| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * linux/drivers/net/ethernet/ibm/ehea/ehea_ethtool.c |
| * |
| * eHEA ethernet device driver for IBM eServer System p |
| * |
| * (C) Copyright IBM Corp. 2006 |
| * |
| * Authors: |
| * Christoph Raisch <raisch@de.ibm.com> |
| * Jan-Bernd Themann <themann@de.ibm.com> |
| * Thomas Klein <tklein@de.ibm.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include "ehea.h" |
| #include "ehea_phyp.h" |
| |
| static int ehea_get_link_ksettings(struct net_device *dev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| u32 supported, advertising; |
| u32 speed; |
| int ret; |
| |
| ret = ehea_sense_port_attr(port); |
| |
| if (ret) |
| return ret; |
| |
| if (netif_carrier_ok(dev)) { |
| switch (port->port_speed) { |
| case EHEA_SPEED_10M: |
| speed = SPEED_10; |
| break; |
| case EHEA_SPEED_100M: |
| speed = SPEED_100; |
| break; |
| case EHEA_SPEED_1G: |
| speed = SPEED_1000; |
| break; |
| case EHEA_SPEED_10G: |
| speed = SPEED_10000; |
| break; |
| default: |
| speed = -1; |
| break; /* BUG */ |
| } |
| cmd->base.duplex = port->full_duplex == 1 ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| } else { |
| speed = SPEED_UNKNOWN; |
| cmd->base.duplex = DUPLEX_UNKNOWN; |
| } |
| cmd->base.speed = speed; |
| |
| if (cmd->base.speed == SPEED_10000) { |
| supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); |
| advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); |
| cmd->base.port = PORT_FIBRE; |
| } else { |
| supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full |
| | SUPPORTED_100baseT_Half | SUPPORTED_10baseT_Full |
| | SUPPORTED_10baseT_Half | SUPPORTED_Autoneg |
| | SUPPORTED_TP); |
| advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg |
| | ADVERTISED_TP); |
| cmd->base.port = PORT_TP; |
| } |
| |
| cmd->base.autoneg = port->autoneg == 1 ? |
| AUTONEG_ENABLE : AUTONEG_DISABLE; |
| |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, |
| supported); |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, |
| advertising); |
| |
| return 0; |
| } |
| |
| static int ehea_set_link_ksettings(struct net_device *dev, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret = 0; |
| u32 sp; |
| |
| if (cmd->base.autoneg == AUTONEG_ENABLE) { |
| sp = EHEA_SPEED_AUTONEG; |
| goto doit; |
| } |
| |
| switch (cmd->base.speed) { |
| case SPEED_10: |
| if (cmd->base.duplex == DUPLEX_FULL) |
| sp = H_SPEED_10M_F; |
| else |
| sp = H_SPEED_10M_H; |
| break; |
| |
| case SPEED_100: |
| if (cmd->base.duplex == DUPLEX_FULL) |
| sp = H_SPEED_100M_F; |
| else |
| sp = H_SPEED_100M_H; |
| break; |
| |
| case SPEED_1000: |
| if (cmd->base.duplex == DUPLEX_FULL) |
| sp = H_SPEED_1G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| case SPEED_10000: |
| if (cmd->base.duplex == DUPLEX_FULL) |
| sp = H_SPEED_10G_F; |
| else |
| ret = -EINVAL; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret) |
| goto out; |
| doit: |
| ret = ehea_set_portspeed(port, sp); |
| |
| if (!ret) |
| netdev_info(dev, |
| "Port speed successfully set: %dMbps %s Duplex\n", |
| port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| out: |
| return ret; |
| } |
| |
| static int ehea_nway_reset(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); |
| |
| if (!ret) |
| netdev_info(port->netdev, |
| "Port speed successfully set: %dMbps %s Duplex\n", |
| port->port_speed, |
| port->full_duplex == 1 ? "Full" : "Half"); |
| return ret; |
| } |
| |
| static void ehea_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strscpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| strscpy(info->version, DRV_VERSION, sizeof(info->version)); |
| } |
| |
| static u32 ehea_get_msglevel(struct net_device *dev) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| return port->msg_enable; |
| } |
| |
| static void ehea_set_msglevel(struct net_device *dev, u32 value) |
| { |
| struct ehea_port *port = netdev_priv(dev); |
| port->msg_enable = value; |
| } |
| |
| static const char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = { |
| {"sig_comp_iv"}, |
| {"swqe_refill_th"}, |
| {"port resets"}, |
| {"Receive errors"}, |
| {"TCP cksum errors"}, |
| {"IP cksum errors"}, |
| {"Frame cksum errors"}, |
| {"num SQ stopped"}, |
| {"PR0 free_swqes"}, |
| {"PR1 free_swqes"}, |
| {"PR2 free_swqes"}, |
| {"PR3 free_swqes"}, |
| {"PR4 free_swqes"}, |
| {"PR5 free_swqes"}, |
| {"PR6 free_swqes"}, |
| {"PR7 free_swqes"}, |
| {"PR8 free_swqes"}, |
| {"PR9 free_swqes"}, |
| {"PR10 free_swqes"}, |
| {"PR11 free_swqes"}, |
| {"PR12 free_swqes"}, |
| {"PR13 free_swqes"}, |
| {"PR14 free_swqes"}, |
| {"PR15 free_swqes"}, |
| }; |
| |
| static void ehea_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) { |
| memcpy(data, &ehea_ethtool_stats_keys, |
| sizeof(ehea_ethtool_stats_keys)); |
| } |
| } |
| |
| static int ehea_get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(ehea_ethtool_stats_keys); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static void ehea_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| int i, k, tmp; |
| struct ehea_port *port = netdev_priv(dev); |
| |
| for (i = 0; i < ehea_get_sset_count(dev, ETH_SS_STATS); i++) |
| data[i] = 0; |
| i = 0; |
| |
| data[i++] = port->sig_comp_iv; |
| data[i++] = port->port_res[0].swqe_refill_th; |
| data[i++] = port->resets; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.poll_receive_errors; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_tcp_cksum; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_ip_cksum; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.err_frame_crc; |
| data[i++] = tmp; |
| |
| for (k = 0, tmp = 0; k < EHEA_MAX_PORT_RES; k++) |
| tmp += port->port_res[k].p_stats.queue_stopped; |
| data[i++] = tmp; |
| |
| for (k = 0; k < 16; k++) |
| data[i++] = atomic_read(&port->port_res[k].swqe_avail); |
| } |
| |
| static const struct ethtool_ops ehea_ethtool_ops = { |
| .get_drvinfo = ehea_get_drvinfo, |
| .get_msglevel = ehea_get_msglevel, |
| .set_msglevel = ehea_set_msglevel, |
| .get_link = ethtool_op_get_link, |
| .get_strings = ehea_get_strings, |
| .get_sset_count = ehea_get_sset_count, |
| .get_ethtool_stats = ehea_get_ethtool_stats, |
| .nway_reset = ehea_nway_reset, /* Restart autonegotiation */ |
| .get_link_ksettings = ehea_get_link_ksettings, |
| .set_link_ksettings = ehea_set_link_ksettings, |
| }; |
| |
| void ehea_set_ethtool_ops(struct net_device *netdev) |
| { |
| netdev->ethtool_ops = &ehea_ethtool_ops; |
| } |