
| struct list_head *lst, u16 *new_vsig, |
| struct list_head *chg) |
| { |
| struct ice_vsig_prof *t; |
| int status; |
| u16 vsig; |
| |
| vsig = ice_vsig_alloc(hw, blk); |
| if (!vsig) |
| return -EIO; |
| |
| status = ice_move_vsi(hw, blk, vsi, vsig, chg); |
| if (status) |
| return status; |
| |
| list_for_each_entry(t, lst, list) { |
| /* Reverse the order here since we are copying the list */ |
| status = ice_add_prof_id_vsig(hw, blk, vsig, t->profile_cookie, |
| true, chg); |
| if (status) |
| return status; |
| } |
| |
| *new_vsig = vsig; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_find_prof_vsig - find a VSIG with a specific profile handle |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @hdl: the profile handle of the profile to search for |
| * @vsig: returns the VSIG with the matching profile |
| */ |
| static bool |
| ice_find_prof_vsig(struct ice_hw *hw, enum ice_block blk, u64 hdl, u16 *vsig) |
| { |
| struct ice_vsig_prof *t; |
| struct list_head lst; |
| int status; |
| |
| INIT_LIST_HEAD(&lst); |
| |
| t = kzalloc(sizeof(*t), GFP_KERNEL); |
| if (!t) |
| return false; |
| |
| t->profile_cookie = hdl; |
| list_add(&t->list, &lst); |
| |
| status = ice_find_dup_props_vsig(hw, blk, &lst, vsig); |
| |
| list_del(&t->list); |
| kfree(t); |
| |
| return !status; |
| } |
| |
| /** |
| * ice_add_prof_id_flow - add profile flow |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsi: the VSI to enable with the profile specified by ID |
| * @hdl: profile handle |
| * |
| * Calling this function will update the hardware tables to enable the |
| * profile indicated by the ID parameter for the VSIs specified in the VSI |
| * array. Once successfully called, the flow will be enabled. |
| */ |
| int |
| ice_add_prof_id_flow(struct ice_hw *hw, enum ice_block blk, u16 vsi, u64 hdl) |
| { |
| struct ice_vsig_prof *tmp1, *del1; |
| struct ice_chs_chg *tmp, *del; |
| struct list_head union_lst; |
| struct list_head chg; |
| int status; |
| u16 vsig; |
| |
| INIT_LIST_HEAD(&union_lst); |
| INIT_LIST_HEAD(&chg); |
| |
| /* Get profile */ |
| status = ice_get_prof(hw, blk, hdl, &chg); |
| if (status) |
| return status; |
| |
| /* determine if VSI is already part of a VSIG */ |
| status = ice_vsig_find_vsi(hw, blk, vsi, &vsig); |
| if (!status && vsig) { |
| bool only_vsi; |
| u16 or_vsig; |
| u16 ref; |
| |
| /* found in VSIG */ |
| or_vsig = vsig; |
| |
| /* make sure that there is no overlap/conflict between the new |
| * characteristics and the existing ones; we don't support that |
| * scenario |
| */ |
| if (ice_has_prof_vsig(hw, blk, vsig, hdl)) { |
| status = -EEXIST; |
| goto err_ice_add_prof_id_flow; |
| } |
| |
| /* last VSI in the VSIG? */ |
| status = ice_vsig_get_ref(hw, blk, vsig, &ref); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| only_vsi = (ref == 1); |
| |
| /* create a union of the current profiles and the one being |
| * added |
| */ |
| status = ice_get_profs_vsig(hw, blk, vsig, &union_lst); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| |
| status = ice_add_prof_to_lst(hw, blk, &union_lst, hdl); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| |
| /* search for an existing VSIG with an exact charc match */ |
| status = ice_find_dup_props_vsig(hw, blk, &union_lst, &vsig); |
| if (!status) { |
| /* move VSI to the VSIG that matches */ |
| status = ice_move_vsi(hw, blk, vsi, vsig, &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| |
| /* VSI has been moved out of or_vsig. If the or_vsig had |
| * only that VSI it is now empty and can be removed. |
| */ |
| if (only_vsi) { |
| status = ice_rem_vsig(hw, blk, or_vsig, &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| } |
| } else if (only_vsi) { |
| /* If the original VSIG only contains one VSI, then it |
| * will be the requesting VSI. In this case the VSI is |
| * not sharing entries and we can simply add the new |
| * profile to the VSIG. |
| */ |
| status = ice_add_prof_id_vsig(hw, blk, vsig, hdl, false, |
| &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| |
| /* Adjust priorities */ |
| status = ice_adj_prof_priorities(hw, blk, vsig, &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| } else { |
| /* No match, so we need a new VSIG */ |
| status = ice_create_vsig_from_lst(hw, blk, vsi, |
| &union_lst, &vsig, |
| &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| |
| /* Adjust priorities */ |
| status = ice_adj_prof_priorities(hw, blk, vsig, &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| } |
| } else { |
| /* need to find or add a VSIG */ |
| /* search for an existing VSIG with an exact charc match */ |
| if (ice_find_prof_vsig(hw, blk, hdl, &vsig)) { |
| /* found an exact match */ |
| /* add or move VSI to the VSIG that matches */ |
| status = ice_move_vsi(hw, blk, vsi, vsig, &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| } else { |
| /* we did not find an exact match */ |
| /* we need to add a VSIG */ |
| status = ice_create_prof_id_vsig(hw, blk, vsi, hdl, |
| &chg); |
| if (status) |
| goto err_ice_add_prof_id_flow; |
| } |
| } |
| |
| /* update hardware */ |
| if (!status) |
| status = ice_upd_prof_hw(hw, blk, &chg); |
| |
| err_ice_add_prof_id_flow: |
| list_for_each_entry_safe(del, tmp, &chg, list_entry) { |
| list_del(&del->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), del); |
| } |
| |
| list_for_each_entry_safe(del1, tmp1, &union_lst, list) { |
| list_del(&del1->list); |
| devm_kfree(ice_hw_to_dev(hw), del1); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * ice_rem_prof_from_list - remove a profile from list |
| * @hw: pointer to the HW struct |
| * @lst: list to remove the profile from |
| * @hdl: the profile handle indicating the profile to remove |
| */ |
| static int |
| ice_rem_prof_from_list(struct ice_hw *hw, struct list_head *lst, u64 hdl) |
| { |
| struct ice_vsig_prof *ent, *tmp; |
| |
| list_for_each_entry_safe(ent, tmp, lst, list) |
| if (ent->profile_cookie == hdl) { |
| list_del(&ent->list); |
| devm_kfree(ice_hw_to_dev(hw), ent); |
| return 0; |
| } |
| |
| return -ENOENT; |
| } |
| |
| /** |
| * ice_rem_prof_id_flow - remove flow |
| * @hw: pointer to the HW struct |
| * @blk: hardware block |
| * @vsi: the VSI from which to remove the profile specified by ID |
| * @hdl: profile tracking handle |
| * |
| * Calling this function will update the hardware tables to remove the |
| * profile indicated by the ID parameter for the VSIs specified in the VSI |
| * array. Once successfully called, the flow will be disabled. |
| */ |
| int |
| ice_rem_prof_id_flow(struct ice_hw *hw, enum ice_block blk, u16 vsi, u64 hdl) |
| { |
| struct ice_vsig_prof *tmp1, *del1; |
| struct ice_chs_chg *tmp, *del; |
| struct list_head chg, copy; |
| int status; |
| u16 vsig; |
| |
| INIT_LIST_HEAD(©); |
| INIT_LIST_HEAD(&chg); |
| |
| /* determine if VSI is already part of a VSIG */ |
| status = ice_vsig_find_vsi(hw, blk, vsi, &vsig); |
| if (!status && vsig) { |
| bool last_profile; |
| bool only_vsi; |
| u16 ref; |
| |
| /* found in VSIG */ |
| last_profile = ice_vsig_prof_id_count(hw, blk, vsig) == 1; |
| status = ice_vsig_get_ref(hw, blk, vsig, &ref); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| only_vsi = (ref == 1); |
| |
| if (only_vsi) { |
| /* If the original VSIG only contains one reference, |
| * which will be the requesting VSI, then the VSI is not |
| * sharing entries and we can simply remove the specific |
| * characteristics from the VSIG. |
| */ |
| |
| if (last_profile) { |
| /* If there are no profiles left for this VSIG, |
| * then simply remove the VSIG. |
| */ |
| status = ice_rem_vsig(hw, blk, vsig, &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| } else { |
| status = ice_rem_prof_id_vsig(hw, blk, vsig, |
| hdl, &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| |
| /* Adjust priorities */ |
| status = ice_adj_prof_priorities(hw, blk, vsig, |
| &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| } |
| |
| } else { |
| /* Make a copy of the VSIG's list of Profiles */ |
| status = ice_get_profs_vsig(hw, blk, vsig, ©); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| |
| /* Remove specified profile entry from the list */ |
| status = ice_rem_prof_from_list(hw, ©, hdl); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| |
| if (list_empty(©)) { |
| status = ice_move_vsi(hw, blk, vsi, |
| ICE_DEFAULT_VSIG, &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| |
| } else if (!ice_find_dup_props_vsig(hw, blk, ©, |
| &vsig)) { |
| /* found an exact match */ |
| /* add or move VSI to the VSIG that matches */ |
| /* Search for a VSIG with a matching profile |
| * list |
| */ |
| |
| /* Found match, move VSI to the matching VSIG */ |
| status = ice_move_vsi(hw, blk, vsi, vsig, &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| } else { |
| /* since no existing VSIG supports this |
| * characteristic pattern, we need to create a |
| * new VSIG and TCAM entries |
| */ |
| status = ice_create_vsig_from_lst(hw, blk, vsi, |
| ©, &vsig, |
| &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| |
| /* Adjust priorities */ |
| status = ice_adj_prof_priorities(hw, blk, vsig, |
| &chg); |
| if (status) |
| goto err_ice_rem_prof_id_flow; |
| } |
| } |
| } else { |
| status = -ENOENT; |
| } |
| |
| /* update hardware tables */ |
| if (!status) |
| status = ice_upd_prof_hw(hw, blk, &chg); |
| |
| err_ice_rem_prof_id_flow: |
| list_for_each_entry_safe(del, tmp, &chg, list_entry) { |
| list_del(&del->list_entry); |
| devm_kfree(ice_hw_to_dev(hw), del); |
| } |
| |
| list_for_each_entry_safe(del1, tmp1, ©, list) { |
| list_del(&del1->list); |
| devm_kfree(ice_hw_to_dev(hw), del1); |
| } |
| |
| return status; |
| } |